[Advances in microchip electrophoresis for the separation and analysis of biological samples].

Microchip electrophoresis is a separation technology that involves fluid manipulation in a microchip; the advantages of this technique include high separation efficiency, low sample consumption, and fast and easy multistep integration. Microchip electrophoresis has been widely used to rapidly separate and analyze complex samples in biology and medicine. In this paper, we review the research progress on microchip electrophoresis, explore the fabrication and separation modes of microchip materials, and discuss their applications in the detection and analysis of biological samples. Research on microchip materials can be mainly categorized into chip materials, channel modifications, electrode materials, and electrode integration methods. Microchip materials research involves the development of silicon, glass, polydimethylsiloxane and polymethyl methacrylate-based, and paper electrophoretic materials. Microchannel modification research primarily focuses on the dynamic and static modification methods of microchannels. Although chip materials and fabrication technologies have improved over the years, problems such as high manufacturing costs, long processing time, and short service lives continue to persist. These problems hinder the industrialization of microchip electrophoresis. At present, few static methods for the surface modification of polymer channels are available, and most of them involve a combination of physical adsorption and polymers. Therefore, developing efficient surface modification methods for polymer channels remains a necessary undertaking. In addition, both dynamic and static modifications require the introduction of other chemicals, which may not be conducive to the expansion of subsequent experiments. The materials commonly used in the development of electrodes and processing methods for electrode-microchip integration include gold, platinum, and silver. Microchip electrophoresis can be divided into two modes according to the uniformity of the electric field: uniform and non-uniform. The uniform electric field electrophoresis mode mainly involves micro free-flow electrophoresis and micro zone electrophoresis, including micro isoelectric focusing electrophoresis, micro isovelocity electrophoresis, and micro density gradient electrophoresis. The non-uniform electric field electrophoresis mode involves micro dielectric electrophoresis. Microchip electrophoresis is typically used in conjunction with conventional laboratory methods, such as optical, electrochemical, and mass spectrometry, to achieve the rapid and efficient separation and analysis of complex samples. However, the labeling required for most widely used laser-induced fluorescence technologies often involves a cumbersome organic synthesis process, and not all samples can be labeled, which limits the application scenarios of laser-induced fluorescence. The applications of unlabeled microchip electrophoresis-chemiluminescence/dielectrophoresis are also limited, and simplification of the experimental process to achieve simple and rapid microchip electrophoresis remains challenging. Several new models and strategies for high throughput in situ detection based on these detection methods have been developed for microchip electrophoretic systems. However, high throughput analysis by microchip electrophoresis is often dependent on complex chip structures and relatively complicated detection methods; thus, simple high throughput analytical technologies must be further explored. This paper also reviews the progress on microchip electrophoresis for the separation and analysis of complex biological samples, such as biomacromolecules, biological small molecules, and bioparticles, and forecasts the development trend of microchip electrophoresis in the separation and analysis of biomolecules. Over 250 research papers on this field are published annually, and it is gradually becoming a research focus. Most previous research has focused on biomacromolecules, including proteins and nucleic acids; biological small molecules, including amino acids, metabolites, and ions; and bioparticles, including cells and pathogens. However, several problems remain unsolved in the field of microchip electrophoresis. Overall, microchip electrophoresis requires further study to increase its suitability for the separation and analysis of complex biological samples.

Immunogenicity and safety of a recombinant adenovirus type-5-vectored COVID-19 vaccine in healthy adults aged 18 years or older: a randomised, double-blind, placebo-controlled, phase 2 trial.

