RESUMO
The presence of chromium [Cr(VI)] and lead [Pb(II)] ions in the water bodies have adverse effects on humans and aquatic life. Graphene oxide-based magnetic nanocomposites synthesized in the presence of chitosan (mGO/CS) or polyaniline (mGO/PA) as potential adsorbents for the removal of Cr(VI) and Pb(II) ions. The FTIR (Fourier transform infrared spectroscopy), EDX (Energy dispersive X-ray), XRD (X-ray diffraction) and SEM (Scanning electron microscopy) were employed to investigate the chemical composition, structural, elemental analysis, crystalline size and morphology of the nanocomposites. The FTIR results confirmed the synthesis of the nanocomposites by detecting peaks of specific functional groups. The average crystallite sizes of the mGO, mGO/CS, and mGO/PA nanocomposites were 17, 25, and 23 (nm), respectively, as determined by the Debye-Scherrer equation from the XRD data. Batch adsorption experiments were conducted for Pb(II) and Cr(VI) removal by varying the variables like pH, concentration of metal ions and contact time. The Box Behnken design (BBD) was used to optimize the adsorption parameters. Under the optimum conditions, mGO/CS and mGO/PA showed maximum removal percentages (%R) of 92.36 and 98.7 for Pb(II), and 85.25 and 93.08 for Cr(VI), respectively. The adsorption capacities were 110.84 and 118.44 mg/g for Pb(II), and 87.74 and 111.7 mg/g for Cr(VI) were obtained for mGO/CS and mGO/PA, respectively. The pseudo-second-order kinetic model and Langmuir isotherm fitted well to the experimental data and explain the adsorption mechanism of the nanocomposite materials for both metal ions.
RESUMO
In this study, nickel manganite (NiMn2O4) nanoparticles were prepared using a hydrothermal method and examined its potential as a photocatalyst for the Acid Green 25 (AG-25) dye degradation. The nanoparticles were subjected to structural analysis using X-ray diffraction (XRD) and morphological analysis using scanning electron microscopy (SEM). The study examined the kinetics and thermodynamics of degradation processes that are catalyzed by photocatalysis. To ascertain their effect on dye degradation, several parameters, such as catalyst dose, H2O2 concentration, and temperature, were investigated. With a temperature of 315 K in a pseudo-first-order kinetic reaction, a 0.3 M H2O2 concentration, 0.05 mg/mL catalyst dose, and a promising removal efficiency of 96 % was achieved by the NiMn2O4 NPs in 40 min. Thermodynamic analysis revealed the spontaneous and entropy-driven nature of catalytic degradation, progressing favorably at elevated temperatures. Additionally, the NiMn2O4 NPs were applied as a fuel additive to analyze its influence on combustion and the physical characteristics of the modified fuel. The modified fuel demonstrated exceptional catalytic efficiency, emphasizing the potential of the NiMn2O4 NPs as an effective additive.
RESUMO
The escalating threat of drug-resistant microbes underscores the urgent need for novel antimicrobial agents. In response, considerable research effort has been directed towards developing innovative frameworks and strategies to address this challenge. Chalcones, known for their broad-spectrum biological activities, have emerged as promising candidates for combating drug resistance. In this study, a series of 2'-Hydroxychalcones (5a, 5b, 5c, and 5d) with varying electron withdrawing and donating groups were synthesized via Claisen Schmidt condensation. FT-IR, 1H NMR, and 13C NMR analyses were employed to confirm the structure of the synthesized compounds. Subsequent evaluation of the synthesized compounds revealed their potential as antibacterial and antibiofilm agents. Notably, compounds 5a and 5d exhibited potent antibacterial activity against multidrug-resistant (MDR) bacteria E. coli, P. aeruginosa, K. pneumoniae, and S. aureus, surpassing the reference drug Ciprofloxacin (30 µg/mL) and other synthesized compounds. Compound 5d showed a notable 19.5 mm zone of inhibition against K. pneumoniae. Furthermore, 5a (at a concentration of 30 µg) and 5d (at a concentration of 50 µg) exhibited statistically significant (P > 0.05) biofilm inhibition efficacy compared to Ciprofloxacin (30 µg/mL). The synthesized chalcones 5a-5d were also docked via PachDock molecular docking software for Glucosamine-6-phosphate (GlcN-6-P) synthase inhibition and showed that ligand 5a exhibited outstanding results with score 4238 and ACE value -160.89 kcal/mol, consistent with the observed antibacterial activity. These findings underscore the potential of chalcones, particularly 5a and 5d, as promising candidates for the development of new antimicrobial agents targeting drug-resistant microbes and biofilm formation.
