Variation in isocentre location of an Elekta Unity MR-linac through full gantry rotation.

Objective. The objective of this study was to separately quantify the stability of the megavoltage imager (MVI) and radiation head of an Elekta Unity MRL, throughout full gantry rotation.Approach. A ball-bearing (BB) phantom was attached to the radiation head of the Unity, while a single BB was placed at isocentre. Images were acquired during rotation, using the MVI. These images were processed using an in-house developed MATLAB program to reduce the errors resulted by noise, and the positions of the BBs in the images were analysed to extract MVI and radiation head sag data.Main results. The results returned by this method showed reproducibility, with a mean standard deviation of 7µm for the position of BBs across all gantry angles. The radiation head was found to sag throughout rotation, with a maximum course of movement of 0.59 mm. The sag pattern was stable over a period greater than a year but showed some dependence on gantry rotation direction.Significance. As MRL is a relatively new system, it is promising to have data supporting the high level of precision on one Elekta Unity machine. Isolating and quantifying the sources of uncertainty in radiation delivery may allow more sophisticated analysis of how the system performance may be improved.

Exploiting genotype × management interactions to increase rainfed crop production: a case study from south-eastern Australia.

Crop yield must increase to keep pace with growing global demand. Past increases in crop production have rarely been attributable to an individual innovation but have occurred when technologies and practices combine to form improved farming systems. Inevitably this has involved synergy between genotypic and management improvements. We argue that research focused on developing synergistic systems that overcome clear production constraints will accelerate increases in yield. This offers the opportunity to better focus and multiply the impact of discipline-focused research. Here we use the rainfed grain production systems of south-eastern Australia as a case study of how transformational change in water productivity can be achieved with research focused on genotype × management synergies. In this region, rainfall is low and variable and has declined since 1990. Despite this, growers have maintained yields by implementing synergistic systems combining innovations in (i) soil water conservation, (ii) crop diversity, (iii) earlier sowing, and (iv) matching nitrogen fertilizer to water-limited demand. Further increases are emerging from synergies between genetic improvements to deliver flowering time stability, adjusted sowing times, and potential dual-purpose use. Collaboration between agronomists, physiologists, and crop breeders has led to development of commercial genotypes with stable flowering time that are in early phases of testing and adoption.

Toward a Better Understanding of Genotype × Environment × Management Interactions-A Global Wheat Initiative Agronomic Research Strategy.

The Wheat Initiative (WI) and the WI Expert Working Group (EWG) for Agronomy (www.wheatinitiative.org) were formed with a collective goal to "coordinate global wheat research efforts to increase wheat production, quality, and sustainability to advance food security and safety under changing climate conditions." The Agronomy EWG is responsive to the WI's research need, "A knowledge exchange strategy to ensure uptake of innovations on farm and to update scientists on changing field realities." The Agronomy EWG aims to consolidate global expertise for agronomy with a focus on wheat production systems. The overarching approach is to develop and adopt a systems-agronomy framework relevant to any wheat production system. It first establishes the scale of current yield gaps, identifies defensible benchmarks, and takes a holistic approach to understand and overcome exploitable yield gaps to complement genetic increases in potential yield. New opportunities to increase productivity will be sought by exploiting future Genotype × Environment × Management synergies in different wheat systems. To identify research gaps and opportunities for collaboration among different wheat producing regions, the EWG compiled a comprehensive database of currently funded wheat agronomy research (n = 782) in countries representing a large proportion of the wheat grown in the world. The yield gap analysis and research database positions the EWG to influence priorities for wheat agronomy research in member countries that would facilitate collaborations, minimize duplication, and maximize the global impact on wheat production systems. This paper outlines a vision for a global WI agronomic research strategy and discusses activities to date. The focus of the WI-EWG is to transform the agronomic research approach in wheat cropping systems, which will be applicable to other crop species.

Agroecological Advantages of Early-Sown Winter Wheat in Semi-Arid Environments: A Comparative Case Study From Southern Australia and Pacific Northwest United States.

