Integration of Plasmonic Ag(I) Clusters and Fe(II) Porphyrinates into Metal-Organic Frameworks for Efficient Photocatalytic CO2 Reduction Coupling with Photosynthesis of Pure H2O2.

Efficient photocatalytic CO2 reduction coupled with the photosynthesis of pure H2O2 is a challenging and significant task. Herein, using classical CO2 photoreduction site iron porphyrinate as the linker, Ag(I) clusters were spatially separated and evenly distributed within a new metal-organic framework (MOF), namely Ag27TPyP-Fe. With water as electron donors, Ag27TPyP-Fe exhibited remarkable performances in artificial photosynthetic overall reaction with CO yield of 36.5 µmol g-1 h-1 and ca. 100% selectivity, as well as H2O2 evolution rate of 35.9 µmol g-1 h-1. Since H2O2 in the liquid phase can be more readily separated from the gaseous products of CO2 photoreduction, high-purity H2O2 with a concentration up to 0.1 mM was obtained. Confirmed by theoretical calculations and the established energy level diagram, the reductive iron(II) porphyrinates and oxidative Ag(I) clusters within an integrated framework functioned synergistically to achieve artificial photosynthesis. Furthermore, photoluminescence spectroscopy and photoelectrochemical measurements revealed that the robust connection of Ag(I) clusters and iron porphyrinate ligands facilitated efficient charge separation and rapid electron transfer, thereby enhancing the photocatalytic activity.

Highly Efficient Electrosynthesis of Urea from CO2 and Nitrate by a Metal-Organic Framework with Dual Active Sites.

Electrosynthesis of urea from CO2 and NO3- is a sustainable alternative to energy-intensive industrial processes. The challenge hindering the progress is the development of advanced electrocatalysts that yield urea with both high Faradaic efficiency (FE) and current density. In this work, we designed a new two-dimensional MOF, namely PcNi-Fe-O, constructed by nickel-phthalocyanine (NiPc) ligands and square-planar FeO4 nodes. PcNi-Fe-O exhibits remarkable performance to yield urea at a high current density of 10.1 mA cm-2 with a high FE(urea) of 54.1% in a neutral aqueous solution, surpassing those of most reported electrocatalysts. No obvious performance degradation was observed over 20 hours of continuous operation at the current density of 10.1 mA cm-2. By expanding the electrode area to 25 cm2 and operating for 8 hours, we obtained 0.164 g of high-purity urea, underscoring its potential for industrial applications. Mechanism study unveiled the enhanced performance might be ascribed to the synergistic interaction between NiPc and FeO4 sites. Specifically, NH3 produced at the FeO4 site can efficiently migrate and couple with the *NHCOOH intermediate adsorbed on the urea-producing site (NiPc). This synergistic effect results in a lower energy barrier for C-N bond formation than those of the reported catalysts with single active sites.

Efficient Capture and Electroreduction of Dilute CO2 into Highly Pure and Concentrated Formic Acid Aqueous Solution.

High-purity CO2 rather than dilute CO2 (15 vol %, CO2/N2/O2 = 15:80:5, v/v/v) similar to the flue gas is currently used as the feedstock for the electroreduction of CO2, and the liquid products are usually mixed up with the cathode electrolyte, resulting in high product separation costs. In this work, we showed that a microporous conductive Bi-based metal-organic framework (Bi-HHTP, HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) can not only efficiently capture CO2 from the dilute CO2 under high humidity but also catalyze the electroreduction of the adsorbed CO2 into formic acid with a high current density of 80 mA cm-2 and a Faradaic efficiency of 90% at a very low cell voltage of 2.6 V. Importantly, the performance in a dilute CO2 atmosphere was close to that under a high-purity CO2 atmosphere. This is the first catalyst that can maintain exceptional eCO2RR performance in the presence of both O2 and N2. Moreover, by using dilute CO2 as the feedstock, a 1 cm-2 working electrode coating with Bi-HHTP can continuously produce a 200 mM formic acid aqueous solution with a relative purity of 100% for at least 30 h in a membrane electrode assembly (MEA) electrolyzer. The product does not contain electrolytes, and such a highly concentrated and pure formic acid aqueous solution can be directly used as an electrolyte for formic acid fuel cells. Comprehensive studies revealed that such a high performance might be ascribed to the CO2 capture ability of the micropores on Bi-HHTP and the lower Gibbs free energy of formation of the key intermediate *OCHO on the open Bi sites.