BACKGROUND: This is the first randomised controlled trial for assessment of the immunogenicity and safety of a candidate non-replicating adenovirus type-5 (Ad5)-vectored COVID-19 vaccine, aiming to determine an appropriate dose of the candidate vaccine for an efficacy study. METHODS: This randomised, double-blind, placebo-controlled, phase 2 trial of the Ad5-vectored COVID-19 vaccine was done in a single centre in Wuhan, China. Healthy adults aged 18 years or older, who were HIV-negative and previous severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection-free, were eligible to participate and were randomly assigned to receive the vaccine at a dose of 1 × 1011 viral particles per mL or 5 × 1010 viral particles per mL, or placebo. Investigators allocated participants at a ratio of 2:1:1 to receive a single injection intramuscularly in the arm. The randomisation list (block size 4) was generated by an independent statistician. Participants, investigators, and staff undertaking laboratory analyses were masked to group allocation. The primary endpoints for immunogenicity were the geometric mean titres (GMTs) of specific ELISA antibody responses to the receptor binding domain (RBD) and neutralising antibody responses at day 28. The primary endpoint for safety evaluation was the incidence of adverse reactions within 14 days. All recruited participants who received at least one dose were included in the primary and safety analyses. This study is registered with ClinicalTrials.gov, NCT04341389. FINDINGS: 603 volunteers were recruited and screened for eligibility between April 11 and 16, 2020. 508 eligible participants (50% male; mean age 39·7 years, SD 12·5) consented to participate in the trial and were randomly assigned to receive the vaccine (1 × 1011 viral particles n=253; 5 × 1010 viral particles n=129) or placebo (n=126). In the 1 × 1011 and 5 × 1010 viral particles dose groups, the RBD-specific ELISA antibodies peaked at 656·5 (95% CI 575·2-749·2) and 571·0 (467·6-697·3), with seroconversion rates at 96% (95% CI 93-98) and 97% (92-99), respectively, at day 28. Both doses of the vaccine induced significant neutralising antibody responses to live SARS-CoV-2, with GMTs of 19·5 (95% CI 16·8-22·7) and 18·3 (14·4-23·3) in participants receiving 1 × 1011 and 5 × 1010 viral particles, respectively. Specific interferon γ enzyme-linked immunospot assay responses post vaccination were observed in 227 (90%, 95% CI 85-93) of 253 and 113 (88%, 81-92) of 129 participants in the 1 × 1011 and 5 × 1010 viral particles dose groups, respectively. Solicited adverse reactions were reported by 183 (72%) of 253 and 96 (74%) of 129 participants in the 1 × 1011 and 5 × 1010 viral particles dose groups, respectively. Severe adverse reactions were reported by 24 (9%) participants in the 1 × 1011 viral particles dose group and one (1%) participant in the 5 × 1010 viral particles dose group. No serious adverse reactions were documented. INTERPRETATION: The Ad5-vectored COVID-19 vaccine at 5 × 1010 viral particles is safe, and induced significant immune responses in the majority of recipients after a single immunisation. FUNDING: National Key R&D Programme of China, National Science and Technology Major Project, and CanSino Biologics.

[Expression of human ß-defensin and its relationship with inflammatory factor in human dental pulp tissue].

PURPOSE: To investigate the expression of human ß-defensin(HBD) in human dental pulp tissue and to explore the regulation of HBD in pulp inflammation and the relationship among HBD family members. METHODS: The gene expression of HBD in human dental pulp tissue was assessed in NCBI GEO profiles and was verified by RT-PCR. Human dental pulp cells were stimulated with TNF-α, IL-1α, IL-1ß and IL-6 in different combinations and the expression of HBD2 was analyzed by qPCR. Human dental pulp cells were pretreated with HBD110 and then stimulated with LPS and the expression of TNF-α,IL-1α and HBD2 were analyzed by qPCR. GraphPad Prism 5.01 was used to analyze the results of the experimental and the control groups. RESULTS: 27 HBDs were found to express in human dental pulp tissue in NCBI GEO Profiles. The joint overexpression of TNF-α, IL-1α, IL-1ß and IL-6 increased the expression of HBD2; HBD110 increased the expression of HBD2 by increasing the expression of TNF-α and IL-1α. CONCLUSIONS: Many other HBDs have positive expression in human dental pulp issue besides of HBD1, HBD2, HBD3, HBD4 and the inflammation factors and other HBDs can regulate the expression of HBD2 in dental pulp.

Recent advances on smart TiO2 nanotube platforms for sustainable drug delivery applications.

To address the limitations of traditional drug delivery, TiO2 nanotubes (TNTs) are recognized as a promising material for localized drug delivery systems. With regard to the excellent biocompatibility and physicochemical properties, TNTs prepared by a facile electrochemical anodizing process have been used to fabricate new drug-releasing implants for localized drug delivery. This review discusses the development of TNTs applied in localized drug delivery systems, focusing on several approaches to control drug release, including the regulation of the dimensions of TNTs, modification of internal chemical characteristics, adjusting pore openings by biopolymer coatings, and employing polymeric micelles as drug nanocarriers. Furthermore, rational strategies on external conditions-triggered stimuli-responsive drug release for localized drug delivery systems are highlighted. Finally, the review concludes with the recent advances on TNTs for controlled drug delivery and corresponding prospects in the future.

TiO2 nanotube platforms for smart drug delivery: a review.

