Tris-Azo Triangular Paraphenylenes: Synthesis and Reversible Interconversion into Radial π-Conjugated Macrocycles.

We report the synthesis of cycloparaphenylene derivatives featuring tris-azo groups. The smaller derivative, [3]cycloazobenzene, adopts a triangular all-cis form and exhibits thermally and photochemically stable characteristics due to significant ring strain as well as symmetric Kagome-patterned crystal packing. In contrast, the as-synthesized [3]cycloazobenzene with three biphenylene bridges adopts a triangular all-cis form, which undergoes photoinduced isomerization, leading to a photostationary state. Interestingly, the addition of an excess of acid selectively leads to the formation of an all-trans form. DFT calculations reveal that the interconversion from a triangular to a circular shape correlates with an increase in HOMO and a decrease in LUMO, characteristics intrinsic to radial π-conjugated systems.

High-Intensity Circular Dichroism of Head-To-Tail Regioregular Poly(1,4-Phenylene)s in the Aggregated State.

Circular dichroism (CD) studies on poly(1,4-phenylene)s bearing a chiral side chain in the aggregated conditions were carried out. Little CD was observed in a solution form, while addition of a poor solvent into the polyphenylene solution induced aggregation and a strong CD was observed, accordingly. Applying the controlled degree of polymerization (DP) of poly(1,4-phenylene) in the use of bidentate diphosphine Chiraphos as a ligand for the nickel catalyst, the relationship of DP with CD strength was studied to reveal to show the highest CD at the DP=84 (gabs=ca. 2×10-2). It was also found that the related aggregation was observed in good solvent 1,2-dichloroethane upon standing the solution at 4 °C for 3-23 days to observe gabs=ca. 10-1. Studies on the substituent effect of poly(1,4-phenylene) suggested that CD behaviors were dependent on the type of non-chiral substituent on the aromatic ring as well as the side-chain chirality.

Designing 2D stripe winding network through crown-ether intermediate Ullmann coupling on Cu(111) surface.

Chemical synthesis typically yields the most thermodynamically stable ordered arrangement, a principle also governing surface synthesis on an atomically level two-dimensional (2D) surface, fostering the creation of structured 2D formations. The linear connection arising from energetically stable chemical bonding precludes the generation of a 2D random network comprised of one-dimensional (1D) convoluted stripes through on-surface synthesis. Nonetheless, we underscored that on-surface synthesis possesses the capability not solely to fashion a 2D ordered linear network but also to fabricate a winding 2D network employing a precursor with a soft ring and intermediate state bonding within the Ullmann reaction. Here, on-surface synthesis was exhibited on Cu(111) employing a 2D self-assembled monolayer array of 4,4',5,5'-tetrabromodibenzo[18]crown-6 ether (BrCR) precursors. These precursors were purposefully structured, with a crown ether ring at the core and Br atoms positioned at the head and tail ends, facilitating preferential connections along the elongated axis to foster a 1D stripe configuration. We illustrate how adjustments in the quantities of the intermediate state, serving as a primary linkage, can yield a labyrinthine, convoluted winding 2D network of stripes. The progression of growth, underlying mechanisms, and electronic structures were scrutinized using an ultrahigh vacuum low-temperature scanning tunneling microscopy and spectroscopy (STM/STS) setup combined with density functional theory (DFT) calculations. This experimental evidence opens a novel functionality in leveraging on-surface synthesis for the formation of a 2D random network. This discovery holds promise as a pioneering constituent in the construction of a ring host supramolecule, augmenting its capability to ensnare guest atoms, molecules, or ions.

A Ni0(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) complex as a catalyst precursor for oligothiophene and polythiophene synthesis.

Nickel-catalyzed syntheses of oligothiophene and polythiophene were carried out with Ni(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) as a catalyst precursor. Studies on the ligand exchange of Ni(cod)(dq) revealed that a high temperature was necessary to replace COD and DQ with PPh3 and N-heterocyclic carbene IPr. A coupling reaction of a metalated 3-hexylthiophene with 2-chloro-3-hexylthiophene employing Ni(cod)(dq) with IPr proceeded with a remarkably reduced amount of homocoupling byproduct. Polymerization of 2-chloro-3-hexylthiophene with Ni(cod)(dq)/DPPP also resulted in the reduction of the regioregularity defect.