Wheat (Triticum aestivum L.) is the most widely-grown crop in the Mediterranean semi-arid (150-400 mm) cropping zones of both southern Australia and the inland Pacific Northwest (PNW) of the United States of America (United States). Low precipitation, low winter temperatures and heat and drought conditions during late spring and summer limit wheat yields in both regions. Due to rising temperatures, reduced autumn rainfall and increased frost risk in southern Australia since 1990, cropping conditions in these two environments have grown increasingly similar. This presents the opportunity for southern Australian growers to learn from the experiences of their PNW counterparts. Wheat cultivars with an obligate vernalization requirement (winter wheat), are an integral part of semi-arid PNW cropping systems, but in Australia are most frequently grown in cool or cold temperate cropping zones that receive high rainfall (>500 mm p.a.). It has recently been shown that early-sown winter wheat cultivars can increase water-limited potential yield in semi-arid southern Australia, in the face of decreasing autumn rainfall. Despite this research, there has to date been little breeding effort invested in winter wheat for growers in semi-arid southern Australia, and agronomic research into the management of early-sown winter wheat has only occurred in recent years. This paper explores the current and emerging environmental constraints of cropping in semi-arid southern Australia and, using the genotype × management strategies developed over 120 years of winter wheat agronomy in the PNW, highlights the potential advantages early-sown winter wheat offers growers in low-rainfall environments. The increased biomass, stable flowering time and late-summer establishment opportunities offered by winter wheat genotypes ensure they achieve higher yields in the PNW compared to later-sown spring wheat. Traits that make winter wheat advantageous in the PNW may also contribute to increased yield when grown in semi-arid southern Australia. This paper investigates which specific traits present in winter wheat genotypes give them an advantage in semi-arid cropping environments, which management practices best exploit this advantage, and what potential improvements can be made to cultivars for semi-arid southern Australia based on the history of winter wheat crop growth in the semi-arid Pacific Northwest.

Deep Soil Water-Use Determines the Yield Benefit of Long-Cycle Wheat.

Wheat production in southern Australia is reliant on autumn (April-May) rainfall to germinate seeds and allow timely establishment. Reliance on autumn rainfall can be removed by sowing earlier than currently practiced and using late summer and early autumn rainfall to establish crops, but this requires slower developing cultivars to match life-cycle to seasonal conditions. While slow-developing wheat cultivars sown early in the sowing window (long-cycle), have in some cases increased yield in comparison to the more commonly grown fast-developing cultivars sown later (short-cycle), the yield response is variable between environments. In irrigated wheat in the sub-tropics, the variable response has been linked to ability to withstand water stress, but the mechanism behind this is unknown. We compared short- vs. long-cycle cultivars × time of sowing combinations over four seasons (2011, 2012, 2015, and 2016) at Temora, NSW, Australia. Two seasons (2011 and 2012) had above average summer fallow (December-March) rain, and two seasons had below average summer fallow rain (2015 and 2016). Initial plant available water in each season was 104, 91, 28, and 27 mm, respectively. Rainfall in the 30 days prior to flowering (approximating the critical period for yield determination) in each year was 8, 6, 14, and 190 mm, respectively. We only observed a yield benefit in long-cycle treatments in 2011 and 2012 seasons where there was (i) soil water stored at depth (ii) little rain during the critical period. The higher yield of long-cycle treatments could be attributed to greater deep soil water extraction (<1.0 m), dry-matter production and grain number. In 2015, there was little rain during the critical period, no water stored at depth and no difference between treatments. In 2016, high in-crop rainfall filled the soil profile, but high rainfall during the critical period removed crop reliance on deep water, and yields were equivalent. A simulation study extended our findings to demonstrate a median yield benefit in long-cycle treatments when the volume of starting soil water was increased. This work reveals environmental conditions that can be used to quantify the frequency of circumstances where long-cycle wheat will provide a yield advantage over current practice.

Phenology and related traits for wheat adaptation.

