RESUMO
Microplastics (MPs) have become an environmental and health threat to aquatic species and humans because they are small and can easily reach water bodies for municipal and agricultural uses. MPs have been traced in food commodities and products derived from animals and even found in bottles of drinking water. Current treatment techniques for permanently destroying MPs require high energy inputs and thus are generally cost-inefficient. Atmospheric cold plasma (ACP) is a low-cost energy-efficient technology to produce highly reactive species that can induce physicochemical changes in plastic polymers. This study, for the first time, used ACP as a novel method for MPs treatment. Polypropylene (PP) and low-density polyethylene (LDPE) were used to prepare model MPs. The effects of plasma working gas (oxygen, nitrogen, or their mixture) and post-ACP treatment storage (24 h) on MPs were studied. ACP treatments for 30 min successfully degraded both MPs, by 1.4-11.3% in weight. PP MPs had larger weight reduction than LDPE and the ACP of mixture gas was most effective. PP MPs also showed increased carbonyl index after treatments, to up to 6.89, indicating hydrolytic degradation. For LDPE MPs, oxygen ACP caused more oxidation, but storage did not have an enhancing effect. The results of physicochemical analyses indicated that MPs degradation by ACP was possibly mainly through oxidative and hydrolytic reactions, but further characterizations are needed. This study proves that ACP is a promising strategy to remediate MPs pollution, and thus has great potential for addressing the severe challenges of MPs that the food and agriculture sectors are currently facing.
Assuntos
Microplásticos , Gases em Plasma , Poluentes Químicos da Água , Gases em Plasma/química , Poluentes Químicos da Água/análise , Recuperação e Remediação Ambiental/métodos , Polietileno/química , PolipropilenosRESUMO
As a rapidly growing source of human nutrients, algae biosynthesize diverse metabolites which have promising bioactivities. However, the potential allergenicity of algal components hinder their widespread adoption. This review provides a comprehensive review of various macro and micronutrients derived from algal biomass, with particular focus on bioactive compounds, including peptides, polyphenols, carotenoids, omega-3 fatty acids and phycocyanins. The approaches used to produce algal bioactive compounds and their health benefits (antioxidant, antidiabetic, cardioprotective, anti-inflammatory and immunomodulatory) are summarised. This review particularly focuses on the state-of-the-art of precision fermentation, encapsulation, cold plasma, high-pressure processing, pulsed electric field, and subcritical water to reduce the allergenicity of algal compounds while increasing their bioactivity and bioavailability. By providing insights into current challenges of algae-derived compounds and opportunities for advancement, this review contributes to the ongoing discourse on maximizing their application potential in the food nutraceuticals, and pharmaceuticals industries.
Assuntos
Alérgenos , Humanos , Microalgas , AnimaisRESUMO
Microbubbles (MBs) were incorporated into calcium chloride solution as a novel freezing medium for immersion freezing of grape tomato. The effects of MB size (39, 43, 48 µm mean diameter), entrapped gas (air, N2, CO2) and freezing temperature (-10, -15, -20 °C) on the freezing behavior and quality attributes of tomato were investigated. MBs increased the nucleation temperature from -7.4 to -3.5 °C and reduced the onset time of nucleation from 5.8 to 2.9 min at freezing temperature of -20 °C, which facilitated the formation of small ice crystals within tomato. MB-assisted freezing reduced the drip loss by 13.7-17.0% and improved the firmness of tomato, particularly when MB size and freezing temperature decreased. Freezing tomato with air-MBs did not compromise its nutritional quality, using N2- and CO2-MBs even increased its lycopene content, by 31% and 23%, respectively. The results proved the preservation effect of MBs on fruit during immersion freezing. This study can benefit the fruit and vegetable industry by providing an efficient freezing technology for producing frozen products with high sensory and nutritional quality.
