A novel PEG-mediated approach to entrap hemoglobin (Hb) within ZIF-8 nanoparticles: Balancing crystalline structure, Hb content and functionality.

Hemoglobin (Hb)-based oxygen carriers are investigated as a potential alternative or supplement to regular blood transfusions, particularly in critical and life-threatening scenarios. These include situations like severe trauma in remote areas, battlefield conditions, instances where blood transfusion is not feasible due to compatibility concerns, or when patients decline transfusions based on religious beliefs. This study introduces a novel method utilizing poly(ethylene glycol) (PEG) to entrap Hb within ZIF-8 nanoparticles (i.e., Hb@ZIF-8 NPs). Through meticulous screening, we achieved Hb@ZIF-8 NPs with a record-high Hb concentration of 34 mg mL-1. These NPs, sized at 168 nm, displayed exceptional properties: a remarkable 95 % oxyhemoglobin content, excellent encapsulation efficiency of 85 %, and resistance to Hb oxidation into methemoglobin (metHb). The addition of PEG emerged as a crucial factor amplifying Hb entrapment within ZIF-8, especially at higher Hb concentrations, reaching an unprecedented 34 mg mL-1. Importantly, PEG exhibited a protective effect, preventing metHb conversion in Hb@ZIF-8 NPs at elevated Hb concentrations.

Enzyme-loaded rod-like microgel shapes: a step towards the creation of shape-specific microreactors for blood detoxification purposes.

Rapid removal of toxic substances is crucial to restore the normal functions of our body and ensure survival. Due to their high substrate specificity and catalytic efficiency, enzymes are unique candidates to deplete toxic compounds. While enzymes display several limitations including low stability and high immunogenicity, these can be overcome by entrapping them in a diverse range of carriers. The resulting micro/nanoreactors shield the enzymes from their surroundings, preventing their misfolding or denaturation thus allowing them to conduct their function. The micro/nanoreactors must circulate in the blood stream for extended periods of time to ensure complete depletion of the toxic agents. Surprisingly, while it is widely acknowledged that non-spherical carriers exhibit longer residence time in the bloodstream than their spherical counterparts, so far, all the reported micro/nanoreactors have been assembled with a spherical architecture. Herein, we address this important issue by pioneering the first shape-specific microreactors. We use UV-assisted punching to create rod-like microgel shapes with dimensions of 8 µm × 1 µm × 2 µm and demonstrate their biocompatibility by conducting hemolysis and cell viability assays with a macrophage and an endothelial cell line. Upon encapsulation of the model enzyme ß-lactamase, the successful fabrication of rod-shaped microreactors is demonstrated by their ability to convert the yellow nitrocefin substrate into its hydrolyzed product.

Synthesis of bioactive hemoglobin-based oxygen carrier nanoparticles via metal-phenolic complexation.

The transfusion of donor red blood cells (RBCs) is seriously hampered by important drawbacks that include limited availability and portability, the requirement of being stored in refrigerated conditions, a short shelf life or the need for RBC group typing and crossmatching. Thus, hemoglobin (Hb)-based oxygen (O2) carriers (HBOCs) which make use of the main component of RBCs and the responsible protein for O2 transport, hold a lot of promise in modern transfusion and emergency medicine. Despite the great progress achieved, it is still difficult to create HBOCs with a high Hb content to attain the high O2 demands of our body. Herein a metal-phenolic self-assembly approach that can be conducted in water and in one step to prepare nanoparticles (NPs) fully made of Hb (Hb-NPs) is presented. In particular, by combining Hb with polyethylene glycol, tannic acid (TA) and manganese ions, spherical Hb-NPs with a uniform size around 350-525 nm are obtained. The functionality of the Hb-NPs is preserved as shown by their ability to bind and release O2 over multiple rounds. The binding mechanism of TA and Hb is thoroughly investigated by UV-vis absorption and fluorescence spectroscopy. The binding site number, apparent binding constant at two different temperatures and the corresponding thermodynamic parameters are identified. The results demonstrate that the TA-Hb interaction takes place through a static mechanism in a spontaneous process as shown by the decrease in Gibbs free energy. The associated increase in entropy suggests that the TA-Hb binding is dominated by hydrophobic interactions.

Silica Replicas Derived from Mammalian Cells as an Innovative Approach to Physically Direct Cell Lineage Decisions of Mesenchymal Stem Cells.

