Analysis of p-Type Doping in Graphene Induced by Monolayer-Oxidized TMDs.

Doping is one of the most difficult technological challenges for realizing reliable two-dimensional (2D) material-based semiconductor devices, arising from their ultrathinness. Here, we systematically investigate the impact of different types of nonstoichiometric solid MOx (M are W or Mo) dopants obtained by oxidizing transition metal dichalcogenides (TMDs: WSe2 or MoS2) formed on graphene FETs, which results in p-type doping along with disorders. From the results obtained in this study, we were able to suggest an analytical technique to optimize the optimal UV-ozone (UVO) treatment to achieve high p-type doping concentration in graphene FETs (∼2.5 × 1013 cm-2 in this study) without generating defects, mainly by analyzing the time dependency of D and D' peaks measured by Raman spectroscopy. Furthermore, an analysis of the structure of graphene sheets using TEM indicates that WOx plays a better protective role in graphene, compared to MoOx, suggesting that WOx is more effective for preventing the degradation of graphene during UVO treatment. To enhance the practical application aspect of our work, we have fabricated a graphene photodetector by selectively doping the graphene through oxidized TMDs, creating a p-n junction, which resulted in improved photoresponsivity compared to the intrinsic graphene device. Our results offer a practical guideline for the utilization of surface charge transfer doping of graphene toward CMOS applications.

High-Strength Epoxy Nanocomposites Reinforced with Photochemically Treated CNTs.

A carbon nanotube (CNT)/epoxy nanocomposite was prepared using a photochemical surface modification process of CNTs. The vacuum ultraviolet (VUV)-excimer lamp treatment created reactive sites on the CNT surface. Increasing the irradiation time increased the oxygen functional groups and changed the oxygen bonding state such as C=O, C-O, and -COOH. By the VUV-excimer irradiation on CNTs, the epoxy infiltrated well between the CNT bundles and formed a strong chemical bond between CNT and epoxy. The tensile strength and elastic modulus of the nanocomposites with VUV-excimer irradiated sample during 30 min (R30) were found to increase by 30 and 68% compared to using pristine CNT, respectively. R30 was not pulled out and remained embedded in the matrix until the fracture occurred. The VUV-excimer irradiation is an effective surface modification and functionalization method for improving the mechanical properties of CNT nanocomposite materials.

Multifunctional-high resolution imaging plate based on hydrophilic graphene for digital pathology.

In the present study, we showed that hydrophilic graphene can serve as an ideal imaging plate for biological specimens. Graphene being a single-atom-thick semi-metal with low secondary electron emission, array tomography analysis of serial sections of biological specimens on a graphene substrate showed excellent image quality with improvedz-axis resolution, without including any conductive surface coatings. However, the hydrophobic nature of graphene makes the placement of biological specimens difficult; graphene functionalized with polydimethylsiloxane oligomer was fabricated using a simple soft lithography technique and then processed with oxygen plasma to provide hydrophilic graphene with minimal damage to graphene. High-quality scanning electron microscopy images of biological specimens free from charging effects or distortion were obtained, and the optical transparency of graphene enabled fluorescence imaging of the specimen; high-resolution correlated electron and light microscopy analysis of the specimen became possible with the hydrophilic graphene plate.

Ultrastrong Hybrid Fibers with Tunable Macromolecular Interfaces of Graphene Oxide and Carbon Nanotube for Multifunctional Applications.

Individual carbon nanotubes (CNT) and graphene have unique mechanical and electrical properties; however, the properties of their macroscopic assemblies have not met expectations because of limited physical dimensions, the limited degree of dispersion of the components, and various structural defects. Here, a state-of-the-art assembly for a novel type of hybrid fiber possessing the properties required for a wide variety of multifunctional applications is presented. A simple and effective multidimensional nanostructure of CNT and graphene oxide (GO) assembled by solution processing improves the interfacial utilization of the components. Flexible GOs are effectively intercalated between nanotubes along the shape of CNTs, which reduces voids, enhances orientation, and maximizes the contact between elements. The microstructure is finely controlled by the elements content ratio and dimensions, and an optimal balance improves the mechanical properties. The hybrid fibers simultaneously exhibit exceptional strength (6.05 GPa), modulus (422 GPa), toughness (76.8 J g-1 ), electrical conductivity (8.43 MS m-1 ), and knot strength efficiency (92%). Furthermore, surface and electrochemical properties are significantly improved by tuning the GO content, further expanding the scope of applications. These hybrid fibers are expected to offer a strategy for overcoming the limitations of existing fibers in meeting the requirements for applications in the fiber industry.