Assuntos
Conservação de Alimentos , Congelamento , Frutas , Microbolhas , Solanum lycopersicum , Solanum lycopersicum/química , Frutas/química , Conservação de Alimentos/métodos , Conservação de Alimentos/instrumentação , Manipulação de Alimentos/instrumentação , Licopeno/química , Valor NutritivoRESUMO
This life cycle assessment (LCA) study analyzed the environmental consequences of integrating microalgae-based wastewater treatment into a shrimp farm with recirculating aquaculture systems (RAS). Microalgae treatment produced <10 % of the system's freshwater eutrophication potential (FEP), marine eutrophication potential (MEP) and global warming potential, which was dominantly contributed by electricity use. Microalgae treatment performed comparably to activated sludge treatment for FEP reduction, and was more effective in remediating marine eutrophication. Replacing coal in electricity mix, particularly with renewables, reduced the system's impacts by up to 90-99 %. Performing the LCA based on system expansion generally obtained higher impacts compared to allocation. Utilizing algal biomass for biogas production reduced the MEP; however, production of feed ingredient and biodiesel were not environmentally beneficial. This study proved the use of microalgae for aquaculture wastewater treatment to be environmentally feasible, the results can guide more sustainable RAS operations and design of full-scale microalgae treatment.
Assuntos
Microalgas , Purificação da Água , Animais , Águas Residuárias , Estudos de Viabilidade , Aquicultura/métodos , Purificação da Água/métodos , Crustáceos , Biocombustíveis , Biomassa , Estágios do Ciclo de VidaRESUMO
Aquaculture is a controlled aquatic farming sector and one of the most important human food sources. Fish farming is one of the predominant, fast-growing sectors that supply seafood products worldwide. Along with its benefits, aquaculture practices can discharge large quantities of nutrients into the environment through non-treated or poorly treated wastewater. This study aims to understand the nutrient composition of fish wastewater and the use of indigenous bacteria, cyanobacteria, and microalgae as an alternative biological treatment method. Wastewater samples from a local fish farming facility were collected and treated using six different species of cyanobacteria and microalgae include Chroococcus minutus, Porphyridium cruentum, Chlorella vulgaris, Microcystis aeruginosa, Chlamydomonas reinhardtii, and Fischerella muscicola. All the samples were incubated for 21 days, and the following parameters were measured weekly: Chemical oxygen demand (COD), phosphate, total dissolved nitrogen, and dissolved inorganic nitrogen. In addition, dissolved organic nitrogen (DON), bioavailable DON (ABDON), and biodegradable DON (BDON) were calculated from the mass-balance equations. Colorimetric and digestive methods were used for the parameter measurements. The results showed that C. reinhardtii reduced the soluble COD concentration by 74.6 %, DON by 94.3 %, and phosphorous by more than 99 %. Moreover, M. aeruginosa, and C. minutus significantly reduced inorganic nitrogen species (>99 %). This alternative fish wastewater treatment method was explored to gain insight into fish wastewater nutrient composition and to create a sustainable alternative to conventional fish wastewater treatment methods.
Assuntos
Chlorella vulgaris , Cianobactérias , Microalgas , Animais , Humanos , Águas Residuárias , Eliminação de Resíduos Líquidos/métodos , Disponibilidade Biológica , Aquicultura , Nitrogênio/análise , BiomassaRESUMO
Aquaponics is an integrated food production system that intensively produces a diverse array of seafood and specialty crops in one closed-loop system, which is a potential solution to global challenges of food security. While current aquaponics systems are commonly operated with freshwater, marine aquaponics is an emerging opportunity to grow saltwater animals and plants. Although marine aquaponics can reduce the dependence on freshwater for food production, its environmental sustainability has not been systematically studied. This paper presents the first life cycle assessment (LCA) on a marine aquaponic production system growing shrimp and three halophytes. The system assessed covered from shrimp larvae nursery to grow-out. The effects of salinity, carbon/nitrogen (C/N) ratio and shrimp-to-plant stocking density ratio of aquaponics on its midpoint and endpoint environmental impacts were evaluated using a functional unit based on the economic value of the four products. Electricity use for aquaponic operation was the environmental hotspot, contributing â¼90 % to all the midpoint impacts. The system produced higher environmental impacts when operated at higher salinity, but lower C/N ratio and stocking density. Replacing fossil fuel with wind power for electricity generation can decrease the environmental impacts by 95-99 %. Variation in the shrimp price can change the impacts by up to 62 %. This study provides a useful tool to help marine aquaponic farmers improve their production from an environmental perspective, and can serve as groundwork for further assessing more marine aquaponic systems with different animal-plant combinations.