Photosalience and Thermal Phase Transitions of Azobenzene- and Crown Ether-Based Complexes in Polymorphic Crystals.

Stimuli-responsive molecular crystals have attracted considerable attention as promising smart materials with applications in various fields such as sensing, actuation, and optoelectronics. Understanding the structure-mechanical property relationships, however, remains largely unexplored when it comes to functionalizing these organic crystals. Here, we report three polymorphic crystals (Forms A, B, and C) formed by the non-threaded complexation of a dibenzo[18]crown-6 (DB18C6) ether ring and an azobenzene-based ammonium cation, each exhibiting distinct thermal phase transitions, photoinduced deformations, and mechanical behavior. Structural changes on going from Form A to Form B and from Form C to Form B during heating and cooling, respectively, are observed by single-crystal X-ray crystallography. Form A shows photoinduced reversible bending, whereas Form B exhibits isotropic expansion. Form C displays uniaxial negative expansion with a remarkable increase of 44% in thickness under photoirradiation. Force measurements and nanoindentation reveal that the soft crystals of Form A with a low elastic modulus demonstrate a significant photoresponse, attributed to the non-threaded molecular structure, which permits flexibility of the azobenzene unit. This work represents a significant advance in the understanding of the correlation between structure-thermomechanical and structure-photomechanical properties necessary for the development of multi-stimulus-responsive materials with tailored properties.

Facile Photoresponsive Actuators Based on Ferrocene-Doped Poly(butyl methacrylate).

This paper presents facile photoresponsive actuators comprising ferrocene as a guest chromophore and poly(butyl methacrylate) (PBMA) as a host matrix. The ferrocene-doped PBMA film exhibits mechanical expansion and contraction when a 445 nm laser is turned on and off, respectively. The photoresponsive film is attached by a commercially available acetylcellulose adhesive tape, which exhibits a bending motion that is controlled by turning the laser on and off. Thereafter, the double-layer film is employed to fabricate a table-shaped lifting machine (0.7 mg) that lifts a 10.5 mg object up and down by turning the laser on and off, respectively, and the mechanical force offered by the double-layer film is recorded. Additionally, the film is coated with gold and applied to an electric circuit that serves as a reversible photoresponsive switch. This film preparation technique is applied to other chromophores (e.g., Coumarin 343, Rhodamine 6G, Sudan Blue II, and Solvent Green 3) to independently control the motions of the films with 445, 520, and 655 nm lasers. The ferrocene-containing films also exhibit photoinduced healing from mechanical damage. Finally, the photoirradiation-accompanied morphological changes in the film are observed via small-angle X-ray scattering.

Ferrocene-Containing Pseudorotaxanes in Crystals: Aromatic Interactions with Hammett Correlation.

Single crystals of pseudorotaxanes, [(FcCH2NH2CH2Ar)(DB24C8)][PF6] (DB24C8 = dibenzo[24]crown-8, Fc = Fe(C5H4)(C5H5), Ar = -C6H3-3,4-Cl2, -C6H3-3,4-F2, -C6H4-4-F, -C6H4-4-Cl, -C6H4-4-Br, -C6H3-3-F-4-Me, -C6H4-4-I) and [(FcCH2NH2CH2C6H4-4-Me)(DB24C8)][Ni(dmit)2] (dmit = 1,3-dithiole-2,4,5-dithiolate), were obtained from solutions containing DB24C8 and ferrocenylmethyl(arylmethyl)ammonium. X-ray crystallographic analyses of the pseudorotaxanes revealed that the aryl ring of the axle moiety and the catechol ring of the macrocyclic component were at close centroid distances and parallel or tilted orientation. The structures with parallel aromatic rings showed correlation of the distances between the centroids to Hammett substituent constants of the aryl groups.

Hydrophobic and Hydrophilic Conjugated Polymer Dots as Binary Photocatalysts for Enhanced Visible-Light-Driven Hydrogen Evolution through Förster Resonance Energy Transfer.