Pyrroloquinoline quinone production defines the ability of Devosia species to degrade deoxynivalenol.

Deoxynivalenol (DON) is a prevalent mycotoxin that primarily contaminates cereal crops and animal feed, posing a significant risk to human and animal health. In recent years, an increasing number of Devosia strains have been identified as DON degradation bacteria, and significant efforts have been made to explore their potential applications in the food and animal feed industries. However, the characteristics and mechanisms of DON degradation in Devosia strains are still unclear. In this study, we identified a novel DON degrading bacterium, Devosia sp. D-G15 (D-G15), from soil samples. The major degradation products of DON in D-G15 were 3-keto-DON, 3-epi-DON and an unidentified product, compound C. The cell viability assay showed that the DON degradation product of D-G15 revealed significantly reduced toxicity to HEK293T cells compared to DON. Three enzymes for DON degradation were further identified, with G15-DDH converting DON to 3-keto-DON and G15-AKR1/G15-AKR6 reducing 3-keto-DON to 3-epi-DON. Interestingly, genome comparison of Devosia strains showed that the pyrroloquinoline quinone (PQQ) synthesis gene cluster is a unique feature of DON degradation strains. Subsequently, adding PQQ to the cultural media of Devosia strains without PQQ synthesis genes endowed them with DON degradation activity. Furthermore, a novel DON-degrading enzyme G13-DDH (<30% homology with known DON dehydrogenase) was identified from a Devosia strain that lacks PQQ synthesis ability. In summary, a novel DON degrading Devosia strain and its key enzymes were identified, and PQQ production was found as a distinct feature among Devosia strains with DON degradation activity, which is important for developing Devosia strain-based technology in DON detoxification.

Utilisation of carbon dioxide and nitrate for urea electrosynthesis with a Cu-based metal-organic framework.

It is important and challenging to utilise CO2 and NO3- as a feedstock for electrosynthesis of urea. Herein, we reported a stable 2D metal-organic framework (MOF) Cu-HATNA, possessing planar CuO4 active sites, as an efficient electrocatalyst for coupling CO2 and NO3- into urea, achieving a high yield rate of 1.46 g h-1 gcat-1 with a current density of 44.2 mA cm-1 at -0.6 V vs. RHE. This performance surpasses most of the previously reported catalysts, revealing the great prospects of MOFs in sustainable urea synthesis.

Continuously Producing Highly Concentrated and Pure Acetic Acid Aqueous Solution via Direct Electroreduction of CO2.

It is crucial to achieve continuous production of highly concentrated and pure C2 chemicals through the electrochemical CO2 reduction reaction (eCO2RR) for artificial carbon cycling, yet it has remained unattainable until now. Despite one-pot tandem catalysis (dividing the eCO2RR to C2 into two catalytical reactions of CO2 to CO and CO to C2) offering the potential for significantly enhancing reaction efficiency, its mechanism remains unclear and its performance is unsatisfactory. Herein, we selected different CO2-to-CO catalysts and CO-to-acetate catalysts to construct several tandem catalytic systems for the eCO2RR to acetic acid. Among them, a tandem catalytic system comprising a covalent organic framework (PcNi-DMTP) and a metal-organic framework (MAF-2) as CO2-to-CO and CO-to-acetate catalysts, respectively, exhibited a faradaic efficiency of 51.2% with a current density of 410 mA cm-2 and an ultrahigh acetate yield rate of 2.72 mmol m-2 s-1 under neutral conditions. After electrolysis for 200 h, 1 cm-2 working electrode can continuously produce 20 mM acetic acid aqueous solution with a relative purity of 95+%. Comprehensive studies revealed that the performance of tandem catalysts is influenced not only by the CO supply-demand relationship and electron competition between the two catalytic processes in the one-pot tandem system but also by the performance of the CO-to-C2 catalyst under diluted CO conditions.

