Integrated Heterogeneous Engineering with the Vacancy Defect of Porous CoPv-MoxPv Nanosheets for an Accelerated Hydrogen Evolution Reaction.

Electrochemical water splitting is a possible way of realizing sustainable and clean hydrogen production but is challenging, because a highly active and durable electrocatalyst is essential. In this work, we integrated heterogeneous engineering and vacancy defect strategies to design and fabricate a heterostructure electrocatalyst (CoPv-MoxPv/CNT) with abundant phosphorus vacancies attached to carbon nanotubes (CNTs). The vacancy defects enabled the optimization of the electronic structure; thereby, the electron-rich low-valent metal sites enhanced the ability of nonmetallic P to capture proton H. Meanwhile, the heterogeneous interface between bimetallic phosphides and CNTs realized rapid electron transfer. In addition, the Co, Mo, and P active species in the electrocatalytic process exposed increased amounts of active sites featuring porous nanosheet structures, which facilitated the adsorption of reaction intermediates and thus enhanced the hydrogen evolution reaction performance. In particular, the optimized CoPv-MoxPv/CNT catalyst possesses an overpotential of 138 mV at a current density of 10 mA cm-2 and long-term stability for 24 h. This work offers insights and possibilities for the engineering and exploration of transition metal-based electrocatalysts through combining multiple synergistic strategies.

Unique sandwich-cookie-like nanosheet array heterojunction bifunctional electrocatalyst towards efficient overall water/seawater splitting.

Construction of multi-component heterostructures is an effective strategy for electrocatalysts to improve both the hydrogen evolution reaction (HER) at the cathode and the oxygen evolution reaction (OER) activity at the anode. Herein, an efficient bifunctional electrocatalyst towards overall water/seawater splitting (OW/SS) is reported with strategy of heterostructure construction (ruthenium/nickel phosphorus) on nickel hydroxide (Ni(OH)2). With the unique hydrolysis layer (Ni(OH)2), the processes of H2O hydrolysis and the adsorption/desorption of H*/O-containing intermediates (OH, O, OOH) were greatly boosted by Ru and P sites, which acted as the catalytic active centers of OER and HER, respectively. In addition, the electronic structure reconfiguration was realized through the strong interaction between multi-interfaces. For alkaline HER at the current density of 10 mA cm-2, the overpotential of Ru-P-Ni(OH)2/NF (denoted as RNPOH/NF) was 98 mV, whereas just 230 mV of overpotential was essential to stimulate alkaline OER at the current density of 20 mA cm-2. Specifically, as a bifunctional electrocatalyst towards overall water splitting, RNPOH/NF deserves cell voltages of 1.7/1.92 V and 1.75/1.94 V, respectively, to activate current densities of 50/100 mA cm-2 in alkaline water/seawater systems, together with a good durability of 12 h. This work contributes insights to the development of bifunctional electrocatalysts for overall water/seawater splitting.

Dimethyl fumarate covalently modifies Cys673 of NLRP3 to exert anti-inflammatory effects.

The NLRP3 inflammasome plays a pivotal role in various chronic inflammation-driven human diseases. However, no drugs specifically targeting NLRP3 inflammasome have been approved by the Food and Drug Administration (FDA) of the United States. In our current study, we showed that dimethyl fumarate (DMF) efficiently suppressed the activation of the NLRP3 inflammasome induced by multiple agonists and covalently modified Cys673 of NLRP3, thereby impeding the interaction between NLRP3 and NEK7. The inhibitory effect of DMF was nullified by anaplerosis of the Cys673 mutant (but not the wild-type) NLRP3 in Nlrp3-/- THP-1 cells. In vivo experiments, DMF demonstrated protective effects in the dextran sodium sulfate (DSS)-induced ulcerative colitis of WT mice, but not in Nlrp3-/- mice. In summary, our study identified DMF as a direct covalent inhibitor of NLRP3 and a potential candidate for the treatment of NLRP3 inflammasome-mediated diseases.

Si-Ni-San promotes liver regeneration by maintaining hepatic oxidative equilibrium and glucose/lipid metabolism homeostasis.