Organic semiconducting polymers exhibited promising photocatalytic behavior for hydrogen (H2) evolution, especially when prepared in the form of polymer dots (Pdots). However, the Pdot structures were formed using common nonconjugated amphiphilic polymers, which have a negative effect on charge transfer between photocatalysts and reactants and are unable to participate in the photocatalytic reaction. This study presents a new strategy for constructing binary Pdot photocatalysts by replacing the nonconjugated amphiphilic polymer typically employed in the preparation of polymer nanoparticles (Pdots) with a low-molecular-weight conjugated polyelectrolyte. The as-prepared polyelectrolyte/hydrophobic polymer-based binary Pdots truly enhance the electron transfer between the Pt cocatalyst and the polymer photocatalyst with good water dispersibility. Moreover, unlike the nonconjugated amphiphilic polymer, the photophysics and mechanism of this photocatalytic system through time-correlated single-photon counting (TCSPC) and transient absorption (TA) measurements confirmed the Förster resonance energy transfer (FRET) between the polyelectrolyte as a donor and the hydrophobic polymer as an acceptor. As a result, the designated binary Pdot photocatalysts significantly enhanced the hydrogen evolution rate (HER) of 43 900 µmol g-1 h-1 (63.5 µmol h-1, at 420 nm) for PTTPA/PFTBTA Pdots under visible-light irradiation.

Multiple and early hyperbaric oxygen treatments enhance muscle healing after muscle contusion injury: a pilot study.

BACKGROUND: The optimal timing of hyperbaric oxygen (HBO2) treatments for the best recovery following muscle injury has yet to be determined. Thus, the optimal number and timing of HBO2 treatments for maximal muscle regeneration were explored. METHODS: The HBO2 treatment protocol consisted of 2.5 ATA 100% oxygen for 120 minutes. Muscle-injured rats were randomized to one of 10 groups: single HBO2 treatment immediately after injury (HBO 1T day 0), one day (HBO 1T day 1), three days (HBO 1T day 3) and five days (HBO 1T day 5) after injury; three HBO2 treatments from immediately after injury to two days after injury (HBO 3T day 0-2), from one to three days after injury (HBO 3T day 1-3), from three to five days after injury (HBO 3T day 3-5), from five to seven days after injury (HBO 3T day 5-7); five daily HBO2 treatments (HBO 5T); and no treatment (NT). RESULTS: HBO 5T and HBO 3T day 0-2, days 1-3 and days 3-5 significantly promoted CD206-positive cell infiltration, satellite cell differentiation and muscle regeneration compared to the NT group. CONCLUSION: Five HBO2 treatments and three HBO2 treatments within three days of injury promote muscle regeneration.

Ring rotation of ferrocene in interlocked molecules in single crystals.

This work describes unique molecular motions of ferrocene-containing interlocked molecules observed by single-crystal X-ray crystallography. The rotational flexibility of ferrocene is achieved using combinations of ferrocene-tethered ammonium and 30-membered ring dibenzo-crown ether. By contrast, ferrocene was locked in the complex with an 18-membered ring dibenzo-crown ether and CH2Cl2. When the complex was heated at 358 K, CH2Cl2 was removed from the complex, which led to drastic structural changes, including a semieclipsed-to-disordered transition of ferrocene and flipping of the dibenzo-crown ether.

Photoinduced Mechanical Motions of Pseudorotaxane Crystals Composed of Azobenzene and Ferrocenyl Groups on an Axle and a Crown Ether Ring.

This work describes the design and characterization of photoresponsive dynamic pseudorotaxane crystals composed of azobenzene and ferrocenyl groups in an ammonium cation axle component threaded through dibenzo[24]crown-8 ether rings. Pseudorotaxanes provide flexibility for cis and trans isomerization of azobenzene groups in a crystal state, enabling reversible bending motions under alternating 360 and 445 nm laser irradiation. For such bending motions, strained azobenzene structures were essential; these motifs were obtained by increasing the bulkiness of the substituents on the axle and ring molecules. In addition, the crystals showed photosalient effects, such as jumping motions, under 445 nm laser irradiation. These motions were assisted by the photoabsorption of the ferrocenyl group, which converted 445 nm laser light into heat. The maximum lifting weight accompanied by the photoinduced mechanical motion of a particular crystal was estimated to be 9600 times the crystal weight. These pseudorotaxane crystals exhibit promising features for applications in micro-nanometer-sized miniature mechanical devices.

Skipping Breakfast for 6 Days Delayed the Circadian Rhythm of the Body Temperature without Altering Clock Gene Expression in Human Leukocytes.

