Ultra-Low Alginate-Based Multifunctional Composite Binders for Enhanced Mechanical, Electrochemical, and Thermal Performance of Li-S Batteries.

The practical application of Li-S batteries, which hold great potential as energy storage devices, is impeded by various challenges, such as capacity degradation caused volume change, polysulfide shuttling, poor electrode kinetics, and safety concerns. Binder plays a crucial role in suppressing volume change of cathode side, thereby enhancing the electrochemical performance of Li-S batteries. In this research, a novel network binder (SA-Co-PEDOT) composed of sodium alginate is presented, Co2+ ions as cross-linking agent and PEDOT as an electronic conductor. The theoretical analysis and experimental testing confirm that the SA-Co-PEDOT binder with synergistic combination of catalytic center and electron transfer network effectively mitigates large volumetric changes during cycling while simultaneously enhancing electrode kinetics through controlling the deposition morphology of sulfur end product and its nucleation and dissolution. As a result, it achieves a capacity of 844 mAh g-1 after 150 cycles at 0.2 C. Moreover, the electrode with SA-Co-PEDOT binder subjected a bending test maintains a capacity of 395 mAh g-1 after 500 cycles at 0.5 C, exhibiting an impressively low decay rate of only 0.11%. Even with an ultra-low content of 2 wt.% SA-Co-PEDOT binder, the electrode still maintains a capacity of 999.7 mAh g-1 after 100 cycles at 0.5 C.

Studies on Composite Solid Electrolytes with a Dual Selective Confinement Interface Structure of Anions for High-Performance Lithium Metal Batteries.

Solid-state lithium batteries (SSLBs) have attracted much attention due to their good thermal stability and high energy density. However, solid-state electrolytes with low conductivity and prominent interfacial issues have hindered the further development of SSLBs. In this research, inspired from a selective confinement structure of anions, a novel HMOF-DNSE composite solid electrolyte with a dual selective confinement interface structure is proposed based on the semi-interpenetrating structure generated by poly(vinylidene fluoride)-hexafluoropropylene (PVDF-HFP), poly(di-n-butylmethylammonium) bis(trifluoromethanesulfonyl)imide (PDADMATFSI), and a metal-organic frameworks MOF derivative (HMOF) as a filler. The dual-network structure of PVDF-HFP/PDADMATFSI combined with HMOF formed a dual selective confinement interface structure to confine out the movement of large anions TFSI-, thereby enhancing the transfer ability of Li+. Subsequently, the addition of HMOF further improves the transfer of Li+ by binding up TFSI- through its crystal structure. The results show that HMOF-DNSE possesses a high room-temperature ionic conductivity (0.7 mS cm-1), a wide electrochemical window (up to 4.5 V), and a high Li+ transfer number (tLi+) (0.56). LiFePO4/HMOF-DNSE/Li cell shows an excellent capacity of 141.5 mAh g-1 at 1C rate under room temperature, with a high retention of 80.1% after 500 cycles. The material design strategy, which is based on selective confinement interface structures of anions, offers valuable insights into enhancing the electrochemical performance of solid-state lithium batteries.

Micro Area Interface Wetting Structure with Tailored Li+-Solvation and Fast Transport Properties in Composite Polymer Electrolytes for Enhanced Performance in Solid-State Lithium Batteries.

To satisfy the demand for high safety and energy density in energy storage devices, all-solid-state lithium metal batteries with solid polymer electrolytes (SPE) replacing traditional liquid electrolytes and separators have been proposed and are increasingly regarded as one of the most promising candidates as next-generation energy storage systems. In this study, poly(vinylidene fluoride)-hexafluoropropylene/lignosulfonic acid (PVDF-HFP/LSA) composite polymer electrolyte (CPE) membranes with a micro area interface wetting structure were successfully prepared by incorporating LSA into the PVDF-HFP polymer matrix. The enhanced interaction between the polar functional group in LSA and the C═O in N-methylpyrrolidone (NMP) hinders the evaporation of solvent NMP, thus creating a micro area wetting structure, which offers a flexible region for the chain segment movement and enlarging the area of the amorphous zone in PVDF-HFP. From the results of IR and Raman spectroscopy, it was found that the presence of LSA induced unique ion transport channels created by the massive aggregated ion pair (AGG) and contact ion pair (CIP) of ion cluster structures composed of Li+ and multiple TFSI- and, at the same time, effectively reduced the crystallinity of the polymer electrolyte, hence further contributing to the Li+ diffusion. As a result, at a rate of 2 C, the Li|CPE-15|LiFePO4 solid-state battery delivers an initial discharge-specific capacity of 134.9 mAh g-1 and maintains stability with a retention of 84% during 400 charge-discharge cycles while the Li|CPE-0|LiFePO4 battery fails after only a few cycles at the same rate.

Cross-Scale Synthesis of Organic High-k Semiconductors Based on Spiro-Gridized Nanopolymers.

High dielectric constants in organic semiconductors have been identified as a central challenge for the improvement in not only piezoelectric, pyroelectric, and ferroelectric effects but also photoelectric conversion efficiency in OPVs, carrier mobility in OFETs, and charge density in charge-trapping memories. Herein, we report an ultralong persistence length (l p ≈ 41 nm) effect of spiro-fused organic nanopolymers on dielectric properties, together with excitonic and charge carrier behaviors. The state-of-the-art nanopolymers, namely, nanopolyspirogrids (NPSGs), are synthesized via the simple cross-scale Friedel-Crafts polygridization of A2B2-type nanomonomers. The high dielectric constant (k = 8.43) of NPSG is firstly achieved by locking spiro-polygridization effect that results in the enhancement of dipole polarization. When doping into a polystyrene-based dielectric layer, such a high-k feature of NPSG increases the field-effect carrier mobility from 0.20 to 0.90 cm2 V-1 s-1 in pentacene OFET devices. Meanwhile, amorphous NPSG film exhibits an ultralow energy disorder (<50 meV) for an excellent zero-field hole mobility of 3.94 × 10-3 cm2 V-1 s-1, surpassing most of the amorphous π-conjugated polymers. Organic nanopolymers with high dielectric constants open a new way to break through the bottleneck of efficiency and multifunctionality in the blueprint of the fourth-generation semiconductors.

IPN hydrogel nanocomposites based on agarose and ZnO with antifouling and bactericidal properties.

Nanocomposite hydrogels with interpenetrating polymer network (IPN) structure based on poly(ethylene glycol) methyl ether methacrylate modified ZnO (ZnO-PEGMA) and 4-azidobenzoic agarose (AG-N3) were prepared by a one-pot strategy under UV irradiation. The hydrogels exhibited a highly macroporous spongelike structure, and the pore size decreased with the increase of the ZnO-PEGMA content. Due to the entanglement and favorable interactions between the two crosslinked networks, the IPN hydrogels exhibited excellent mechanical strength and light transmittance. The maximum compressive and tensile strengths of the IPN hydrogels reached 24.8 and 1.98 MPa respectively. The transparent IPN hydrogels transmitted more than 85% of visible light at all wavelengths (400-800 nm). The IPN hydrogels exhibited anti-adhesive property towards Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus), and the bactericidal activity increased with the ZnO-PEGMA content. The incorporation of ZnO-PEGMA did not reduce the biocompatibility of the IPN hydrogels and all the IPN nanocomposites showed negligible cytotoxicity. The present study not only provided a facile method for preparing hydrogel nanocomposites with IPN structure but also developed a new hydrogel material which might be an excellent candidate for wound dressings.