Preparation and characterization of the injectable pH- and temperature-sensitive pentablock hydrogel containing human growth hormone-loaded chitosan nanoparticles via electrospraying.

This research investigated the in vivo gelation, biodegradation, and drug release efficiency of a novel injectable sensitive drug delivery system for human growth hormone (HGh). This composite system comprises pH- and temperature-sensitive hydrogel, designated as oligomer serine-b-poly(lactide)-b-poly(ethylene glycol)-b-poly(lactide)-b-oligomer serine (OS-PLA-PEG-PLA-OS) pentablock copolymer, as matrix and electrosprayed HGh-loaded chitosan (HGh@CS) nanoparticles (NPs) as principal material. The proton nuclear magnetic resonance spectrum of the pH- and temperature-sensitive OS-PLA-PEG-PLA-OS pentablock copolymer hydrogel proved that this copolymer was successfully synthesized. The HGh was encapsulated in chitosan (CS) NPs by an electrospraying system in acetic acid with appropriate granulation parameters. The scanning electron microscopy images and size distribution showed that the HGh@CS NPs formed had an average diameter of 366.1 ± 214.5 nm with a discrete spherical shape and dispersed morphology. The sol-gel transition of complex gel based on HGh@CS NPs and OS-PLA-PEG-PLA-OS pentablock hydrogel was investigated at 15 °C and pH 7.8 in the sol state and gelled at 37 °C and pH 7.4, which is suitable for the physiological conditions of the human body. The HGh release experiment of the composite system was performed in an in vivo environment, which demonstrated the ability to release HGh, and underwent biodegradation within 32 days. The findings of the investigation revealed that the distribution of HGh@CS NPs into the hydrogel matrix not only improved the mechanical properties of the gel matrix but also controlled the drug release kinetics into the systematic bloodstream, which ultimately promotes the desired therapeutic body growth depending on the distinct concentration used.

pH-temperature Responsive Hydrogel-Mediated Delivery of Exendin-4 Encapsulated Chitosan Nanospheres for Sustained Therapeutic Efficacy in Type 2 Diabetes Mellitus.

Type 2 Diabetes Mellitus (T2D) is a chronic, obesity-related, and inflammatory disorder characterize by insulin resistance, inadequate insulin secretion, hyperglycemia, and excessive glucagon secretion. Exendin-4 (EX), a clinically established antidiabetic medication that acts as a glucagon-like peptide-1 receptor agonist, is effective in lowering glucose levels and stimulating insulin secretion while significantly reducing hunger. However, the requirement for multiple daily injections due to EX's short half-life is a significant limitation in its clinical application, leading to high treatment costs and patient inconvenience. To address this issue, an injectable hydrogel system is developed that can provide sustained EX release at the injection site, reducing the need for daily injections. In this study, the electrospray technique is examine to form EX@CS nanospheres by electrostatic interaction between cationic chitosan (CS) and negatively charged EX. These nanospheres are uniformly dispersed in a pH-temperature responsive pentablock copolymer, which forms micelles and undergoes sol-to-gel transition at physiological conditions. Following injection, the hydrogel gradually degraded, exhibiting excellent biocompatibility. The EX@CS nanospheres are subsequently released, maintaining therapeutic levels for over 72 h compared to free EX solution. The findings demonstrate that the pH-temperature responsive hydrogel system containing EX@CS nanospheres can be a promising platform for the treatment of T2D.

A novel injectable pH-temperature sensitive hydrogel containing chitosan-insulin electrosprayed nanosphere composite for an insulin delivery system in type I diabetes treatment.

A novel insulin composite delivery system was prepared and characterized. The composite consisted of a pH- and temperature-sensitive hydrogel, which is an oligomer serine-b-poly(lactide)-b-poly(ethylene glycol)-b-poly(lactide)-b-oligomer serine (OS-PLA-PEG-PLA-OS) pentablock copolymer, as matrix and chitosan-insulin electrosprayed nanospheres (CIN) as constituent materials. The properties of the OS-PLA-PEG-PLA-OS pentablock copolymer and the chitosan-insulin nanoparticles were characterized. The chitosan-insulin nanospheres uniformly distributed in the matrix had a reinforcing effect on the mechanical properties and prolonged the degradation time of the hydrogel depot under body conditions. The composite solutions accommodating different concentrations of the chitosan-insulin nanospheres were subcutaneously injected into induced diabetic BALB/c mice to study the in vivo insulin-release profile. The result showed that insulin concentrations in blood plasma were maintained at a steady-state level. Furthermore, the bio-properties of the insulin were retained and it showed a blood glucose level reducing effect for more than 60 hours after injection to a streptozotocin (STZ)-induced diabetic mouse model. The results suggested that this injectable pH-temperature sensitive hydrogel containing chitosan-insulin electrosprayed nanosphere composites has promising potential applications for type 1 diabetes treatment.

