Preparation of bioactive film based on chitosan and essential oils mixture for enhanced preservation of food products.

Recently, the concept of biodegradable and bioactive packaging and surface coating has become a trend. In this work, the bioactive films of chitosan were elaborated following the casting method. Contrary to the films containing the Cinnamomum zeylanicum Blume, Thymus satureioides Cosson, and Syzygium aromaticum essential oils (EOs) mixtures, the control film was thin, colorless, and showed high moisture content, swelling degree, and elongation at break. Concerning the physicochemical parameters, the incorporation of the EOs mixtures minimized the hydrophobicity of the material (θw < 65°) and modified randomly its surface free energy components (γ-; γ+; γLW). The theoretical prediction of Aspergillus sp. and Rhizopus sp. adherence to the chitosan-based films was relatively correlated to the experimental results (r = -0.601). The latter showed that 6.80 % and 19.02 % of the control film surface was covered by Aspergillus sp. and Rhizopus sp. spores, respectively. In contrast, no fungal adherence was noticed in the case of the film incorporating the triple EOs mixture. These promising results revealed that chitosan film containing C. zeylanicum, T. satureioides, and S. aromaticum EOs mixtures could be utilized as a surface coating or bioactive packaging in the food industry.

Valorization of phosphate sludge and its bacterial biomass as a potential bioformulation for improving tomato growth.

Phosphorus (P) is a vital limiting nutrient element for plant growth and yield. In Morocco, the natural phosphate rock extractions generate significant amounts of phosphate wash sludge (PS), which could be reused productively, thus creating another added value for farmers. The present study aimed to demonstrate the combination effect of soil amendment by two different PS concentrations (1% and 5%) associated with three phosphate-solubilizing bacteria (PSB) consortia (C1, C2, and C3), isolated from phosphate mining sludge, on plant growth and nutrient uptake in tomato seedlings (Solanum lycopersicum). The results obtained showed that this bioformulation significantly improved P solubilization and plant growth compared to control conditions. Of all the combinations, C3-inoculated soil amended with 5% PS was the most effective in significantly improving plant height and dry and fresh biomass of shoots and roots. P solubilization and its availability for tomato seedlings uptake were maximal with the bioformulation (C3 + 5% PS). This latter enhanced P and potassium (K) uptake by 27.89 and 38.81% in shoots and 38.57% and 74.67% in roots, respectively, compared to non-inoculated soil amended with 5% PS. The highest flowering rate (200 %) was recorded in C3-inoculated soil amended with 5% PS. Supporting these results, the principal component analysis discriminated this bioformulation (C3 + 5% PS) from the other combinations. Our results open up prospects for upgrading phosphate sludge enriched with PSB consortia as a biofertilizer that can be used in ecofriendly agriculture integrated into the circular economy.

The combined effect of essential oils on wood physico-chemical properties and their antiadhesive activity against mold fungi: application of mixture design methodology.

In the heritage field, the microbial adhesion on wood, and consequently the formation of biofilm led to inestimable losses of historical and cultural monuments. Thereby, this study aimed to examine the combined effect of Thymus vulgaris, Myrtus communis, and Mentha pulegium essential oils on wood surface physico-chemical properties, and to elaborate the optimal mixture using the mixture design approach coupled to the contact angle method. It was found that both wood hydrophobicity and electron donor character increased significantly after treatment using an optimal mixture containing 57% and 43% of M. pulegium and M. communis essential oils, respectively. The theoretical and experimental fungal adhesion on untreated and treated wood were also investigated. The results showed that the adhesion was favorable on untreated wood and reduced using the optimal mixture. Moreover, the experimental data demonstrated that the same mixture exhibited an antiadhesive efficacy effect with a reduction of 36-75% in adhesion.

Elaboration and general evaluation of chitosan-based films containing terpene alcohols-rich essential oils.