Assuntos
Aquicultura , Produtos Agrícolas , Animais , Hidroponia , Nitrogênio , Alimentos Marinhos , Estágios do Ciclo de VidaRESUMO
Shrimp production facilities produce large quantities of wastewater, which consists of organic and inorganic pollutants. High concentrations of these pollutants in shrimp wastewater cause serious environmental problems and, therefore, a method of treating this wastewater is an important research topic. This study investigated the impact of algae and indigenous bacteria on treating shrimp wastewater. A total of four different microalgae cultures, including Chlorococcum minutus, Porphyridum cruentum, Chlorella vulgaris and Chlorella reinhardtii along with two cyanobacterial cultures, Microcystis aeruginosa and Fishcherella muscicola were used with indigenous bacterial cultures to treat shrimp wastewater. The highest soluble chemical oxygen demand (sCOD) removal rate (95%) was observed in the samples that were incubated using F. muscicola. Total dissolved nitrogen was degraded >90% in the C. vulgaris, M. aeruginosa, and C. reinhardtii seeded samples. Dissolved organic nitrogen removal was significantly higher for C. vulgaris (93%) as compared to other treatments. Similarly, phosphate degradation was very successful for all the algae-bacteria consortium (>99%). Moreover, the degradation kinetics were calculated, and the lowest half-life (t1/2) for sCOD (5 days) was recorded for the samples seeded with M. aeruginosa. Similarly, treatment with F. muscicola and C. reinhardtii showed the lowest t1/2 of NH3-N (2.9 days) and phosphate (2.7 days) values. Overall, the results from this study suggest that the symbiotic relationship between indigenous bacteria and algae significantly enhanced the process of shrimp wastewater treatment within 21 days of incubation. The outcome of this study supports resource recovery in the aquaculture sector and could be beneficial to treat a large-scale shrimp facility's wastewater worldwide.
Assuntos
Aquicultura , Águas Residuárias , Animais , Águas Residuárias/microbiologia , Águas Residuárias/química , Penaeidae/microbiologia , Eliminação de Resíduos Líquidos/métodos , Nitrogênio/análise , Bactérias/metabolismo , Microalgas , Biodegradação Ambiental , Poluentes Químicos da Água/análise , Análise da Demanda Biológica de OxigênioRESUMO
The electrocoagulation (EC) and electrooxidation (EO) processes are employed widely as treatment processes for industrial, agricultural, and domestic wastewater. In the present study, EC, EO, and a combination of EC + EO were evaluated as methods of removing pollutants from shrimp aquaculture wastewater. Process parameters for electrochemical processes, including current density, pH, and operation time were studied, and response surface methodology was employed to determine the optimum condition for the treatment. The effectiveness of the combined EC + EO process was assessed by measuring the reduction of targeted pollutants, including dissolved inorganic nitrogen species, total dissolved nitrogen (TDN), phosphate, and soluble chemical oxygen demand (sCOD). Using EC + EO process, more than 87% reduction was achieved for inorganic nitrogen, TDN, and phosphate, while 76.2% reduction was achieved for sCOD. These results demonstrated that the combined EC + EO process provided better treatment performance in removing the pollutants from shrimp wastewater. The kinetic results suggested that the effects of pH, current density, and operation time were significant on the degradation process when using iron and aluminum electrodes. Comparatively, iron electrodes were effective at reducing the half-life (t1/2) of each of the pollutants in the samples. The application of the optimized process parameters on shrimp wastewater could be used for large-scale treatment in aquaculture.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Águas Residuárias , Eliminação de Resíduos Líquidos/métodos , Técnicas Eletroquímicas/métodos , Resíduos Industriais/análise , Análise da Demanda Biológica de Oxigênio , Eletrodos , Aquicultura , FerroRESUMO
