Dual-Use Self-Assembled Monolayer Controlling Charge Carrier Extraction in Organic Solar Cells.

The development and use of interface materials are essential to the continued advancement of organic solar cells (OSCs) performance. Self-assembled monolayer (SAM) materials have drawn attention because of their simple structure and affordable price. Due to their unique properties, they may be used in inverted devices as a modification layer for modifying ZnO or as a hole transport layer (HTL) in place of typical poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) in conventional devices. In this work, zinc oxide (ZnO) is modified using five structurally similar SAM materials. This resulted in a smoother surface, a decrease in work function, a suppression of charge recombination, and an increase in device efficiency and photostability. In addition, they can introduced asfor hole extraction layer between the active layer and MoO3 , enabling the use of the same material at several functional layers in the same device. Through systematic orthogonal evaluation, it is shown that some SAM/active layer/SAM combinations still offered device efficiencies comparable to ZnO/SAM, but with improved device' photostability. This study may provide recommendations for future SAM material's design and development as well as a strategy for boosting device performance by using the same material across both sides of the photoactive layer in OSCs.

Electronic and Photochemical Passivation by a Classic Sunscreen Material Leading to Reduced Voc Losses and Enhanced Stability in Organic Solar Cells.

Organic solar cells (OSCs) have been a popular topic of research for a long time. As a well-known electron transport layer (ETL) material for inverted device architecture, sol-gel-derived zinc oxide (ZnO) displays certain defective surfaces that cause excessive charge recombination and lower device performance. While ultraviolet (UV)-light soaking is sometimes necessary for the ZnO layer to function properly, the latter can also cause the photodegradation of conjugated organic semiconductors. The photostability of OSCs has always been a hot research topic, as the radiation of UV light may cause changes in the material's properties, and that, in turn, may cause rapid attenuation of the devices. Herein, ZnO is modified by inserting the commonly used sunscreen ingredient benzophenone-3 (BP-3) between the photoactive layer, consisting of a PM6:Y6 blend, and ZnO to reduce the impact of UV radiation on the photosensitive layer. The addition of BP-3 successfully enhances the photovoltaic parameters, and a remarkable open-circuit voltage (Voc) value of 0.887 V is obtained for PM6:Y6-based inverted solar cells, corresponding to a Voc loss as small as 0.547 V. Finally, the application of this strategy increases the device's power conversion efficiency from 12.44 to 13.71% and provides improved UV stability.

Absolute energy levels in nanodiamonds of different origins and surface chemistries.

Nanodiamonds (NDs) are versatile, broadly available nanomaterials with a set of features highly attractive for applications from biology over energy harvesting to quantum technologies. Via synthesis and surface chemistry, NDs can be tuned from the sub-micron to the single-digit size, from conductive to insulating, from hydrophobic to hydrophilic, and from positively to negatively charged surface by simple annealing processes. Such ND diversity makes it difficult to understand and take advantage of their electronic properties. Here we present a systematic correlated study of structural and electronic properties of NDs with different origins and surface terminations. The absolute energy level diagrams are obtained by the combination of optical (UV-vis) and photoelectron (UPS) spectroscopies, Kelvin probe measurements, and energy-resolved electrochemical impedance spectroscopy (ER-EIS). The energy levels and density of states in the bandgap of NDs are correlated with the surface chemistry and structure characterized by FTIR and Raman spectroscopy. We show profound differences in energy band shifts (by up to 3 eV), Fermi level position (from p-type to n-type), electron affinity (from +0.5 eV to -2.2 eV), optical band gap (5.2 eV to 5.5 eV), band gap states (tail or mid-gap), and electrical conductivity depending on the high-pressure, high-temperature and detonation origin of NDs as well as on the effects of NDs' oxidation, hydrogenation, sp2/sp3 carbon phases and surface adsorbates. These data are fundamental for understanding and designing NDs' optoelectrochemical functional mechanisms in diverse application areas.