RESUMO
Schiff bases of existing antimicrobial drugs are an area, which is still to be comprehensively explored to improve drug efficiency against consistently resisting bacterial species. In this study, we have targeted a new and eco-friendly method of condensation reaction that allows the "green synthesis" as well as improved biological efficacy. The transition metal complexes of cefpodoxime with well-enhanced biological activities were synthesized. The condensation reaction product of cefpodoxime and vanillin was further reacted with suitable metal salts of [Mn (II), Cu (II), Fe (II), Zn (II), and Ni (II)] with 1:2 molar ratio (metal: ligand). The characterization of all the products were carried out by using UV-Visible, elemental analyzer, FTIR, 1H-NMR, ICP-OES, and LC-MS. Electronic data obtained by UV-Visible proved the octahedral geometry of metal complexes. The biological activities Schiff base ligand and its transition metal complexes were tested by using in-vitro anti-bacterial analysis against various Gram-negative, as well as Gram-positive bacterial strains. Proteinase and protein denaturation inhibition assays were utilized to evaluate the products in-vitro anti-inflammatory activities. The in vitro antioxidant activity of the ligand and its complexes was evaluated by utilizing the 2,2-diphenyl-1-picrylhydrazyl (DPPH) in-vitro method. The final results proved metal complexes to be more effective against bacterial microorganisms as compared to respective parent drug as well as their free ligands. Patch Dock, a molecular docking tool, was used to dock complexes 1a-5e with the crystal structure of GlcN-6-P synthase (ID: 1MOQ). According to the docking results, complex 2b exhibited a highest score (8,882; ACE = -580.43 kcal/mol) that is well correlated with a high inhibition as compared to other complexes which corresponds to the antibacterial screening outcomes.
RESUMO
Hydrogels are polymeric structures characterized by their three-dimensional nature, insolubility in aqueous media, and remarkable ability to absorb significant amounts of water. Owing to their exceptional biocompatibility with living tissues, hydrogels find extensive use in various biomedical applications. Guggul gum grafted polyacrylamide hydrogels (SG) were prepared and green synthesized SrO, CoO and SrO-CoO nanoparticles (NPs) were incorporated with hydrogels (SrG, CoG, Sr-CoG) respectively. The fabricated hydrogels were characterized by various analytical techniques such as FTIR, XRD and SEM. XRD results confirmed the presence of Sr and Co metal nanoparticles in the fabricated hydrogels matrix, SrG pattern showed diffraction peaks at 2θ = 30°, 36.59°, 44.11°, 50.22° and 62.20° while CoG peaks appeared at 2θ = 36.59°, 42.32°, 61.18°, 74.05° and 77.08°. SG, SrG, CoG and Sr-CoG hydrogels showed 11%, 32%, 23% and 45% radical scavenging activity respectively as compared to standard BHT (Butylated hydroxyl toluene). In vitro drug release tests results showed that SG, SrG, CoG and Sr-CoG exhibited 21%, 16%, 13% and 10% sustained release of naproxen respectively. The results revealed that SrO and CoO nanoparticles dopped hydrogels possessed good wound healing potential as compared to conventional hydrogels, which provides great potential in clinical treatment for wounds.
Assuntos
Resinas Acrílicas , Preparações de Ação Retardada , Liberação Controlada de Fármacos , Nanopartículas Metálicas , Cicatrização , Resinas Acrílicas/química , Cicatrização/efeitos dos fármacos , Nanopartículas Metálicas/química , Hidrogéis/química , Hidrogéis/síntese química , Cobalto/química , Estrôncio/química , Óxidos/química , Animais , Portadores de Fármacos/químicaRESUMO
This study focuses on the investigation of the significance of polymers in drug delivery approaches. The carboxymethyl cellulose (CMC), polyvinyl alcohol (PVA) and dextrin-based hydrogel membrane were prepared and employed for the sustained release of third-generation oral antibiotic (cefixime). Different proportions of CMC, PVA and dextrin were blended and hydrogel membranes were fabricated via solvent casting method. The prepared membrane was characterized by FTIR, SEM, UV-visible, TGA and swelling analysis. Cefixime drug was incorporated in the CMC/PVA/dextrin matrix and drug release was investigated. The sustained release of the tested drug (cefixime) was investigated and the drug was released in 120 min in the phosphate-buffered saline (PBS) solution. The antibacterial activity of the prepared membrane was promising against Proteus vulgaris, salmonella typhi, Escherichia coli and Bacillus subtilis strains. The swelling capabilities, thermal stability and non-toxic nature of the prepared CMC/PVA/dextrin membrane could have potential applications for cefixime drug in delivery in a controlled way for the treatment of infectious diseases.
