RESUMO
In this work, molecular descriptors of N-(1-(2-bromobenzoyl)-4-cyano-1H-pyrazol-5-yl) halogenated benzamides (1a-h) have been computed using a quantum chemical technique through DFT. Prior work involved the synthesis of compounds (1a-h) and the assessment of their anticancer activity on breast, colon, and liver tumors: MCF-7, HCT-116, and HepG-2 cell lines respectively. Since 1a, 1b, and 1d showed the most potential anticancer impact, their ability to inhibit EGFRWT was investigated. Based on the biological data, 1b inhibited EGFRWT the most. According to the docking evaluation, an H-bond with the threonine residue was one of the main non-covalent contacts between 1b and the EGFRWT active site residues. PES, MESP, HOMOs, LUMOs, energy band gap, global reactivity indices [electron affinity (A), ionization energies (I), electrophilicity index (ω), nucleophilicity index (ε), chemical potential (µ), electronegativity (χ), hardness (η), and softness (S)], condensed Fukui functions, NBO, and NCIs are the molecular descriptors of 1a-h that were computed using DFT technique. According to the theoretical investigation results, compounds (1a-h) might have anticancer effects; these findings are consistent with the biological findings from our previous research. Compound 1b had the lowest binding energy, according to an assessment of the binding energies between the threonine and the three most active compounds (1a, 1b, and 1d). This is consistent with the outcomes of the docking study and the biological examination of the influence of 1a, 1b, and 1d on EGFRWT.
Assuntos
Antineoplásicos , Teoria da Densidade Funcional , Receptores ErbB , Simulação de Acoplamento Molecular , Pirazóis , Humanos , Pirazóis/química , Pirazóis/farmacologia , Pirazóis/síntese química , Receptores ErbB/metabolismo , Receptores ErbB/química , Receptores ErbB/antagonistas & inibidores , Antineoplásicos/farmacologia , Antineoplásicos/química , Antineoplásicos/síntese química , Benzamidas/química , Benzamidas/farmacologia , Benzamidas/síntese química , Linhagem Celular Tumoral , Ligação de HidrogênioRESUMO
The aquatic plant water hyacinth was dried then cross-linked with sodium alginate to produce ionic cross-linked microspheres. The mechanism of controlling cadmium (Cd) and lead (Pb) in wastewater was tested by DFT at B3LYP level using LANL2DZ basis set. Modeling results indicated that the hydrated metals could interact with sodium alginate (SA)/water hyacinth (WH) microspheres through hydrogen bonding. Adsorption energies showed comparable results while total dipole moment and HOMO/LUMO band gap energy showed slight selectivity towards the remediation of Pb. FTIR spectra of cross-linked microspheres indicated that WH is forming a composite with SA to change its structure into a microsphere to remove Cd and Pb from water. Raman mapping revealed that the active sites along the surface of the microspheres enable for possible adsorption of metals through its surface. This finding is supported by molecular electrostatic potential and optical confocal microscopy. Atomic absorption spectroscopy results confirmed that the microspheres are more selective for Pb than Cd. It could be concluded that WH cross-linked with SA showed the potential to remove heavy metals through its unique active surface as confirmed by both molecular modeling and experimental findings.