By means of a "live-cell" template strategy, silica replicas displaying the same morphology and topography of the mammalian cells used as templates are fabricated. The replicas are used as substrates to direct the differentiation of mesenchymal stem cells (MSCs) to predefined cell lineages. Upregulation of specific genes shows how the silica replica-based substrates have the ability to induce the molecular characteristics of the mature cell types from which they have been derived from. Thus, MSCs cultured in the presence of silica replicas of human osteoblasts (HObs) differentiate into HObs-like cells, as shown by the upregulation of specific osteogenic genes. Likewise, when MSCs are incubated with silica replicas derived from human chondrocytes, an enhanced expression of chondrogenic markers is observed. Importantly, the effects of the silica replicas are cell type-specific since the incubation of MSCs with HObs silica replicas does not result in upregulation of chondrogenic markers and vice versa. What is more, for both cases, the differentiation rate is enhanced when the silica replicas are used in combination with growth factors, suggesting a potential synergistic effect. These results demonstrate the potential of this innovative method as an efficient and cheap approach with the potential to eliminate, or at least reduce, the use of biochemically soluble compounds in stem cells research.

Structural and functional alterations of polydopamine-coated hemoglobin: New insights for the development of successful oxygen carriers.

One of the major factors that is currently hindering the development of hemoglobin (Hb)-based oxygen carriers (HBOCs) is the autoxidation of Hb into nonfunctional methemoglobin. Modification with polydopamine (PDA), which is a biocompatible free radical scavenger has shown the ability to protect Hb against oxidation. Due to its tremendous potential in the development of successful HBOCs, herein, we conduct a thorough evaluation of the effect of PDA on the stability, aggregation, structure and function of the underlying Hb. By UV-vis spectrometry we show that PDA can prevent Hb's aggregation while thermal denaturation studies indicate that, although PDA coating resulted in a lower midpoint transition temperature, it was also able to protect the protein from full denaturation. These results are further corroborated by differential scanning calorimetry. Circular dichroism reveals that PDA can promote changes in Hb's secondary structure while, by UV-vis spectroscopy, we show that PDA also interacts with the porphyrin complex located in Hb's hydrophobic pocket. Last but not least, affinity studies show that PDA-coated Hb has a higher capability for oxygen release. Such an effect is further enhanced at lower pH. Importantly, through molecular docking simulations we provide a plausible explanation for the observed experimental results.

Novel scaffold platforms for simultaneous induction osteogenesis and angiogenesis in bone tissue engineering: a cutting-edge approach.

Despite the recent advances in the development of bone graft substitutes, treatment of critical size bone defects continues to be a significant challenge, especially in the elderly population. A current approach to overcome this challenge involves the creation of bone-mimicking scaffolds that can simultaneously promote osteogenesis and angiogenesis. In this context, incorporating multiple bioactive agents like growth factors, genes, and small molecules into these scaffolds has emerged as a promising strategy. To incorporate such agents, researchers have developed scaffolds incorporating nanoparticles, including nanoparticulate carriers, inorganic nanoparticles, and exosomes. Current paper provides a summary of the latest advancements in using various bioactive agents, drugs, and cells to synergistically promote osteogenesis and angiogenesis in bone-mimetic scaffolds. It also discusses scaffold design properties aimed at maximizing the synergistic effects of osteogenesis and angiogenesis, various innovative fabrication strategies, and ongoing clinical studies.

Hemoglobin-stabilized gold nanoclusters displaying oxygen transport ability, self-antioxidation, auto-fluorescence properties and long-term storage potential.

The development of hemoglobin (Hb)-based oxygen carriers (HBOCs) holds a lot of potential to overcome important drawbacks of donor blood such as a short shelf life or the potential risk of infection. However, a crucial limitation of current HBOCs is the autoxidation of Hb into methemoglobin (metHb), which lacks oxygen-carrying capacity. Herein, we address this challenge by fabricating a Hb and gold nanoclusters (AuNCs) composite (Hb@AuNCs) which preserves the exceptional features of both systems. Specifically, the Hb@AuNCs retain the oxygen-transporting properties of Hb, while the AuNCs provide antioxidant functionality as shown by their ability to catalytically deplete harmful reactive oxygen species (ROS). Importantly, these ROS-scavenging properties translate into antioxidant protection by minimizing the autoxidation of Hb into non-functional metHb. Furthermore, the AuNCs render Hb@AuNCs with auto-fluorescence properties which could potentially allow them to be monitored once administered into the body. Last but not least, these three features (i.e., oxygen transport, antioxidant and fluorescence properties) are well maintained following storage as a freeze-dried product. Thus, overall, the as-prepared Hb@AuNCs hold the potential to be used as a multifunctional blood surrogate in the near future.