RESUMO
Ceftriaxone sodium belongs to the third-generation cephalosporin group and is used intramuscular and intravenous route as a broad-spectrum antibiotic. This research aims to prepare biocompatible hydrogels for targeted delivery of ceftriaxone sodium by parental route. Different proportions of polymers (natural and synthetic) in the presence of cross-linker were synthesized by solvent casting method. Ceftriaxone sodium was loaded in hydrogels in different concentrations and its drug release behavior was evaluated along with swelling and biodegradation analysis. The characterization of hydrogel was done by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) to analyze surface morphology and functional groups involved in the formation of dextrin/Na-alginate/PVA hydrogels loaded with the drug. Thermogravimetric analysis (TGA) was confirmed by thermal stability and degradation pattern of loaded and unloaded hydrogels. The drug-loaded samples presented promising antimicrobial activity against S. aureus and P. multocida and their cytotoxic nature was also studied. Drug release analysis using simulated intestinal fluid (SIF) and phosphate buffer saline(PBS) for the circulatory system shows the consistent release of the drug. The findings unveiled the development of a biocompatible and innovative hydrogel, which has potential advantages for biomedical application, particularly in enhancing the therapeutic efficacy of ceftriaxone sodium drug.
RESUMO
In this study, pure nickel oxide (NiO), manganese ferrite (MnFe2O4 or MFO), and binary nickel oxide/manganese ferrite (NiO/MFO1-4) nanocomposites (NCs) were synthesized using the Sol-Gel method. A comprehensive investigation into their photoluminescence, structural, morphological, magnetic, optical, and photocatalytic properties was conducted. Raman analysis, UV-Vis spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction techniques were used to characterize the materials. The synthesized samples exhibited superparamagnetic behavior, as revealed by our analysis of their magnetic properties. A lower recombination rate was shown by the photoluminescence analysis, which is helpful for raising photocatalytic activity. The photocatalytic activity was evaluated for the degradation of Cresol Red (CR) dye. 91.6% of CR dye was degraded by NiO/MFO-4 nanocomposite, and the NC dosage as well as solution pH affected the photocatalytic performance significantly. In four sequential photocatalytic cycles, the magnetically separable NCs were stable and recyclable. The enhanced photocatalytic activity and magnetic separability revealed the potential application of NiO/MFO-4 as an efficient photocatalyst for the removal of dyes from industrial wastewater under solar light irradiation.
RESUMO
Food authentication and contamination are significant concerns, especially for consumers with unique nutritional, cultural, lifestyle, and religious needs. Food authenticity involves identifying food contamination for many purposes, such as adherence to religious beliefs, safeguarding health, and consuming sanitary and organic food products. This review article examines the issues related to food authentication and food fraud in recent periods. Furthermore, the development and innovations in analytical techniques employed to authenticate various food products are comprehensively focused. Food products derived from animals are susceptible to deceptive practices, which can undermine customer confidence and pose potential health hazards due to the transmission of diseases from animals to humans. Therefore, it is necessary to employ suitable and robust analytical techniques for complex and high-risk animal-derived goods, in which molecular biomarker-based (genomics, proteomics, and metabolomics) techniques are covered. Various analytical methods have been employed to ascertain the geographical provenance of food items that exhibit rapid response times, low cost, nondestructiveness, and condensability.
Assuntos
Contaminação de Alimentos , Animais , Humanos , Análise de Alimentos/métodos , Contaminação de Alimentos/análise , Metabolômica/métodos , Proteômica/métodosRESUMO
In this study, UV-vis spectroscopy was employed to investigate the interaction between formylphenoxyacetic acid (FPAA) and its derivatives (chalcone and flavones) with ionic surfactants (SDS, CTAB, and DTAB) in different physiological environments. Changes in the physiochemical properties of FPAA chalcone and flavones including binding constants, partitioning constants, and Gibbs free energy were observed which were influenced by the presence of ionic surfactants computed using mathematical models. The solubilization of the targeted compounds in the ionic surfactants was determined through the binding constant (Kb). The results of the present study indicated that electrostatic interactions played a significant role in the solubilization of the targeted compounds in SDS, CTAB, and DTAB. At pH 4.1, FPAA chalcone exhibited stronger binding affinity with SDS compared to CTAB and DTAB. However, at pH 7.4, chalcone showed stronger binding with DTAB compared to SDS, while negligible interaction with CTAB was observed at pH 7.4. The flavones demonstrated stronger binding with DTAB at pH 7.4 compared to SDS and CTAB and it exhibited strong bonding with CTAB at pH 4.1. The negative values of the Gibbs free energy for binding (ΔGbË) and partitioning (ΔGpË) constants displayed the spontaneity of the process. However, FPAA chalcone with SDS and FPAA flavones with DTAB furnished positive ΔGbË, indicating a non-spontaneous process.