Highly Efficient Electroreduction of CO2 to Ethanol via Asymmetric C-C Coupling by a Metal-Organic Framework with Heterodimetal Dual Sites.

The electroreduction of CO2 into value-added liquid fuels holds great promise for addressing global environmental and energy challenges. However, achieving highly selective yielding of multi-carbon oxygenates through the electrochemical CO2 reduction reaction (eCO2RR) is a formidable task, primarily due to the sluggish asymmetric C-C coupling reaction. In this study, a novel metal-organic framework (CuSn-HAB) with unprecedented heterometallic Sn···Cu dual sites (namely, a pair of SnN2O2 and CuN4 sites bridged by µ-N atoms) was designed to overcome this limitation. CuSn-HAB demonstrated an impressive Faradic efficiency (FE) of 56(2)% for eCO2RR to alcohols, achieving a current density of 68 mA cm-2 at a low potential of -0.57 V (vs RHE). Notably, no significant degradation was observed over a continuous 35 h operation at the specified current density. Mechanistic investigations revealed that, in comparison to the copper site, the SnN2O2 site exhibits a higher affinity for oxygen atoms. This enhanced affinity plays a pivotal role in facilitating the generation of the key intermediate *OCH2. Consequently, compared to homometallic Cu···Cu dual sites (generally yielding ethylene product), the heterometallic dual sites were proved to be more thermodynamically favorable for the asymmetric C-C coupling between *CO and *OCH2, leading to the formation of the key intermediate *CO-*OCH2, which is favorable for yielding ethanol product.

Simultaneous Capture of CO2 Boosting Its Electroreduction in the Micropores of a Metal-organic Framework.

Integration of CO2 capture capability from simulated flue gas and electrochemical CO2 reduction reaction (eCO2 RR) active sites into a catalyst is a promising cost-effective strategy for carbon neutrality, but is of great difficulty. Herein, combining the mixed gas breakthrough experiments and eCO2 RR tests, we showed that an Ag12 cluster-based metal-organic framework (1-NH2 , aka Ag12 bpy-NH2 ), simultaneously possessing CO2 capture sites as "CO2 relays" and eCO2 RR active sites, can not only utilize its micropores to efficiently capture CO2 from simulated flue gas (CO2 : N2 =15 : 85, at 298 K), but also catalyze eCO2 RR of the adsorbed CO2 into CO with an ultra-high CO2 conversion of 60 %. More importantly, its eCO2 RR performance (a Faradaic efficiency (CO) of 96 % with a commercial current density of 120 mA cm-2 at a very low cell voltage of -2.3 V for 300 hours and the full-cell energy conversion efficiency of 56 %) under simulated flue gas atmosphere is close to that under 100 % CO2 atmosphere, and higher than those of all reported catalysts at higher potentials under 100 % CO2 atmosphere. This work bridges the gap between CO2 enrichment/capture and eCO2 RR.

Self-Accelerating Effect in a Covalent-Organic Framework with Imidazole Groups Boosts Electroreduction of CO2 to CO.

Solvent effect plays an important role in catalytic reaction, but there is little research and attention on it in electrochemical CO2 reduction reaction (eCO2 RR). Herein, we report a stable covalent-organic framework (denoted as PcNi-im) with imidazole groups as a new electrocatalyst for eCO2 RR to CO. Interestingly, compared with neutral conditions, PcNi-im not only showed high Faraday efficiency of CO product (≈100 %) under acidic conditions (pH ≈ 1), but also the partial current density was increased from 258 to 320 mA cm-2 . No obvious degradation was observed over 10 hours of continuous operation at the current density of 250 mA cm-2 . The mechanism study shows that the imidazole group on the framework can be protonated to form an imidazole cation in acidic media, hence reducing the surface work function and charge density of the active metal center. As a result, CO poisoning effect is weakened and the key intermediate *COOH is also stabilized, thus accelerating the catalytic reaction rate.

Improvement of catalytic activity of sorbose dehydrogenase for deoxynivalenol degradation by rational design.