Membrane filtration is a key technology in dairy processing for the separation of dairy liquids to clarify, concentrate, and fractionate a variety of dairy products. Ultrafiltration (UF) is widely applied for whey separation, protein concentration and standardization, and lactose-free milk production, though its performance can be hindered by membrane fouling. As an automated cleaning process commonly used in the food and beverage industries, cleaning in place (CIP) uses large amounts of water, chemicals, and energy, resulting in significant environmental impacts. This study introduced micron-scale air-filled bubbles (microbubbles; MBs) with mean diameters smaller than 5 µm into cleaning liquids to clean a pilot-scale UF system. During the UF of model milk for concentration, cake formation was identified as the dominant membrane fouling mechanism. The MB-assisted CIP process was conducted at two bubble number densities (2021 and 10,569 bubbles per mL of cleaning liquid) and two flow rates (130 and 190 L/min). For all the cleaning conditions tested, MB addition largely increased the membrane flux recovery by 31-72%; however, the effects of bubble density and flow rate were insignificant. Alkaline wash was found to be the main step in removing proteinaceous foulant from the UF membrane, though MBs did not show a significant effect on the removal due to the operational uncertainty of the pilot-scale system. The environmental benefits of MB incorporation were quantified by a comparative life cycle assessment and the results indicated that MB-assisted CIP had up to 37% lower environmental impact than control CIP. This is the first study incorporating MBs into a full CIP cycle at the pilot scale and proving their effectiveness in enhancing membrane cleaning. This novel CIP process can help reduce water and energy use in dairy processing and improve the environmental sustainability of the dairy industry.
RESUMO
pH is the major issue that concerns all producers in aquaponics, as the main three organisms (aquatic animal, plant, and microbes) have different preferences. Additional C is a potential approach to amend the growing environment and improve shrimp and plant growth, and microbe establishment. Aquaponics under saline conditions has, however, not been studied in detail in regard to the effect of pH and additional C. In this study, we evaluate the impact of pH and additional C on the growth of Pacific whiteleg shrimp and five edible plants (three halophytes and two glycophytes) in marine aquaponic systems using nutrient film technique (NFT). The results indicated that plants grow better in both pH 6.5 treatments; however, additional C improved the growth in pH 7.5 + C treatment and had similar yield to lower pH treatments. The results indicated both pH and additional C had little impact on shrimp growth. In conclusion, adding C can be a practical solution to the pH conundrum for marine aquaponics. Appling additional C was suggested for the operation of marine aquaponic food production system when the pH is high.
RESUMO
Food processing represents a critical part of the food supply chain that converts raw materials into safe and nutritious food products with high quality. However, the fast-growing food processing industry has imposed enormous burdens on the environment. Life cycle assessment (LCA) is widely used for evaluating the sustainability of food systems; nonetheless, current attention mainly concentrates on the agricultural production stage. This article reviews recent LCA studies on dairy, fruits and vegetables, and beverage products, with a particular emphasis on their processing stage. The environmental impacts of various foods are summarized, and the hotspots in their processing lines as well as potential remediation strategies are highlighted. Moreover, an outlook on the environmental performance of nonthermal processing, modified atmosphere packaging, and active packaging is provided, and future research directions are recommended. This review enables quantitative assessments and comparisons to be made by food manufacturers that are devoted to implementing sustainable processing technologies.