Assuntos
Flavonas , Solubilidade , Tensoativos , Tensoativos/química , Flavonas/química , Flavonas/metabolismo , Concentração de Íons de Hidrogênio , Cetrimônio/química , Termodinâmica , Íons/química , Chalcona/química , Chalconas/química , Chalconas/metabolismo , Dodecilsulfato de Sódio/química , Eletricidade EstáticaRESUMO
The present research examined patulin's presence across the whole supply chain of selected fruits. A comprehensive analysis was conducted on 442 samples of fruits (oranges, apples, apricots, lemons, and guava) to determine the presence of patulin contamination. This analysis used Liquid Chromatography (HPLC) with a UV detector. The findings indicate that 17, 23, and 28 % of selected fruit samples tested positive for patulin levels in farm, transportation, and market samples. However, the sample collected during the transportation step showed that 56 % (percentage of positive samples) of fruits have patulin levels greater than 50 µg/kg, and 41 % (percentage of positive samples) have greater levels than 50 µg/kg in market samples. The findings of the one-way analysis of variance indicated that no statistically significant variation existed between the amounts of patulin across the various stages of the food supply chain system (p > 0.05). Nevertheless, the analysis of the correlation study, namely Kendall's tau_b and Spearman's rho, denote a robust association between the levels of patulin and the food supply system. The apple samples exhibited the most significant average dietary intake of patulin, with an average value of 0.11 µg/kg bw/day. The maximum mean hazard quotient (HQ) of 0.28 was also recorded. The prevalence and incidence of patulin in specific fruits were found to be relatively high, and it was observed that market samples had elevated levels of patulin in the selected fruits.
RESUMO
The present research investigates the effectiveness of nano-emulsified coatings (C-1, C-2, and C-3) in preserving the kiwifruit at a temperature of 10 ± 2 °C with 90-95 % relative humidity (RH) for 30 days. The nano-emulsions were prepared from varied carboxymethyl cellulose (CMC) concentrations with different combinations of essential oils such as thyme, clove, and cardamom. Dynamic light scattering investigation with Zeta Sizer revealed that C-1, C-2, and C-3 nano-emulsions have nano sizes of 81.3 ± 2.3, 115.3 ± 4.2, and 63.2 ± 3.2 nm, respectively. The scanning electron microscopy images showed that the nanoemulsion of C-1 had homogenous spherical globules, C-2 had voids, and C-3 showed a non-porous structure with uniform dispersion. The X-ray diffraction analysis indicated that C-1, C-2, and C-3 nano-emulsion exhibited distinct crystallinity and peaks. The nano-emulsion C-1 had reduced crystallinity, while C-2 had lower intensity peaks, and C-3 had increased crystallinity. The results documented that compared to control kiwifruit samples, the samples coated with C-3 nano-emulsion have decreased weight loss, decay incidence, soluble solids, maturity index activity, ethylene production, total bacterial count, and increased titratable acid, and firmness attributes. The results of current research are promising and would be applicable in utilization in industrial applications.