Wheat is a major food crop, with around 765 million tonnes produced globally. The largest wheat producers include the European Union, China, India, Russia, United States, Canada, Pakistan, Australia, Ukraine and Argentina. Cultivation of wheat across such diverse global environments with variation in climate, biotic and abiotic stresses, requires cultivars adapted to a range of growing conditions. One intrinsic way that wheat achieves adaptation is through variation in phenology (seasonal timing of the lifecycle) and related traits (e.g., those affecting plant architecture). It is important to understand the genes that underlie this variation, and how they interact with each other, other traits and the growing environment. This review summarises the current understanding of phenology and developmental traits that adapt wheat to different environments. Examples are provided to illustrate how different combinations of alleles can facilitate breeding of wheat varieties with optimal crop performance for different growing regions or farming systems.

Noninvasive 3D Field Mapping of Complex Static Electric Fields.

Many upcoming experiments in antimatter research require low-energy antiproton beams. With a kinetic energy in the order of 100 keV, the standard magnetic components to control and focus the beams become less effective. Therefore, electrostatic components are being developed and installed in transfer lines and storage rings. However, there is no equipment available to precisely map and check the electric field generated by these elements. Instead, one has to trust in simulations and, therefore, depend on tight fabrication tolerances. Here we present, for the first time, a noninvasive way to experimentally probe the electrostatic field in a 3D volume with a microsensor. Using the example of an electrostatic quadrupole focusing component, we find excellent agreement between a simulated and real field. Furthermore, it is shown that the spatial resolution of the probe is limited by the electric field curvature which is almost zero for the quadrupole. With a sensor resolution of 61 V/m/sqrt[Hz], the field deviation due to a noncompliance with the tolerances can be resolved. We anticipate that this compact and practical field strength probe will be relevant also for other scientific and technological disciplines such as atmospheric electricity or safeguarding near power infrastructure.

Increase in coleoptile length and establishment by Lcol-A1, a genetic locus with major effect in wheat.

BACKGROUND: Good establishment is important for rapid leaf area development in wheat crops. Poor establishment results in fewer, later-emerging plants, reduced leaf area and tiller number. In addition, poorly established crops suffer from increased soil moisture loss through evaporation and greater competition from weeds while fewer spikes are produced which can reduce grain yield. By protecting the emerging first leaf, the coleoptile is critical for achieving good establishment, and its length and interaction with soil physical properties determine the ability of a cultivar to emerge from depth. RESULTS: Here we characterise a locus on chromosome 1AS, that increases coleoptile length in wheat, which we designate as Lcol-A1. We identified Lcol-A1 by bulked-segregant analysis and used a Halberd-derived population to fine map the gene to a 2 cM region, equivalent to 7 Mb on the IWGSC genome reference sequence of Chinese Spring (RefSeqv1.0). By sowing recently released cultivars and near-isogenic lines in the field at both conventional and deep sowing depths, we confirmed that Locl-A1 was associated with increased emergence from depth in the presence and absence of conventional dwarfing genes. Flanking markers IWB58229 and IWA710 were developed to assist breeders to select for long coleoptile wheats. CONCLUSIONS: Increased coleoptile length is sought in many global wheat production areas to improve crop emergence. The identification of the gene Lcol-A1, together with tools to allow wheat breeders to track the gene, will enable improvements to be made for this important trait.

Clinical measurements performed during alfaxalone total intravenous anaesthesia for radiography and neurophysiological investigations in dogs.