Metal-organic framework-based oxygen carriers with antioxidant activity resulting from the incorporation of gold nanozymes.

Blood transfusions are a life-saving procedure since they can preserve the body's oxygen levels in patients suffering from acute trauma, undergoing surgery, receiving chemotherapy or affected by severe blood disorders. Due to the central role of hemoglobin (Hb) in oxygen transport, so-called Hb-based oxygen carriers (HBOCs) are currently being developed for situations where donor blood is not available. In this context, an important challenge that needs to be addressed is the oxidation of Hb into methemoglobin (metHb), which is unable to bind and release oxygen. While several research groups have considered the incorporation of antioxidant enzymes to create HBOCs with minimal metHb conversion, the use of biological enzymes has important limitations related to their high cost, potential immunogenicity or low stability in vivo. Thus, nanomaterials with enzyme-like properties (i.e., nanozymes (NZs)) have emerged as a promising alternative. Amongst the different NZs, gold (Au)-based metallic nanoparticles are widely used for biomedical applications due to their biocompatibility and multi-enzyme mimicking abilities. Thus, in this work, we incorporate Au-based NZs into a type of HBOC previously reported by our group (i.e., Hb-loaded metal-organic framework (MOF)-based nanocarriers (NCs)) and investigate their antioxidant properties. Specifically, we prepare MOF-NCs loaded with Au-based NZs and demonstrate their ability to catalytically deplete over multiple rounds of two prominent reactive oxygen species (ROS) that exacerbate Hb's autoxidation (i.e., hydrogen peroxide and the superoxide radical). Importantly, following loading with Hb, we show how these ROS-scavenging properties translate into a decrease in metHb content. All in all, these results highlight the potential of NZs to create novel HBOCs with antioxidant protection which may find applications as a blood substitute in the future.

Hemoglobin-based oxygen carriers camouflaged with membranes extracted from red blood cells: Optimization and assessment of functionality.

Despite being an indispensable clinical procedure, the transfusion of donor blood has important limitations including a short shelf-life, limited availability and specific storage requirements. Therefore, a lot of effort has been devoted to developing hemoglobin (Hb)-based oxygen carriers (HBOCs) that are able to replace or complement standard blood transfusions, especially in extreme life-threatening situations. Herein, we employed a Hb-loaded poly(lactide-co-glycolide) core which was subsequently coated with nanozymes to protect the encapsulated Hb from oxidation by reactive oxygen species. To render HBOCs with long circulation in the vasculature, which is a crucial requirement to achieve the high oxygen demands of our organism, the carrier was coated with a red blood cell-derived membrane. Three coating methods were explored and evaluated by their ability to repel the deposition of proteins and minimize their uptake by an endothelial cell line. Preservation of the oxygen carrying capacity of the membrane-coated carrier was demonstrated by an oxygen-binding and releasing assay and, the functionality resulting from the entrapped nanozymes, was shown by means of superoxide radical anion and hydrogen peroxide depletion assays. All in all, we have demonstrated the potential of the membrane-coated nanocarriers as novel oxygen carrying systems with both antioxidant and stealth properties.

Optimization of Hemoglobin Encapsulation within PLGA Nanoparticles and Their Investigation as Potential Oxygen Carriers.

Hemoglobin (Hb)-based oxygen carriers (HBOCs) display the excellent oxygen-carrying properties of red blood cells, while overcoming some of the limitations of donor blood. Various encapsulation platforms have been explored to prepare HBOCs which aim to avoid or minimize the adverse effects caused by the administration of free Hb. Herein, we entrapped Hb within a poly(lactide-co-glycolide) (PLGA) core, prepared by the double emulsion solvent evaporation method. We study the effect of the concentrations of Hb, PLGA, and emulsifier on the size, polydispersity (PDI), loading capacity (LC), and entrapment efficiency (EE) of the resulting Hb-loaded PLGA nanoparticles (HbNPs). Next, the ability of the HbNPs to reversibly bind and release oxygen was thoroughly evaluated. When needed, trehalose, a well-known protein stabilizer that has never been explored for the fabrication of HBOCs, was incorporated to preserve Hb's functionality. The optimized formulation had a size of 344 nm, a PDI of 0.172, a LC of 26.9%, and an EE of 40.7%. The HbNPs were imaged by microscopy and were further characterized by FTIR and CD spectroscopy to assess their chemical composition and structure. Finally, the ability of the encapsulated Hb to bind and release oxygen over several rounds was demonstrated, showing the preservation of its functionality.