Recently, the scientific community is interested in the synthesis of biodegradable and bioactive packaging to replace oil-based ones. Therefore, the present study aims to elaborate an active and biodegradable material using chitosan (CS-film) combined with pelargonium, tea tree, marjoram, and thyme essential oils (EOs), and then evaluate their different properties and biological activities. The obtained data showed an augmentation in CS-film thickness and opacity following the addition of EOs ranging from 17 ± 3 to 42 ± 2 µm and from 1.53 ± 0.04 to 2.67 ± 0.09, respectively. Furthermore, a significant decrease in the water vapor transmission rate and moisture content parameters was recorded as regards the treated CS-films. On the other hand, the treatment with EOs engenders random modifications in the physicochemical and mechanical characteristics of the material. Concerning the biological activities, the treated CS-films scavenged around 60% of DPPH radical while the control CS-film exhibited a negligible antioxidant activity. Finally, the CS-films containing pelargonium and thyme EOs exhibited the strongest antibiofilm-forming activity against Escherichia coli, Enterococcus hirae, Staphylococcus aureus, and Pseudomonas aeruginosa with values of inhibition greater than 70%. These encouraging results verify the effectiveness of CS-films containing EOs such as pelargonium and thyme EOs as biodegradable and bioactive packaging.

The effect of essential oils mixture on chitosan-based film surface energy and antiadhesion activity against foodborne bacteria.

In the food sector, the formation of biofilms as a result of microbial adherence on food-grade surfaces causes a major problem resulting in significant economic losses. Thereby, this work aimed to elaborate a biodegradable film using chitosan (CS-film) and reinforce its antiadhesion activity by incorporating pelargonium, clove, thyme, and cinnamon essential oils (EOs). Firstly, the antibacterial activity of these EOs alone and combined against four foodborne bacteria were analyzed by the microdilution method. Synergism was observed in the case of EOs combination. Secondly, the physicochemical characteristics and antiadhesion behavior of the CS-films were assessed by the contact angle method and ESEM, respectively. Results revealed that the EOs mixture treatment impacted considerably the physicochemical characteristics of the CS-film and reduced its qualitative and quantitative hydrophobicity. Moreover, the treated CS-film showed a strong antiadhesion behavior against Enterococcus hirae, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus with percentages of non-covered surface equal to 97.65 ± 1.43%, 98.76 ± 0.32%, 99.68 ± 0.28%, and 95.63 ± 1.32% respectively. From all these results, the CS-film treated with the mixture of EOs presents a great potential for application as surface coating and food packaging preventing microbial adhesion and thus, avoiding food contamination and spoilage.

Assessment of the antioxidant, antimicrobial and antibiofilm activities of essential oils for potential application of active chitosan films in food preservation.

In the food industry, the development of microbial biofilms is a serious problem that leads to the contamination and deterioration of food products. To overcome that, our aim consists of searching for natural antimicrobial and non-toxic compounds (essential oils EOs), which might be used alone or adsorbed on natural biopolymer films (chitosan). In this work, the antioxidant activity of eight EOs was evaluated by DPPH radical-scavenging method while their antibacterial activity was determined by diffusion on agar and microdilution methods. Among all tested EOs, Eugenia caryophyllus, Cinnamomum zeylanicum Blume and Thymus satureioides Cosson showed high antioxidant activities at the concentration of 25.6 mg/mL, with respective values of (86.26%, 81.75%, and 76%), and strong antibacterial activity against Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, and Enterococcus hirae, with (MIC) values ≤ 4 µL/mL. At the concentration of 1 µL/mL, these EOs tested alone, showed values of antibiofilm-forming activity ranging from 79.43 to 99.33% and from 44.18 to 94.17%, when they are adsorbed onto chitosan film. These promising results confirm that these three EOs have a good potential for an eventual application in the food industry, as antimicrobial and antioxidant agents, or as active biodegradable food packaging, if combined with chitosan.

The Effect of Different Vegetable Oils on Cedar Wood Surface Energy: Theoretical and Experimental Fungal Adhesion.