Assuntos
Alginatos , Cádmio , Chumbo , Microesferas , Águas Residuárias , Poluentes Químicos da Água , Purificação da Água , Alginatos/química , Cádmio/química , Chumbo/química , Chumbo/isolamento & purificação , Poluentes Químicos da Água/química , Águas Residuárias/química , Adsorção , Purificação da Água/métodos , Eichhornia/química , Análise Custo-BenefícioRESUMO
This study examined the functionalization of graphene with easily ionizable elements, such as lithium, and subsequently its interaction with the biopolymer sodium alginate (SA), to highlight its potential for biomedical applications. Utilizing Density Functional Theory (DFT), the research comprehensively investigated the structural, electronic, and spectroscopic properties of these graphene-based composites. The electronic properties of functionalized graphene were investigated using DFT at the B3LYP/6-31G(d,p) level. Among the various configurations studied, graphene exhibited weak interaction with two lithium atoms, displaying the highest reactivity in terms of total dipole moment (TDM) at 5.967 Debye and a HOMO/LUMO energy gap (ΔE) of 0.748 eV. Electrostatic potential mapping revealed that graphene when enhanced with lithium and three units of SA, exhibited an augmented potential density on its surface, a finding corroborated by other investigated physical properties. Notably, the configuration of graphene/3SA/Li, with weak interaction occurring at two side carbons, demonstrated the highest reactivity with a TDM of 15.509 Debye and ΔE of 0.280 eV. Additionally, a shift in the spectral characteristics of graphene towards lower wavenumbers was observed as lithium and SA interacted with the graphene substrate. The PDOS plot for Graphene/3SA/Li, showed the highest contribution in the HOMO orbitals was equally from lithium, sodium, hydrogen, and oxygen, while the lowest contribution was from carbon. This computational analysis provides comprehensive insights into the functionalized graphene systems, aiding in their further development and optimization for practical biomedical use.
RESUMO
This groundbreaking research delves into the intricate molecular interactions between MXene and trihalomethanes (THs) through a comprehensive theoretical study employing density-functional theory (DFT). Trihalomethanes are common carcinogenic chlorination byproducts found in water sanitation systems. This study focuses on a pristine MXene [Mn+1·Xn] monolayer and its various terminal [Tx] functional groups [Mn+1·XnTx], strategically placed on the surface for enhanced performance. Our investigation involves a detailed analysis of the adsorption energies of THs on different MXene types, with the MXene-Cl layer emerging as the most compatible variant. This specific MXene-Cl layer exhibits remarkable properties, including a total dipole moment (TDM) of 12.443 Debye and a bandgap of 0.570 eV, achieved through meticulous geometry optimization and computational techniques. Notably, THs such as trichloromethane (CHCl3), bromide-chloromethane (CHBrCl2), and dibromochloromethane (CHBr2Cl) demonstrate the highest TDM values, indicating substantial changes in electronic and optical parameters, with TDM values of 16.363, 15.998, and 16.017 Debye, respectively. These findings highlight the potential of the MXene-Cl layer as an effective adsorbent and detector for CHF3, CHClF2, CHCl3, CHBrCl2, and CHBr2Cl. Additionally, we observe a proportional increase in the TDM and bandgap energy, indicative of conductivity, for various termination atom combinations, such as Mxene-O-OH, Mxene-O-F, Mxene-O-Cl, Mxene-OH-F, Mxene-F-Cl, and Mxene-OH-Cl, with bandgap energies measured at 0.734, 0.940, 1.120, 0.835, and 0.927 eV, respectively. Utilizing DFT, we elucidate the adsorption energies of THs on different MXene surfaces. Our results conclusively demonstrate the significant influence of the termination atom nature and quantity on MXene's primitive TDM value. This research contributes to our understanding of MXene-THs interactions, offering promising avenues for the development of efficient adsorbents and detectors for THs. Ultimately, these advancements hold the potential to revolutionize water sanitation practices and enhance environmental safety.
RESUMO
A 3-unit cellulose model molecule was built and optimized using DFT B3LYP/6-31G(d,p). The electronic properties of the optimized structure of cellulose were investigated in terms of total dipole moment (TDM), HOMO-LUMO band gap (ΔE), and molecular electrostatic potential (MESP). Cellulose demonstrated a TDM of 9.106 Debye and ΔE of 7.647 eV. The hydrogen atom of the hydroxyl group of the CH2OH group of each cellulose unit was replaced by an alkali metal atom (X) such that the 3-unit cellulose once had 1X atom, then 2X, then 3X atoms, where X = Li, Na or K, both without and with 2, 4 and 6 water molecules (W), respectively, to study also the effect of hydration. Without hydration, the values of TDM decreased for all of the proposed interaction, but increased with hydration, while ΔE decreased in all interactions, confirming that interaction cellulose-alkali metal interaction, especially with hydration, resulted in more reactive structures. Mapping of HOMO-LUMO and MESP indicated significant change in the electron density distribution around cellulose under the effect of interaction with the alkali metals, both with and without hydration. The plots of projected density of states also clearly demonstrated the contribution of each alkali metal as well as water in the molecular orbitals, reflecting their effect on the electronic properties of cellulose and cellulose-alkali metals composites. The theoretical calculations were experimentally verified using FTIR and FT-Raman spectroscopy.