Metal-organic framework-based oxygen carriers with antioxidant protection as a result of a polydopamine coating.

Rapid haemorrhage control to restore tissue oxygenation is essential in order to improve survival following traumatic injury. To this end, the current clinical standard relies on the timely administration of donor blood. However, limited availability and portability, special storage requirements, the need for blood type matching and risks of disease transmission result in severe logistical challenges, impeding the use of donor blood in pre-hospital scenarios. Therefore, great effort has been devoted to the development of haemoglobin (Hb)-based oxygen carriers (HBOCs), which could be used as a "bridge" to maintain tissue oxygenation until hospital admission. HBOCs hold the potential to diminish the deleterious effects of acute bleeding and associated mortality rates. We recently presented a novel HBOC, consisting of Hb-loaded metal organic framework (MOF)-based nanoparticles (NPs) (MOFHb-NPs), and demonstrated its ability to reversibly bind and release oxygen. However, a long standing challenge when developing HBOCs is that, over time, Hb oxidizes to non-functional methaemoglobin (metHb). Herein, we address this challenge by modifying the surface of the as-prepared MOFHb-NPs with an antioxidant polydopamine (PDA) coating. The conditions promoting the greatest PDA deposition are first optimized. Next, the ability of the resulting PDA-coated MOFHb-NPs to scavenge important reactive oxygen species is demonstrated both in a test tube and in the presence of two relevant cell lines (i.e., macrophages and endothelial cells). Importantly, this antioxidant protection translates into minimal metHb conversion.

Synthesis of Nanoparticles Fully Made of Hemoglobin with Antioxidant Properties: A Step toward the Creation of Successful Oxygen Carriers.

Transfusion of donor red blood cells (RBCs) is a crucial and widely employed clinical procedure. However, important constraints of blood transfusions include the limited availability of blood, the need for typing and cross-matching due to the RBC membrane antigens, the limited storage lifetime, or the risk for disease transmission. Hence, a lot of effort has been devoted to develop RBC substitutes, which are free from the limitations of donor blood. Despite the potential, the creation of hemoglobin (Hb)-based oxygen carriers is still facing important challenges. To allow for proper tissue oxygenation, it is essential to develop carriers with high Hb loading since Hb comprises about 96% of the RBCs' dry weight. In this work, nanoparticles (NPs) fully made of Hb are prepared by the desolvation precipitation method. Several parameters are screened (i.e., Hb concentration, desolvation ratio, time, and sonication intensity) to finally obtain Hb-NPs with a diameter of ∼568 nm and a polydispersity index (PDI) of 0.2. A polydopamine (PDA) coating is adsorbed to prevent the disintegration of the resulting Hb/PDA-NPs. Due to the antioxidant character of PDA, the Hb/PDA-NPs are able to deplete two harmful reactive oxygen species, namely, the superoxide radical anion and hydrogen peroxide. Such antioxidant protection also translates into minimizing the oxidation of the entrapped Hb to nonfunctional methemoglobin (metHb). This is a crucial aspect since metHb conversion also results in inflammatory reactions and dysregulated vascular tone. Finally, yet importantly, the reported Hb/PDA-NPs are also both hemo- and biocompatible and preserve the reversible oxygen-binding and releasing properties of Hb.

Stepping stones to the future of haemoglobin-based blood products: clinical, preclinical and innovative examples.

There is an enormous demand for blood transfusions in daily clinical practices since blood products, especially red blood cells (RBCs), can significantly improve survival. However, donor-derived RBCs have important limitations as a result of their insufficient availability, the need for typing and cross-matching, short shelf-life or risk of pathogenic contamination. Thus, as a result of the unique oxygen-transport ability of hemoglobin (Hb), Hb-based oxygen carriers (HBOCs) have attracted a lot of attention for the development of RBC surrogates able to provide tissue oxygenation. Here, we highlight the progress in the development of HBOCs, focusing on different examples that have undergone exhaustive pre-clinical and clinical evaluation. In addition, we also provide a comprehensive review of very recent and innovative examples to aid in the development of the next generation of blood substitutes.

Topography: A Biophysical Approach to Direct the Fate of Mesenchymal Stem Cells in Tissue Engineering Applications.

