Serum alpha-fetoprotein level is correlated with the level of inflammatory markers in the immune-clearance phase of chronic hepatitis B in Eastern China.

PURPOSE: To clarify the association of serum alpha-fetoprotein (AFP) with inflammatory markers interleukin (IL)-6 and tumor necrosis factor (TNF)-α in patients with chronic hepatitis B (CHB) during the immune-clearance phase in Eastern China. METHODS: This research selected 60 CHB patients during the immune clearance phase who tested positive for AFP, including 32 cases treated by non-antiviral therapy (experimental group) and 28 cases treated by antiviral therapy (positive control group). Another 30 cases tested negative for AFP were set as a negative control group. The correlations of serum AFP with IL-6 and TNF-α in patients were analyzed. RESULTS: HBV DNA clearance in patients receiving antiviral therapy, in both the positive or negative control groups, was not significantly related to other clinical data. In the experimental group, a positive correlation of HBV DNA clearance with serum AFP level (r=0.5126, P=0.0027), alanine aminotransferase (r=0.3924, P=0.0263), and total bilirubin (r=0.5126, P=0.0027) was found. The experimental and positive control groups exhibited elevated serum IL-6 and TNF-α contents versus the negative control group (P<0.05). A positive association of AFP with IL-6 and TNF-α was also identified. CONCLUSION: Serum AFP level is positively related to IL-6 and TNF-α levels in CHB patients during the immune-clearance phase.

Multi-scale assessment of water security under climate change in North China in the past two decades.

Climate change is projected to affect the hydrological cycles in China, while the effects are expected to vary spatiotemporally. Understanding the variations in water security conditions and their sensitivity to climatic variables is crucial for assessing regional ecosystem responses to climate change. In the present study, we estimated the water yield capacity, an important indicator of water security in North China (NC), at a spatial resolution of 1 km during the last two decades based on the Budyko framework and quantified the sensitivity of water yield change to climate change among different vegetation types. The results showed that the performances of the Budyko framework were reliable both at the pixel scale and across large watersheds. The annual water yield in North China was estimated to be 7.61 ± 2.67 ∗ 1010 m3/yr, with an average mean water yield (MWY) of 49.51 ± 17.49 mm/yr. The spatial pattern of mean water yield change (MWYC) exhibited high heterogeneity; 46% of the study region was dominated by an increasing trend, while 9.84% was statistically significant (P < 0.05). Compared with temperature, the water yield capacity was more sensitive to precipitation variation. A consistent trend of variation was found in cropland between water yield and precipitation, while negative sensitivity coefficients were found in natural vegetation types. The variation in sensitivity coefficients (Swyp) in natural vegetation showed that in regions with a decrease in precipitation, the variation in water yield capacity also decreased, while in regions with an increase in precipitation from 0 to 8 mm/yr, the water yield capacity first decreased and then increased with precipitation. Our findings suggest that grass and shrubs would be more beneficial to regional water security in North China's revegetation, while afforestation would provide protection for the regional environment from extreme rainfall events.

Immunisation of Sheep with Bovine Viral Diarrhoea Virus, E2 Protein Using a Freeze-Dried Hollow Silica Mesoporous Nanoparticle Formulation.