Breakfast is often described as "the most important meal of the day" and human studies have revealed that post-prandial responses are dependent on meal timing, but little is known of the effects of meal timing per se on human circadian rhythms. We evaluated the effects of skipping breakfast for 6 days on core body temperature, dim light melatonin onset, heart rate variability, and clock gene expression in 10 healthy young men, with a repeated-measures design. Subjects were provided an isocaloric diet three times daily (3M) or two times daily (2M, i.e., breakfast skipping condition) over 6 days. Compared with the 3M condition, the diurnal rhythm of the core body temperature in the 2M condition was delayed by 42.0 ± 16.2 min (p = 0.038). On the other hand, dim light melatonin onset, heart rate variability, and clock gene expression were not affected in the 2M condition. Skipping breakfast for 6 days caused a phase delay in the core body temperature in healthy young men, even though the sleep-wake cycle remained unchanged. Chronic effects of skipping breakfast on circadian rhythms remain to be studied.

Formal preparation of regioregular and alternating thiophene-thiophene copolymers bearing different substituents.

Differently substituted thiophene-thiophene-alternating copolymers were formally synthesized employing a halo-bithiophene as a monomer. Nickel-catalyzed polymerization of bithiophene with substituents at the 3-position, including alkyl-, fluoroalkyl-, or oligosiloxane-containing groups, afforded the corresponding copolymers in good to excellent yield. The solubility test in organic solvents was performed to reveal that several copolymers showed a superior solubility. X-ray diffraction analysis of the thin film of the alternating copolymers composed of methyl and branched oligosiloxane substituents was also performed, and the results suggested the formation of a dual-layered film structure.

VEGF and bFGF induction by nitric oxide is associated with hyperbaric oxygen-induced angiogenesis and muscle regeneration.

Hyperbaric oxygen (HBO) treatment promotes early recovery from muscle injury. Reactive oxygen species (ROS) upregulation is a key mechanism of HBO, which produces high O2 content in tissues through increased dissolution of oxygen at high pressure. Nitric oxide (NO), a type of ROS, generally stabilizes hypoxia-inducible factor (HIF) 1α and stimulates secretion of vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF) from endothelial cells and macrophages, which then induces angiogenesis. The purpose of the present study was to investigate whether HBO could promote angiogenesis via induction of NO and induce muscle regeneration in contused rat skeletal muscles. The HBO protocol consisted of 2.5 atmospheres absolute (ATA) 100% oxygen for 120 minutes, once a day for 5 consecutive days. We also evaluated the effects of a ROS inhibitor (NAC) or NOS-specific inhibitor (L-NAME) on HBO. HBO significantly increased NO3-, VEGF, and bFGF levels and stabilized HIF1α within 1 day. HBO promoted blood vessel formation at 3-7 days and muscle healing at 5-7 days after contusion. Administration of both NAC and L-NAME before HBO suppressed angiogenesis and muscle regeneration even after HBO. HBO thus promoted angiogenesis and muscle regeneration mainly through generation of NO in the early phase after muscle contusion injury.

Self-assembly and ring-opening metathesis polymerization of cyclic conjugated molecules on highly ordered pyrolytic graphite.

Cyclic conjugated monomers comprising cyclopentadithiophene-vinylene trimers and their polymers on HOPG are observed using STM and AFM. ROMP of the monomers is performed using a Grubbs catalyst. Their STM images exhibit single chains of planar polymers, whereas their AFM images show elongation of the polymer chains on HOPG.

Hyperbaric oxygen reduces inflammation, oxygenates injured muscle, and regenerates skeletal muscle via macrophage and satellite cell activation.

Hyperbaric oxygen treatment (HBO) promotes rapid recovery from soft tissue injuries. However, the healing mechanism is unclear. Here we assessed the effects of HBO on contused calf muscles in a rat skeletal muscle injury model. An experimental HBO chamber was developed and rats were treated with 100% oxygen, 2.5 atmospheres absolute for 2 h/day after injury. HBO reduced early lower limb volume and muscle wet weight in contused muscles, and promoted muscle isometric strength 7 days after injury. HBO suppressed the elevation of circulating macrophages in the acute phase and then accelerated macrophage invasion into the contused muscle. This environment also increased the number of proliferating and differentiating satellite cells and the amount of regenerated muscle fibers. In the early phase after injury, HBO stimulated the IL-6/STAT3 pathway in contused muscles. Our results demonstrate that HBO has a dual role in decreasing inflammation and accelerating myogenesis in muscle contusion injuries.

