Two-phase simulation of entropy optimized mixed convection flow of two different shear-thinning nanomaterials in thermal and mass diffusion systems with Lorentz forces.

This research compares the momentum, thermal energy, mass diffusion and entropy generation of two shear thinning nanofluids in an angled micro-channel with mixed convection, nonlinear thermal radiation, temperature jump boundary condition and variable thermal conductivity effects. The [Formula: see text] approach was used to solve the Buongiorno nonlinear governing model. The effect of different parameters on the flow, energy, concentration, and entropy generating fields have been graphically illustrated and explained. The hyperbolic tangent nanoliquid has a better velocity than the Williamson nanofluid. The Williamson nanofluid has higher thermal energy and concentration than the hyperbolic tangent nanoliquid in the microchannel. The Grashof number, both thermal and solutal, increases the fluid flow rate throughout the flow system. The energy of the nanoliquid is reduced by the temperature jump condition, while the energy field of the nanoliquid is enhanced by the improving thermal conductivity value. The nanoliquids concentration rises as the Schmitt number rises. The irreversibility rate of the channel system is maximized by the variable thermal conductivity parameter.

Viscous dissipation effects on hybrid nanofluid flow over a non-linearly shrinking sheet with power-law velocity.

This research intends to investigate the effect of the nonlinearity of the surface velocity on the hybrid nanofluid flow behavior. Here, the total composition of Al2O3 (alumina) as well as Cu (copper) volume fractions, are implemented in a one-to-one ratio and then dispersed in water. The similarity equations are gained employing a similarity transformation, which is programmed in MATLAB software. The dual solutions are attainable for certain ranges with respect to the mass flux parameter S and the power-law index n. Also, the turning point occurs in the region of S<0 and n>1. Besides, the rise of n led to reduce the skin friction as well as the heat transfer coefficients with 39.44 % and 11.71 % reduction, respectively. Moreover, 14.39 % reduction of the heat transfer rate is observed in the presence of viscous dissipation (Eckert number). It is found that only the first solution is stable as time progresses. Generally, this study gives scientists and engineers a starting point for predicting how to control the parameters to achieve the best results for relevant practical applications.

Stability analysis for heat transfer flow in micropolar hybrid nanofluids.

Objective: hybrid nanofluids have superior thermal efficiency and physical durability in contrast to regular nanofluids. The stagnation point flow of MHD micropolar hybrid nanofluids over a deformable sheet with viscous dissipation is investigated. Methodology: the controlling partial differential equations are converted to nonlinear ordinary differential equations using the transmuted similarity, and are subsequently solved using the bvp4c solver in MATLAB. The hybrid nanofluids consist of aluminum and copper nanoparticles, dispersed in a base fluid of water. Results: multiple solutions are obtained in the given problem for the case of shrinking as well as for the stretching sheet due to the variation in several influential parameters. Non-unique solutions, generally, exist for the case of shrinking sheets. In addition, the first branch solution is physically stable and acceptable according to the stability analysis. The friction factor is higher for the branch of the first solution and lower in the second branch due to the higher magnetic parameters, while the opposite behavior is seen in the case of the local heat transfer rate. Originality: the novelty of this model is that it finds multiple solutions in the presence of Cu and Al2O3 nanoparticles and also performs the stability analysis. In general, non-unique solutions exist for the phenomenon of shrinking sheets.

Heat transfer analysis of buoyancy opposing radiated flow of alumina nanoparticles scattered in water-based fluid past a vertical cylinder.

Cooling and heating are two critical processes in the transportation and manufacturing industries. Fluid solutions containing metal nanoparticles have higher thermal conductivity than conventional fluids, allowing for more effective cooling. Thus, the current paper is a comparative exploration of the time-independent buoyancy opposing and heat transfer flow of alumina nanoparticles scattered in water as a regular fluid induced via a vertical cylinder with mutual effect of stagnation-point and radiation. Based on some reasonable assumptions, the model of nonlinear equations is developed and then tackled numerically employing the built-in bvp4c MATLAB solver. The impacts of assorted control parameters on gradients are investigated. The outcomes divulge that the aspect of friction factor and heat transport upsurge by incorporating alumina nanoparticles. The involvement of the radiation parameter shows an increasing tendency in the heat transfer rate, resulting in an enhancement in thermal flow efficacy. In addition, the temperature distribution uplifts due to radiation and curvature parameters. It is discerned that the branch of dual outcomes exists in the opposing flow case. Moreover, for higher values of the nanoparticle volume fraction, the reduced shear stress and the reduced heat transfer rate increased respectively by almost 1.30% and 0.0031% for the solution of the first branch, while nearly 1.24%, and 3.13% for the lower branch solution.