Titania nanotube (TNT) arrays are recognized as promising materials for localized drug delivery implants because of their excellent properties and facile preparation process. This review highlights the concept of localized drug delivery systems based on TNTs, considering their outstanding biocompatibility in a series of ex vivo and in vivo studies. Considering the safety of TNT implants in the host body, studies of the biocompatibility present significant importance for the clinical application of TNT implants. Toward smart TNT platforms for sustainable drug delivery, several advanced approaches were presented in this review, including controlled release triggered by temperature, light, radiofrequency magnetism, and ultrasonic stimulation. Moreover, TNT implants used in medical therapy have been demonstrated by various examples including dentistry, orthopedic implants, cardiovascular stents, and so on. Finally, a future perspective of TNTs for clinical applications is provided.

miRNA-135a promotes hepatocellular carcinoma cell migration and invasion by targeting forkhead box O1.

AIMS: Hepatocellular carcinoma (HCC) is the third leading cause of cancer mortality worldwide. Many microRNAs (miRNAs), small non-coding RNAs, are involved in regulating cancer cell proliferation, metastasis, migration, invasion and apoptosis. MAIN METHODS: We investigated the expression of miR-135a in HCC cell lines and clinical tissues. The effect of miR-135a on migration and invasion of HepG2 and MHCC-97L were examined using wound healing and Transwell assay. We determined the expression of miR-135a, forkhead box O1 (FOXO1), matrix metalloproteinase-2 (MMP-2) and Snail using real-time PCR and western blotting. KEY FINDINGS: We found miR-135a was upregulated in HCC cell lines and tissues. miR-135a overexpression promoted HCC cells migration and invasion, whereas miR-135a inhibition suppressed HCC cells migration and invasion. miR-135a overexpression could upregulate the expression of MMP2, Snail and the phosphorylation of AKT, but decreased FOXO3a phosporylation. Tumor suppressor FOXO1 was the direct target for miR-135a. SIGNIFICANCE: Our results suggested that miR-135a might play an important role in promoting migration and invasion in HCC and presents a novel mechanism of miRNA-mediated direct suppression of FOXO1 in HCC cells.

In situ plasmonic Ag nanoparticle anchored TiO2 nanotube arrays as visible-light-driven photocatalysts for enhanced water splitting.

An ultrasonication-assisted in situ deposition strategy was utilised to uniformly decorate plasmonic Ag nanoparticles on vertically aligned TiO2 nanotube arrays (NTAs) to construct a Ag@TiO2 NTA composite. The Ag nanoparticles act as efficient surface plasmon resonance (SPR) photosensitizers to drive photocatalytic water splitting under visible light irradiation. The Ag nanoparticles were uniformly deposited on the surface and inside the highly oriented TiO2 nanotubes. The visible-light-driven hydrogen production activities of silver nanoparticle anchored TiO2 nanotube array photocatalysts were evaluated using methanol as a sacrificial reagent in water under a 500 W Xe lamp with a UV light cutoff filter (λ ≥ 420 nm). It was found that the hydrogen production rate of the Ag@TiO2 NTAs prepared with ultrasonication-assisted deposition for 5 min was approximately 15 times higher than that of its pristine TiO2 NTAs counterpart. The highly efficient photocatalytic hydrogen evolution is attributed to the SPR effect of Ag for enhanced visible light absorption and boosting the photogenerated electron-hole separation/transfer. This strategy is promising for the design and construction of high efficiency TiO2 based photocatalysts for solar energy conversion.

Recent Progress in Fabrication and Applications of Superhydrophobic Coating on Cellulose-Based Substrates.

Multifuntional fabrics with special wettability have attracted a lot of interest in both fundamental research and industry applications over the last two decades. In this review, recent progress of various kinds of approaches and strategies to construct super-antiwetting coating on cellulose-based substrates (fabrics and paper) has been discussed in detail. We focus on the significant applications related to artificial superhydrophobic fabrics with special wettability and controllable adhesion, e.g., oil-water separation, self-cleaning, asymmetric/anisotropic wetting for microfluidic manipulation, air/liquid directional gating, and micro-template for patterning. In addition to the anti-wetting properties and promising applications, particular attention is paid to coating durability and other incorporated functionalities, e.g., air permeability, UV-shielding, photocatalytic self-cleaning, self-healing and patterned antiwetting properties. Finally, the existing difficulties and future prospects of this traditional and developing field are briefly proposed and discussed.

Blastocyst-stage versus cleavage-stage embryo transfer in the first frozen cycles of OHSS-risk patients who deferred from fresh embryo transfer.