Polyurethane/polycaprolactone membrane grafted with conjugated linoleic acid for artificial vascular graft application.

Constructing satisfied small-diameter vascular graft (diameter less than 6 mm) remains an unsolvable challenge in vascular tissue engineering. This study described the fabrication of electrospun polyurethane/polycaprolactone (PU/PCL) membranes chemically grafted with various densities of conjugated linoleic acid (CLA) - an antithrombotic fatty acid - for making small-diameter blood vessel. Differences in mechanical, antithrombotic properties and biocompatibility of the membranes resulting from the CLA-grafting procedure were the focus of the study. Investigation of mechanical properties relevant to vascular graft application revealed that these properties of the membranes remained unaffected and satisfied clinical criteria following the CLA graft. Blood-membrane interaction assays showed that the CLA-grafted membranes mitigated the adhesion of blood cells, as well as preventing blood coagulation. These effects were also commensurate with increasing density of CLA, suggesting an effective approach to improve antithromboticity. Cellular tests suggested that CLA has an optimal density at which it promoted cell proliferation on the surface of the membranes; however, excessive presence of CLA might cause undesirable inhibition on cells. In conclusion, PU/PCL membrane grafted with CLA could be a prospective material for vascular tissue engineering with further development and investigation.

Self-Assemblable Polymer Smart-Blocks for Temperature-Induced Injectable Hydrogel in Biomedical Applications.

Self-assembled temperature-induced injectable hydrogels fabricated via self-assembly of polymer smart-blocks have been widely investigated as drug delivery systems and platforms for tissue regeneration. Polymer smart-blocks that can be self-assembly play an important role in fabrication of hydrogels because they can self-assemble to induce the gelation of their copolymer in aqueous solution. The self-assembly occurs in response to an external stimulus change, such as temperature, pH, glucose, ionic strength, light, magnetic field, electric field, or their combination, which results in property transformations like hydrophobicity, ionization, and conformational change. The self-assembly smart-block based copolymers exist as a solution in aqueous media at certain conditions that are suitable for mixing with bioactive molecules and/or cells. However, this solution turns into a hydrogel due to the self-assembly of the smart-blocks under exposure to an external stimulus change in vitro or injection into the living body for a controllable release of loaded bioactive molecules or serving as a biomaterial scaffold for tissue regeneration. This work reports current scenery in the development of these self-assembly smart-blocks for fabrication of temperature-induced injectable physically cross-linked hydrogels and their potential application as drug delivery systems and platforms for tissue engineering.

Facile and Scalable Fabrication of Porous Polystyrene Fibers for Oil Removal by Centrifugal Spinning.

The demand for an efficient oil sorbent with high sorption capacity, low cost, scalable fabrication, and high selectivity for the cleanup of spreading oil on water is increasingly urgent due to the frequent occurrence of oil spill accidents in seawater all over the world. In this study, porous polystyrene (PS) fibers with high hydrophobicity and superoleophilicity were directly fabricated by a centrifugal spinning method (CS). The effect of solvents, tetrahydrofuran (THF), and dimethylformamide (DMF) on the morphology and porous structure of the polystyrene fibers was evaluated by using scanning electron microscopy and nitrogen adsorption-desorption experiments. The formation mechanism for the porous structure on the fibers was also evaluated. The oil sorption capacities of the PS fibers for silicon oil, pump oil, and vegetable oil were investigated. The highest oil sorption capacity was found in PS fibers fabricated from PS solution with a THF/DMF weight ratio of 1/3, which exhibited the highest specific surface area, pore volume, and porosity. The high productivity and highly porous structure of PS fibers indicate that CS is a promising method to fabricate porous fibers for the cleanup of oil spills.

Mechanisms of removal of heavy metal ions by ZnO particles.

Effluent discharges from industry and domestic waste containing unknown inorganic pollutants. In this work, different mechanisms of heavy metal ions removal using ZnO particles were studied. ZnO particles were synthesized using solid precipitation technique. The morphology of ZnO particles was rod-like shape. The average length and diameter of ZnO particle were 497.34 ± 15.55 and 75.78 ± 10.39nm, respectively. These particles removed effectively heavy metal ions such as Cu(II), Ag(I) and Pb(II) ions with efficiency >85% under exposure of 1 hour of UV light. However, poor removal efficiency, i.e. <15% was observed for Cr(VI), Mn(II), Cd(II) and Ni(II) ions. The removal of these heavy metal ions was in the forms of metals or metal oxide via reduction/oxidation or adsorption mechanism.

Centrifugally Spun Recycled PET: Processing and Characterization.