Mixed Convection Hybrid Nanofluid Flow Induced by an Inclined Cylinder with Lorentz Forces.

Hybrid nanofluids may exhibit higher thermal conductivity, chemical stability, mechanical resistance and physical strength compared to regular nanofluids. Our aim in this study is to investigate the flow of a water-based alumina-copper hybrid nanofluid in an inclined cylinder with the impact of buoyancy force and a magnetic field. The governing partial differential equations (PDEs) are transformed into a set of similarity ordinary differential equations (ODEs) using a dimensionless set of variables, and then solved numerically using the bvp4c package from MATLAB software. Two solutions exist for both buoyancy opposing (λ < 0) and assisting (λ > 0) flows, whereas a unique solution is found when the buoyancy force is absent (λ = 0). In addition, the impacts of the dimensionless parameters, such as curvature parameter, volume fraction of nanoparticles, inclination angle, mixed convention parameter, and magnetic parameter are analyzed. The results of this study compare well with previously published results. Compared to pure base fluid and regular nanofluid, hybrid nanofluid reduces drag and transfers heat more efficiently.

Non-Unique Solutions of Magnetohydrodynamic Stagnation Flow of a Nanofluid towards a Shrinking Sheet Using the Solar Radiation Effect.

This study aims to investigate the magnetohydrodynamic flow induced by a moving surface in a nanofluid and the occurrence of suction and solar radiation effects using the Buongiorno model. The numerical findings are obtained using MATLAB software. The effects of various governing parameters on the rates of heat and mass transfer along with the nanoparticles concentration and temperature profiles are elucidated graphically. Non-unique solutions are discovered for a specific variation of the shrinking strength. The temporal stability analysis shows that only one of them is stable as time passes. Furthermore, raising the Brownian motion parameter reduces both the local Sherwood number and the local Nusselt number for both solutions. It is also observed that increasing the thermophoresis parameter reduces the rate of heat transfer, whereas the opposite trend is observed for the rate of mass transfer.

Time-Dependent Flow of Water-Based CoFe2O4-Mn-ZnFe2O4 Nanoparticles over a Shrinking Sheet with Mass Transfer Effect in Porous Media.

The use of hybrid nanoparticles to increase heat transfer is a favorable area of research, and therefore, numerous scientists, researchers, and scholars have expressed their appreciation for and interest in this field. Determining the dynamic role of nanofluids in the cooling of microscopic electronic gadgets, such as microchips and related devices, is also one of the fundamental tasks. With such interesting and useful applications of hybrid nanofluids in mind, the main objective is to deal with the analysis of the unsteady flow towards a shrinking sheet in a water-based hybrid ferrite nanoparticle in porous media, with heat sink/source effects. Moreover, the impact of these parameters on heat and mass transfers is also reported. Numerical results are obtained using MATLAB software. Non-unique solutions are determined for a certain shrinking strength, in addition to the unsteadiness parameter. The mass transfer and friction factor increase for the first solution due to the hybrid nanoparticles, but the heat transfer rate shows the opposite effect.

Analytical Approach for a Heat Transfer Process through Nanofluid over an Irregular Porous Radially Moving Sheet by Employing KKL Correlation with Magnetic and Radiation Effects: Applications to Thermal System.

The aluminum nanoparticle is adequate for power grid wiring, such as the distribution of local power and the transmission of aerial power lines, because of its higher conductivity. This nanoparticle is also one of the most commonly used materials in applications in the electrical field. Thus, in this study, a radiative axisymmetric flow of Casson fluid, induced by water-based Al2O3 nanofluid by using the Koo-Kleinstreuer-Li (KKL) correlation, is investigated. The impact of the magnetic field is also taken into account. KKL correlation is utilized to compute the thermal conductivity and effective viscosity. Analytical double solutions are presented for the considered axisymmetric flow model after implementing the similarity technique to transmute the leading equations into ordinary differential equations. The obtained analytic forms were used to examine and discuss the velocity profile, the temperature distribution, reduced heat transfer, and coefficient of reduced skin friction. The analytic solutions indicate that the velocity profile decreases in the branch of the first solution and uplifts in the branch of the second solution due to the presence of an aluminum particle, whereas the dimensionless temperature enhances in both solutions. In addition, the Casson parameter increases the friction factor, as well as the heat transport rate.

Forced convection flow of water conveying AA7072 and AA7075 alloys-nanomaterials on variable thickness object experiencing Dufour and Soret effects.