Elective cryopreservation of all embryos has been the most effective means to avoid developing ovarian hyperstimulation syndrome (OHSS). However, it is still unknown which stage is optimal for freezing and transferring into uterus in OHSS-risk patients. This study was undertaken to evaluate whether OHSS-risk patients could benefit from transferring blastocysts. A total of 162 women were allocated to cleavage-stage embryo transfer (ET) (group A = 70) and blastocysts transfer (group B = 92) on the basis of patients' voluntary in their first frozen cycles. Although the mean number of transferred embryos in group A was significantly more than those in group B (2.37 ± 0.52 versus 2.11 ± 0.52, p < 0.05), the clinical pregnancy rates, implantation rates and live birth rates in group B were significantly higher than those in group A (47.83% versus 31.43%, p < 0.05; 31.44% versus 18.67%, p < 0.05; 40.21% versus 27.14%, p < 0.05), and the multiple pregnancy rates in both groups were comparable (34.09% versus 36.36%, p > 0.05). The observed results in OHSS-risk population allow us to take a position in favor of blastocyst transfer, thus pregnancy and live birth could be achieved with fewer ETs and in a shorter time frame.

Multifunctional superamphiphobic TiO2 nanostructure surfaces with facile wettability and adhesion engineering.

Compared to conventional top-down photo-cleavage method, a facile bottom-up ink-combination method to in situ and rapidly achieve water wettability and adhesion transition, with a great contrast on the superamphiphobic TiO2 nanostructured film, is described. Moreover, such combination method is suitable for various kinds of superamphiphobic substrate. Oil-based ink covering or removing changes not only the topographical morphology but also surface chemical composition, and these resultant topographical morphology and composition engineering realize the site-selectively switchable wettability varying from superamphiphobicity to amphiphilicity, and water adhesion between sliding superamphiphobicity and sticky superamphiphobicity in micro-scale. Additionally, positive and negative micro-pattern can be achieved by taking advantage of the inherent photocatalytic property of TiO2 with the assistance of anti-UV light ink mask. Finally, the potential applications of the site-selectively sticky superamphiphobic surface were demonstrated. In a proof-of-concept study, the microdroplet manipulation (storage, moving, mixing, and transfer), specific gas sensing, wettability template for positive and negative ZnO patterning, and site-selective cell immobilization have been demonstrated. This study will give an important input to the field of advanced functional material surfaces with special wettability.

Live birth following vitrification of in vitro matured oocytes derived from sibling smaller follicles at follicle selection phase in the context of in vitro fertilization.

In ovarian stimulation, a 31-year-old woman with polycystic ovary syndrome was at the risk of developing ovarian hyperstimulation syndrome, follicle aspiration was performed, and eight immature oocytes were collected from follicle fluids. After 28 h in vitro culture, six of them reached MII and were vitrified. The patient failed to conceive in her fresh in vitro fertilization cycle and next two replacement cycles. In the third replacement cycle, a successful pregnancy was obtained by vitrified-thawed oocytes. This case demonstrates that follicular aspiration during follicle selection phase has protective effects against developing ovarian hyperstimulation syndrome, and rescued immature oocytes are viable and could produce promising embryos for live birth.

Chronic hepatitis B virus infection in women is not associated with IVF/ICSI outcomes.

OBJECTIVE: This study was to evaluate whether chronic HBV (Hepatitis B virus) infection in women is associated with poor performance following IVF/ICSI (in vitro fertilization/intracytoplasmic sperm injection) treatments. MATERIALS AND METHODS: 123 cycles with female chronic HBV infection were compared with 246 cycles with no-infected couples, matched for female age, D3 serum FSH (follicles stimulation hormone) levels, body mass index and assisted reproductive technology approach used (IVF or ICSI), in a ratio of 1:2. RESULTS: The details in IVF/ICSI cycles, including the dosage of gonadotrophin used, the serum estradiol levels and the endometrial thickness on the day of hCG (human chorionic gonadotrophin) injection, the mean number of oocytes retrieved, and the embryology data, were similar among seropositive and seronegative women. And there was no significant differences in implantation rates and live birth rates between seropositive women group and matched control (30.52 versus 28.34% per transfer; 42.28 versus 40.65%). CONCLUSIONS: The results indicated that women with chronic HBV infection is not associated with outcomes of IVF/ICSI treatments.

[Suppression of mitochondrial oxidative phosphorylation on in vitro maturation, fertilization and developmental competence of oocytes].