Tissue engineering is a promising strategy to treat tissue and organ loss or damage caused by injury or disease. During the past two decades, mesenchymal stem cells (MSCs) have attracted a tremendous amount of interest in tissue engineering due to their multipotency and self-renewal ability. MSCs are also the most multipotent stem cells in the human adult body. However, the application of MSCs in tissue engineering is relatively limited because it is difficult to guide their differentiation toward a specific cell lineage by using traditional biochemical factors. Besides biochemical factors, the differentiation of MSCs also influenced by biophysical cues. To this end, much effort has been devoted to directing the cell lineage decisions of MSCs through adjusting the biophysical properties of biomaterials. The surface topography of the biomaterial-based scaffold can modulate the proliferation and differentiation of MSCs. Presently, the development of micro- and nano-fabrication techniques has made it possible to control the surface topography of the scaffold precisely. In this review, we highlight and discuss how the main topographical features (i.e., roughness, patterns, and porosity) are an efficient approach to control the fate of MSCs and the application of topography in tissue engineering.

Hemoglobin-Based Oxygen Carriers Incorporating Nanozymes for the Depletion of Reactive Oxygen Species.

While transfusion of donor blood is a reasonably safe and well-established procedure, artificial oxygen carriers offer several advantages over blood transfusions. These benefits include compatibility with all blood types, thus avoiding the need for cross matching, availability, lack of infection, and long-term storage. Hemoglobin (Hb)-based oxygen carriers (HBOCs) are being explored as an "oxygen bridge" to replace or complement standard blood transfusions in extreme, life-threatening situations such as trauma in remote locations or austere battlefield or when blood is not an option due to compatibility issues or patient refusal due to religious objections. Herein, a novel HBOC was prepared using the layer-by-layer technique. A poly(lactide-co-glycolide) core was fabricated and subsequently decorated with Hb and nanozymes. The Hb was coated with poly(dopamine), and preservation of the protein structure and functionality was demonstrated. Next, cerium oxide nanoparticles were incorporated as nanozymes, and their ability to deplete reactive oxygen species (ROS) was shown. Finally, decorating the nanocarrier surface with poly(ethylene glycol) decreased protein adsorption and cell association/uptake. The as-prepared Hb-based oxygen nanocarriers were shown to be hemo- and bio-compatible. Their catalytic potential was furthermore demonstrated in terms of superoxide radical- and peroxide-scavenging abilities, which were retained over multiple cycles. Overall, these results demonstrate that the reported nanocarriers show potential as novel oxygen delivery systems with prolonged catalytic activity against ROS.

Immobilization of BMP-2 and VEGF within Multilayered Polydopamine-Coated Scaffolds and the Resulting Osteogenic and Angiogenic Synergy of Co-Cultured Human Mesenchymal Stem Cells and Human Endothelial Progenitor Cells.

We have previously reported the fabrication of a polycaprolactone and hydroxyapatite composite scaffold incorporating growth factors to be used for bone regeneration. Two growth factors were incorporated employing a multilayered coating based on polydopamine (PDA). In particular, Bone morphogenetic protein-2 (BMP-2) was bound onto the inner PDA layer while vascular endothelial growth factor (VEGF) was immobilized onto the outer one. Herein, the in vitro release of both growth factors is evaluated. A fastest VEGF delivery followed by a slow and more sustained release of BMP-2 was demonstrated, thus fitting the needs for bone tissue engineering applications. Due to the relevance of the crosstalk between bone-promoting and vessel-forming cells during bone healing, the functionalized scaffolds are further assessed on a co-culture setup of human mesenchymal stem cells and human endothelial progenitor cells. Osteogenic and angiogenic gene expression analysis indicates a synergistic effect between the growth factor-loaded scaffolds and the co-culture conditions. Taken together, these results indicate that the developed scaffolds hold great potential as an efficient platform for bone-tissue applications.

Multi-layered polydopamine coatings for the immobilization of growth factors onto highly-interconnected and bimodal PCL/HA-based scaffolds.