RESUMO
Nanoparticles have substantially contributed to the field of skincare products with ultraviolet (UV) filters to preserve human skin from sun damage. Thus, the current study aims to develop new polymer nanocomposites for the efficient block of UV light that results from the stratospheric ozone layer loss. Co-precipitation method was used to successfully synthesis CuO@ZnO core/shell NPs with a well-crystalline monoclinic CuO core and wurzite ZnO shell. Using the casting method, core/shell NPs were successfully introduced to carboxymethyl cellulose sodium (CMC). The CMC nanocomposites displayed considerably broader optical response extending from near-ultraviolet to visible light, which was likely due to heterojunction between the p-CuO core and n-ZnO shell and defects originating from the synthetic process. The transmittance of pure CMC in the UV, visible, and near IR regions is significantly reduced with the addition of 2 and 4 wt% of CuO@ZnO core/shell NPs to CMC. 99% of UV light is absorbed when 4 wt% of CuO@ZnO core/shell NPs are added. The addition of different concentrations of CMC nanocomposite to one of the sunblock in Egyptian market were studied and showing the highest Sun Protection Factor of 22. Moreover, optical dispersion parameters and refractive index were improved strongly with core/shell NPs addition.
RESUMO
Carbon doped ZnO nanoparticles have been synthesized from the thermal decomposition of Zinc citrate precursor. The precursor was synthesized from semi-solid paste and then subjected to calcination at 700 °C to produce ZnO nanoparticles. The precursor and ZnO were characterized by Fourier Transform Infrared Spectroscopy, UV-visible (UV-Vis) spectra, Transmission Electron Microscope, Field Emission Scanning Electron Microscope, Energy Dispersive Analysis by X-ray (EDAX), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results ensured the formation of hexagonal 2D-ZnO nanoparticles with a layer thickness of 25 nm. The optical band gap of ZnO was determined and found to be 2.9 eV, which is lower than the bulk. Photocatalytic degradation of Fluorescein dye as an anionic dye and Rhodamine B as a cationic dye was evaluated via C-ZnO NPs under UV irradiation. ZnO displayed 99% degradation of Fluorescein dye after 240 min and a complete photocatalytic degradation of Rhodamine B dye after 120 min under UV irradiation.
RESUMO
Ternary silicate glass (69SiO2-27CaO-4P2O5) was synthesized with the sol-gel route, and different percentages of germanium oxide GeO2 (6.25, 12.5, and 25%) and polyacrylic acid (PAA) were added. DFT calculations were performed at the B3LYP/LanL2DZ level of theory for molecular modelling. X-ray powder diffraction (XRPD) was used to study the effect of GeO2/PAA on the structural properties. The samples were further characterized using DSC, ART-FTIR, and mechanical tests. Bioactivity and antibacterial tests were assessed to trace the influence of GeO2 on biocompatibility with biological systems. Modelling results demonstrate that molecular electrostatic potential (MESP) indicated an enhancement of the electronegativity of the studied models. While both the total dipole moment and HOMO/LUMO energy reflect the increased reactivity of the P4O10 molecule. XRPD results confirmed the samples formation and revealed the correlation between the crystallinity and the properties, showing that crystalline hydroxyapatite (HA) is clearly formed in the highest percentages of GeO2, proposing 25% as a strong candidate for medical applications, consistent with the results of mechanical properties and the rest of the characterization results. Simulated body fluid (SBF) in vitro experiments showed promising biocompatibility. The samples showed remarkable antimicrobial and bioactivity, with the strongest effect at 25%. The experimental findings of this study revealed that the incorporation of GeO2 into the glass in terms of structural characteristics, bioactivity, antimicrobial properties, and mechanical properties is advantageous for biomedical fields and especially for dental applications.