OBJECTIVE: To investigate the roles of mitochondrial oxidative phosphorylation (OXPHOS) capacity in oocyte maturation, fertilization and embryo development. METHODS: Carbonyl cyanide p- (tri-fluromethoxy) phenyl-hydrazone (FCCP), a metabolic inhibitor of mitochondria, was introduced into culture medium. The integrity of spindle and chromosome alignment, reactive oxygen species (ROS) levels, and rates of maturation, germinal vesicle breakdown, fertilization and blastulation were assessed in vitro. RESULTS: Significant decreases were detected in the percentages of oocytes with nuclear maturation, normal spindle formation and chromosome alignment, ROS levels and capable for blastocyst formation between oocytes treated with FCCP and non-treated (control group), 55.8%, 37.9%, 0.67 and 57.9% (FCCP 10 nmol/L group), 47.3%,34.7%, 0.59 and 41.8% (FCCP 100 nmol/L group) versus 62.9%, 61.9%,0.94 and 68.3% (control group) respectively, P<0.05. However, No significant differences were found in the rates of GVBD and fertilization in oocytes from the FCCP treated and the control. CONCLUSION: Inhibition of mitochondrial metabolic capacity resulted in decreased the percentages of oocytes with nuclear maturation, normal spindle formation and chromosome alignment, ROS levels and capable for blastocyst formation. But the treatment of FCCP did not affect the rate of fertilization.

Bioinspired TiO2 nanostructure films with special wettability and adhesion for droplets manipulation and patterning.

Patterned surfaces with special wettability and adhesion (sliding, sticky or patterned superoleophobic surface) can be found on many living creatures. They offer a versatile platform for microfluidic management and other biological functions. Inspired by their precise arrangement of structure and chemical component, we described a facile one-step approach to construct large scale pinecone-like anatase TiO2 particles (ATP) film. The as-prepared ATP film exhibits excellent superamphiphilic property in air, changes to underwater superoleophobicity with good dynamical stability. In addition, erasable and rewritable patterned superamphiphobic ATP films or three-dimensional (3D) Janus surfaces were constructed for a versatile platform for microfluidic management and biomedical applications. In a proof-of-concept study, robust super-antiwetting feet for artificial anti-oil strider at the oil/water interface, novel superamphiphobic surface for repeatable oil/water separation, and multifunctional patterned superamphiphobic ATP template for cell, fluorecent probe and inorganic nanoparticles site-selective immobilization were demonstrated.

[Feasibility reaserch on using Raman spectroscopy with PLS for the quantitative detection of cholesterol content in serum].

Taking the serum obtained from daily clinical inspection as study object, the Raman spectra were collected with the range of 250 to 2 400 cm(-1). Taking the serum cholesterol content determined by traditional clinical biochemical method as contrast, together with combination of PLS, we established a Raman spectroscopy quantitative models for cholesterol content in serum. The experimental results show that Raman spectroscopy displacement could reflect certain chemical group in organic compound. The correction model of cholesterol content in serum was established with the coefficient R = 0.909 6, cross-validation calibration standard deviation (RMSECV) of 0. 24, standard error of prediction of test set (RMSEP) was 0.69, and coefficient (R) is 0.926 2. The results showed that application of Raman spectroscopy combined with chemometrics in the rapid noninvasive detection of serum cholesterol content is feasible.

[Effects of controlled ovarian hyperstimulation on mitochondria copy number and functions in murine oocytes].

OBJECTIVE: To investigate the effect of whether controlled ovarian hyperstimulation (COH) on mitochondrial DNA (mtDNA) copy number, mitochondrial function, distribution, the level of reactive oxygen species (ROS) in oocytes and the mechanism of oocyte loss in COH. METHODS: Matured murine oocytes were classified into COH group and natural cycles (NC) group. The copies of mtDNA, the magnitude of mitochondrial membrane potential (Δφm) and oocyte adenosine triphosphate (ATP) content, pattern of mitochondrial distribution, and ROS levels were evaluated by realtime PCR, immunofluorescence and fluorescence-luciferase mensuration. RESULTS: The copies of mtDNA, the levels of Δφm, and ATP content in oocytes between COH and NC groups showed statistical difference [(1.15 ± 0.01)×10(5), 0.34 ± 0.03 and (241 ± 20) fmol/oocyte (COH)] versus [(2.15 ± 0.19)×10(5), 0.82 ± 0.07 and (325 ± 11) fmol/oocyte (NC)], respectively(P < 0.05). However, there were no significant differences in the rate of evenly distributed mitochondria and the level of ROS in oocytes from COH and NC [(76.5% (78/102) in COH versus 82.1% (69/84)]; 1.07 ± 0.07 in COH versus 0.93 ± 0.08 in NC (P > 0.05). CONCLUSION: It was indicated that non-physiological COH treatments inhibit mtDNA replication, alter mitochondrial function, which might partly be involved in the low development potential of COH oocyte.