For bone tissue engineering applications, scaffolds that mimic the porous structure of the extracellular matrix are highly desirable. Herein, we employ a PCL/HA-based scaffold with a double-scaled architecture of small pores coupled to larger ones. To improve the osteoinductivity of the scaffold, we incorporate two different growth factors via polydopamine (PDA) coating. As a first step, we identify the maximum amount of PDA that can be deposited onto the scaffold. Next, to allow for the deposition of a second PDA layer which, in turn, will allow to increase the loading of growth factors, we incorporate a dithiol connecting layer. The thiol groups covalently react with the first PDA coating through Michael addition while also allowing for the incorporation of a second PDA layer. We load the first and second PDA layers with bone morphogenic protein-2 (BMP2) and vascular endothelial growth factor (VEGF), respectively, and evaluate the osteogenic potential of the functionalised scaffold by cell viability, alkaline phosphatase activity and the expression of three different osteogenesis-related genes of pre-seeded human mesenchymal stem cells. Through these studies, we demonstrate that the osteogenic activity of the scaffolds loaded with both BMP2 and VEGF is greater than scaffolds loaded only with BMP2. Importantly, the osteoinductivity is higher when the scaffolds are loaded with BMP2 and VEGF in two different PDA layers. Taken together, these results indicate that the as-prepared scaffolds could be a useful construct for bone-tissue applications.

Haemoglobin-loaded metal organic framework-based nanoparticles camouflaged with a red blood cell membrane as potential oxygen delivery systems.

Transfusion of donor red blood cells (RBCs) is a crucial methodology required for the treatment of acute trauma and anaemia or for surgical procedures. Due to the many limitations of donor blood, numerous strategies have been explored to develop haemoglobin (Hb)-based oxygen carriers to be used as oxygen delivery systems. However, since free Hb suffers from a lack of stability and short circulation times in blood, an encapsulation platform is needed. Herein, we entrap Hb within a type of metal organic framework (MOF)-based nanoparticle (MOF-NP). By doing so, Hb is protected from misfolding and denaturation, which is a crucial aspect to preserve its excellent oxygen binding and releasing properties. Furthermore, the porous structure of MOF-NPs allows for the diffusion of small molecules (i.e., oxygen) in and out of the system. Our results show that the Hb-loaded MOF-NPs (MOFHb-NPs) are monodisperse and show a small hydrodynamic diameter of ∼220 nm. Importantly, the structure and functionality of the encapsulated Hb are well preserved. To achieve long circulation in the bloodstream, we functionalized MOFHb-NPs with naturally derived RBC membranes and compared the stealth properties of the membrane-coated MOFHb-NPs with our previously reported PEGylation strategy. Protein adsorption and cell uptake studies demonstrate that both coatings are able to significantly decrease the adsorption of proteins and also diminish their uptake by macrophages and endothelial cells. Furthermore, both types of coatings endow MOFHb-NPs with good biocompatibility and oxygen binding and releasing properties. Overall, this study presents a novel oxygen carrier system which might find applications as a blood surrogate.

Low-Fouling Electrosprayed Hemoglobin Nanoparticles with Antioxidant Protection as Promising Oxygen Carriers.

Despite all the attempts to create advanced hemoglobin (Hb)-based oxygen carriers (HBOCs) employing an encapsulation platform, major challenges including attaining a high Hb loading and long circulation times still need to be overcome. Herein, the fabrication, for the first time, of nanoparticles fully made of Hb (Hb-NPs) employing the electrospray technique is reported. The Hb-NPs are then coated by antioxidant and self-polymerized poly(dopamine) (PDA) to minimize the conversion of Hb into nonfunctional methemoglobin (metHb). The PDA shell is further functionalized with poly(ethylene glycol) (PEG) to achieve stealth properties. The results demonstrate that the as-prepared Hb-NPs are hemo- and biocompatible while offering antioxidant protection and decreasing the formation of metHb. Additionally, decoration with PEG results in decreased protein adsorption onto the Hb-NPs surface, suggesting a prolonged retention time within the body. Finally, the Hb-NPs also preserve the reversible oxygen-binding and releasing properties of Hb. All in all, within this study, a novel HBOCs with high Hb content is fabricated and its potential as an artificial blood substitute is evaluated.

Therapeutic applications of multifunctional nanozymes.

Nanozymes, which are functional nanomaterials with enzyme-like characteristics, have emerged as a highly-stable and low-cost alternative to natural enzymes. Apart from overcoming the limitations of natural enzymes (e.g., high cost, low stability or complex production), nanozymes are also equipped with the unique intrinsic properties of nanomaterials such as magnetism, luminescence or near infrared absorbance. Therefore, the development of nanozymes exhibiting additional functions to their catalytic activity has opened up new opportunities and applications within the biomedical field. To highlight the progress in the field, this review summarizes the novel applications of multifunctional nanozymes in various biomedical-related fields ranging from cancer diagnosis, cancer and antibacterial therapy to regenerative medicine. Future challenges and perspectives that may advance nanozyme research are also discussed at the end of the review.