How varying surface wettability of different PEDOT:PSS formulations and their mixtures affects perovskite crystallization and the efficiency of inverted perovskite solar cells.

The physico-chemical interaction, surface, and electrical properties of hole transport layers (HTLs) significantly affect the wettability and film crystallization of the deposited perovskite and the corresponding performance of inverted perovskite solar cells (PSCs). One of the most frequently used HTLs for inverted PSCs is poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS). Various commercial PEDOT:PSS formulations have already been tested as HTLs. Until now mixtures of these remained rather unexplored. In this study, three commercially available PEDOT:PSS formulations (PH, PH1000, and AI4083), as well as three mixtures (PH:PH1000, PH:AI4083, and PH:PH1000:AI4083; in a 1 : 1 and 1 : 1 : 1 ratios) were used as HTLs to investigate the crystallization of perovskite films and the performance of associated PSCs. Of the three formulations, PEDOT:PSS PH showed better perovskite crystallization, resulting in better solar cell performance followed by both PH:AI4083 and PH:PH1000:AI4083 layers. The pioneering work on mixing PEDOT:PSS resulted in new combinations of PEDOT:PSS, with new properties (work function, surface wettability, and roughness) which are very important parameters for perovskite crystallization and corresponding device efficiencies and stabilities. All PSCs that use the mixed PEDOT:PSS as HTLs revealed higher fill factor and open-circuit voltage values above 900 mV, which is not the same except for PEDOT:PSS PH. As a result, we believe that such a mixing strategy could aid in the creation of various PEDOT:PSS combinations with tuneable properties for certain applications.

Electrode-free visual prosthesis/exoskeleton control using augmented reality glasses in a first proof-of-technical-concept study.

In the field of neuroprosthetics, the current state-of-the-art method involves controlling the prosthesis with electromyography (EMG) or electrooculography/electroencephalography (EOG/EEG). However, these systems are both expensive and time consuming to calibrate, susceptible to interference, and require a lengthy learning phase by the patient. Therefore, it is an open challenge to design more robust systems that are suitable for everyday use and meet the needs of patients. In this paper, we present a new concept of complete visual control for a prosthesis, an exoskeleton or another end effector using augmented reality (AR) glasses presented for the first time in a proof-of-concept study. By using AR glasses equipped with a monocular camera, a marker attached to the prosthesis is tracked. Minimal relative movements of the head with respect to the prosthesis are registered by tracking and used for control. Two possible control mechanisms including visual feedback are presented and implemented for both a motorized hand orthosis and a motorized hand prosthesis. Since the grasping process is mainly controlled by vision, the proposed approach appears to be natural and intuitive.

Non-contact visual control of personalized hand prostheses/exoskeletons by tracking using augmented reality glasses.

A new concept for robust non-invasive optical activation of motorized hand prostheses by simple and non-contact commands is presented. In addition, a novel approach for aiding hand amputees is shown, outlining significant progress in thinking worth testing. In this, personalized 3D-printed artificial flexible hands are combined with commercially available motorized exoskeletons, as they are used e.g. in tetraplegics.

Fast, robust, and accurate monocular peer-to-peer tracking for surgical navigation.

PURPOSE: This work presents a new monocular peer-to-peer tracking concept overcoming the distinction between tracking tools and tracked tools for optical navigation systems. A marker model concept based on marker triplets combined with a fast and robust algorithm for assigning image feature points to the corresponding markers of the tracker is introduced. Also included is a new and fast algorithm for pose estimation. METHODS: A peer-to-peer tracker consists of seven markers, which can be tracked by other peers, and one camera which is used to track the position and orientation of other peers. The special marker layout enables a fast and robust algorithm for assigning image feature points to the correct markers. The iterative pose estimation algorithm is based on point-to-line matching with Lagrange-Newton optimization and does not rely on initial guesses. Uniformly distributed quaternions in 4D (the vertices of a hexacosichora) are used as starting points and always provide the global minimum. RESULTS: Experiments have shown that the marker assignment algorithm robustly assigns image feature points to the correct markers even under challenging conditions. The pose estimation algorithm works fast, robustly and always finds the correct pose of the trackers. Image processing, marker assignment, and pose estimation for two trackers are handled in less than 18 ms on an Intel i7-6700 desktop computer at 3.4 GHz. CONCLUSION: The new peer-to-peer tracking concept is a valuable approach to a decentralized navigation system that offers more freedom in the operating room while providing accurate, fast, and robust results.