ETHNOPHARMACOLOGICAL RELEVANCE: The efficacy of clinical treatments for various liver diseases is intricately tied to the liver's regenerative capacity. Insufficient or failed liver regeneration is a direct cause of mortality following fulminant hepatic failure and extensive hepatectomy. Si-Ni-San (SNS), a renowned traditional Chinese medicine prescription for harmonizing liver and spleen functions, has shown clinical efficacy in the alleviation of liver injury for thousands of years. However, the precise molecular pharmacological mechanisms underlying its effects remain unclear. AIMS OF THE STUDY: This study aimed to investigate the effects of SNS on liver regeneration and elucidate the underlying mechanisms. MATERIALS AND METHODS: A mouse model of 70% partial hepatectomy (PHx) was used to analyze the effects of SNS on liver regeneration. Aquaporin-9 knockout mice (AQP9-/-) were used to demonstrate that SNS-mediated enhancement of liver regeneration was AQP9-targeted. A tandem dimer-Tomato-tagged AQP9 transgenic mouse line (AQP9-RFP) was utilized to determine the expression pattern of AQP9 protein in hepatocytes. Immunoblotting, quantitative real-time PCR, staining techniques, and biochemical assays were used to further explore the underlying mechanisms of SNS. RESULTS: SNS treatment significantly enhanced liver regeneration and increased AQP9 protein expression in hepatocytes of wild-type mice (AQP9+/+) post 70% PHx, but had no significant effects on AQP9-/- mice. Following 70% PHx, SNS helped maintain hepatic oxidative equilibrium by increasing the levels of reactive oxygen species scavengers glutathione and superoxide dismutase and reducing the levels of oxidative stress molecules H2O2 and malondialdehyde in liver tissues, thereby preserving this crucial process for hepatocyte proliferation. Simultaneously, SNS augmented glycerol uptake by hepatocytes, stimulated gluconeogenesis, and maintained glucose/lipid metabolism homeostasis, ensuring the energy supply required for liver regeneration. CONCLUSIONS: This study provides the first evidence that SNS maintains liver oxidative equilibrium and glucose/lipid metabolism homeostasis by upregulating AQP9 expression in hepatocytes, thereby promoting liver regeneration. These findings offer novel insights into the molecular pharmacological mechanisms of SNS in promoting liver regeneration and provide guidance for its clinical application and optimization in liver disease treatment.

Interface Engineering with the Coupling of a 3D Porous Structure Enables MoP2-NiCoP Heterostructure Nanosheets for Enhanced Alkaline Hydrogen Evolution Reaction.

One of the crucial parts of the electrochemically focused energy conversion and storage system is the hydrogen evolution reaction. The further exploration of electrocatalysts made of nonprecious metals could help to bring the technology closer to industrialization. Here, we present an effective hydrogen evolution reaction (HER) electrocatalyst that employs hydrothermal and phosphorization steps to create three-dimensional (3D) porous MoP2-NiCoP heterostructure nanosheets on nickel foam (MoP2-NiCoP/NF). H2O-dissociation and H-adsorption were effectively achieved due to the distinctive interface engineering between NiCoP and MoP2, which functions as a channel for immediate electron transfer. Compared to the single-component MoP2 and NiCoP, the synergistic interaction between the heterogeneous components coupling and the 3D porous structure enables MoP2-NiCoP/NF to exhibit satisfactory catalytic activity with an ultralow overpotential of 50 mV at 10 mA cm-2, which is close to the commercial Pt/C catalyst in alkaline media. More importantly, it exhibits good stability, with the ability to be electrolyzed in 1.0 M KOH electrolyte for 24 h without a significant change in overpotential. This study offers directions for the design of low-cost, high-activity, transition metal phosphides (TMPs)-based HER catalyst alternatives for future practical applications.

Therapeutic strategies for drug-resistant Pseudomonas aeruginosa: Metal and metal oxide nanoparticles.

Pseudomonas aeruginosa (PA) is a widely prevalent opportunistic pathogen. Multiple resistant strains of PA have emerged from excessive or inappropriate use of antibiotics, making their eradication increasingly difficult. Therefore, the search for highly efficient and secure novel antimicrobial agents is crucial. According to reports, there is an increasing exploration of nanometals for antibacterial purposes. The antibacterial mechanisms involving the nanomaterials themselves, the release of ions, and the induced oxidative stress causing leakage and damage to biomolecules are widely accepted. Additionally, the study of the cytotoxicity of metal nanoparticles is crucial for their antibacterial applications. This article summarizes the types of metal nanomaterials and metal oxide nanomaterials that can be used against PA, their respective unique antibacterial mechanisms, cytotoxicity, and efforts made to improve antibacterial performance and reduce toxicity, including combination therapy with other materials and antibiotics, as well as green synthesis approaches.