Deoxynivalenol (DON) is the most frequently contaminated mycotoxin in food and feed worldwide, causing significant economic losses and health risks. Physical and chemical detoxification methods are widely used, but they cannot efficiently and specifically remove DON. In the study, the combination of bioinformatics screening and experimental verification confirmed that sorbose dehydrogenase (SDH) can effectively convert DON to 3-keto-DON and a substance that removes four hydrogen atoms for DON. Through rational design, the Vmax of the mutants F103L and F103A were increased by 5 and 23 times, respectively. Furthermore, we identified catalytic sites W218 and D281. SDH and its mutants have broad application conditions, including temperature ranges of 10-45 °C and pH levels of 4-9. Additionally, the half-lives of F103A at 90 °C (processing temperature) and 30 °C (storage temperature) were 60.1 min and 100.5 d, respectively. These results suggest that F103A has significant potential in the detoxification application of DON.

Precise Engineering of a Se/Te Nanochaperone for Reinvigorating Cancer Radio-Immunotherapy.

Facilely synthesized nanoradiosensitizers with well-controlled structure and multifunctionality are greatly desired to address the challenges of cancer radiotherapy. In this work, a universal method is developed for synthesizing chalcogen-based TeSe nano-heterojunctions (NHJs) with rod-, spindle-, or dumbbell-like morphologies by engineering the surfactant and added selenite. Interestingly, dumbbell-shaped TeSe NHJs (TeSe NDs) as chaperone exhibit better radio-sensitizing activities than the other two nanostructural shapes. Meanwhile, TeSe NDs can serve as cytotoxic chemodrugs that degrade to highly toxic metabolites in acidic environment and deplete GSH within tumor to facilitate radiotherapy. More importantly, the combination of TeSe NDs with radiotherapy significantly decreases regulatory T cells and M2-phenotype tumor-associated macrophage infiltrations within tumors to reshape the immunosuppressive microenvironment and induce robust T lymphocytes-mediated antitumor immunity, resulting in great abscopal effects on combating distant tumor progression. This study provides a universal method for preparing NHJ with well-controlled structure and developing nanoradiosensitizers to overcome the clinical challenges of cancer radiotherapy.

Cyclic Trinickel(II) Clusters in a Metal-Azolate Framework for Efficient Overall Water Splitting.

Herein, a stable metal-azolate framework with cyclic trinickel(II) clusters, namely [Ni3 (µ3 -O)(BTPP)(OH)(H2 O)2 ] (Ni-BTPP, H3 BTPP=1,3,5-tris((1H-pyrazol-4-yl)phenylene)benzene), achieved a current density of 50 mA cm-2 at a cell voltage of 1.8 V in 1.0 M KOH solution, while the current density of 20%Pt/C@NF||IrO2 @NF is just 35.8 mA cm-2 at 2.0 V under the same condition. Moreover, no obvious degradation was observed over 12 hours of continuous operation at a large current density of 50 mA cm-2 . Theoretical calculations revealed that the µ3 -O atom in the cyclic trinickel(II) cluster serves as hydrogen-bonding acceptor to facilitate the dissociation of a H2 O molecule adsorbed on the adjacent Ni(II) ion, giving a lower energy barrier of H2 O dissociation compared with Pt/C; meanwhile, the µ3 -O atom can also participate in the water oxidation reaction to couple with the adjacent *OH adsorbed on Ni(II) ion, providing a low-energy coupling pathway, thus Ni-BTPP achieves a high performance for overall water splitting.

Real-Time Forest Fire Detection by Ensemble Lightweight YOLOX-L and Defogging Method.