OBJECTIVE: To describe clinically relevant, physiological measurements collected during a 3 hour duration of alfaxalone total intravenous anaesthesia. STUDY DESIGN: Case series. ANIMALS: A total of 112 client-owned middle-aged or older dogs. METHODS: Dogs were premedicated with intramuscular acepromazine (0.03 mg kg-1). Anaesthesia was induced and subsequently maintained for up to 3 hours with alfaxalone administered intravenously. Dogs breathed 100% oxygen via an endotracheal tube. Heart rate, respiratory rate and blood pressure were evaluated 30 minutes after administration of acepromazine and used as baseline values for comparisons of intra-anaesthetic data. Blood glucose was measured 1 week prior to anaesthesia and every hour during alfaxalone anaesthesia. Quality and duration of recovery were recorded. Mean data for physiological variables were compared over three time points-before induction of anaesthesia, for the first hour of anaesthesia and from 60 minutes to discontinuation of anaesthesia. RESULTS: Mean induction dose of alfaxalone was 1.4 mg kg-1 [95% confidence interval (CI) 1.3-1.5). Post induction apnoea for >60 seconds occurred in 13 (11.6%) dogs. Mean alfaxalone infusion rate during the first 60 minutes of anaesthesia was 0.099 mg kg-1 minute-1; mean infusion rate was 0.092 mg kg-1 minute-1 from 60 minutes until discontinuation of anaesthesia. Heart rate was well maintained; hypotension (mean arterial blood pressure < 60 mmHg) was encountered in 23 (21%) dogs. Blood glucose levels did not alter during anaesthesia. Median time between discontinuation of alfaxalone infusion and extubation was 17 (7-35 minutes), time to assuming sternal recumbency was 75 (58-110 minutes), and time to standing was 109 (88-140 minutes). CONCLUSIONS AND CLINICAL RELEVANCE: Alfaxalone infusion provided effective anaesthesia in this population. In a minority of cases, respiratory and haemodynamic support of the patient was required.

Electrophysiological characterisation of central sensitisation in canine spontaneous osteoarthritis.

In man, central sensitisation (CS) contributes to the pain of osteoarthritis (OA). Dogs with spontaneous OA may also exhibit CS. Electrophysiological reflex measurements are more objective than behavioural assessments and can be used to evaluate CS in preclinical and clinical studies. It was hypothesised that dogs suffering from OA would exhibit electrophysiological characteristics indicative of CS, associated with reduced diffuse noxious inhibitory controls (DNICs). One hundred and seventeen client-owned dogs were recruited to the study. Hind limb nociceptive withdrawal reflex thresholds, stimulus response, and temporal summation characteristics were recorded, during alfaxalone anaesthesia, from 46 OA dogs, 29 OA dogs receiving nonsteroidal anti-inflammatory drugs (OANSAIDs), and 27 breed- and weight-matched control dogs. Efficacy of DNIC was evaluated in 12 control and 11 of the OA dogs, by application of a mechanical conditioning stimulus to the contralateral forelimb. Nociceptive withdrawal reflex thresholds were higher in OA compared with control dogs (P = 0.02). Stimulus response characteristics demonstrated an augmented response in OANSAID dogs compared with OA (P < 0.001) and control (P < 0.001) dogs. Temporal summation demonstrated exaggerated C-fibre-mediated responses in both OA (P < 0.001) and OANSAID (P = 0.005) groups, compared with control animals. Conditioning stimulus application resulted in inhibition of test reflex responses in both OA and control animals (P < 0.001); control animals demonstrated greater inhibition compared with OA (P = 0.0499). These data provide evidence of neurophysiological changes consistent with CS in dogs with spontaneous OA and demonstrate that canine OA is associated with reduced DNIC.

Modeling fine particle dynamics in gravel-bedded streams: Storage and re-suspension of fine particles.

Fine particles or sediments have various effects on water quality and aquatic ecosystems. Thus, understanding the dynamics of these fine particles between water body and stream bed is an important issue in sediment research. Previous studies and analysis of empirical data suggest that fine particles are stored in the sediment bed in the low flow regime, where flow rate is smaller than the critical flow rate that mobilizes the sediment bed. These fine particles are re-suspended during flood events when the flow rate becomes larger than the critical flow rate that mobilizes bed material. The transition from pattern recognition to process analysis required incorporation of the dominant processes controlling fine particle dynamics within gravel-bedded streams into a model. The process analysis was performed using continuous flow and turbidity data at two locations on the Russian River in California to test process descriptions and then calibrate a quantitative model to represent those processes. The resulting process model coupled fine particle retention within the sediment bed by filtration and sedimentation with the release of accumulated fine particles in response to flood events. Model parameters, such as the critical flow rate required for initiating sediment bed fluidization, the maximum fine particle storage capacity within the sediment bed, and background particle concentration for the watershed, were estimated from the monitoring data. Model calibration optimized the filtration and the sediment bed fluidization parameters over two or three years of data. Overall, the difference between modeled and observed fine particle mass released from the sediment bed was within 20% of the measured mass.