Assuntos
Líquidos Corporais , Vidro , Silicatos/farmacologia , Antibacterianos/farmacologia , PósRESUMO
Bioactive glass (BG) was prepared by sol-gel method following the composition 60-([Formula: see text]) SiO2.34CaO.6P2O5, where x = 10 (FeO, CuO, ZnO or GeO). Samples were then studied with FTIR. Biological activities of the studied samples were processed with antibacterial test. Model molecules for different glass compositions were built and calculated with density functional theory at B3LYP/6-31 g(d) level. Some important parameters such as total dipole moment (TDM), HOMO/LUMO band gap energy (ΔE), and molecular electrostatic potential beside infrared spectra were calculated. Modeling data indicated that P4O10 vibrational characteristics are enhanced by the addition of SiO2.CaO due to electron rush resonating along whole crystal. FTIR results confirmed that the addition of ZnO to P4O10.SiO2.CaO significantly impacted the vibrational characteristics, unlike the other alternatives CuO, FeO and GeO that caused a smaller change in spectral indexing. The obtained values of TDM and ΔE indicated that P4O10.SiO2.CaO doped with ZnO is the most reactive composition. All the prepared BG composites showed antibacterial activity against three different pathogenic bacterial strains, with ZnO-doped BG demonstrating the highest antibacterial activity, confirming the molecular modeling calculations.
Assuntos
Dióxido de Silício , Óxido de Zinco , Óxido de Zinco/farmacologia , Antibacterianos/farmacologia , ÓxidosRESUMO
Polytetrafluoroethylene (PTFE) is one of the most significant fluoropolymers, and one of the most recent initiatives is to increase its performance by using metal oxides (MOs). Consequently, the surface modifications of PTFE with two metal oxides (MOs), SiO2 and ZnO, individually and as a mixture of the two MOs, were modeled using density functional theory (DFT). The B3LYPL/LANL2DZ model was used in the studies conducted to follow up the changes in electronic properties. The total dipole moment (TDM) and HOMO/LUMO band gap energy (∆E) of PTFE, which were 0.000 Debye and 8.517 eV respectively, were enhanced to 13.008 Debye and 0.690 eV in the case of PTFE/4ZnO/4SiO2. Moreover, with increasing nano filler (PTFE/8ZnO/8SiO2), TDM changed to 10.605 Debye and ∆E decreased to 0.273 eV leading to further improvement in the electronic properties. The molecular electrostatic potential (MESP) and quantitative structure activity relationship (QSAR) studies revealed that surface modification of PTFE with ZnO and SiO2 increased its electrical and thermal stability. The improved PTFE/ZnO/SiO2 composite can, therefore, be used as a self-cleaning layer for astronaut suits based on the findings of relatively high mobility, minimal reactivity to the surrounding environment, and thermal stability.
Assuntos
Nanocompostos , Óxido de Zinco , Óxido de Zinco/química , Dióxido de Silício/química , Relação Quantitativa Estrutura-Atividade , Politetrafluoretileno/químicaRESUMO
A synergistic interaction between reduced graphene oxide (rGO) and a biodegradable natural polymer, sodium alginate, was developed to create unique microspheres with protruding spiky features at the surface (spiky microspheres) that act as a super encapsulation and sustained release system for the highly effective antibiotic cefotaxime. Three forms of microspheres, namely alginate (Alg), alginate-cefotaxime (Alg-CTX), and alginate-cefotaxime-reduced graphene (Alg-CTX-rGO) composites, were prepared using calcium chloride as a cross-linking agent. The microspheres were characterized using field emission scanning electron microscopy (FESEM), Fourier-transform infrared (FT-IR) spectroscopy, and X-ray diffraction to investigate their pores, roughness, surface morphology, functional groups, phase formation, purity, and structural properties. The membrane diffusion method was employed to determine the release profile of Cefotaxime from the fabricated microspheres. The antibacterial activities of CTX solution, Alg microspheres, Alg-CTX microspheres, and Alg-CTX-rGO microspheres were investigated against gram-negative bacteria (Escherichia coli) using the agar diffusion method on Muller-Hinton agar. The prepared samples exhibited excellent results, suggesting their potential for enhanced antibiotic delivery. The results demonstrated the potential of the microsphere 2D rGO/alginate matrix for enhancing cefotaxime delivery with an unusual, prolonged release profile.