Assuntos
Agricultura , Meio Ambiente , Animais , Embalagem de Alimentos , Estágios do Ciclo de Vida , VerdurasRESUMO
BACKGROUND: Polyunsaturated oils have various health-promoting effects, however, they are highly prone to oxidation. Encapsulation using biopolymers is one of the most effective strategies to enhance oil stability. This research examined the potential of gum arabic and maltodextrin for microencapsulation of omega-3 rich oils, aiming to enhance encapsulation efficiency and stability of encapsulated oil. RESULTS: We encapsulated fish and flaxseed oils by emulsification-spray drying. Spray-dried microcapsules were prepared by oil-in-water emulsions consisting of 10 wt% oil and 30 wt% biopolymer (gum arabic, maltodextrin, or their mixture). Results showed that both microcapsules were spherical in shape with surface shrinkage, and exhibited amorphous structures. Gum arabic-based microcapsules had higher encapsulation efficiency as well as better storage stability for both types of oil. Flaxseed oil microcapsules generally had higher oxidative stability regardless of the type of wall material. CONCLUSIONS: Through a comprehensive characterization of the physical and chemical properties of the emulsions and resulting microcapsules, we proved gum arabic to be a more effective wall material for polyunsaturated oil microencapsulation, especially flaxseed oil. This study provides a promising approach to stabilize oils which are susceptible to deterioration, and facilitates their wider uses as food and nutraceutical products. © 2021 Society of Chemical Industry.
Assuntos
Biopolímeros/química , Composição de Medicamentos/métodos , Ácidos Graxos Ômega-3/química , Ácidos Graxos Insaturados/química , Óleos de Peixe/química , Goma Arábica/química , Óleo de Semente do Linho/química , Polissacarídeos/química , Cápsulas/química , Emulsões/química , OxirreduçãoRESUMO
Fenugreek is a good source of galactomannan, however, conventional methods for its extraction are generally time-consuming and have relatively low recovery rates. In this study, we applied high voltage atmospheric cold plasma (HVACP) as a pretreatment and investigated its effects on galactomannan extraction from dry fenugreek seeds and soaked seeds in NaCl solution, as well as its physicochemical properties. Results showed that HVACP treatment with air at 80 kV for 30 min caused apparent structural disruption on fenugreek seed surface and decreased the pH of extracting solution, resulting in increased galactomannan extraction yields, by 122% from soaked seeds and 67% from dry seeds. Galactomannan treated with HVACP had higher water-binding capacity, swelling index and viscosity, as well as lower melting enthalpy. HVACP treatment also altered the surface morphology of galactomannan due to plasma etching, but no significant changes in its molecular and crystalline structures were observed. The findings of this study prove that HVACP can be a green approach, in terms of reduced chemical use, to effectively enhance the extraction efficiency of fenugreek galactomannan and modify its functional properties, hence facilitate more diverse applications in both food and polymer industries.
Assuntos
Gases em Plasma , Trigonella , Galactose/análogos & derivados , Mananas , ViscosidadeRESUMO
Food production substantially depletes the environment in different ways, but little is known about how overall dietary patterns relate to these environmental impacts. The objective of this study was to evaluate the environmental performance of different dietary patterns among U.S. adults using life cycle assessment (LCA). A "typical" dietary pattern was compared with those recommended by the Dietary Guidelines for Americans, including "healthy U.S.", Mediterranean and lacto-ovo vegetarian. Supplemental functional units (FUs) were applied to incorporate the functions of food to provide nutrition and satiety, namely Nutrient Rich Foods Index 9.3 (NRF9.3), Nutritional Quality Index (NQI), and Fullness Factor™ (FF). Life cycle inventory data was collected for 14 food categories consisting of 76 component foods, and their midpoint environmental impacts were calculated, with particular focus on global warming potential. Diets in accordance with different patterns were constructed from selected component foods at a reference energy amount of 2000 kcal. Vegetarian diets on average generated the lowest carbon footprint regardless of the FU. However, large possible variations in the environmental profiles of the compared diets were identified due to the wide range of food choices within a pattern, which showed highly different nutrition and satiety scores even within the same food category. Animal products, including meat and dairy especially, and discretionary foods were identified as the specific food categories that contributed the most to the global warming potential. Discretionary foods consistently exhibited higher impacts on the basis of nutritional FUs due to their low nutrient density. The results can be implied as practical guidelines to help reduce the carbon footprint associated with current U.S. diets without compromising their nutritional adequacy and satiety.