Ultrahigh strength, modulus, and conductivity of graphitic fibers by macromolecular coalescence.

Theoretical considerations suggest that the strength of carbon nanotube (CNT) fibers be exceptional; however, their mechanical performance values are much lower than the theoretical values. To achieve macroscopic fibers with ultrahigh performance, we developed a method to form multidimensional nanostructures by coalescence of individual nanotubes. The highly aligned wet-spun fibers of single- or double-walled nanotube bundles were graphitized to induce nanotube collapse and multi-inner walled structures. These advanced nanostructures formed a network of interconnected, close-packed graphitic domains. Their near-perfect alignment and high longitudinal crystallinity that increased the shear strength between CNTs while retaining notable flexibility. The resulting fibers have an exceptional combination of high tensile strength (6.57 GPa), modulus (629 GPa), thermal conductivity (482 W/m·K), and electrical conductivity (2.2 MS/m), thereby overcoming the limits associated with conventional synthetic fibers.

Two-Dimensional Stacked Composites of Self-Assembled Alkane Layers and Graphene for Transparent Gas Barrier Films with Low Permeability.

Self-assembled alkane layers are introduced between graphene layers to physically block nanometer size defects in graphene and lateral gas pathways between graphene layers. A well-defined hexatriacontane (HTC) monolayer on graphene could cover nanometer-size defects because of the flexible nature and strong intermolecular van der Waals interactions of alkane, despite the roughness of graphene. In addition, HTC multilayers between graphene layers greatly improve their adhesion. This indicates that HTC multilayers between graphene layers can effectively block the lateral pathway between graphene layers by filling open space with close-packed self-assembled alkanes. By these mechanisms, alternately stacked composites of graphene and self-assembled alkane layers greatly increase the gas-barrier property to a water vapor transmission rate (WVTR) as low as 1.2 × 10-3 g/(m2 day), whereas stacked graphene layers generally show a WVTR < 0.5 g/(m2 day). Furthermore, the self-assembled alkane layers have superior crystallinity and wide bandgap, so they have little effect on the transmittance.

Outstanding Strengthening and Toughening Behavior of 3D-Printed Fiber-Reinforced Composites Designed by Biomimetic Interfacial Heterogeneity.

3D printing of fiber-reinforced composites is expected to be the forefront technology for the next-generation high-strength, high-toughness, and lightweight structural materials. The intrinsic architecture of 3D-printed composites closely represents biomimetic micro/macrofibril-like hierarchical structure composed of intermediate filament assembly among the micron-sized reinforcing fibers, and thus contributes to a novel mechanism to simultaneously improve mechanical properties and structural features. Notably, it is found that an interfacial heterogeneity between numerous inner interfaces in the hierarchical structure enables an exceptional increase in the toughness of composites. The strong interfacial adhesion between the fibers and matrix, with accompanying the inherently weak interfacial adhesion between intermediate filaments and the resultant interfacial voids, provide a close representation of the toughness behavior of natural architectures relying on the localized heterogeneity. Given the critical embedment length of fiber reinforcement, extraordinary improvement has been attained not only in the strength but also in toughness taking advantage of the synergy effect from the aforementioned nature-inspired features. Indeed, the addition of a small amount of short fiber to the brittle bio-filaments results in a noticeable increase of more than 200% in the tensile strength and modulus with further elongation increment. This article highlights the inherent structural hierarchy of 3D-printed composites and the relevant sophisticated mechanism for anomalous mechanical reinforcement.

Sulfamoylbenzamide-based Capsid Assembly Modulators for Selective Inhibition of Hepatitis B Viral Replication.