Dual-mode fluorescence and electrochemiluminescence sensors based on Ru-MOF nanosheets for sensitive detection of apoE genes.

A fluorescence-electrochemiluminescence (FL-ECL) dual-mode sensor for apoE gene detection has been developed, leveraging the unique properties of ruthenium metal organic framework nanosheets (RuMOFNSs). The system utilizes the quenching effect of the Ru(bpy)32+ ECL signal by ferrocene, leading to the synthesis of a multi-electron electrical signal marker, bisferrocene. By immobilizing the P-DNA on RuMOFNSs, bisferrocene quenches both FL and ECL signals. The addition of T-DNA and the consequent formation of double-stranded DNA enable the ExoIII enzyme to excise the bisferrocene fragment, restoring the signals. The sensor demonstrates wide detection linear ranges (1 fM to 1 nM for FL and 0.01 fM to 10 pM for ECL) and remarkable sensitivity (0.048 fM for FL and 0.016 fM for ECL). The dual-mode design offers enhanced reliability through a self-correction feature, reducing false positives. Compared to single-mode sensors, the dual-mode sensor shows significant advantages. Real-world testing confirms the sensor's capacity for robust detection in actual samples, underscoring its promising application in early disease diagnosis. This innovative approach opens up avenues for multi-signal response sensors, offering significant potential for diagnostic technologies.

Constructing a Functionalized Electrocatalyst of a Transition Metal Chalcogenide on Accordion-Like MXene to Boost the Hydrogen Evolution Reaction.

MXenes exhibit unique layered structures and excellent electrical conductivity, and their multiple surface termination groups are favorable for hosting impressive performance for electrochemical reactions. Therefore, a two-dimensional (2D) layered MXene-based catalyst may become a novel high-efficiency electrocatalyst to replace traditional noble metal electrocatalysts. In this work, a transition metal chalcogenide (MoS2/CuS) and MXene are combined to prepare a 2D electrocatalyst (MoS2/CuS/MXene) for the hydrogen evolution reaction (HER). MXene exhibited a large specific surface area in the shape of an accordion, which was very beneficial for the growth of nanomaterials. CuS/MXene promoted electron transfer and improved the exposed active site for HER. The exposed MoS2 edges exhibited a high chemical adsorption capacity, which is conducive to HER. Electrochemical tests reveal that the MoS2/CuS/MXene electrocatalyst can reduce the charge transfer resistance toward the HER and increase active sites for HER, leading to enhancing the catalytic performance. The MoS2/CuS/MXene electrocatalyst affords an efficient HER with a low overpotential (115 mV@10 mA cm-2). This work offers a new idea to create layered transition metal chalcogenide- and MXene-based electrocatalysts for HER.

Defect engineering with N-doped carbon hybrid cobalt-molybdenum phosphide nanosheets wrapped molybdenum oxide nanorods for alkaline hydrogen evolution reaction.

Regulating the electrocatalytic hydrogen evolution reaction (HER) performance through defect engineering of the surface of the catalysts is an effective pathway. Herein, cobalt-molybdenum phosphide (CoMoP) nanosheets wrapped molybdenum oxide (MoO3) core-shell nanorods (MoO3@CoMoP), as alkaline electrocatalysts with ligand-derived N-doped carbon hybrid and oxygen-vacancies, were synthesized via solvothermal approaches and followed by phosphorization. As expected, the MoO3@MoCoP affords efficient HER with a low overpotential (η) of 84.2 ± 0.4 mV at 10 mA cm-2. After phosphorization, not only the MoCoP active species are incorporated into the catalyst, but also the defects sites are achieved. Impressively, the metal-ligand-derived MoCoP are distributed uniformly in the N-doped carbon hybrid matrix, exhibiting well-exposed active sites. Benefiting from the synergy effect of MoCoP active species and oxygen-vacancy, the MoO3@MoCoP showed increased conductivity and stability, which can deliver a current density of 10 mA cm-2 over 40 h. MoO3@MoCoP exhibits an optimal electronic structure on the surface by charge redistribution at the interface, thereby optimizing the hydrogen adsorption energy and accelerating the hydrogen evolution kinetics. This work paves the way for the design of transition metal electrocatalysts with desirable properties through a promising strategy in the field of energy conversion.

