Clinical predictors of surgical intervention for gastrointestinal magnetic foreign bodies in children.

BACKGROUND/AIMS: To investigate the clinical situation, treatment methods, and clinical predictors of surgical intervention in children with magnetic foreign bodies in the digestive tract. MATERIALS AND METHODS: From January 2019 to June 2022, we retrospectively analyzed the clinical data of 72 children who ingested magnetic foreign bodies inadvertently in our hospital, including their general information, admissions, clinical manifestations, and treatment methods, as well as pertinent literature and statistical data. Following software processing, univariate and multivariate logistic regression analyses were conducted to determine the independent risk factors of this study. RESULTS: In this study, 16 patients (22.2%) were discharged smoothly following conservative treatment and 19 patients (26.4%) were cured by gastroscopy. The remaining 37 patients (51.4%) were underwent surgery, in which 26 cases developed gastrointestinal perforation. There were statistical differences between surgery group and non- surgery group in the days of eating by mistake, clinical manifestations (nausea and vomiting, intermittent abdominal pain, abdominal muscle tension) and movement trajectory by every 24-h radiograph (P < 0.01). Logistic regression analysis showed that intermittent abdominal pain and abdominal muscle tension were independent risk factors for surgical treatment. CONCLUSION: Magnetic foreign bodies seriously endanger children's health. This study offers a single-center basis for the choice of surgical opportunity for intestinal obstruction or perforation caused by magnetic foreign bodies. Clinicians need immediate surgical intervention if the child shows symptoms of abdominal pain or abdominal tension.

Constructing Built-in Electric Field in Heterogeneous Nanowire Arrays for Efficient Overall Water Electrolysis.

Efficient bifunctional electrocatalysts for hydrogen and oxygen evolution reactions are key to water electrolysis. Herein, we report a built-in electric field (BEF) strategy to fabricate heterogeneous nickel phosphide-cobalt nanowire arrays grown on carbon fiber paper (Ni2 P-CoCH/CFP) with large work function difference (ΔΦ) as bifunctional electrocatalysts for overall water splitting. Impressively, Ni2 P-CoCH/CFP exhibits a remarkable catalytic activity for hydrogen and oxygen evolution reactions to obtain 10 mA cm-2 , respectively. Moreover, the assembled lab-scale electrolyzer driven by an AAA battery delivers excellent stability after 50 h electrocatalysis with a 100 % faradic efficiency. Computational calculations combining with experiments reveal the interface-induced electric field effect facilitates asymmetrical charge distributions, thereby regulating the adsorption/desorption of the intermediates during reactions. This work offers an avenue to rationally design high-performance heterogeneous electrocatalysts.

Coordination Polymer-Mediated Molecular Surgery for Precise Interconversion of Dicyclobutane Compounds.

A Cd(II)-based coordination polymer {[Cd2(5-F-1,3-bpeb)2(FBA)4]·H2O}n (CP1) was obtained from Cd(II) salt, 5-fluoro-1,3-bis[2-(4-pyridyl)ethenyl]benzene (5-F-1,3-bpeb), and p-fluorobenzoic acid (HFBA). Within the one-dimensional chain structure of CP1, a pair of 5-F-1,3-bpeb was arranged in a face-to-face style. Upon UV irradiation and heat treatment, multiple cyclobutane isomers, including specific monocyclobutanes (1 with an endo-cyclobutane ring in CP1-1 and 1' with an exo-cyclobutane ring in CP1-1') and dicyclobutanes (endo,endo-dicyclobutane 2α in CP1-2α, exo,endo-dicyclobutane 2ß in CP1-2ß, and exo,exo-dicyclobutane 2γ in CP1-2γ) were stereoselectively produced. These isomers could be interconverted inside the CP via cutting/coupling specific bonds, which may be regarded as a type of molecular surgery. The precision of cutting/coupling relied on the thermal stability of the cyclobutanes and the alignment of the reactive alkene centers. The conversion processes were tracked through nuclear magnetic resonance, in situ powder X-ray diffraction, and IR spectroscopy. This approach can be considered as skeletal editing to construct complex organic compounds directly from one precursor.

Facile Strategy for Preparing a Rosin-Based Low-k Material: Molecular Design of Free Volume.