Revelation of Interfacial Energetics in Organic Multiheterojunctions.

Efficient charge generation via exciton dissociation in organic bulk heterojunctions necessitates donor-acceptor interfaces, e.g., between a conjugated polymer and a fullerene derivative. Furthermore, aggregation and corresponding structural order of polymer and fullerene domains result in energetic relaxations of molecular energy levels toward smaller energy gaps as compared to the situation for amorphous phases existing in homogeneously intermixed polymer:fullerene blends. Here it is shown that these molecular energy level shifts are reflected in interfacial charge transfer (CT) transitions and depending on the existence of disordered or ordered interfacial domains. It can be done so by systematically controlling the order at the donor-acceptor interface via ternary blending of semicrystalline and amorphous model polymers with a fullerene acceptor. These variations in interfacial domain order are probed with luminescence spectroscopy, yielding various transition energies due to activation of different recombination channels at the interface. Finally, it is shown that via this analysis the energy landscape at the organic heterojunction interface can be obtained.

MITK-OpenIGTLink for combining open-source toolkits in real-time computer-assisted interventions.

PURPOSE: Due to rapid developments in the research areas of medical imaging, medical image processing and robotics, computer-assisted interventions (CAI) are becoming an integral part of modern patient care. From a software engineering point of view, these systems are highly complex and research can benefit greatly from reusing software components. This is supported by a number of open-source toolkits for medical imaging and CAI such as the medical imaging interaction toolkit (MITK), the public software library for ultrasound imaging research (PLUS) and 3D Slicer. An independent inter-toolkit communication such as the open image-guided therapy link (OpenIGTLink) can be used to combine the advantages of these toolkits and enable an easier realization of a clinical CAI workflow. METHODS: MITK-OpenIGTLink is presented as a network interface within MITK that allows easy to use, asynchronous two-way messaging between MITK and clinical devices or other toolkits. Performance and interoperability tests with MITK-OpenIGTLink were carried out considering the whole CAI workflow from data acquisition over processing to visualization. RESULTS: We present how MITK-OpenIGTLink can be applied in different usage scenarios. In performance tests, tracking data were transmitted with a frame rate of up to 1000 Hz and a latency of 2.81 ms. Transmission of images with typical ultrasound (US) and greyscale high-definition (HD) resolutions of [Formula: see text] and [Formula: see text] is possible at up to 512 and 128 Hz, respectively. CONCLUSION: With the integration of OpenIGTLink into MITK, this protocol is now supported by all established open-source toolkits in the field. This eases interoperability between MITK and toolkits such as PLUS or 3D Slicer and facilitates cross-toolkit research collaborations. MITK and its submodule MITK-OpenIGTLink are provided open source under a BSD-style licence ( http://mitk.org ).

Irradiation-induced degradation of PTB7 investigated by valence band and S 2p photoelectron spectroscopy.

