RESUMO
The goal of study was to explore the role of 3D CBCT (cone beam computer tomography) in detecting impacted canines and their movement to evaluate the influence of orthodontic therapy parameters on treatment options, and to monitor quality of healing process based on shape and size of sinus maxillae volume. It is known that the volume of maxillary sinus plays an important role in patients with impacted teeth. The prospective study consisted of 26 individuals. For each individual, pre-treatment and post-treatment CBCT data were acquired. Changes of size, and position of impacted canine in 3D CBCT image before and after therapy were prepared using 3D reconstruction. Volumetric measurements of the maxillary sinuses were performed before and after orthodontic therapy of impacted canines, using InVivo6 software. The main effects MANOVA performed on linear measurements showed metric differences between pre-op and post-op images. A paired t-test showed no statistically significant differences between pre-op and post-op values of the sinus volume. Changes of size and position of impacted canine in 3D image before and after therapy were precise and reproducible, using 3D reconstruction in three planes - horizontal, midsagittal, and coronal. The linear measurements showed metric differences between pre-op and post-op images.
Assuntos
Dente Impactado , Humanos , Dente Impactado/diagnóstico por imagem , Dente Impactado/terapia , Estudos Prospectivos , Seio Maxilar/diagnóstico por imagem , Dente Canino/diagnóstico por imagem , Imageamento Tridimensional/métodos , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
A dual-output thin-disk picosecond laser operating at 100 W with 1 kHz repetition rate is reported in this Letter. By electronically adjusting the amplitude of the optical seed pulses that are injected into the laser cavity, the energy extracted from the gain medium can be shared between two pulses. Amplified double pulses are subsequently spatially separated into two independent beams by a fast Pockels cell, compressed in one common compressor, and frequency-doubled with â¼70% efficiency. This approach significantly decreases strain on the optics, as well as nonlinear effects, and is advantageous for power scaling.
RESUMO
We report on a 1 kHz, 515 nm laser system, based on a commercially available 230 W average power Yb:YAG thin-disk regenerative amplifier, developed for pumping one of the last optical parametric chirped pulse amplification (OPCPA) stages of the Allegra laser system at ELI Beamlines. To avoid problems with self-focusing of picosecond pulses, the 1030 nm output pulses are compressed and frequency doubled with an LBO crystal in vacuum. Additionally, development of a thermal management system was needed to ensure stable phase matching conditions at high average power. The resulting 515 nm pulses have an energy of more than 120 mJ with SHG efficiency of 60% and an average RMS stability of 1.1% for more than 8 h.
RESUMO
Xmipp is an open-source software package consisting of multiple programs for processing data originating from electron microscopy and electron tomography, designed and managed by the Biocomputing Unit of the Spanish National Center for Biotechnology, although with contributions from many other developers over the world. During its 25 years of existence, Xmipp underwent multiple changes and updates. While there were many publications related to new programs and functionality added to Xmipp, there is no single publication on the Xmipp as a package since 2013. In this article, we give an overview of the changes and new work since 2013, describe technologies and techniques used during the development, and take a peek at the future of the package.
RESUMO
Forensic dental identification has employed traditionally 2D digital radiological imaging techniques. More recently, 3D cone beam computer tomography (CBCT) data, widely applied in clinical dentistry, have been gradually used. The purpose of this study was to compare the precision and quality of 2D digital orthopantomogram (OPG) and 2D OPG images generated from cone beam computed tomography (CBCT). The study sample consisted of 50 patients with archived conventional 2D OPG and 3D CBCT images. Patients signed an informed consent form to take part in our study. Measurements of the mandible, teeth and dental restorations were taken by two observers on calibrated 2D OPG and 3D CBCT-to-OPG images using measurement functionalities of DOPLHIN software. Acquired dimensions were compared side by side and images of fillings were superimposed. For better visual comparison and more efficient image registration, the methods of spline interpolation were used. The pairs of absolute measurements obtained from conventional OPG and CBCT-to-OPG-converted images were highly correlated (p < 0.05). However, larger, and horizontally measured distances were revealed to be more affected than shorter vertically taken measurements. In relative terms, CBCT-generated width/length indices of the canines and the first molars ranged from 84% to 99.8% of those acquired from traditional OPGs. In addition, corresponding points on the teeth and fillings were compared side by side and in superimposition. The average coincidence of images was 6.1%. The results revealed that for selected metric variables 2D OPGs and 3D CBCT-generated OPGs were complementary and could be used for forensic comparisons.
Assuntos
Tomografia Computadorizada de Feixe Cônico/métodos , Odontologia Legal , Radiografia Dentária Digital/métodos , Radiografia Panorâmica/métodos , Restauração Dentária Permanente , Odontologia Legal/métodos , Humanos , Mandíbula , Sensibilidade e Especificidade , DenteRESUMO
We report on the design and performance of a fiber-based, multi-channel laser amplifier seed pulse distribution system. The device is designed to condition and distribute low energy laser pulses from a mode-locked oscillator to multiple, highly synchronized, high energy amplifiers integrated into a laser beamline. Critical functions such as temporal pulse stretching well beyond 100 ps/nm, pulse picking, and fine control over the pulse delay up to 300 ps are all performed in fiber eliminating the need for bulky and expensive grating stretchers, Pockels cells, and delay lines. These functions are characterized and the system as a whole is demonstrated by seeding two high energy amplifiers in the laser beamline. The design of this system allows for complete computer control of all functions, including tuning of dispersion, and is entirely hands-free. The performance of this device and its subsystems will be relevant to those developing lasers where reliability, size, and cost are key concerns in addition to performance; this includes those developing large-scale laser systems similar to ours and also those developing table-top experiments and commercial systems.
RESUMO
We report on a broadband OPCPA system, pumped at 515 nm by frequency doubled Yb:YAG thin disk lasers. The system delivers 11.3 mJ pulses at a central wavelength of 800 nm with a spatial beam quality of M2 = 1.25 and > 25% pump-to-signal conversion efficiency. The broadband pulses were demonstrated to be compressible to 12 fs using a chirped mirror compressor.
RESUMO
We report on a frequency-doubled picosecond Yb:YAG thin disk regenerative amplifier, developed as a pump laser for a kilohertz repetition rate OPCPA. At a repetition rate of 1 kHz, the compressed output of the regenerative amplifier has a pulse duration of 1.2 ps and pulse energy of 90 mJ with energy stability of σ < 0.8% and M2 < 1.2. The pulses are frequency doubled in an LBO crystal yielding 42 mJ at 515 nm.
RESUMO
We identified a de novo deletion of 14q11.2 in a Czech patient with developmental delay, mild autistic features, macrosomy, macrocephaly, orthognathic deformities, and dysmorphic facial features. The clinical follow-up of the patient lasting 14 years documented changes in the facial dysmorphism from infancy to adolescence. The deletion affects approximately 200 kb of DNA with five protein-coding genes and two snoRNA genes. Two of the protein-coding genes, SUPT16H and CHD8, have been proposed as candidate genes for a new microdeletion syndrome. Our patient further supports the existence of this syndrome and extends its phenotypic spectrum, especially points to the possibility that orthognathic deformities may be associated with microdeletions of 14q11.2. CHD8 mutations have been found in patients with neurodevelopmental disorders and macrocephaly. The HNRNPC gene, repeatedly deleted in patients with developmental delay, is another candidate as its 5Ì end is adjacent to the deletion, and the expression of this gene may be affected by position effect.