An analysis of the relative frequencies of reported adverse events associated with NSAID administration in dogs and cats in the United Kingdom.

This study aimed to analyse UK pharmacovigilance data to quantify adverse events (AEs) associated with the non-steroidal anti-inflammatory drug (NSAID) molecules found in veterinary medicines authorised for use in dogs and cats. It was hypothesised that the frequency of AEs would be lower when associated with cyclo-oxygenase-2 selective (coxib), compared to non-selective (non-coxib) NSAIDs. The UK Veterinary Medicines Directorate (VMD) supplied frequencies of AEs derived from Periodic Safety Update Reports subdivided by formulation and species for each NSAID molecule. Frequencies of AEs were similar between species. The five most reported AEs were emesis, death, anorexia, lethargy, and diarrhoea. Reported frequency of emesis, renal insufficiency and death was higher with injectable compared to oral NSAIDs (P = 0.043). Reported frequency of emesis, lethargy and death was higher with coxib, compared to non-coxib NSAIDs (P = 0.029). Median (range) interval since authorisation was shorter for coxibs at 5 (2.5-9) years compared to non-coxibs at 15 (12-25) years. A negative correlation between time elapsed since authorisation and the frequency of AEs was identified (rs = -0.11 to -0.94). Higher frequency of reported AEs with injectable NSAIDs may be related to perioperative administration. The AE frequency associated with coxib and non-coxib NSAIDs may be confounded by changes in reporting habits over time. This study highlights the value of interrogating passive surveillance data to identify low frequency AEs and the need to facilitate improvement in recording and collecting AEs in small animal practice.

The effects of an intravenous bolus of dexmedetomidine following extubation in a mixed population of dogs undergoing general anaesthesia and surgery.

An observer blinded, placebo controlled study evaluated the effects of 62.5 µg/m(2) dexmedetomidine administered IV on recovery from isoflurane anaesthesia in dogs. Forty-four healthy dogs, weighing 1.8-19.95 kg, presented for surgery that was expected to cause mild to moderate pain were studied. All were premedicated with 125 µg/m(2) dexmedetomidine and 20 µg/kg buprenorphine IM. Anaesthesia was induced with propofol and maintained with isoflurane. Non-steroidal anti-inflammatory drugs and local anaesthetics were administered as appropriate. Immediately prior to extubation dogs were treated with dexmedetomidine 62.5 µg/m(2) (group D) or an equivalent volume of heparinised saline (S). Assessments of heart rate, respiratory rate, pain (short form Glasgow composite pain scale [SF-GCPS], dynamic interactive visual analogue scale [DIVAS]), sedation (simple descriptive scale [SDS], DIVAS) and mechanical nociceptive threshold (MNT) were performed immediately before premedication, 20 min later, at the time of test drug administration (T0) and at 15-30 min intervals for four hours (T240 min). Recovery quality was scored 0 - 3 (SDS). Data were analysed with Student's t and Mann-Whitney U tests, two-way ANOVA and Fisher's exact test. Significantly fewer poor quality recoveries were observed in group D (D 2 [1-3]; S 2 [0-3]; P=0.02), however, sedation was increased in group D compared to group S from T15 to T150 min (P=0.0001). Pain scores were lower in group D compared to group S from T15 to T120 min (P=0.001), but the requirement for additional analgesia in the first 4h following extubation was not different between groups. Dexmedetomidine may decrease the incidence of poor quality anaesthetic recoveries in dogs.