Forest fires can destroy forest and inflict great damage to the ecosystem. Fortunately, forest fire detection with video has achieved remarkable results in enabling timely and accurate fire warnings. However, the traditional forest fire detection method relies heavily on artificially designed features; CNN-based methods require a large number of parameters. In addition, forest fire detection is easily disturbed by fog. To solve these issues, a lightweight YOLOX-L and defogging algorithm-based forest fire detection method, GXLD, is proposed. GXLD uses the dark channel prior to defog the image to obtain a fog-free image. After the lightweight improvement of YOLOX-L by GhostNet, depth separable convolution, and SENet, we obtain the YOLOX-L-Light and use it to detect the forest fire in the fog-free image. To evaluate the performance of YOLOX-L-Light and GXLD, mean average precision (mAP) was used to evaluate the detection accuracy, and network parameters were used to evaluate the lightweight effect. Experiments on our forest fire dataset show that the number of the parameters of YOLOX-L-Light decreased by 92.6%, and the mAP increased by 1.96%. The mAP of GXLD is 87.47%, which is 2.46% higher than that of YOLOX-L; and the average fps of GXLD is 26.33 when the input image size is 1280 × 720. Even in a foggy environment, the GXLD can detect a forest fire in real time with a high accuracy, target confidence, and target integrity. This research proposes a lightweight forest fire detection method (GXLD) with fog removal. Therefore, GXLD can detect a forest fire with a high accuracy in real time. The proposed GXLD has the advantages of defogging, a high target confidence, and a high target integrity, which makes it more suitable for the development of a modern forest fire video detection system.

Isolated Tin(IV) Active Sites for Highly Efficient Electroreduction of CO2 to CH4 in Neutral Aqueous Solution.

The development of efficient electrocatalysts with non-copper metal sites for electrochemical CO2 reduction reactions (eCO2 RR) to hydrocarbons and oxygenates is highly desirable, but still a great challenge. Herein, a stable metal-organic framework (DMA)4 [Sn2 (THO)2 ] (Sn-THO, THO6- = triphenylene-2,3,6,7,10,11-hexakis(olate), DMA = dimethylammonium) with isolated and distorted octahedral SnO6 2- active sites is reported as an electrocatalyst for eCO2 RR, showing an exceptional performance for eCO2 RR to the CH4 product rather than the common products formate and CO for reported Sn-based catalysts. The partial current density of CH4 reaches a high value of 34.5 mA cm-2 , surpassing most reported copper-based and all non-Cu metal-based catalysts. Our experimental and theoretical results revealed that the isolated SnO6 2- active site favors the formation of key *OCOH species to produce CH4 and can greatly inhibit the formation of *OCHO and *COOH species to produce *HCOOH and *CO, respectively.

Synergistic Effect in a Metal-Organic Framework Boosting the Electrochemical CO2 Overall Splitting.

It is a very important but still challenging task to develop bifunctional electrocatalysts for highly efficient CO2 overall splitting. Herein, we report a stable metal-organic framework (denoted as PcNi-Co-O), composed of (2,3,9,10,16,17,23,24-octahydroxyphthalocyaninato)nickel(II) (PcNi-(O-)8) ligands and the planar CoO4 nodes, for CO2 overall splitting. When working as both cathode and anode catalysts (i.e., PcNi-Co-O||PcNi-Co-O), PcNi-Co-O achieved a commercial-scale current density of 123 mA cm-2 (much higher than the reported values (0.2-12 mA cm-2)) with a Faradic efficiency (CO) of 98% at a low cell voltage of 4.4 V. Mechanism studies suggested the synergistic effects between two active sites, namely, (i) electron transfer from CoO4 to PcNi sites under electric fields, resulting in the raised oxidizability/reducibility of CoO4/PcNi sites, respectively; (ii) the energy-level matching of cathode and anode catalysts can reduce the energy barrier of electron transfer between them and improve the performance of CO2 overall splitting.

Rational Design of Metal-Organic Frameworks for Electroreduction of CO2 to Hydrocarbons and Carbon Oxygenates.

Since CO2 can be reutilized by using renewable electricity in form of product diversity, electrochemical CO2 reduction (ECR) is expected to be a burgeoning strategy to tackle environmental problems and the energy crisis. Nevertheless, owing to the limited selectivity and reaction efficiency for a single component product, ECR is still far from a large-scale application. Therefore, designing high performance electrocatalysts is the key objective in CO2 conversion and utilization. Unlike most other types of electrocatalysts, metal-organic frameworks (MOFs) have clear, designable, and tunable catalytic active sites and chemical microenvironments, which are highly conducive to establish a clear structure-performance relationship and guide the further design of high-performance electrocatalysts. This Outlook concisely and critically discusses the rational design strategies of MOF catalysts for ECR in terms of reaction selectivity, current density, and catalyst stability, and outlines the prospects for the development of MOF electrocatalysts and industrial applications. In the future, more efforts should be devoted to designing MOF structures with high stability and electronic conductivity besides high activity and selectivity, as well as to develop efficient electrolytic devices suitable for MOF catalysts.