Bovine viral diarrhoea virus 1 (BVDV-1) is arguably the most important viral disease of cattle. It is associated with reproductive, respiratory and chronic diseases in cattle across the world. In this study we have investigated the capacity of the major immunological determinant of BVDV-1, the E2 protein combined with hollow type mesoporous silica nanoparticles with surface amino functionalisation (HMSA), to stimulate immune responses in sheep. The current work also investigated the immunogenicity of the E2 nanoformulation before and after freeze-drying processes. The optimal excipient formulation for freeze-drying of the E2 nanoformulation was determined to be 5% trehalose and 1% glycine. This excipient formulation preserved both the E2 protein integrity and HMSA particle structure. Sheep were immunised three times at three week intervals by subcutaneous injection with 500 µg E2 adsorbed to 6.2 mg HMSA as either a non-freeze-dried or freeze-dried nanoformulation. The capacity of both nanovaccine formulations to generate humoral (antibody) and cell-mediated responses in sheep were compared to the responses in sheep immunisation with Opti-E2 (500 µg) together with the conventional adjuvant Quil-A (1 mg), a saponin from the Molina tree (Quillaja saponira). The level of the antibody responses detected to both the non-freeze-dried and freeze-dried Opti-E2/HMSA nanoformulations were similar to those obtained for Opti-E2 plus Quil-A, demonstrating the E2 nanoformulations were immunogenic in a large animal, and freeze-drying did not affect the immunogenicity of the E2 antigen. Importantly, it was demonstrated that the long term cell-mediated immune responses were detectable up to four months after immunisation. The cell-mediated immune responses were consistently high in all sheep immunised with the freeze-dried Opti-E2/HMSA nanovaccine formulation (>2,290 SFU/million cells) compared to the non-freeze-dried nanovaccine formulation (213-500 SFU/million cells). This study is the first to demonstrate that a freeze-dried silica mesoporous nanovaccine formulation gives balanced immune responses in a production animal.

Input-output modeling for urban energy consumption in Beijing: dynamics and comparison.

Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect) energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce) to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making.

Porous graphitized carbon for adsorptive removal of benzene and the electrothermal regeneration.

Graphitized carbons with mesoporous and macroporous structures were synthesized by a facile template-catalysis procedure using resorcinol and formaldehyde as carbon precursors and particulate hydrated metal oxides as both template and catalyst precursors. The materials were used as novel adsorbents for low-concentration benzene vapor. Furthermore, on the basis of the good electrical conductivities associated with the graphitized structures, an electrothermal desorption technique, which involved passing electric currents through the adsorbents to generate Joule heat, was employed to regenerate the saturated adsorbents and produce enriched benzene vapors. In comparison to microporous activated carbon, the porous graphitized carbons could afford a much quicker and more efficient regeneration by electrothermal desorption technique due to their enhanced conductivity and larger pore sizes. In addition, the concentration of the desorbed organics could be controlled by adjusting the applied voltages, which might be interesting for practical secondary treatment. It is promising that the joint utilization of porous graphitized carbon adsorbents and electrothermal desorption technique might develop effective and energy-saving processes for VOCs removal.

Adsorption and release of biocides with mesoporous silica nanoparticles.

In this proof-of-concept study, an agricultural biocide (imidacloprid) was effectively loaded into the mesoporous silica nanoparticles (MSNs) with different pore sizes, morphologies and mesoporous structures for termite control. This resulted in nanoparticles with a large surface area, tunable pore diameter and small particle size, which are ideal carriers for adsorption and controlled release of imidacloprid. The effect of pore size, surface area and mesoporous structure on uptake and release of imidacloprid was systematically studied. It was found that the adsorption amount and release profile of imidacloprid were dependent on the type of mesoporous structure and surface area of particles. Specifically, MCM-48 type mesoporous silica nanoparticles with a three dimensional (3D) open network structure and high surface area displayed the highest adsorption capacity compared to other types of silica nanoparticles. Release of imidacloprid from these nanoparticles was found to be controlled over 48 hours. Finally, in vivo laboratory testing on termite control proved the efficacy of these nanoparticles as delivery carriers for biopesticides. We believe that the present study will contribute to the design of more effective controlled and targeted delivery for other biomolecules.

A novel color removal adsorbent from heterocoagulation of cationic and anionic clays.

We report the preparation and characterization of a novel nanocomposite adsorbent for anionic dye removal. The nanocomposite adsorbent was prepared by heterocoagulation of delaminated bentonite and layered double hydroxide (LDH) colloids. The effects of preparation conditions, LDH loading, particle size, and calcination temperature of the modified material on the physicochemical properties of this composite adsorbent have been investigated. The optimal conditions for best Reactive Yellow 2 (RY2) dye removal efficiency are a weight ratio of LDH to bentonite of 1:1, LDH particle size 100 nm, and calcination temperature 673 K. The adsorption equilibrium data can be fitted well by the widely accepted adsorption isotherm models.