Isotope effect of mercury diffusion in air.

Identifying and reducing impacts from mercury sources in the environment remains a considerable challenge and requires process based models to quantify mercury stocks and flows. The stable isotope composition of mercury in environmental samples can help address this challenge by serving as a tracer of specific sources and processes. Mercury isotope variations are small and result only from isotope fractionation during transport, equilibrium, and transformation processes. Because these processes occur in both industrial and environmental settings, knowledge of their associated isotope effects is required to interpret mercury isotope data. To improve the mechanistic modeling of mercury isotope effects during gas phase diffusion, an experimental program tested the applicability of kinetic gas theory. Gas-phase elemental mercury diffusion through small bore needles from finite sources demonstrated mass dependent diffusivities leading to isotope fractionation described by a Rayleigh distillation model. The measured relative atomic diffusivities among mercury isotopes in air are large and in agreement with kinetic gas theory. Mercury diffusion in air offers a reasonable explanation of recent field results reported in the literature.

Sedative and analgesic effects of buprenorphine, combined with either acepromazine or dexmedetomidine, for premedication prior to elective surgery in cats and dogs.

OBJECTIVE: To evaluate the sedative and analgesic effects of intramuscular buprenorphine with either dexmedetomidine or acepromazine, administered as premedication to cats and dogs undergoing elective surgery. STUDY DESIGN: Prospective, randomized, blinded clinical study. ANIMALS: Forty dogs and 48 cats. METHODS: Animals were assigned to one of four groups, according to anaesthetic premedication and induction agent: buprenorphine 20 µg kg(-1) with either dexmedetomidine (dex) 250 µg m(-2) or acepromazine (acp) 0.03 mg kg(-1), followed by alfaxalone (ALF) or propofol (PRO). Meloxicam was administered preoperatively to all animals and anaesthesia was always maintained using isoflurane. Physiological measures and assessments of pain, sedation and mechanical nociceptive threshold (MNT) were made before and after premedication, intraoperatively, and for up to 24 hours after premedication. Data were analyzed with one-way, two-way and mixed between-within subjects anova, Kruskall-Wallis analyses and Chi squared tests. Results were deemed significant if p ≤ 0.05, except where multiple comparisons were performed (p ≤ 0.005). RESULTS: Cats premedicated with dex were more sedated than cats premedicated with acp (p < 0.001) and ALF doses were lower in dex cats (1.2 ± 1.0 mg kg(-1) ) than acp cats (2.5 ± 1.9 mg kg(-1)) (p = 0.041). There were no differences in sedation in dogs however PRO doses were lower in dex dogs (1.5 ± 0.8 mg kg(-1) ) compared to acp dogs (3.3 ± 1.1 mg kg(-1) ) (p < 0.001). There were no differences between groups with respect to pain scores or MNT for cats or dogs. CONCLUSION: Choice of dex or acp, when given with buprenorphine, caused minor, clinically detectable, differences in various characteristics of anaesthesia, but not in the level of analgesia. CLINICAL RELEVANCE: A combination of buprenorphine with either acp or dex, followed by either PRO or ALF, and then isoflurane, accompanied by an NSAID, was suitable for anaesthesia in dogs and cats undergoing elective surgery. Choice of sedative agent may influence dose of anaesthetic induction agent.

Mercury accumulation and attenuation at a rapidly forming delta with a point source of mining waste.