Correction: Selenium-driven enhancement of synergistic cancer chemo-/radiotherapy by targeting nanotherapeutics.

Correction for 'Selenium-driven enhancement of synergistic cancer chemo-/radiotherapy by targeting nanotherapeutics' by Xinxin Liu et al., Biomater. Sci., 2021, 9, 4691-4700, https://doi.org/10.1039/d1bm00348h.

Single-Product Faradaic Efficiency for Electrocatalytic of CO2 to CO at Current Density Larger than 1.2†A cm-2 in Neutral Aqueous Solution by a Single-Atom Nanozyme.

Electroreduction of CO2 to CO is a promising approach for the cycling use of CO2 , while it still suffers from impractical current density and durability. Here we report a single-atom nanozyme (Ni-N5 -C) that achieves industrial-scale performance for CO2 -to-CO conversion with a Faradaic efficiency (FE) exceeded 97 % over -0.8--2.4 V vs. RHE. The current density at -2.4 V vs. RHE reached a maximum of 1.23 A cm-2 (turnover frequency of 69.7 s-1 ) with an FE of 99.6 %. No obvious degradation was observed over 100 hours of continuous operation. Compared with the planar Ni-N4 site, the square-pyramidal Ni-N5 site has an increase and a decrease in the d z 2 ${{{\rm d}}_{{z}^{2}}}$ and dxz/yz orbital energy levels, respectively, as revealed by density functional theory calculations. Thus, the Ni-N5 catalytic site is more superior to activate CO2 molecule and reduce the energy barriers as well as promote the CO desorption, thus boosting the kinetic activation process and catalytic activity.

A Stable and Conductive Covalent Organic Framework with Isolated Active Sites for Highly Selective Electroreduction of Carbon Dioxide to Acetate.

Electroreduction of CO2 to acetate provides a promising strategy to reduce CO2 emissions and store renewable energy, but acetate is usually a by-product. Here, we show a stable and conductive two-dimensional phthalocyanine-based covalent-organic framework (COF) as an electrocatalyst for reduction of CO2 to acetate with a single-product Faradaic efficiency (FE) of 90.3(2)% at -0.8 V (vs. RHE) and a current density of 12.5 mA cm-2 in 0.1 M KHCO3 solution. No obvious degradation was observed over 80 hours of continuous operation. Combined with the comparison of the properties of other catalysts with isolated metal active sites, theoretical calculations and in situ infrared spectroscopy revealed that the isolated copper-phthalocyanine active site with high electron density is conducive to the key step of C-C coupling of *CH3 with CO2 to produce acetate, and can avoid the coupling of *CO with *CO or *CHO to produce ethylene and ethanol.

In situ-transition nanozyme triggered by tumor microenvironment boosts synergistic cancer radio-/chemotherapy through disrupting redox homeostasis.

Disrupting redox homeostasis in the tumor microenvironment (TME), like excessive H2O2, glutathione (GSH) and weak acidity, has been proved as an effective tumor therapeutic strategy. Herein, we constructed a TME-responsive nanozyme, DOX@HMSN/Mn3O4(R), with reversible Mn3+/Mn2+ transition in situ triggered by TME to perturb the intrinsic redox homeostasis and catalyze reactive oxygen species (ROS) overproduction. In addition, this nanozyme could react with excess GSH in TME to produce GSSG, resulting in the consumption of reducing agents to suppress ROS clearance. Density functional theory calculations further confirmed that the nanozyme mainly exhibited the oxidase-like activity to catalyze the formation of hydroxyl radicals from O2, thus strengthening the oxidation environment in the TME. Combined with radiotherapy, the high-energy X-ray could excite the outer-layer electrons in the nanozyme, forming photoelectrons that participate in the oxidase-like enzymatic reaction, thus intensifying ROS accumulation and amplifying the radio-/chemotherapeutic efficacy.