Hybrid nanofluids containing titanium alloy particles have a large class of applications in industrial plastics and soaps, microsensors, aerospace material designs, optical filters, nanowires, surgical implants, and a variety of biological applications. This paper presents a mathematical analysis of Soret and Dufour impacts on the radiative flow through a thin moving needle of binary hybrid alloys nanoparticles. The transformed ordinary differential equations are solved numerically using the built-in function, bvp4c, in MATLAB software. The influences of all relevant parameters are shown in figures and tables. Two outcomes are developed for a precise range of the velocity ratio parameter. In particular, dual solutions are obtained when the needle and the fluid move in the opposite directions, while the solution is unique when they move in the same direction. The outcomes disclose that addition of nanoparticles into the base fluid upsurges the shear stress and the Nusselt number while decreasing the Sherwood number. Meanwhile, an upsurge in the needle size results in an uplift of the temperature and the concentration for the upper branch solution, whereas the velocity declines.

Agrawal Axisymmetric Rotational Stagnation-Point Flow of a Water-Based Molybdenum Disulfide-Graphene Oxide Hybrid Nanofluid and Heat Transfer Impinging on a Radially Permeable Moving Rotating Disk.

The hybrid nanofluid has sparked new significance in the industrial and engineering sectors because of their applications like water heating in solar and analysis of heat exchanger surfaces. As a result, the current study emphasizes the analysis of heat transfer and Agrawal axisymmetric flow towards a rotational stagnation point incorporated via hybrid nanofluids imposing on a radially permeable shrinking/stretching rotating disk. The leading partial differential equations are refined into ordinary differential equations by using appropriate similarity variables. The bvp4c solver in MATLAB is then employed to solve the simplified system numerically. The current numerical procedure is adequate of generating double solutions when excellent initial guesses are implemented. The results show that the features of fluid flow along with heat transfer rate induced by hybrid nanofluid are significantly influenced. The Nusselt number and the tendency of the wall drag force can be improved as the concentration of nanoparticles and the suction factor are increased. Moreover, the results of the model have been discussed in detail for both solution branches due to the cases of rotating disk parameter as well as non-rotating disk parameter. Therefore, an extraordinary behavior is observed for the branch of lower solutions in the case of rotating disk parameter. In addition, the shear stress in the radial direction upsurges for the first solution but declines for the second solution with higher values of suction. Moreover, the rotating parameter slows down the separation of the boundary layer.

Impact of Smoluchowski Temperature and Maxwell Velocity Slip Conditions on Axisymmetric Rotated Flow of Hybrid Nanofluid past a Porous Moving Rotating Disk.

Colloidal suspensions of regular fluids and nanoparticles are known as nanofluids. They have a variety of applications in the medical field, including cell separation, drug targeting, destruction of tumor tissue, and so on. On the other hand, the dispersion of multiple nanoparticles into a regular fluid is referred to as a hybrid nanofluid. It has a variety of innovative applications such as microfluidics, heat dissipation, dynamic sealing, damping, and so on. Because of these numerous applications of nanofluids in minds, therefore, the objective of the current exploration divulged the axisymmetric radiative flow and heat transfer induced by hybrid nanofluid impinging on a porous stretchable/shrinkable rotating disc. In addition, the impact of Smoluchowski temperature and Maxwell velocity slip boundary conditions are also invoked. The hybrid nanofluid was formed by mixing the copper (Cu) and alumina (Al2O3) nanoparticles scattered in the regular (viscous) base fluid (H2O). Similarity variables are used to procure the similarity equations, and the numerical outcomes are achieved using bvp4c in MATLAB software. According to the findings, double solutions are feasible for stretching (λ>0) and shrinking cases (λ<0). The heat transfer rate is accelerated as the hybrid nanoparticles increases. The suction parameter enhances the friction factors as well as heat transfer rate. Moreover, the friction factor in the radial direction and heat transfer enrich for the first solution and moderate for the second outcome due to the augmentation δ1, while the trend of the friction factor in the radial direction is changed only in the case of stretching for both branches.

Hybrid nanofluid flow towards a stagnation point on a stretching/shrinking cylinder.