Aquaporin-7 Facilitates Proliferation and Adipogenic Differentiation of Mouse Bone Marrow Mesenchymal Stem Cells by Regulating Hydrogen Peroxide Transport.

Hydrogen peroxide (H2O2) is a major form of reactive oxygen species that play an important role in the survival, proliferation and differentiation of bone marrow mesenchymal stem cells (BMSCs). The regulatory mechanisms of H2O2 homeostasis in BMSCs are not fully understood. Here we demonstrate for the first time that aquaglyceroporin AQP7 is a functional peroxiporin expressed in BMSCs and remarkably upregulated upon adipodenic induction. The proliferation ability of BMSCs from AQP7-/- mice was significantly decreased, as indicated by fewer clonal formation and cell cycle arrest compared with wildtype BMSCs. AQP7 deficiency caused accumulation of intracellular generated H2O2 during BMSCs proliferation, leading to oxidative stress and inhibition of PI3K/AKT and STAT3 signaling pathways. After adipogenic induction, however, the AQP7-/- BMSCs exhibited greatly reduced adipogenic differentiation with fewer lipid droplets formation and lower cellular triglycerides content than wildtype BMSCs. In such case AQP7 deficiency was found to diminish import of extracellular H2O2 produced by plasma membrane NADPH Oxidases, resulting in altered AMPK and MAPK signaling pathways and reduced expression of lipogenic genes C/EBPα and PPARγ. Our data revealed a novel regulatory mechanism of BMSCs function through AQP7-mediated H2O2 transport across plasma membrane. AQP7 is a peroxiporin mediating H2O2 transport across the plasma membrane of BMSCs. During proliferation, AQP7 deficiency results in accumulation of intracellular generated H2O2 due to reduced export, which inhibited STAT3 and PI3K/AKT/insulin receptor signaling pathways and cell proliferation. During adipogenic differentiation, however, AQP7 deficiency blocked the uptake of extracelluar H2O2 generated through plasma membrane NOX enzymes. The reduced intracellular H2O2 level causes decreased expression of lipogenic genes C/EBPα and PPARγ due to altered AMPK and MAPK signaling pathways, leading to impaired adipogenic differentiation.

Identification of TaGL1-B1 gene controlling grain length through regulation of jasmonic acid in common wheat.

Grain length is one of the most important factors in determining wheat yield. Here, a stable QTL for grain length was mapped on chromosome 1B in a F10 recombinant inbred lines (RIL) population, and the gene TaGL1-B1 encoding carotenoid isomerase was identified in a secondary large population through multiple strategies. The genome-wide association study (GWAS) in 243 wheat accessions revealed that the marker for TaGL1-B1 was the most significant among all chromosomes. EMS mutants of TaGL1 possessed significantly reduced grain length, whereas TaGL1-B1-overexpressed lines possessed significantly increased grain length. Moreover, TaGL1-B1 strongly interacted with TaPAP6. TaPAP6-overexpressed lines had significantly increased grain length. Transcriptome analysis suggested that TaPAP6 was possibly involved in the accumulation of JA (jasmonic acid). Consistently, JA content was significantly increased in the TaGL1-B1 and TaPAP6 overexpression lines. Additionally, the role of TaGL1-B1 in regulating carotenoids was verified through QTL mapping, GWAS, EMS mutants and overexpression lines. Notably, overexpression of TaGL1-B1 significantly increased wheat yield in multiple locations. Taken together, overexpression of TaGL1-B1 enhanced grain length, probably through interaction with TaPAP6 to cause the accumulation of JA that improved carotenoid content and photosynthesis, thereby resulted in increased wheat yield. This study provided valuable genes controlling grain length to improve yield and a potential insight into the molecular mechanism of modulating JA-mediated grain size in wheat.

Pt-Doped Biomass Carbon Decorated with MoS2 Nanosheets as an Electrocatalyst for Hydrogen Evolution.