RESUMO
Nanoparticles have made a substantial contribution to the field of skincare products with UV filters in preserving human skin from sun damage. The current study aims to create new polymer nanocomposite filters for the efficient block of UV light that results from the stratospheric ozone layer loss. The casting approach was used to add various mass fractions of copper oxide nanoparticles (CuO-NPs) to a solution of carboxymethyl cellulose (CMC). The amorphous nature of CMC was revealed by XRD analysis, with the intensity of the typical peak of virgin polymer in the nanocomposite spectrum decreasing dramatically as the doping amount was increased. The FTIR spectra revealed the functional groups of CMC and the good interaction between the CMC chain and CuO-NPs. Optical experiments revealed that the optical transmittance of pure CMC was over 80%, whereas it dropped to 1% when CuO-NPs content was increased to 8 wt.%. Surprisingly, the inclusion of CuO-NPs considerably improved the UV blocking property of the films extended from the UV region (both UV-A: 320-400 nm and UV-B: 280-320 nm) to the visible region. Optical band gap of CMC decreased sharply with increasing CuO concentration. The tunable optical characteristics can be utilized in UV- blocking filters and various optoelectronics applications.
RESUMO
There are many challenges faced the soft tissue adhesives in the medical application field. For example, there is a limited effective binding between the medical adhesive and different types of soft tissues. Chitosan (CS) and dopamine (DA) were used as structural units for synthesizing nanocomposites utilized as a wet tissue adhesive. To produce dopamine-chitosan-iron oxide nanocomposites (DA-CS-Fe3O4 NCs), DA was loaded onto chitosan-iron oxide nanocomposites. The nanocomposites have been prepared using ionic gelation method under vigorous homogenization and characterized by different techniques. Fourier-transform infrared spectroscopy (FTIR) have shown that DA-CS- Fe3O4 NCs could attach to the tissue through two possible functional groups, namely, the catechol and amine groups. The results of in vitro scratch wound-healing assay suggested that the prepared DA-CS- Fe3O4 NCs facilitate cell migration (the wound-closure percentage reached 96% at 72 h). All experimental results confirm that DA-CS- Fe3O4 NCs are strongly recommended for use as a soft medical tissue adhesive in wound healing and surgeries such as vascular surgery. In addition, the results of the whole blood clotting, antibacterial assessment, live and dead assay, cytotoxicity test, and wound-healing assay indicate that DA-CS-Fe3O4 NCs can be used as a multifunctional biomedical adhesive.
Assuntos
Quitosana , Nanocompostos , Adesivos Teciduais , Quitosana/química , Dopamina , Antibacterianos/farmacologia , Antibacterianos/química , Cicatrização , Nanocompostos/químicaRESUMO
Due to modern industrialization and population growth, access to clean water has become a global challenge. In this study, a metal-semiconductor heterojunction was constructed between Cu NPs and the Co0.5Ni0.5Fe2O4/SiO2/TiO2 composite matrix for the photodegradation of potassium permanganate, hexavalent chromium Cr(VI) and p-nitroaniline (pNA) under UV light. In addition, the electronic and adsorption properties after Cu loading were evaluated using density functional theory (DFT) calculations. Moreover, the antimicrobial properties of the prepared samples toward pathogenic bacteria and unicellular fungi were investigated. Photocatalytic measurements show the outstanding efficiency of the Cu-loaded nanocomposite compared to that of bare Cu NPs and the composite matrix. Degradation efficiencies of 44% after 80 min, 100% after 60 min, and 65% after 90 min were obtained against potassium permanganate, Cr(VI), and pNA, respectively. Similarly, the antimicrobial evaluation showed high ZOI, lower MIC, higher protein leakage amount, and cell lysis of nearly all microbes treated with the Cu-loaded nanocomposite.