As the spread of infections caused by hepatitis B virus (HBV) threatens public health worldwide, investigations from multiple perspectives and of various mechanisms of action are urgently required to increase the HBV cure rate. Targeting the encapsidation of the nuclear capsid protein (core protein, HBc) has emerged as an attractive strategy for inhibiting the viral assembly process; however, a drug targeting this mechanism has not yet been approved. We synthesized novel sulfamoylbenzamides (SBAs) as capsid assembly modulators of HBV and found that the effects and safety profiles of compounds 3 and 8 have potential therapeutic applicability against HBV. The formation of tubular particles was time-dependent in the presence of 3, indicating a new mode of protein assembly by SBA compounds. Our findings provide a new entity for developing safe and efficient treatments for HBV infection.

Universal Oriented van der Waals Epitaxy of 1D Cyanide Chains on Hexagonal 2D Crystals.

The atomic or molecular assembly on 2D materials through the relatively weak van der Waals interaction is quite different from the conventional heteroepitaxy and may result in unique growth behaviors. Here, it is shown that straight 1D cyanide chains display universal epitaxy on hexagonal 2D materials. A universal oriented assembly of cyanide crystals (AgCN, AuCN, and Cu0.5Au0.5CN) is observed, where the chains are aligned along the three zigzag lattice directions of various 2D hexagonal crystals (graphene, h-BN, WS2, MoS2, WSe2, MoSe2, and MoTe2). The potential energy landscape of the hexagonal lattice induces this preferred alignment of 1D chains along the zigzag lattice directions, regardless of the lattice parameter and surface elements as demonstrated by first-principles calculations and parameterized surface potential calculations. Furthermore, the oriented microwires can serve as crystal orientation markers, and stacking-angle-controlled vertical 2D heterostructures are successfully fabricated by using them as markers. The oriented van der Waals epitaxy can be generalized to any hexagonal 2D crystals and will serve as a unique growth process to form crystals with orientations along the zigzag directions by epitaxy.

Modified tunicate nanocellulose liquid crystalline fiber as closed loop for recycling platinum-group metals.

Rising demand and elemental rarity requires the recycling of precious metals such as platinum group elements (PGMs). Recently, biosorption has been focused on the capability of recovering precious metals, but in practice, recycling is inefficient or far away from a closed-loop material system. Here we use a polyethylenimine (PEI)-grafted spun-fiber made of cellulose nanofibril (CNF) extracted from a tunicate as a biosorbent for PGMs. Liquid crystallinity (LC) of TCNF suspension appears to contribute the generation of well-developed open porous structure in the fiber. We show the fiber has the selectivity and high capacity of Pt (120.2 mg/g, 86%) and Pd (26.5 mg/g, 74.2%) adsorption under the presence of other metals in simulated automobile waste. The adsorbed Pt and Pd with nano-scale clusters were uniformly distributed on the porous surface, which were directly applied as a catalyst. These results propose an easy approach to recover precious metals and reuse them directly, thereby closing loops of metal recycling.

Revealing molecular-level surface redox sites of controllably oxidized black phosphorus nanosheets.

Bulk and two-dimensional black phosphorus are considered to be promising battery materials due to their high theoretical capacities of 2,600 mAh g-1. However, their rate and cycling capabilities are limited by the intrinsic (de-)alloying mechanism. Here, we demonstrate a unique surface redox molecular-level mechanism of P sites on oxidized black phosphorus nanosheets that are strongly coupled with graphene via strong interlayer bonding. These redox-active sites of the oxidized black phosphorus are confined at the amorphorized heterointerface, revealing truly reversible pseudocapacitance (99% of total stored charge at 2,000 mV s-1). Moreover, oxidized black-phosphorus-based electrodes exhibit a capacitance of 478 F g-1 (four times greater than black phosphorus) with a rate capability of ~72% (compared to 21.2% for black phosphorus) and retention of ~91% over 50,000 cycles. In situ spectroelectrochemical and theoretical analyses reveal a reversible change in the surface electronic structure and chemical environment of the surface-exposed P redox sites.

Publisher Correction: Synthesis of nanobelt-like 1-dimensional silver/nanocarbon hybrid materials for flexible and wearable electronics.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Ultimate limit in size and performance of WSe2 vertical diodes.