Low-k dielectrics are urgently needed in modern integrated circuits. The introduction of free volume instead of porous structures has become a powerful strategy to reduce the k value. According to this strategy, the biomass resource rosin-containing hydrogenated phenanthrene ring was introduced into benzocyclobutene (BCB) resin to reduce the k value; then a rosin-based BCB monomer was successfully synthesized. Meanwhile, the BCB monomer without a rosin skeleton was prepared. After converting the monomers into thermo-crosslinked materials, notably that the rosin skeleton has a great influence on the free volume and k value of the material. The fractional free volume and k value of the former are 26% and 2.44, respectively, and those of the latter are 14% and 2.84, respectively. In addition, the distances between molecular chains and the density of the former are 0.60 nm and 1.06 g cm-3, respectively; those of the latter are 0.56 nm and 1.28 g cm-3, respectively. These data show that introducing hydrogenated phenanthrene rings occupies part of the space and hinders the packing of molecular chains, which increases the distance between molecular chains and reduces the density of the polymer, resulting in an increasing free volume and a reducing k value. Notably that introducing hydrogenated phenanthrene rings cannot affect other properties of the material. Therefore, this research indicates that introducing rosin skeletons can prepare high-performance materials, which provide some promising low-k materials for the development of electronics and microelectronics.

Controllable multiple-step configuration transformations in a thermal/photoinduced reaction.

Solid-state photochemical reactions of olefinic compounds have been demonstrated to represent powerful access to organic cyclic molecules with specific configurations. However, the precise control of the stereochemistry in these reactions remains challenging owing to complex and fleeting configuration transformations. Herein, we report a unique approach to control the regiospecific configurations of C = C groups and the intermediates by varying temperatures in multiple-step thermal/photoinduced reactions, thus successfully realizing reversible ring closing/opening changes using a single-crystal coordination polymer platform. All stereochemical transitions are observed by in situ single-crystal X-ray diffraction, powder X-ray diffraction and infrared spectroscopy. Density functional theory calculations allow us to rationalize the mechanism of the synergistic thermal/photoinduced transformations. This approach can be generalized to the analysis of the possible configuration transformations of functional groups and intermediates and unravel the detailed mechanism for any inorganic, organic and macromolecular reactions susceptible to incorporation into single-crystal coordination polymer platforms.

Tunable photosalient behaviours within coordination polymers via functional molecular prearrangements.

Four Cd(II)/diene coordination polymers (CPs) with similar 1D chain motifs exhibit different photosalient (PS) behaviours in response to UV light. The [2+2] photoreaction between the CC groups within these CPs results in diverse PS behaviours of their crystals with different CC pair arrangements. The interesting PS behaviours of these CPs can be applied in design and fabrication of advanced photoactuating materials.

New structurally diverse photoactive cadmium coordination polymers.

Four structurally diverse coordination polymers 1-4 (CP1-CP4) were designed and constructed from Cd(II) ions and various carboxyl ligands (H2oba, 4,4'-oxydibenzoic acid; H2bpa, (E)-4,4'-(ethene-1,2-diyl)dibenzoic acid; H2pbda, 4,4'-((1,3-phenylenebis(methylene))bis(oxy))dibenzoic acid) and the alkene containing ligand (CH3-bpeb, 4,4'-((1E,1'E)-(2,5-dimethyl-1,4-phenylene)bis(ethene-2,1-diyl))dipyridine). CP1-CP4 possess Cd2 binuclear secondary building units (SBUs). The geometry of the dicarboxylate ligands and the reaction conditions determined the final structure with a variety of motifs. CP1 possesses an interdigitated 2D structure, while CP2 consists of a 1D channel-like motif with isolated CH3-bpeb molecules embedded in the channels. The solid-state structure of CP3 consists of two unique layers interpenetrated to form a 2D + 2D → 2D polycatenated backbone, while a 1D channel-like motif filled by isolated CH3-bpeb molecules was observed for CP4. In all four coordination polymers pairs of CH3-bpeb molecules were bound or encapsulated by the Cd2 secondary building units at an appropriate distance and orientation for solid-state [2 + 2] photodimerization of one pair of CC bonds. Desolvation of CP3 with heat resulted in a decrease in solid-state fluorescence and a slowing of the rate of solid-state photodimerization.

Tuning the configuration of the flexible metal-alkene-framework affords pure cycloisomers in solid state photodimerization.