Assuntos
Nanocompostos , Poluentes Químicos da Água , Antibacterianos/farmacologia , Catálise , Luz , Permanganato de Potássio , Dióxido de Silício , Titânio/farmacologia , Raios UltravioletaRESUMO
The growth of the textile industry results in a massive accumulation of dyes on water. This enormous rise in pigments is the primary source of water pollution, affecting the aquatic lives and our ecosystem balance. This study aims to notify the fabrication of neodymium incorporated copper oxide (Nd2O3 doped CuO) nanoparticles by combustion method for effective degradation of dye, methylene blue (MB). X-ray diffraction (XRD), Field emission Scanning electron microscopy (FESEM), Zeta potential have been applied for characterization. Photocatalyst validity has been evaluated for methylene blue degradation (MB). Test conditions such as time of contact, H2O2, pH, and photo-Fenton have been modified to identify optimal degradation conditions. Noticeably, 7.5% Nd2O3 doped CuO nanoparticle demonstrated the highest photocatalytic efficiency, up to 90.8% in 80 min, with a 0.0227 min-1 degradation rate. However, the photocatalytic efficiency at pH 10 becomes 99% with a rate constant of 0.082 min-1. Cyclic experiments showed the Nd2O3 doped CuO nanoparticle's stability over repeated use. Scavenge hydroxyl radical species responsible for degradation using 7.5% Nd2O3 doped CuO nanoparticles have been investigated under visible irradiation.
RESUMO
The incorporation of tungsten trioxide (WO3) by various concentrations of graphitic carbon nitride (g-C3N4) was successfully studied. X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and Diffused Reflectance UV-Vis techniques were applied to investigate morphological and microstructure analysis, diffused reflectance optical properties, and photocatalysis measurements of WO3/g-C3N4 photocatalyst composite organic compounds. The photocatalytic activity of incorporating WO3 into g-C3N4 composite organic compounds was evaluated by the photodegradation of both Methylene Blue (MB) dye and phenol under visible-light irradiation. Due to the high purity of the studied heterojunction composite series, no observed diffraction peaks appeared when incorporating WO3 into g-C3N4 composite organic compounds. The particle size of the prepared composite organic compound photocatalysts revealed no evident influence through the increase in WO3 atoms from the SEM characteristic. The direct and indirect bandgap were recorded for different mole ratios of WO3/g-C3N4, and indicated no apparent impact on bandgap energy with increasing WO3 content in the composite photocatalyst. The composite photocatalysts' properties better understand their photocatalytic activity degradations. The pseudo-first-order reaction constants (K) can be calculated by examining the kinetic photocatalytic activity.
RESUMO
The surface of pure polytetrafluoroethylene (PTFE) microfibers was modified with ZnO and graphene (G), and the composite was studied using ATR-FTIR, XRD, and FESEM. FTIR results showed that two significant bands appeared at 1556 cm-1 and 515 cm-1 as indications for CuO and G interaction. The SEM results indicated that CuO and G were distributed uniformly on the surface of the PTFE microfibers, confirming the production of the PTFE/CuO/G composite. Density functional theory (DFT) calculations were performed on PTFE polymer nanocomposites containing various metal oxides (MOs) such as MgO, Al2O3, SiO2, TiO2, Fe3O4, NiO, CuO, ZnO, and ZrO2 at the B3LYP level using the LAN2DZ basis set. Total dipole moment (TDM) and HOMO/LUMO bandgap energy ΔE both show that the physical and electrical characteristics of PTFE with OCu change to 76.136 Debye and 0.400 eV, respectively. PTFE/OCu was investigated to observe its interaction with graphene quantum dots (GQDs). The results show that PTFE/OCu/GQD ZTRI surface conductivity improved significantly. As a result, the TDM of PTFE/OCu/GQD ZTRI and the HOMO/LUMO bandgap energy ΔE were 39.124 Debye and ΔE 0.206 eV, respectively. The new electrical characteristics of PTFE/OCu/GQD ZTRI indicate that this surface is appropriate for electronic applications.