4,5-Bis(4-fluoro-phen-yl)-5-hy-droxy-3-(2-methyl-propano-yl)-1-phenyl-pyrrolidin-2-one.

The title compound, C(26)H(23)F(2)NO(3), was synthesized by the reaction of 2-(4-fluoro-benzyl-idene)-4-methyl-3-oxo-N-phenyl-penta-namide and 4-fluoro-benzaldehyde. The dihedral angles between the mean plane through the pyrrolidine ring (nearly planar; maximum deviation of 0.145 Šfor the C atom bearing the hydroxy group) with the phenyl and benzene rings are 37.22 (7), 51.88 (7) and 87.64 (9)°, respectively. The pyyolidine ring is near coplaner, with max offset of 0.145 A for C19 atom.\uff09 In the crystal, mol-ecules are linked by pairs of O-H⋯O hydrogen bonds into inversion dimers, which are further assembled into chains parallel to the b axis by weak C-H⋯O hydrogen bonds.

Anti-neuroinflammatory and neurotrophic effects of combined therapy with annexin II and Reg-2 on injured spinal cord.

The present study was designed to investigate the neuroprotective effects of Ca(2+)-dependent phospholipid-binding protein annexin II and a secreted protein Reg-2 (regeneration gene protein 2) in spinal cord injury (SCI) model produced by contusion SCI at T(9) using the weight drop method. The agents were delivered intrathecally with Alzet miniosmotic pumps. We found that annexin II and Reg-2 remarkably reduced neuronal death, attenuated tissue damage and alleviated detrimental inflammation in vivo; meanwhile, a significant increase in white matter sparing and myelination area was observed. The propriospinal axons and long-distance supraspinal pathways were protected by the treatments as revealed by retrograde tracing. Basso Beattie Bresnahan locomotor rating scores also revealed a measurable behavioral improvement. However, no evident behavioral improvements in locomotor performance were achieved by the combined treatment with annexin II and Reg-2, compared with the separate treatment with annexin II and Reg-2.

The neuroprotective effects of Reg-2 following spinal cord transection injury.

This study was designed to elucidate the potential neuroprotective effects of Reg-2 (regeneration gene protein 2) in a rodent model of spinal cord transection injury at the ninth thoracic level. Reg-2 at 100 and 500 µg, recombinant rat ciliary neurotrophic factor, or vehicle were delivered intrathecally using Alzet miniosmotic pumps. We found that Reg-2 treatment significantly reduced neuronal death in the spinal cord. There was also an attenuation of inflammation at the injury site and an increase in white matter sparing and retained myelination. Retrograde tracing revealed that Reg-2 protected axons of long descending pathways at 6 weeks post-SCI, and the number of FluoroGold-labeled neurons in spinal and supraspinal regions was also significantly increased. Immunofluorescent staining confirmed that the spared white matter contained neurofilament-positive axons. Moreover, behavioral improvements were revealed by Basso Beattie Bresnahan locomotor rating scores and grid-walk analysis. These results suggest that Reg-2 might promote functional recovery by increasing axonal growth, inhibiting neuronal apoptosis, and attenuating spinal cord secondary injury after SCI.

Nitrogen-doped TiO2 nanotube array films with enhanced photocatalytic activity under various light sources.

Highly ordered nitrogen-doped titanium dioxide (N-doped TiO(2)) nanotube array films with enhanced photocatalytic activity were fabricated by electrochemical anodization, followed by a wet immersion and annealing post-treatment. The morphology, structure and composition of the N-doped TiO(2) nanotube array films were investigated by FESEM, XPS, UV-vis and XRD. The effect of annealing temperature on the morphology, structures, photoelectrochemical property and photo-absorption of the N-doped TiO(2) nanotube array films was investigated. Liquid chromatography and mass spectrometry were applied to the analysis of the intermediates coming from the photocatalytic degradation of MO. The experimental results showed that there were four primary intermediates existing in the photocatalytic reaction. Compared with the pure TiO(2) nanotube array film, the N-doped TiO(2) nanotubes exhibited higher photocatalytic activity in degradating methyl orange into non-toxic inorganic products under both UV and simulated sunlight irradiation.