The photochemical [2+2] cycloaddition of 3,5-bis-(2-(pyridin-4-yl)vinyl)pyridine (bpvp) in the flexible Cd-based metal-alkene frameworks produced different isomeric photoproducts depending on the auxiliary and guest molecules. The bulkiness of the guest molecules influenced the conformation of the ligand, and thus the outcome of the cycloaddition reaction.

CircRNA-ACAP2 contributes to the invasion, migration, and anti-apoptosis of neuroblastoma cells through targeting the miRNA-143-3p-hexokinase 2 axis.

BACKGROUND: Circulating RNAs (Circ-RNAs) are tightly related to the processes of neuroblastoma. The circ-ACAP2 has been reported as dysregulated in various cancers; however, its biological roles and mechanisms in neuroblastoma remain largely unclear. METHODS: We collected 40 neuroblastoma tissues and adjacent noncancerous tissues. Quantitative reverse transcription polymerase chain reaction (qRT-RCR) or western blot were used to examine ACAP2, miR-143-3p, and HK2 abundances. Cell migration, invasion, glycolysis, and apoptosis were assessed via wound healing, transwell, glucose uptake and lactate, 3-(4,5-diamethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay, and flow cytometry. The association between circRNA, microRNA (miRNA), and messenger RNA (mRNA) was examined by dual-luciferase reporter analysis and RNA immunoprecipitation. RESULTS: The abundances of ACAP2 and HK2 were remarkedly increased in neuroblastoma tissues and cell lines. Silencing ACAP2 significantly constrained neuroblastoma cell migration, invasion, and glycolysis, and promoted apoptosis. Bioinformatics prediction, luciferase assay, and RNA pull-down assay consistently demonstrated that ACAP2 sponged miR-143-3p to downregulate its expression in neuroblastoma cells. Furthermore, we identified that hexokinase 2, a glycolysis key enzyme, was a direct target of miR-143-3p in neuroblastoma cells. Rescue of miR-143-3p in ACAP2-overexpressing cells effectively mitigated the influence of ACAP2 on neuroblastoma cell processes. CONCLUSIONS: Our study revealed biological roles and molecular mechanisms for circ-ACAP2 in the oncogenic characteristics of neuroblastoma, facilitating the development of circRNA-based treatment approaches for anti-brain tumor therapy.

Modulating the regioselectivity of solid-state photodimerization in coordination polymer crystals.

Coordination polymers [Cd(1,4-bpeb)(L1)] (1), [Zn2(1,4-bpeb)2(L2)2(SO42-)2] (2) and [Cd(1,4-bpeb)(L3)] (H2O) (3) (H2L1, 3-[2-(3-hydroxy-phenoxymethyl)-benzyloxy]-benzoic acid; HL2, 1H-Indazole-3-carboxylic acid; H3L3, benzene-1,2,3-tricarboxylic acid; 1,4-bpeb, 1,4-bis[2-(4-pyridyl)vinyl]benzene have been synthesized under solvothermal conditions. Complexes 1-3 underwent photodimerization in the solid-state to give quantitative yields of single isomeric products. The choice of carboxyl ligands L and metal center determined the arrangement of 1,4-bpeb ligands, which in turn directed the regiochemistry of the final photoproducts. The solid-state network structures of cadmium based 1 and 3 had 1,4-bpeb pairs aligned face-to-face with both C[double bond, length as m-dash]C centres in each ligand at an appropriate distance and alignment for photodimerization to give the corresponding para-[2.2]cyclophane (pCP) exclusively. By contrast, compound 2 possessed dinuclear (ZnSO4)2 metallocycles that positioned the 1,4-bpeb "arms" face-to-face, but with C[double bond, length as m-dash]C centres offset at an appropriate distance for only one pair to undergo [2 + 2] cycloaddition to yield a single stereoisomer of the monocyclobutane photo-product bpbpvpcb. This work highlights crystal engineering design principles that can be used to facilitate regio- and stereospecificity in solid-state transformations.

Amino group decorated coordination polymers for enhanced detection of folic acid.