Reversible Laser-Induced Bending of Pseudorotaxane Crystals.

This study investigated the dynamic photoresponse of pseudorotaxane crystals with azobenzene and ferrocenyl groups in the axle component. X-ray crystallography showed pseudorotaxanes with a methylazobenzene group and a dibromophenylene ring in the cyclic component to exhibit twisting of the trans-azobenzene groups at torsion angles of 17° and 38°, respectively. Repeated alternating laser irradiation of the crystals at 360 and 445 nm produced bending of 20-30° in opposite directions, with no evidence of decay. Under 445 nm irradiation, bending took place within 0.3 s. A crystal of nonsubstituted pseudorotaxane showed bending of only 2° under 360 nm irradiation due to multiple π-π interactions between the planar trans-azobenzene groups. The pseudorotaxane crystals have two chromophores, bent rapidly and reversibly on irradiation at rates depending on the molecular structure.

Nuclear factor (erythroid derived 2)-like 2 activation increases exercise endurance capacity via redox modulation in skeletal muscles.

Sulforaphane (SFN) plays an important role in preventing oxidative stress by activating the nuclear factor (erythroid derived 2)-like 2 (Nrf2) signalling pathway. SFN may improve exercise endurance capacity by counteracting oxidative stress-induced damage during exercise. We assessed running ability based on an exhaustive treadmill test (progressive-continuous all-out) and examined the expression of markers for oxidative stress and muscle damage. Twelve- to 13-week-old Male wild-type mice (Nrf2 +/+) and Nrf2-null mice (Nrf2 -/-) on C57BL/6J background were intraperitoneally injected with SFN or vehicle prior to the test. The running distance of SFN-injected Nrf2 +/+ mice was significantly greater compared with that of uninjected mice. Enhanced running capacity was accompanied by upregulation of Nrf2 signalling and downstream genes. Marker of oxidative stress in SFN-injected Nrf2 +/+ mice were lower than those in uninjected mice following the test. SFN produced greater protection against muscle damage during exhaustive exercise conditions in Nrf2 +/+ mice than in Nrf2 -/- mice. SFN-induced Nrf2 upregulation, and its antioxidative effects, might play critical roles in attenuating muscle fatigue via reduction of oxidative stress caused by exhaustive exercise. This in turn leads to enhanced exercise endurance capacity. These results provide new insights into SFN-induced upregulation of Nrf2 and its role in improving exercise performance.

Dynamic Pseudorotaxane Crystals Containing Metallocene Complexes.

Molecular machines and switches composed of flexible pseudorotaxanes respond to external stimuli, transducing incident energy into mechanical motions. This study presents thermo- and photoresponsive dynamic pseudorotaxane crystals composed of axle molecules containing ferrocene or ruthenocene groups threaded through dibenzo[24]crown-8 ether rings. The ruthenocene-containing pseudorotaxane exhibits a crystal-to-crystal thermal phase transition at 86 °C, which is much lower than that of the ferrocene-containing pseudorotaxane (128 °C). Single-crystal X-ray crystallography at various temperatures reveals the details of the structural changes, and shows that the bulky ruthenocene provides distortion in the pseudorotaxane structure to facilitate twisting of the axle molecule. A mixed ferrocene and ruthenocene pseudorotaxane crystal is applied to photomechanical conversion under 405 nm laser irradiation at 85 °C and provides a lifting force 6,400-times the weight of the crystal itself upon phase transition.

Cyclopentadithiophene-benzoic acid copolymers as conductive binders for silicon nanoparticles in anode electrodes of lithium ion batteries.

Cyclopentadithiophene and methyl-2,5-dibromobenzoate have been copolymerised via palladium complex catalysed direct arylation. The methyl ester group in the benzoate unit is converted to the carboxyl group via saponification. The polymers are mixed with Si nanoparticles for use as conducting binders in the fabrication of an anode electrode in lithium ion batteries. The battery with the electrode incorporating the saponified polymer shows much higher specific capacity of up to 1820 mA h g-1 (total weight) and a higher stability compared with the battery including the polymer before the saponification.