Precise doping-profile engineering in van der Waals heterostructures is a key element to promote optimal device performance in various electrical and optical applications with two-dimensional layered materials. Here, we report tungsten diselenide- (WSe2) based pure vertical diodes with atomically defined p-, i- and n-channel regions. Externally modulated p- and n-doped layers are respectively formed on the bottom and the top facets of WSe2 single crystals by direct evaporations of high and low work-function metals platinum and gadolinium, thus forming atomically sharp p-i-n heterojunctions in the homogeneous WSe2 layers. As the number of layers increases, charge transport through the vertical WSe2 p-i-n heterojunctions is characterized by a series of quantum tunneling events; direct tunneling, Fowler-Nordheim tunneling, and Schottky emission tunneling. With optimally selected WSe2 thickness, our vertical heterojunctions show superb diode characteristics of an unprecedentedly high current density and low turn-on voltages while maintaining good current rectification.

Ultrathin Metal Crystals: Growth on Supported Graphene Surfaces and Applications.

Controlled nucleation and growth of metal clusters in metal deposition processes is a long-standing issue for thin-film-based electronic devices. When metal atoms are deposited on solid surfaces, unintended defects sites always lead to a heterogeneous nucleation, resulting in a spatially nonuniform nucleation with irregular growth rates for individual nuclei, resulting in a rough film that requires a thicker film to be deposited to reach the percolation threshold. In the present study, it is shown that substrate-supported graphene promotes the lateral 2D growth of metal atoms on the graphene. Transmission electron microscopy reveals that 2D metallic single crystals are grown epitaxially on supported graphene surfaces while a pristine graphene layer hardly yields any metal nucleation. A surface energy barrier calculation based on density functional theory predicts a suppression of diffusion of metal atoms on electronically perturbed graphene (supported graphene). 2D single Au crystals grown on supported graphene surfaces exhibit unusual near-infrared plasmonic resonance, and the unique 2D growth of metal crystals and self-healing nature of graphene lead to the formation of ultrathin, semitransparent, and biodegradable metallic thin films that could be utilized in various biomedical applications.

Oxygen-deficient triple perovskites as highly active and durable bifunctional electrocatalysts for oxygen electrode reactions.

Highly active and durable bifunctional oxygen electrocatalysts have been of pivotal importance for renewable energy conversion and storage devices, such as unitized regenerative fuel cells and metal-air batteries. Perovskite-based oxygen electrocatalysts have emerged as promising nonprecious metal bifunctional electrocatalysts, yet their catalytic activity and stability still remain to be improved. We report a high-performance oxygen electrocatalyst based on a triple perovskite, Nd1.5Ba1.5CoFeMnO9-δ (NBCFM), which shows superior activity and durability for oxygen electrode reactions to single and double perovskites. When hybridized with nitrogen-doped reduced graphene oxide (N-rGO), the resulting NBCFM/N-rGO catalyst shows further boosted bifunctional oxygen electrode activity (0.698 V), which surpasses that of Pt/C (0.801 V) and Ir/C (0.769 V) catalysts and which, among the perovskite-based electrocatalysts, is the best activity reported to date. The superior catalytic performances of NBCFM could be correlated to its oxygen defect-rich structure, lower charge transfer resistance, and smaller hybridization strength between O 2p and Co 3d orbitals.

Carboxymethlyated cellulose nanofibrils(CMCNFs) embedded in polyurethane foam as a modular adsorbent of heavy metal ions.

Polyurethane (PU) foam was utilized as an efficient and durable template to immobilize surface-functionalized nanocellulose, carboxymethylated cellulose nanofibrils (CMCNFs), to address some of the challenges for the application of nanocellulose to industrial water purification, such as its agglomeration, difficulties in separation from effluent, and regeneration. The composite foams exhibited well dispersed CMCNFs in PU matrices with open pore structure; the hydrogen bonds result in the enhancement of mechanical strength, which is another requirement of ideal adsorbents for wastewater treatment. The composite foams show high adsorption capacity and the potential for recyclability. The combination of optimal surface modification of nanocellulose with isolation and immobilization in durable PU foam achieved an efficient and cost-competitive bio-sorbent for heavy metal ions.

Full-color capable light-emitting diodes based on solution-processed quantum dot layer stacking.