A series of fluorescent coordination polymers (CPs) {[Cd2(CH3-bpeb)2(BDC)2] CP1, (BDC)0.5/(NH2-BDC)0.5-CP1, (BDC)0.34/(NH2-BDC)0.66-CP1, (BDC)0.25/(NH2-BDC)0.75-CP1, (BDC)0.2/(NH2-BDC)0.8-CP1, (NH2-BDC)-CP1} were prepared from conjugated ligand 4,4'-((2-methyl-1,4-phenylene)bis(ethene-2,1-diyl))bipyridine (CH3-bpeb), terephthalic acid (BDC), aminoterephthalic acid (NH2-BDC) and CdSO4 under solvothermal conditions. The fluorescence of aqueous suspensions of these CPs was quenched by folic acid (FA) in a concentration dependent manner. The efficiency of quenching increasing with an increased proportion of NH2-BDC ligand in the CP with (NH2-BDC)-CP1 exhibiting a low detection limit of 1.7 × 10-7 M.

Coordination-Driven Stereospecific Control Strategy for Pure Cycloisomers in Solid-State Diene Photocycloaddition.

To obtain a pure product without the isomer byproducts is a goal that many chemists are pursuing. As one kind of very important synthesis method, the photochemical reaction is simple and straightforward yet low-selective. In this work, a coordination interaction-based oriented synthesis strategy has been proposed to realize the precise stereochemical control of the isomeric cyclic compounds in the photocycloaddition reaction. Through fixing the reactants via coordination interactions, the arrangements and configurations of the reactants can be adjusted, thereby successfully producing all of the related photocycloaddition products without isomer byproducts for the first time. This work not only provides a new route to synthesize the pure cyclic compounds but also expands the application of the photocycloaddition reaction.

Dual-response detection of Ni2+ and Cu2+ ions by a pyrazolopyrimidine-based fluorescent sensor and the application of this sensor in bioimaging.

Herein, a dual-response fluorescent sensor, L, based on pyrazolopyrimidine was designed and developed for the simultaneous detection of Ni2+ and Cu2+ ions in the presence of other metal ions; the structural characterization of L was carried out by FTIR spectroscopy, NMR spectroscopy, HRMS and X-ray diffraction analysis. The sensor L effectively displayed fluorescence quenching towards the Ni2+ and Cu2+ ions with high sensitivity without interference from other metal ions. The results reveal that L binds to Ni2+ and Cu2+ in a 2 : 1 pattern, which matches well with the result of the Job's plot. The association constants of L with Ni2+ and Cu2+ were 3.2 × 104 M-1 and 7.57 × 104 M-1, respectively. The detection limits (DLs) are down to 8.9 nM for Ni2+ and 8.7 nM for Cu2+. The fluorescence imaging of L in T-24 cells was investigated because of the low cytotoxicity of L, indicating that L could be used to detect Ni2+ and Cu2+ in living cells.

A pyrazolopyrimidine based fluorescent probe for the detection of Cu2+ and Ni2+ and its application in living cells.

A fluorescent sensor L based on a pyrazolopyrimidine core simultaneously detects Cu2+ and Ni2+ ions by photoluminescence quenching, even in the presence of other metal cations. Sensor L possesses high association constants of 5.24 × 103 M-1 and 2.85 × 104 M-1 and low detection limits of 0.043 µM and 0.038 µM for Cu2+ and Ni2+, respectively. The binding stoichiometry ratios of L to Cu2+ or Ni2+ is 1:1 as determined by Benesi-Hildebrand and Job's plots, and by crystal structures. DFT calculations on L-Cu2+ indicated reduced electron donation from the coordinated pyrazolopyridine to the fused pyrimidine and pendant phenyl group which, together with a smaller HOMO-LUMO orbital gap could favour non-radiative decay and explain the observed fluorescence quenching. Sensor L possessed low cytotoxicity and good imaging characteristics for Cu2+ and Ni2+ in living cells, suggesting potential applications for detecting Cu2+ and Ni2+in vivo.

Platinum(ii) complexes with rutaecarpine and tryptanthrin derivatives induce apoptosis by inhibiting telomerase activity and disrupting mitochondrial function.