Centrifugal spinning, which is a high-productivity fiber fabrication technique, was used to produce a value-added product from recycled poly(ethylene terephthalate) (rPET). In the present study, rPET fibers, with fiber diameters ranging from submicron to micrometer in scale, were fabricated by spinning a solution of rPET in a mixture of dichloromethane and trifluoroacetic acid. The influence of the polymer solution concentration (the viscosity), the rotational speed of the spinneret, and the inner diameter of the needles on the formation and morphology and mechanical properties of the fibers were examined through scanning electron microscopy and using a tensile testing machine. The thermal behaviors of fibrous mats with various average diameters were also investigated through differential scanning calorimetry. The smoothest and smallest fibers, with an average diameter of 619 nm, were generated using an rPET solution of 10 wt % under a rotation speed of 15,000 rpm using needles having an inner diameter of 160 µm. The fibrous mats have an average tensile strength and modulus of 4.3 MPa and 34.4 MPa, respectively. The productivity and the mechanical properties indicate that centrifugal spinning is an effective technique to fabricate high-value product from rPET.

Engineering highly swellable dual-responsive protein-based injectable hydrogels: the effects of molecular structure and composition in vivo.

Stimuli-responsive hydrogels, known as smart hydrogels, are three-dimensional amphiphilic or hydrophilic polymer networks that are able to change their volume or phase, and other properties, including viscosity, structure, and dimension, in response to changes in pH, temperature, and magnetic or electric field. Highly swellable, dual-responsive bovine serum albumin (BSA)-based injectable hydrogels are prepared here by the chemical conjugation of pH- and temperature-responsive oligo(sulfamethazine acrylate-co-N-isopropylacrylamide) (oligo(SMA-co-NIPAM)) copolymers on the surface of BSA through carbodiimide-mediated chemistry. The pH- and temperature-responsive oligomer-bearing BSA conjugates show rapid sol-to-gel phase transition properties. Specifically, the free-flowing conjugates at high pH (pH 8.4, 23 °C) are transformed to a viscoelastic gel under physiological conditions (pH 7.4, 37 °C). The swelling ratio, gel strength, and pore size of the BSA hydrogel were tuned by altering the conjugation ratio of the oligo(SMA-co-NIPAM) copolymers of various lengths and compositions to BSA. Subcutaneously administered BSA conjugate sols into the dorsal region of Sprague-Dawley rats formed an in situ gel. When the oligo(NIPAM) content in the hydrogel was high, the degradation rate of BSA hydrogels was remarkably slow, and two weeks after in vivo administration, the hydrogels with high oligo(NIPAM) had swollen more than 4-fold. An in vivo biodegradation study demonstrated that no necrosis or hemorrhage was observed in the tissues with the hydrogels. The concurrent stimuli-responsivity under physiological conditions and high elasticity suggest that these smart hydrogels may open a new avenue for hydrogel applications.

pH-Sensitive pentablock copolymer nanocapsules as nontoxic and efficient gene carriers.

A biodegradable amphiphilic pentablock copolymer PAE-PCL-PEG-PCL-PAE with a pH-sensitive unit was synthesized for use as a nontoxic, biodegradable carrier for gene delivery by forming nanocapsules entrapping nucleic acid drugs. The PAE block can interact with plasmid DNA to form polyelectrolyte complexes in an acidic environment. At physiological pH, the PAE blocks are deprotonated and form an insoluble skin, resulting in the formation of nanocapsules that encapsulate plasmid DNA. The surface charges of the nanocapsules became almost neutral at pH = 7.4, and their size ranged from 210 to 280 nm. The nanocapsule maintained most of its transfection efficiency even in the presence of serum. These nanocapsules are therefore potential carriers for systemic gene therapy.

Controlled release of insulin from pH/temperature-sensitive injectable pentablock copolymer hydrogel.

A pH- and temperature-sensitive hydrogel of poly(beta-amino ester)-poly(epsilon-caprolactone)-poly (ethylene glycol)-poly(epsilon-caprolactone)-poly(beta-amino ester) (PAE-PCL-PEG-PCL-PAE) pentablock copolymer was evaluated as a sustained injectable insulin delivery system. Insulin was readily loaded into the matrix, forming an ionically linked insulin-PAE complex. Complex mixtures containing various concentrations of insulin and copolymer were subcutaneously injected into male Sprague-Dawley rats to study the profile of insulin release in vivo. The insulin-release profile showed that insulin was maintained at a constant steady-state level for 15 days, and further demonstrated that insulin levels were controlled by the amount of insulin loaded into the copolymer and the copolymer concentration in the hydrogel. The effect of the insulin-gel complex was further investigated in the streptozotocin (STZ) diabetic rat model. After subcutaneously injecting complex mixtures into STZ-induced diabetic rats, blood glucose and plasma insulin levels were measured. The results showed that the diabetic rats could be treated for more than 1 week with a single injection of the complex mixture containing 10 mg/mL insulin in a 30 wt.% copolymer solution, suggesting that this pH/temperature-sensitive insulin-hydrogel complex system may have therapeutic potential.