Assuntos
Dieta , Política Nutricional , Animais , Carne , Valor Nutritivo , Estados UnidosRESUMO
A novel homogeneous polysaccharide (CMP-III) was extracted and purified from C. militaris. Structural characterization revealed that CMP-III had an average molecular weight of 4.796 × 104 kDa and consisted of glucose, mannose and galactose with the molar ratio of 8.09:1.00:0.25. The main linkage types of CMP-III consisted of 1 â 4)-α-D-Glc (70.08%), 1 â 4,6)-α-D-Man (9.59%), 1â)-α-D-Man (10.79%) and 1 â 2,6)-α-D-Gal (3.93%) based on methylation and NMR analysis. The immunomodulatory assay indicated that CMP-III significantly promoted macrophage phagocytosis and secretion of NO, TNF-α and IL-6. Further study suggested that macrophage activated by CMP-III involved mitogen-activated protein kinases (MAPKs) and nuclear factor kappa-B (NF-κB) signaling pathways. Overall, these results suggested that CMP-III could be developed as a potent immunomodulatory agent for use in functional foods and dietary supplements.
Assuntos
Cordyceps/química , Cordyceps/imunologia , Polissacarídeos/química , Polissacarídeos/imunologia , Animais , Linhagem Celular , Carboidratos da Dieta/síntese química , Carboidratos da Dieta/imunologia , Galactose/química , Galactose/imunologia , Fatores Imunológicos/imunologia , Macrófagos/imunologia , Manose/imunologia , Camundongos , Proteínas Quinases Ativadas por Mitógeno/imunologia , Peso Molecular , NF-kappa B/imunologia , Fagocitose/imunologia , Células RAW 264.7 , Fator de Necrose Tumoral alfa/imunologiaRESUMO
Flax gum (FG) was extracted and purified from flaxseed (Linum usitatissimum L.) locally called as Alsi. Physicochemical and functional aspects of separated gum were interrogated in detail. Fourier Transform Infrared Spectroscopy analysis depicted variety of peaks in region of 3308.8, 2923.60, 1739.97 & 1149.68 cm-1 which are feature of typical polysaccharide. Functional properties of FG depicted higher water holding ability and lower oil holding aptitude compared to reference materials. Foaming capacity, swelling index and foaming stability of FG were 27.5%, 55.0% and 10.5% respectively which were higher than reference gums. Highest emulsion stability was evident at 0.5% concentration >95.Monosaccharide composition depicted the acidic and neural behavior of heteopolysaccharide FG. Thermal analysis revealed that FG was highly stable. XRD analysis depicted amorphous behavior. SEM imaging indicated a splendor and shiny surface of FG. In conclusion, FG is suitable for variety of food formulations as a thickener, stabilizer, and moisture-retaining agent.
RESUMO
BACKGROUND: With the ability to tailor wavelengths necessary to the photosynthetically active radiation spectrum of plant pigments, light-emitting diodes (LEDs) offer vast possibilities in horticultural lighting. The influence of LED light irradiation on major postharvest features of banana was investigated. Mature green bananas were treated daily with selected blue (464-474 nm), green (515-525 nm) and red (617-627 nm) LED lights for 8 days, and compared with non-illuminated control. RESULTS: The positive effect of LED lighting on the acceleration of ripening in bananas was greatest for blue, followed by red and green. Under the irradiation of LED lights, faster peel de-greening and flesh softening, and increased ethylene production and respiration rate in bananas were observed during storage. Furthermore, the accumulations of ascorbic acid, total phenols, and total sugars in banana fruit were enhanced by LED light exposure. CONCLUSION: LED light treatment can induce the ripening of bananas and improve their quality and nutrition potential. These findings might provide new chemical-free strategies to shorten the time to ripen banana after harvest by using LED light source. © 2018 Society of Chemical Industry.