Four new platinum(ii) complexes, [Pt(Rut)(DMSO)Cl2] (Rut-Pt), [Pt(Try)(DMSO)Cl2] (Try-Pt), [Pt(ITry)(DMSO)Cl2] (ITry-Pt) and [Pt(BrTry)(DMSO)Cl2] (BrTry-Pt), with rutaecarpine (Rut), tryptanthrin (Try), 8-iodine-tryptanthrin (ITry) and 8-bromo-tryptanthrin (BrTry) as ligands were synthesized and fully characterized. In these complexes, the platinum(ii) adopts a four-coordinated square planar geometry. The inhibitory activity evaluated by the MTT assay showed that BrTry-Pt (IC50 = of 0.21 ± 0.25 µM) could inhibit the growth of T-24 tumor cells (human bladder cancer cell line) more so than the other three complexes. In addition, all of these Pt complexes exhibited low toxicity against non-cancerous HL-7702 cells. BrTry-Pt induced cell cycle arrest in the S phase, leading to the down-regulation of cyclin A and CDK2 proteins. BrTry-Pt acts as a telomerase inhibitor targeting the c-myc promoter. In addition, BrTry-Pt also caused mitochondrial dysfunction. Importantly, the in vitro anticancer activity of BrTry-Pt was higher than those of Rut-Pt, Try-Pt and ITry-Pt, and it was more selective for T-24 cells than for non-cancerous HL-7702 cells.

Stereoselective Solid-State Synthesis of Substituted Cyclobutanes Assisted by Pseudorotaxane-like MOFs.

Regioselective photodimerization of trans-4-styrylpyridine (4-spy) derivatives is performed using pseudorotaxane-like Zn-based metal organic frameworks MOFs as templates. The formation of rctt-HT (head-to-tail) dimers is achieved by confining pairs of coordinated 4-spy derivative ligands within hexagonal windows and then irradiating them with UV light. It is also possible to achieve a photodimerization reaction where two different substituted 4-spy ligands are included in such a MOF material. The ether bond formation is employed to protect the sensitive -OH group of HO-spy and the methyl group of CH3 O-spy is subsequently removed after the formation of cyclobutane derivative in the CH3 O-spy-based MOF. Introducing substituents at the 2- or 3-position of the phenyl group of 4-spy does not significantly affect the rate of the dimerization process except in the case of the strongly electron-withdrawing nitro group where the rate is significantly decreased. These results are in striking contrast to the mixtures of photoproducts and low yields obtained by untemplated photodimerization in organic solvents.

Controlled formation of chiral networks and their reversible chiroptical switching behaviour by UV/microwave irradiation.

A 3D coordination polymer {[Cd(L(1))(L(2))]2}n (1) spontaneously resolves into enantiomorphic crystals of 1P and 1M without any chiral source. Bulk quantities of 1P and 1M can be predictably and reliably obtained by using chiral cyclohexane-1,2-diamine. 1 can be transformed into {[Cd(L(1))(L(3))0.5]2}n (2) by highly selective [2+2] photodimerization of L(2) ligands. The reverse process can be achieved by microwave irradiation. The cycloreversion/cycloaddition cycles result in chiroptical switching behavior.

A Zn(II) coordination polymer and its photocycloaddition product: syntheses, structures, selective luminescence sensing of iron(III) ions and selective absorption of dyes.

One coordination polymer [Zn2(L)2(bpe)2(H2O)2] (1) (L = 4,4'-((1,2-phenylenebis(methylene))bis(oxy))dibenzoic acid; bpe = (E)-1,2-di(pyridin-4-yl)ethene) was prepared and structurally determined. Compound 1 has a chain structure in which its pair of bpe ligands is arranged in a head-to-tail manner with their C=C bonds being close enough for a [2 + 2] cycloaddition reaction. Upon exposure to UV light, compound 1 undergoes a single-crystal-to-single-crystal (SCSC) [2 + 2] photodimerization to generate one 2D coordination polymer [Zn(L)(rctt-tpcb)0.5(H2O)] (1a) (rctt (regio cis, trans, trans)-tpcb = tetrakis(4-pyridyl)cyclobutane). The tpcb ligands in the crystals of 1a show an intriguing in situ thermal isomerisation. The nanospheres of 1 can be obtained by recrystallization in DMSO/alcohol. The nanospheres of 1a can also be readily produced from the corresponding nanospheres of 1 by the photocyclodimerization method. Compared with those of 1a, the nanospheres of 1 display highly selective sensing of Fe(3+) ions over mixed metal ions through fluorescence quenching. Moreover, the nanospheres of 1a can rapidly adsorb CR (congo red), MB (methylene blue) or RhB (rhodamine B) over MO (methyl orange) from aqueous solutions. This work offers a new photoinduced post-synthetic method for the synthesis of multifunctional MOFs, which show luminescence sensing of Fe(3+) ions and dye adsorption properties.