RESUMO
Fluorinated ethylene propylene (Teflon FEP) was used as external layer thermal insulator for Hubble Space Telescope (HST) and on the outside surfaces of space crafts in the low earth orbit (LEO). Teflon FEP was eroding as a result of exposure to atomic oxygen (AO) and different electromagnetic waves such as ultraviolet radiation and X-ray. Model molecules were used to simulate Teflon FEP and its interaction with other nanoparticles such as ZnO and SiO2. Density functional theory (DFT) was used to calculate model structures using B3LYP/LAN2DZ model. Molecular electrostatic potential as contour, band gap energy, and total dipole moment were computed for all models. Thermal stability properties were also studied for Teflon FEP both individually and interacted with ZnO and SiO2. Results showed that a layer of OZn and SiO2 on Teflon FEP, especially Teflon FEP + OZn + OSiO structure, improves the physical, chemical, thermal, and electrical stability of Teflon FEP, potentially acting as a corrosion-inhibiting layer.
RESUMO
Recently, scientific research has confirmed that a single polymer material cannot meet the ambitions of all surgical requirements. Thus, combinations of different types of polymeric materials are used in order to manufacture different suture materials. A copolymer of Polyglycolide (PGA) and trimethylene carbonate (TMC) is one of the simplest bioabsorbable monofilament sutures. The optical properties of PGA/TMC copolymer surgical suture were investigated by using multiple-beam interferometric of Fizeau type. The mechanical properties were measured by a suture-drawing apparatus attached to the multiple-beam interferometric system. The refractive indices, stress-strain curve, elastic shear modulus, Young's modulus and crosslink density were investigated for the PGA/TMC surgical suture at various draw ratios. The biological activities were conducted by Quantitative Structure Activity Relationships (QSAR) descriptors. Molecular Electrostatic Potential (MESP) maps were used to describe the reactivity and functional active sites for the given molecule. The behavior of stress-strain curve confirms the compatibility of the suture with the sternum which proves that this suture is a good candidate for cardiac operations. RESEARCH HIGHLIGHTS: Fizeau fringes is accurate in characterizing properties of PGA/TMC surgical suture. The biological activities were conducted by (QSAR) descriptors. The compatibility measurements lead to it is a good candidate for cardiac operations.
Assuntos
Engenharia Tecidual , Dioxanos , Poliésteres , Ácido PoliglicólicoRESUMO
Green routes for remediation of heavy metals are worldwide challenges to overcome pollution problems on one hand and control the adverse impact of chemicals on the other hand. Biosorption is one of the most effective methods for removing lower level of heavy metals. The idea to apply natural resources as a green method for removal of heavy metals, this route has no adverse impacts on the environment. This study investigated the ability of chemically modified Ziziphus spina-christi stones (ZSCs) as agriculture by-products to perform the biosorption of Pb(II), Zn(II) and Cd(II) ions from wastewater in a single and ternary metal system. The characteristic functional groups of chemically modified ZSCs were analyzed by Fourier transform infrared. In comparison with acidic ZSCs, alkali-modified ZSCs by KOH was more effective and enhanced the removal efficiency of ZSCs. Using Langmuir isotherm, the maximum adsorption capacity on the modified ZSCs for Pb(II) was 9.06 mg/g, for Zn(II) obtained by using ZSC-citric acid was 4.19 mg/g and 5.38 mg/g for Cd(II) as obtained by using ZSC-H2O2. The molecular electrostatic potential, which was calculated at B3LYP/6-31G(d,p), indicated that each metal is di-hydrated, forming a complex with two units of amino acids. This mechanism demonstrated the uptake process by ZSCs.