RESUMO
Detecting short-wavelength infrared (SWIR) light has underpinned several emerging technologies. However, the development of highly sensitive organic photodetectors (OPDs) operating in the SWIR region is hindered by their poor external quantum efficiencies (EQEs) and high dark currents. Herein, the development of high-sensitivity SWIR-OPDs with an efficient photoelectric response extending up to 1.3 µm is reported. These OPDs utilize a new ultralow-bandgap molecular semiconductor featuring a quinoidal tricyclic electron-deficient central unit and multiple non-covalent conformation locks. The SWIR-OPD achieves an unprecedented EQE of 26% under zero bias and an even more impressive EQE of up to 41% under a -4 V bias at 1.10 µm, effectively pushing the detection limit of silicon photodetectors. Additionally, the low energetic disorder and trap density in the active layer lead to significant suppression of thermal-generation carriers and dark current, resulting in excellent detectivity (Dsh *) exceeding 1013 Jones from 0.50 to 1.21 µm and surpassing 1012 Jones even at 1.30 µm under zero bias, marking the highest achievements for OPDs beyond the silicon limit to date. Validation with photoplethysmography measurements, a spectrometer prototype in the 0.35-1.25 µm range, and image capture under 1.20 µm irradiation demonstrate the extensive applications of this SWIR-OPD.
RESUMO
High-sensitivity organic photodetectors (OPDs) with strong near-infrared (NIR) photoresponse have attracted enormous attention due to potential applications in emerging technologies. However, few organic semiconductors have been reported with photoelectric response beyond ~1.1 µm, the detection limit of silicon detectors. Here, we extend the absorption of organic small-molecule semiconductors to below silicon bandgap, and even to 0.77 eV, through introducing the newly designed quinoid-terminals with high Mulliken-electronegativity (5.62 eV). The fabricated photodiode-type NIR OPDs exhibit detectivity (D*) over 1012 Jones in 0.41 to 1.2 µm under zero bias with a maximum of 2.9 × 1012 Jones at 1.02 µm, which is the highest D* for reported OPDs in photovoltaic-mode with response spectra beyond 1.1 µm. The high D* in 0.9 to 1.2 µm is comparable to those of commercial InGaAs photodetectors, despite the detection limit of our OPDs is shorter than InGaAs (~1.7 µm). A spectrometer prototype with a wide measurable region (0.4 to 1.25 µm) and NIR imaging under 1.2-µm illumination are demonstrated successfully in OPDs.
RESUMO
Low-bandgap tin (Sn)-lead (Pb) halide perovskites can achieve near-infrared response for photodetectors. However, the Sn-based devices suffer from notorious instability and high defect densities due to the oxidation propensity of Sn2+ . Herein, a multifunctional additive 4-amino-2,3,5,6-tetrafluorobenzoic acid (ATFBA) is presented, which can passivate surface defects and inhibit the oxidation of Sn2+ through hydrogen bonds and chelation coordination from the terminal amino and carboxyl groups. The perfluorinated benzene ring structure of ATFBA affords the passivator assembled at the grain boundaries to enhance the water resistance. With the synergistical passivation of these functional groups, the Sn-Pb perovskite photodetector exhibits a remarkable responsivity of 0.52 A W-1 and an excellent specific detectivity of 5.34 × 1012 Jones at 850 nm, along with remaining 97% of its initial responsivity over 450 days. Benefitting from high sensitivity, the photodetector is integrated into a pulse oximetry sensor visualization system, yielding accurate blood oxygen saturation and heart rate with less than 2% error. This work paves the avenue toward constructing high-performance and stable Sn-Pb perovskite photodetectors for practical applications.