In-situ X-ray diffraction snapshotting: determination of the kinetics of a photodimerization within a single crystal.

In a single-crystal-to-single-crystal (SCSC) transformation, a preformed three-dimensional coordination polymer,[Ni3(oba)2(bpe)2(SO4)(H2O)4]· H2O (H2oba = 4,4'-oxydibenzoic acid; bpe = (E)-1,2-di(pyridin-4-yl)ethane) (1), was shown to undergo a [2+2] cycloaddition reaction upon exposure to UV irradiation. The kinetics of this reaction were followed by taking "snapshots" of the solid state transformation using in situ single crystal X-ray crystallography; a first order process was indicated. The reaction rate was influenced by many factors such as the separation of the sample from the UV light source, the heat produced by the UV irradiation, the light flux of the UV lamp used, the size of the single-crystal and the powder samples. The investigation of the kinetics was complemented by (1)H NMR studies. The results clearly demonstrate that in situ single-crystal X-ray diffraction is able to provide useful insights into the gradual formation of the photoproducts and the reaction processes. The work also offers a clear indication that it is possible to use the technique to study the kinetics of other photocycloaddition reactions and SCSC processes in general.

Six [Tp*WS3Cu2]-based clusters derived from [Et4N][Tp*WS3], Cu(I) salts and phosphine ligands: syntheses, structures and enhanced third-order NLO properties.

Treatment of [Et4N][Tp*WS3] (Tp* = hydridotris(3,5-dimethylpyrazol-1-yl)borate) (1) with CuX (X = Br, SCN) and PPh3 or 1,1-bis(diphenylphosphino)methane (dppm) produced two neutral trinuclear clusters [Tp*W(µ3-S)(µ-S)2Cu2Br(PPh3)] (2) and [Tp*W(µ3-S)(µ-S)2Cu2(SCN)(dppm)]2·MeCN·Et2O (3·MeCN·Et2O). Reactions of 1 with [Cu(MeCN)4]PF6, NH4PF6 and 1,3-bis(diphenylphosphino)propane (dppp), N,N-bi(diphenylphosphanylmethyl)-2-aminopyridine (bdppmapy), N,N,N',N'-tetra(diphenylphosphanylmethyl)ethylenediamine (dppeda), or 1,4-N,N,N',N'-tetra(diphenylphosphanylmethyl)benzenediamine (dpppda) afforded four clusters containing butterfly-shaped [Tp*WS3Cu2] cores, [Tp*W(µ3-S)(µ-S)2Cu2(dpppds)](PF6)·1.25MeCN (dpppds = 1,3-bis(diphenylphosphino)propane disulfide) (4·1.25MeCN), [Tp*W(µ3-S)(µ-S)2Cu2(bdppmapy)](PF6)·3MeCN (5·3MeCN) and {[Tp*W(µ3-S)(µ-S)2Cu2]2(L)]}(PF6)2·Sol (6·Et2O: L = dppeda, Sol = Et2O; 7·1.25MeCN: L = dpppda, Sol = 1.25MeCN). Compounds 2-7 were characterized by elemental analysis, IR, UV-Vis, (1)H and (31)P{(1)H} NMR spectra, electrospray ion mass spectra (ESI-MS) and single-crystal X-ray diffraction. Compound 2 or 3 has a butterfly-shaped [Tp*WS3Cu2] core in which one [Tp*WS3] unit binds two Cu(I) centers via one µ3-S and two µ-S atoms. In the cationic structure of 4 or 5, one in situ-formed dpppds or bdppmapy combines with the [Tp*WS3Cu2] core via each of its two S atoms or two P atoms coordinated at each Cu(I) center. In the bicationic structure of 6 or 7, two [Tp*WS3Cu2] cores are linked by one dppeda or dpppda bridge to form a bicyclic structure. The isolation of 2-7 with unstable [Tp*WS3Cu2] cores may be ascribed to the coordination of P- or S-donor ligands at Cu(i) centers of these cores. The third-order nonlinear optical (NLO) properties of 2-7 in DMF were also investigated by using the femtosecond degenerate four-wave mixing (DFWM) technique at 800 nm.