To date, most of the studies on quantum dot-light-emitting diodes (QLEDs) have been dedicated to the fabrication of high-efficiency monochromatic devices. However, for the ultimate application of QLEDs to the next-generation display devices, QLEDs should possess a full-color emissivity. In this study, we report the fabrication of all-solution-processed full-color-capable white QLEDs with a standard device architecture, where sequentially stacked blue (B)/green (G)/red (R) quantum dot (QD)-emitting layers (EMLs) are sandwiched by poly(9-vinylcarbazole) as the hole transport layer and ZnO nanoparticles (NPs) as the electron transport layer. To produce interlayer mixing-free, well-defined B/G/R QD layering assemblies via successive spin casting, an ultrathin ZnO NP buffer is inserted between different-colored QD layers. The present full-color-capable white QLED exhibits high device performance with the maximum values of 16 241 cd m-2 for luminance and 6.8% for external quantum efficiency. The promising results indicate that our novel EML design of ZnO NP buffer-mediated QD layer stacking may afford a viable means towards bright, efficient full-color-capable white devices.

Structural effect of two-dimensional BNNS on grain growth suppressing behaviors in Al-matrix nanocomposites.

While nanocrystalline (NC) metals exhibit superior strength to conventional microcrystalline metals, their thermal instability has hampered their application at high temperatures. Herein, two-dimensional (2D) boron nitride nanosheets (BNNS) are proposed as reinforcement to enhance the strength as well as the thermal stability of NC Al. The strength of pure Al was increased from 80 to 468 MPa by refining its grains from ~600 to ~40 nm, and it was further enhanced to 685 MPa by incorporating 2 vol% of BNNS. Moreover, the small amount of BNNS was found to effectively suppress grain growth of NC Al at 580 °C (~0.9 Tm, where Tm is the melting point of Al), which prevented a strength drop at high temperature. Finally, the Zener pinning model in conjunction with phase-field simulations was utilized to qualitatively analyze the effect of the BNNS on the grain boundary pinning as a function of volume, shape, and orientation of the reinforcement. The model demonstrated that the pinning force of 2D reinforcements is much higher than that of spherical particles. Hence, 2D BNNS offer the possibility of developing Al-matrix nanocomposites for high-temperature structural applications.

5-Bromo-4',5'-bis(dimethylamino)fluorescein: Synthesis and Photophysical Studies.

In this study, three new fluorescein derivatives-5-bromo-4',5'-dinitrofluorescein (BDNF), 5-bromo-4',5'-diaminofluorescein (BDAF), and 5-bromo-4',5'-bis(dimethylamino)fluorescein (BBDMAF)-were synthesized and their pH-dependent protolytic equilibria were investigated. In particular, BBDMAF exhibited pH-dependent fluorescence, showing strong emission only at pH 3-6. BBDMAF bears a bromine moiety and thus, can be used in various cross-coupling reactions to prepare derivatives and take advantage of its unique emission properties. To confirm this, the Suzuki and Sonogashira reactions of BBDMAF with phenylboronic acid and phenylacetylene, respectively, were performed, and the desired products were successfully obtained.

Recovery Mechanism of Degraded Black Phosphorus Field-Effect Transistors by 1,2-Ethanedithiol Chemistry and Extended Device Stability.

Black phosphorus (BP) has drawn enormous attention for both intriguing material characteristics and electronic and optoelectronic applications. In spite of excellent advantages for semiconductor device applications, the performance of BP devices is hampered by the formation of phosphorus oxide on the BP surface under ambient conditions. It is thus necessary to resolve the oxygen-induced degradation on the surface of BP to recover the characteristics and stability of the devices. To solve this problem, it is demonstrated that a 1,2-ethanedithiol (EDT) treatment is a simple and effective way to remove the bubbles formed on the BP surface. The device characteristics of the degraded BP field-effect transistor (FET) are completely recovered to the level of the pristine cases by the EDT treatment. The underlying principle of bubble elimination on the BP surface by the EDT treatment is systematically analyzed by density functional theory calculation, atomic force microscopy, and X-ray photoelectron spectroscopy analysis. In addition, the performance of the hexagonal boron nitride-protected BP FET is completely retained without changing device characteristics even when exposed to 30 d or more in air. The EDT-induced recovering effect will allow a new route for the optimization of electronic and optoelectronic devices based on BP.