It is necessary to develop an efficient hydrogen evolution catalyst to improve the efficiency of the hydrogen evolution reaction (HER). Herein, a MoS2 nanosheet is decorated on the Pt-doping biomass yeast cells (MoS2@Pt/YC) via a simple hydrothermal process. Reducing the noble metal loading without compromising its performance is a challenging task. The smooth surface of YCs is conducive to the growth of MoS2 nanosheets, and its functional groups provide attachment sites for metal Pt. The Pt/YC is covered with MoS2 nanosheets, thus improving the exposed active sites for HER. The obtained MoS2@Pt/YC delivers a competitive overpotential of 118 mV at the benchmark current density of 10 mA cm-2 and achieves a small Tafel slope of 74 mV dec-1, indicating the great HER performance of MoS2@Pt/YC. Moreover, MoS2@Pt/YC shows robust stability after 24 h of continuous operation toward HER in acidic solution. By introducing transition metal sulfides with high specific surface area, the loading of precious metals can be reduced without compromising properties. This work provides a method to design Pt-doping HER electrocatalysts through a simple method. The facile preparation process for MoS2@Pt/YC and its outstanding performance allow it to be a promising electrocatalyst for practical HER application.

Evaluation of volume changes following lateral window maxillary sinus floor elevation using Minics software.

Background: Significant volume changes at the site of lateral window maxillary sinus floor elevation have been reported 6 months postoperatively, with stabilization thereafter. However, at present, there is no consensus regarding the gold standard to assess the shape and volume of the bone graft site after implantation. This study aimed to analyze volume changes in the lateral window maxillary sinus floor elevation region using Minics software. Methods: We analyzed 40 patients who underwent lateral window maxillary sinus floor elevation surgery at the Stomatology Department of Binhaiwan Central Hospital, Dongguan, China between 2017 and 2020. Twenty patients underwent lateral window maxillary sinus floor elevation with simultaneous implantation, while 20 patients underwent lateral window maxillary sinus floor elevation with delayed implantation 6 months later. Minics software was used for three-dimensional analysis of the elevation site on the day after surgery (T1) and 6 months after surgery (T2) in both groups. Results: The elevation site volume was reduced 6 months after lateral window maxillary sinus floor elevation. The differences in the length, width, height from the tip, and volume of the implant between T1 and T2 were statistically significant. Conclusions: The length, width, height, and volume of the lateral window maxillary sinus floor elevation region were reduced using Minics software, suggesting that the volume of the elevation site should be enlarged as much as possible during the operation to prevent volume shrinkage.

ZIF-67-Derived (NiCo)S2@NC Nanosheet Arrays Hybrid for Efficient Overall Water Splitting.

Electrocatalytic water splitting is considered a promising approach to obtain clean and sustainable hydrogen energy. The integration of optimal nanoarchitecture and multicomponent synergy has been a significant factor for designing a bifunctional electrocatalyst to promote the cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER). In particular, the charge migration, mass transfer, and gas release rate in the catalyzing process are closely correlated with the architecture of the catalyst. Here, ZIF-67-derived N-doped carbon nanofiber-supported (NiCo)S2 nanosheet [(NiCo)S2/NCNF] as a bifunctional electrocatalyst was synthesized using electrospinning, template etching, and subsequent gas sulfidation method. The hierarchical hybrid nanofiber with inner hollow cubes and outer nanosheets provides easy electron penetration, high charge/mass transportation efficiency, and robust structure stability. Furthermore, the MOF-derived carbon-encapsuled bimetal-sulfide and the synergistic effect of double active centers are conducive to an exceptional performance, showing low overpotentials of 177 and 203 mV to drive a current density of 10 mA cm-2 and robust stability for the HER and OER, respectively. Meanwhile, the (NiCo)S2/NCNF electrodes exhibit a small voltage of 1.61 V for overall water splitting activity with an electrolyzer cell at current densities of 10 mA cm-2 over 12 h. This work presents novel insights into the bifunctional catalyst for promoting the overall water splitting via a MOF-derived nanoarchitecture and multicomponent synergy.

Diagnostic value of oral "beefy red" patch combined with fingertip blood mean corpuscular volume in vitamin B12 deficiency.