Monochromatic radiation with known absolute radiant power from an undulator at the electron storage ring Metrology Light Source (MLS) was used to irradiate PTB7 (a thieno[3, 4-b]thiophene-alt-benzodithiophene polymer) thin films at wavelengths (photon energies) of 185 nm (6.70 eV), 220 nm (5.64 eV), 300 nm (4.13 eV), 320 nm (3.88 eV), 356 nm (3.48 eV) and 675 nm (1.84 eV) under ultra-high vacuum conditions for the investigation of radiation-induced degradation effects. The characterization of the thin films is focused at ultraviolet photoelectron spectroscopy (UPS) of valence bands and is complemented by S 2p x-ray photoelectron spectroscopy (S 2p XPS) before and after the irradiation procedure. The radiant exposure was determined for each irradiation by means of photodiodes traceably calibrated to the international system of units SI. The valence band spectra show the strongest changes for the shortest wavelengths and no degradation effect at 356 nm and 675 nm even with the highest radiant exposure applied. In the spectral range where the Sun appears bright on the Earth's surface, no degradation effects are observed.

Effect of Side Chains on Molecular Conformation of Anthracene-Ethynylene-Phenylene-Vinylene Oligomers: A Comparative Density Functional Study With and Without Dispersion Interaction.

Using density functional calculations with and without dispersion interaction, we studied the effects of linear octyl and branched 2-ethylhexyl side chains on the oligomer conformation of the conjugated copolymer poly(p-anthracene-ethynylene)-alt-poly(p-phenylene-vinylene). With dispersion included, the branched side chains can cause significant bending of the oligomer backbone, while without dispersion they induce mainly torsional disorder. The oligomers with mainly linear side chains keep good planarity when optimized with and without dispersion. Despite their dramatically different conformations, the calculated absorption spectra of the oligomers with various side chain combinations are very similar, indicating that the conformation of the copolymer is not the main reason for the experimentally observed different spectra of ordered and disordered phases.

Controlling Exciton Diffusion and Fullerene Distribution in Photovoltaic Blends by Side Chain Modification.

The influence of crystallinity on exciton diffusion and fullerene distribution was investigated by blending amorphous and semicrystalline copolymers. We measured exciton diffusion and fluorescence quenching in such blends by dispersing fullerene molecules into them. We find that the diffusion length is more than two times higher in the semicrystalline copolymer than in the amorphous copolymer. We also find that fullerene preferentially mixes into disordered regions of the polymer film. This shows that relatively small differences in molecular structure are important for exciton diffusion and fullerene distribution.

Comparative Indoor and Outdoor Degradation of Organic Photovoltaic Cells via Inter-laboratory Collaboration.

We report on the degradation of organic photovoltaic (OPV) cells in both indoor and outdoor environments. Eight different research groups contributed state of the art OPV cells to be studied at Pomona College. Power conversion efficiency and fill factor were determined from IV curves collected at regular intervals over six to eight months. Similarly prepared devices were measured indoors, outdoors, and after dark storage. Device architectures are compared. Cells kept indoors performed better than outdoors due to the lack of temperature and humidity extremes. Encapsulated cells performed better due to the minimal oxidation. Some devices showed steady aging but many failed catastrophically due to corrosion of electrodes not active device layers. Degradation of cells kept in dark storage was minimal over periods up to one year.

Morphology, Crystal Structure and Charge Transport in Donor-Acceptor Block Copolymer Thin Films.

We studied structure and charge transport properties of thin films of donor-acceptor block copolymers, poly(3-hexylthiophene-block-perylene bisimide acrylate), using a combination of X-ray scattering, AFM and vertical charge transport measurements in diode devices. Block copolymer self-assembly and crystallization of the individual components are interrelated and different structural states of the films could be prepared by varying preparation conditions and thermal history. Generally the well-defined microphase structures found previously in bulk could also be prepared in thin films, in addition alignment induced by interfacial interactions was observed. Microphase separated block copolymers sustain ambipolar charge transport, but the exact values of electron and hole mobilities depend strongly on orientation and connectivity of the microdomains as well as the molecular order within the domains.

Long-term stabilization of organic solar cells using hindered phenols as additives.