The Walker Creek intertidal delta of Tomales Bay, California is impacted by a former mercury mine within the watershed. Eleven short sediment cores (10 cm length) collected from the delta found monomethylmercury (MMHg) concentrations ranging from 0.3 to 11.4 ng/g (dry wt.), with lower concentrations occurring at the vegetated marsh and upstream channel locations. Algal mats common to the delta's sediment surface had MMHg concentrations ranging from 7.5 to 31.5 ng/g, and the top 1 cm of sediment directly under the mats had two times greater MMHg concentrations compared to adjacent locations without algal covering. Spatial trends in resident biota reflect enhanced MMHg uptake at the delta compared to other bay locations. Eighteen sediment cores, 1 to 2 m deep, collected from the 1.2 km2 delta provide an estimate of a total mercury (Hg) inventory of 2500+/-500 kg. Sediment Hg concentrations ranged from pre-mining background conditions of approximately 0.1 microg/g to a post-mining maximum of 5 microg/g. Sediment accumulation rates were determined from three sediment cores using measured differences of (137)Cs activity. We estimate a pre-mining Hg accumulation of less than 20 kg/yr, and a period of maximum Hg accumulation in the 1970s and 1980s with loading rates greater than 50 kg/yr, corresponding to the failure of a tailings dam at the mine site. At the time of sampling (2003) over 40 kg/yr of Hg was still accumulating at the delta, indicating limited recovery. We attribute observed spatial evolution of elevated Hg levels to ongoing inputs and sediment re-working, and estimate the inventory of the anthropogenic fraction of total Hg to be at least 1500+/-300 kg. We suggest ongoing sediment inputs and methylation at the deltaic surface support enhanced mercury levels for resident biota and transfer to higher trophic levels throughout the Bay.

Hydrodynamic and chemical factors in clogging by montmorillonite in porous media.

Clogging by colloid deposits is important in water treatment filters, groundwater aquifers, and petroleum reservoirs. The complexity of colloid deposition and deposit morphology preclude models based on first principles, so this study extends an empirical approach to quantify clogging using a simple, one-parameter model. Experiments were conducted with destabilized suspensions of sodium- and calcium-montmorillonite to quantify the hydrodynamic and chemical factors important in clogging. Greater clogging is observed at slower fluid velocity, consistent with previous investigations. However, calcium-montmorillonite causes 1 order of magnitude less clogging per mass of deposited particles compared to sodium-montmorillonite or a previously published summary of clogging in model granular media. Steady-state conditions, in which the permeability and the quantity of deposited material are both constant, were not observed, even though the experimental conditions were optimized for that purpose. These results indicate that hydrodynamic aspects of clogging by these natural materials are consistent with those of simplified model systems, and they demonstrate significant chemical effects on clogging for fully destabilized montmorillonite clay.

Viscous and gravitational contributions to mixing during vertical brine transport in water-saturated porous media.

The transport of fluids miscible with water arises in groundwater contamination and during remediation of the subsurface environment. For concentrated salt solutions, i.e., brines, the increased density and viscosity determine mixing processes between these fluids and ambient groundwater. Under downward flow conditions, gravitational and viscous forces work against each other to determine the interfacial mixing processes. Historically, mixing has been modeled as a dispersive process, as viscous fingering, and as a combination of both using approaches that were both analytical and numerical. A compilation of previously reported experimental data on vertical miscible displacements by fluids with significant density and viscosity contrasts reveals some agreement with a stability analysis presented by Hill (1952). Additional experimental data on one-dimensional dispersion during downward displacement of concentrated salt solutions by freshwater and freshwater displacement by brines support the stability analysis and provides an empirical representation for dispersion coefficients as functions of a gravity number and a mobility ratio.

Hydrodynamic aspects of particle clogging in porous media.

Data from 6 filtration studies, representing 43 experiments, are analyzed with a simplified version of the single-parameter O'Melia and Ali clogging model. The model parameter displays a systematic dependence on fluid velocity, which was an independent variable in each study. A cake filtration model also explains the data from one filtration study by varying a single, velocity-dependent parameter, highlighting that clogging models, because they are empirical, are not unique. Limited experimental data indicate exponential depth dependence of particle accumulation, whose impact on clogging is quantified with an extended O'Melia and Ali model. The resulting two-parameter model successfully describes the increased clogging that is always observed in the top segment of a filter. However, even after accounting for particle penetration, the two-parameter model suggests that a velocity-dependent parameter representing deposit morphology must also be included to explain the data. Most of the experimental data are described by the single-parameter O'Melia and Ali model, and the model parameter is correlated to the collector Peclet number.