OBJECTIVES: To investigate the diagnostic value of accessible fingertip mean corpuscular volume (MCV) combined with a visible "beefy red" patch in the diagnosis of vitamin B12 (VB12) deficiency in local clinics and hospitals without in-house clinical laboratories, especially in remote areas. MATERIALS AND METHODS: The medical history data of patients complaining of oral mucosal pain at the Stomatological Hospital of Southern Medical University were reviewed. All included patients underwent fingertip blood routine examination, specific serological test (serum VB12, folic acid, iron, and ferritin), and detailed oral clinical examinations. According to the results of the serum VB12 test patients were divided into case and control groups. In diagnostic test, the diagnostic value of the "beefy red" patch and elevated MCV in VB12 deficiency was evaluated by the receiver operator characteristic curve. RESULTS: There were more female patients than male patients in the case group (serum VB12 level < 148 pmol/L, n = 81) and control group (serum VB12 level ≥ 148 pmol/L, n = 60), mostly middle-aged and elderly patients. There were no statistical differences in gender and age between the two groups. In the case group, the number of individuals with stomach disease was 13, the number of individuals with "beefy red" patch was 78, the number of individuals with oral ulcer was 29, the number of individuals with "MCV > 100fL" and "folic acid < 15.9 nmol/L" were respectively 68 and 5. All were more than that in control group (P < 0.05). The diagnostic test, "beefy red patch" has high sensitivity (0.963) but low specificity(0.883), "MCV > 100 fL" has high specificity (0.933) but low specificity (0.815), and "MCV > 100 fL combined with beefy red patch" has maximal specificity (0.950), and area under the curve (0.949). CONCLUSIONS: Visible oral "beefy red" patch combined with accessible fingertip blood MCV could improve the rate of diagnosis in VB12 deficiency, especially in the elderly in local clinics and hospitals without in-house clinical laboratories in China, which is conducive to early disease detection and treatment.

Recent advances in immunoassay technologies for the detection of human coronavirus infections.

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is the seventh coronavirus (CoV) that has spread in humans and has become a global pandemic since late 2019. Efficient and accurate laboratory diagnostic methods are one of the crucial means to control the development of the current pandemic and to prevent potential future outbreaks. Although real-time reverse transcription-polymerase chain reaction (rRT-PCR) is the preferred laboratory method recommended by the World Health Organization (WHO) for diagnosing and screening SARS-CoV-2 infection, the versatile immunoassays still play an important role for pandemic control. They can be used not only as supplemental tools to identify cases missed by rRT-PCR, but also for first-line screening tests in areas with limited medical resources. Moreover, they are also indispensable tools for retrospective epidemiological surveys and the evaluation of the effectiveness of vaccination. In this review, we summarize the mainstream immunoassay methods for human coronaviruses (HCoVs) and address their benefits, limitations, and applications. Then, technical strategies based on bioinformatics and advanced biosensors were proposed to improve the performance of these methods. Finally, future suggestions and possibilities that can lead to higher sensitivity and specificity are provided for further research.

The survival rates and risk factors of implants in the early stage: a retrospective study.

BACKGROUND: Few large-sample studies in China have focused on the early survival of dental implants. The present study aimed to report the early survival rates of implants and determine the related influencing factors. METHODS: All patients receiving dental implants at our institution between 2006 and 2017 were included. The endpoint of the study was early survival rates of implants, according to gender, age, maxilla/mandible, dental position, bone augmentation, bone augmentation category, immediate implant, submerged implant category, implant diameter, implant length, implant torque, and other related factors. Initially, SPSS22.0 was used for statistical analysis. The Chi-square test was used to screen all factors, and those with p < 0.05 were further introduced into a multiple logistic regression model to illustrate the risk factors for early survival rates of implants. RESULTS: In this study, we included 1078 cases (601 males and 477 females) with 2053 implants. After implantation, 1974 implants were retained, and the early survival rate was 96.15%. Patients aged 30-60 years (OR 2.392), with Class I bone quality (OR 3.689), bone augmentation (OR 1.742), immediate implantation (OR 3.509), and implant length < 10 mm (OR 2.972), were said to possess risk factors conducive to early survival rates. CONCLUSIONS: The early survival rate of implants in our cohort exceeded 96%, with risk factors including age, tooth position, bone quality, implant length, bone augmentation surgery, and immediate implantation. When the above factors coexist, implant placement should be treated carefully.

Reduced expression of lipoxygenase genes improves flour processing quality in soft wheat.