We report on the improvement of long-term stability of organic solar cells (OPV) using hindered phenol based antioxidants as stabilizing additives. A set of seven commercially available hindered phenols are investigated for use in bulk-heterojunction OPV. Polymer:fullerene films based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) are characterized with respect to the initial power conversion efficiency and the long-term stability improvement under illumination in ambient conditions. FTIR spectroscopy is used to trace chemical degradation over time. OPV performance is recorded under ISOS-3 conditions, and an improved long-term performance of OPV devices, manifested in increased accumulated power generation (APG), is found for octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate. Using this additive, APG is increased by a factor of 3 compared to the reference. Observed differences in the stabilization of tested additives are discussed in terms of energetic trap states formation within the HOMO/LUMO gap of the photoactive material, morphological changes, and chemical structure.

Modification of the active layer/PEDOT:PSS interface by solvent additives resulting in improvement of the performance of organic solar cells.

The influence of various polar solvent additives with different dipole moments has been investigated since the performance of a photovoltaic device comprising a donor-acceptor copolymer (benzothiadiazole-fluorene-diketopyrrolopyrrole (BTD-F-DKPP)) and phenyl-C60-butyric acid methyl ester (PCBM) was notably increased. A common approach for controlling bulk heterojunction morphology and thereby improving the solar cell performance involves the use of solvent additives exhibiting boiling points higher than that of the surrounding solvent in order to allow the fullerene to aggregate during the host solvent evaporation and film solidification. In contrast to that, we report the application of polar solvent additives with widely varied dipole moments, where intentionally no dependence on their boiling points was applied. We found that an appropriate amount of the additive can improve all solar cell parameters. This beneficial effect could be largely attributed to a modification of the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-active layer interface within the device layer stack, which was successfully reproduced for polymer solar cells based on the commonly used PCDTBT (poly[N-900-hepta-decanyl-2,7-carbazole-alt-5,5-(40,70-di-2-thienyl-20,10,30-benzothiadiazole)]) copolymer.

Control of charge generation and recombination in ternary polymer/polymer:fullerene photovoltaic blends using amorphous and semi-crystalline copolymers as donors.

Charge generation and recombination processes occurring in ternary photoactive copolymer:copolymer:fullerene blends consisting of different mixing ratios between entirely amorphous and semi-crystalline PPE-PPV copolymers are investigated by transient absorption pump-probe and pump-push photocurrent spectroscopy. The experiments reveal that an excess of semi-crystalline polymer facilitates exciton dissociation into free charge carriers, slows down geminate recombination, and suppresses non-geminate recombination leading to increased short-circuit currents and high fill factors. In contrast, blends utilizing solely the amorphous polymer for their donor phase suffer from a large fraction of sub-nanosecond geminate recombination of interfacially bound charge-transfer states and also from fast non-geminate recombination of free charges, resulting in a significantly reduced photovoltaic performance. However, small fractions of the amorphous polymer blended into the semi-crystalline polymer increase the open-circuit voltage and the fill factor, while keeping the charge generation and recombination parameters largely unaltered in turn leading to an optimized device performance for the ternary PPE-PPV copolymer:copolymer:fullerene blends.

Sub-bandgap absorption in organic solar cells: experiment and theory.

Most high-performance organic solar cells involve bulk-heterojunctions in order to increase the active donor-acceptor interface area. The power conversion efficiency depends critically on the nano-morphology of the blend and the interface. Spectroscopy of the sub-bandgap region, i.e., below the bulk absorption of the individual components, provides unique opportunities to study interface-related properties. We present absorption measurements in the sub-bandgap region of bulk heterojunctions made of poly(3-hexylthiophene-2,5-diyl) as an electron donor and [6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) as an electron acceptor and compare them with quantum-chemical calculations and recently published data on the external quantum efficiency (EQE). The very weak absorption of the deep sub-bandgap region measured by the ultra-sensitive Photothermal Deflection Spectroscopy (PDS) features Urbach tails, polaronic transitions, conventional excitons, and possibly charge-transfer states. The quantum-chemical calculations allow characterizing some of the unsettled spectral features.