Despite having been used for ages to preserve wood against several effects (biological attack and moisture effects) that cause its degradation, the effect of vegetable oils on the cedar wood physicochemical properties is poorly known. Thus, in this study, the hydrophobicity, electron-acceptor (γ +), and electron-donor (γ -) properties of cedar wood before and after treatment with vegetable oils have been determined using contact angle measurement. The cedar wood has kept its hydrophobic character after treatment with the different vegetable oils. It has become more hydrophobic quantitatively with values of surface energy ranged from -25.84 to -43.45 mJ/m2 and more electron donors compared to the untreated sample. Moreover, the adhesion of four fungal strains (Penicillium commune (PDLd"), Thielavia hyalocarpa, Penicillium commune (PDLd10), and Aspergillus niger) on untreated and treated cedar wood was examined theoretically and experimentally. For untreated wood, the experimental adhesion showed a positive relationship with the results obtained by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) approach which found that all fungal strains could adhere strongly to the cedar wood material. In contrast, this relationship was not always positive after treatment. The Environmental Scanning Electron Microscopy (ESEM) has shown that P. commune (PDLd10) and A. niger were found unable to adhere to the wood surface after treatment with sunflower and rapeseed oils. In addition, the results showed that the four fungal strains' adhesion was decreased with olive and linseed oils treatment except that of P. commune (PDLd10) treated with linseed oil.

Alcaligenes aquatilis GTE53: Phosphate solubilising and bioremediation bacterium isolated from new biotope "phosphate sludge enriched-compost".

The isolation and identification of beneficial bacteria from the active phase of composting is considered to be a key bio-quality parameter for the assessment of the process. The aim of this work was the selection and identification of beneficial bacteria from a co-composting experiment of vegetable waste (VW), olive oil mill waste (O2MW), and phosphate sludge (PS). Phosphate-solubilizing strains were isolated from the thermophilic phase using Pikovskaya (PVK) solid medium supplemented with tricalcium phosphate Ca3(PO4) (TCP) as the sole source of phosphorus (P). Therefore, the selected isolate Alcaligenes aquatilis GTE53 was tested to tolerate abiotic stresses (different levels of temperature, variable pH, high salinity and water stress). The isolate was also assessed for indole acetic acid (IAA) and siderophores synthesis, nitrogen fixation, phenol degradation and pathogens inactivation. The quality of the co-composting process was also investigated by monitoring the physico-chemical parameters. The obtained results showed that A. aquatilis GTE53 displayed a higher solubilization index of 2.4 and was efficiently dissolved, up to 162.8 and 247.4 mg·mL-1 of inorganic phosphate from PS and phosphate rock (PR), respectively. A. aquatilis GTE53 exhibited siderophores and IAA release, along with atmospheric nitrogen fixation. In addition to that, A. aquatilis GTE53 showed a high resistance to heat and tolerance to acidic and alkaline pH, high salinity and water stress. Moreover, A. aquatilis GTE53 could degrade 99.2% of phenol from a high-concentrated medium (1100 mg·L-1 of phenol) and can inactivate the most abundant pathogens in industrial wastes: Escherichia coli, Streptococcus sp., Salmonella sp., and Fusarium oxysporum albedinis. Analysis of temperature, pH, electrical conductivity, carbon/nitrogen (C/N) ratio, indicated successful co-composting. An efficient transformation of P to the available form and a great abatement of polyphenols, were also recorded during the process. The findings of this study will help to advance the understanding of A. aquatilis GTE53 functions and will facilitate its application to promote beneficial microbial organisms during composting, thus obtaining a high-quality product.

Wicherhamomyces anomalus biofilm supported on wood husk for chromium wastewater treatment.

A Wickeramomyces anomalus biofilm supported on wood husk was used to remediate water bodies contaminated with chromium (Cr), in batch and open systems. The favorable adhesion ability of the chromium-resistant yeast strain on the wood husk was predicted by XDLVO theory and confirmed by environmental scanning electronic microscopy. The chromium decontamination was then optimized in a batch mode using a central composite design (CCD). Analysis of variance (ANOVA) showed a high coefficient of determination (R2) value of 0.93-0.91 for Cr(VI) and total Cr removal, respectively, ensuring a satisfactory fitting of the second-order regression model to the experimental data. In batch system, the concentration of biomass exhibited the minimal effect on the process. An acidic pH of 3.72 and 5.48, an initial chromium concentration of 10 and 16.91 mg/L and a support dose of 6.95 and 8.20 g/L were optimal for Cr(VI) and total Cr removal, respectively. The breakthrough curves were determined in open system for different initial chromium concentrations. The study of glucose concentration effect on the yeast extracellular polymeric substances (EPS) production showed that a medium exempt of glucose allowed maximal EPS production and minimal chromium removal efficiency, while 20 g/L glucose concentration of presented the optimal condition for chromium removal.