Lipoxygenases (Loxs) are dioxygenases that play an important role in plant growth and defense. Loxs affect flour processing quality in common wheat (Triticum aestivum). We conducted a genome-wide association study (GWAS) that identified 306 significant single-nucleotide polymorphisms (SNPs) related to Lox activity in Chinese wheat accessions. Among them, a novel lipoxygenase-encoding (Lpx) gene, TaLpx-B4, was detected on chromosome 3B in a biparental population. Analysis of mutant wheat lines induced using ethyl methanesulfonate confirmed the role of TaLpx-B4 in modulating Lox activity. A phylogenetic tree of various plant Lpx genes indicated the predominance of the 9-Lpx type in common wheat. Further analysis revealed conserved intron number, exon length, and motif number in the TaLpx gene family. GWAS, linkage mapping, and gene annotation collectively showed that 14 out of 29 annotated TaLpx genes played a critical role in regulating Lox activity in the Chinese wheat accessions. Transgenic wheat grains with knockdown of Lpx family genes by RNAi showed significantly lower Lox activity than the wild type. One TaLpx-RNAi line had significantly reduced starch content and dough stability, and thus possessed relatively superior biscuit quality in soft wheat. Further analysis of the transcriptome, lipid components, and other metabolites revealed that knockdown of TaLpx genes significantly increased biscuit quality via changes in unsaturated fatty acid content as well as in starch, sucrose, and galactose metabolism. Our results provide new insights into the role of the TaLpx gene family that will be beneficial in improving soft wheat flour quality.

A nationwide evaluation of the prevalence of and risk factors associated with anxiety, depression and insomnia symptoms during the return-to-work period of coronavirus disease 2019 in China.

PURPOSE: To evaluate the prevalence of and risk factors associated with anxiety, depression, and insomnia symptoms during the return-to-work period of coronavirus disease 2019 in China. METHODS: The authors conducted a large-scale, nationwide, multicenter, cross-sectional study in China. A population-based quota and snowball sampling were designed to recruit a representative sample. Online questionnaires and telephone reviews were used to collect characteristics and assess psychological and sleep problems. Anxiety, depression, and insomnia symptoms were measured by the generalized anxiety disorder-7, patient health questionnaire-9, and insomnia severity index tools. RESULTS: A total of 42,000 participants were recruited from 15 centers, and 36,795 valid questionnaires were received. Generally, 18.3, 14.9, and 17.9% of the participants had anxiety, depression, and insomnia symptoms, respectively, and 2.2-2.7% had severe symptoms. Engaging in outside activity once in ≥ 30 days (OR = 2.719, OR = 2.074, OR = 2.225) and age 50-64 years (OR = 2.431, OR = 1.936, OR = 2.036) were common risk factors for anxiety, depression and insomnia symptoms. Living in Hubei Province (OR = 1.304, OR = 1.242) was a common risk factor for anxiety and insomnia symptoms. Working as frontline medical staff (OR = 2.150) was another risk factor for anxiety symptoms. The health education rate of the samples reached 98.9%. However, the psychological intervention rate was only 16.2%, and 2.5% received targeted interventions. CONCLUSIONS: An increasing number of people might have psychological and sleep problems. However, the current psychological interventions are not sufficient. Efforts should be made to strengthen interventions for high-risk populations.

Status and influential factors of anxiety depression and insomnia symptoms in the work resumption period of COVID-19 epidemic: A multicenter cross-sectional study.

OBJECTIVE: In this study, the authors analyzed the status of anxiety depression and insomnia symptoms and influential factors in the work resumption period of Coronavirus disease 2019 (COVID-19). METHODS: A multicenter cross-sectional survey was conducted from March 2, 2020 to March 8, 2020 in Shandong Province, China, using quota sampling combined with snowball sampling. The Generalized Anxiety Disorder-7 (GAD-7), the Patient Health Questionnaire-9 (PHQ-9), and the Insomnia Severity Index (ISI) were used to assess the anxiety, depression, and insomnia symptoms. The multivariate logistic regression analysis was used to explore the influential factors. RESULTS: A total of 4000 invitations were sent from three centers, 3237 valid questionnaires were received. Based on GAD-7, PHQ-9, and ISI scales, 19.5%-21.7% of the participants had anxiety, depression, or insomnia symptoms; 2.9%-5.6% had severe symptoms. Besides, 2.4%, 4.8%, and 4.5% of the participants had anxiety-depression, anxiety-insomnia, or depression-insomnia combined symptoms. The scores of anxiety and insomnia symptoms, along with scores of depression and insomnia symptoms were positively correlated in these samples. Aged 50-64 years and outside activities once in ≥30 days were risk factors of anxiety, depression, and insomnia symptoms in common. During the epidemic, 17.4% of the participants had received psychological interventions, and only 5.2% had received individual interventions. CONCLUSIONS: The incidence of psychological distress increased during the outbreak of COVID-19 in the work resumption period than the normal period. Current psychological interventions were insufficient; target psychological interventions should be conducted in time.