Assuntos
Filmes Comestíveis , Óleos Voláteis , Conservação de Alimentos/métodos , Carboximetilcelulose Sódica/química , Temperatura , Emulsões/químicaRESUMO
Chillies are considered a universal ingredient for imparting flavor and pungency to foods. Pakistan stood in the top twenty countries worldwide by producing 82 thousand Tons of chillies during 2022-23. Chilli fungal contamination and aflatoxin production during drying is a common problem during post-harvest process. Gasses treatment and Ionizing radiations are efficient methods for reducing toxigenic and pathogenic microbial growth in food items. The current study was designed to compare the effects of ethylene oxide (ETO), gamma (GB) & electron beam (EB) treatments on two red chilli local cultivars (Kunri and Hybrid) of Pakistan. After treatment, the chilli samples were analyzed for aflatoxins, physicochemical, quality & safety attributes. All results were subjected to Principal Component Analysis (PCA), Hierarchical Cluster Analysis (HCA), dendrogram and ANOVA to check the correlations, grouping and level of significance within the varieties and treatments. The results showed that moisture and water activity mainly designated PC-2 directions and are slightly positively correlated. Conversely, both fat and proteins have a negative correlation with moisture, ash and water activity. Besides, carotenoids and ABTS assay mainly designated PC-2 directions and are slightly positively correlated. Color, flavonoids and TPC also possess positive correlations among them. ETO depicts effectiveness in the reduction of E. coli but is not effective in saving antioxidant potential such as total flavonoids. Similarly, gamma irradiations showed strong reduction trends in fungal and pathogenic count, however same trend was observed in ascorbic acid too. Besides, the electron beam with dosage levels of 12 and 15 kGy has shown effectiveness against Aspergillus spp., aflatoxins and pathogenic microbial load in addition to saving antioxidant potential (phenolics and flavonoids), physicochemical parameters and color values compared to other applied methods especially in Kunri variety. It was evident from the research that varietal combination in addition to applied treatment must be specially considered while designing a treatment for chillies.
RESUMO
The effect of Ga-substitution on bismuth ferrite BiGaxFe1-xO3 (x = 0, 0.05, 0.10, 0.15, 0.20, and 0.25) properties was investigated, which was fabricated using a microemulsion route. X-ray diffraction analysis confirmed that specimens had a single-phase rhombohedral structure with space group R3Ì c. The concentration of Ga had an impact on various properties such as structural parameters, crystalline size, porosity, and unit cell volume. The samples exhibited notable values for the dielectric constant, tangent loss, and dielectric loss in the low-frequency range, which declined as the frequency increased due to different polarizations. The increment in the AC conductivity was associated with rise in frequency. The P-E loops demonstrated that the samples became more resistive as the Ga concentration increased. The retentivity (Mr) and saturation magnetization (Ms) values reduced as the Ga content increased, although all samples had Hc values within the range for electromagnetic materials. The Ga-substitution had a synergistic effect on the electrochemical characteristics of BiGaxFe1-xO3, resulting in greater conductivity than that of undoped BiFeO3. These enhanced properties contributed to their higher photocatalytic activity in the degradation of crystal violet under visible light irradiation. The doped BiGaxFe1-xO3 exhibited 79% dye degradation after 90 min of illumination compared to 54% for pure BiFeO3. Recycling experiments confirmed the stability and reusability of the synthesized nanoparticles. The antibacterial activity of the samples was certified against various microbes, and the doped BiGaxFe1-xO3 showed promising activity. Thus, doped materials are good candidates for memories, dielectric resonators, and photovoltaics because of their high dielectric constant and AC conductivity, while their higher photocatalytic activity under visible light makes them promising photocatalysts for removing noxious and harmful effluents from wastewaters.
RESUMO
Novel spiropyrazoline-indolinones (4a-t) have been synthesized successfully in neutral deep eutectic solvents by reacting 5-Cl/Br-isatin (1a-b) with aromatic ketones (2a-b) and a variety of substituted hydrazines (3a-e) in good to excellent yields. This eco-friendly straightforward synthetic protocol discloses good functional group compatibility. The conventional synthetic approach was compared with the greener route of microwave-assisted synthesis of spiropyrazolines using ethanol. This approach utilized mild reaction conditions which furnished high yields in short reaction time employing one pot two-step multicomponent. All new compounds were structurally confirmed by detailed spectroscopic analysis and density functional theory calculations. This method provides efficient access to spiropyrazole derivatives using biodegradable and green solvent.
RESUMO
Abstract Very high gravity (VHG) technology was employed on industrial scale to produce ethanol from molasses (fermented) as well as by-products formation estimation. The effect of different Brix° (32, 36 and 40) air-flow rates (0.00, 0.20, 0.40, and 0.60 vvm) was studied on ethanol production. The maximum ethanol production was recorded to be 12.2% (v/v) at 40 Brix° with 0.2 vvm air-flow rate. At optimum level aeration and 40 Brix° VHG, the residual sugar level was recorded in the range of 12.5-18.5 g/L, whereas the viable cell count remained constant up to 50 h of fermentation and dry matter production increased with fermentation time. Both water and steam consumption reduced significantly under optimum conditions of Brix° and aeration rate with compromising the ethanol production. Results revealed VHG with continuous air flow is viable technique to reduce the ethanol production cost form molasses at commercial scale.