This paper examines the stagnation point flow towards a stretching/shrinking cylinder in a hybrid nanofluid. Here, copper (Cu) and alumina (Al2O3) are considered as the hybrid nanoparticles while water as the base fluid. The governing equations are reduced to the similarity equations using a similarity transformation. The resulting equations are solved numerically using the boundary value problem solver, bvp4c, available in the Matlab software. It is found that the heat transfer rate is greater for the hybrid nanofluid compared to the regular nanofluid as well as the regular fluid. Besides, the non-uniqueness of the solutions is observed for certain physical parameters. It is also noticed that the bifurcation of the solutions occurs in the shrinking regions. In addition, the heat transfer rate and the skin friction coefficients increase in the presence of nanoparticles and for larger Reynolds number. It is found that between the two solutions, only one of them is stable as time evolves.

On the Stability of MHD Boundary Layer Flow over a Stretching/Shrinking Wedge.

The steady two dimensional magnetohydrodynamic (MHD) boundary layer flow and heat transfer over a stretching/shrinking permeable wedge is numerically investigated. The partial differential equations governing the flow and heat transfer are transformed into a system of ordinary differential equations using a similarity transformation. These equations are then solved numerically using the boundary value problem solver, bvp4c in Matlab software. It is found that dual solutions exist for a certain range of the shrinking strength. A stability analysis is performed to identify which solution is stable and physically reliable.

MHD Stagnation-Point Flow and Heat Transfer with Effects of Viscous Dissipation, Joule Heating and Partial Velocity Slip.

The steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet with effects of viscous dissipation, Joule heating and partial velocity slip in the presence of a magnetic field is investigated. The partial differential equations are reduced to nonlinear ordinary differential equations by using a similarity transformation, before being solved numerically by shooting technique. Results indicate that the skin friction coefficient and the local Nusselt number increase as magnetic parameter increases. It is found that for the stretching sheet the solution is unique while for the shrinking sheet there exist nonunique solutions (dual solutions) in certain range of parameters. The stability analysis shows that the upper branch solution is stable while the lower branch solution is unstable.

The magnetohydrodynamic stagnation point flow of a nanofluid over a stretching/shrinking sheet with suction.

The magnetohydrodynamic (MHD) stagnation point flow of a nanofluid over a permeable stretching/shrinking sheet is studied. Numerical results are obtained using boundary value problem solver bvp4c in MATLAB for several values of parameters. The numerical results show that dual solutions exist for the shrinking case, while for the stretching case, the solution is unique. A stability analysis is performed to determine the stability of the dual solutions. For the stable solution, the skin friction is higher in the presence of magnetic field and increases when the suction effect is increased. It is also found that increasing the Brownian motion parameter and the thermophoresis parameter reduces the heat transfer rate at the surface.

Flow past a permeable stretching/shrinking sheet in a nanofluid using two-phase model.

The steady two-dimensional flow and heat transfer over a stretching/shrinking sheet in a nanofluid is investigated using Buongiorno's nanofluid model. Different from the previously published papers, in the present study we consider the case when the nanofluid particle fraction on the boundary is passively rather than actively controlled, which make the model more physically realistic. The governing partial differential equations are transformed into nonlinear ordinary differential equations by a similarity transformation, before being solved numerically by a shooting method. The effects of some governing parameters on the fluid flow and heat transfer characteristics are graphically presented and discussed. Dual solutions are found to exist in a certain range of the suction and stretching/shrinking parameters. Results also indicate that both the skin friction coefficient and the local Nusselt number increase with increasing values of the suction parameter.

Boundary layer flow and heat transfer over a nonlinearly permeable stretching/shrinking sheet in a nanofluid.

The steady boundary layer flow and heat transfer of a nanofluid past a nonlinearly permeable stretching/shrinking sheet is numerically studied. The governing partial differential equations are reduced into a system of ordinary differential equations using a similarity transformation, which are then solved numerically using a shooting method. The local Nusselt number and the local Sherwood number and some samples of velocity, temperature and nanoparticle concentration profiles are graphically presented and discussed. Effects of the suction parameter, thermophoresis parameter, Brownian motion parameter and the stretching/shrinking parameter on the flow, concentration and heat transfer characteristics are thoroughly investigated. Dual solutions are found to exist in a certain range of the stretching/shrinking parameter for both shrinking and stretching cases. Results indicate that suction widens the range of the stretching/shrinking parameter for which the solution exists.

Stagnation point flow and mass transfer with chemical reaction past a stretching/shrinking cylinder.

This paper is about the stagnation point flow and mass transfer with chemical reaction past a stretching/shrinking cylinder. The governing partial differential equations in cylindrical form are transformed into ordinary differential equations by a similarity transformation. The transformed equations are solved numerically using a shooting method. Results for the skin friction coefficient, Schmidt number, velocity profiles as well as concentration profiles are presented for different values of the governing parameters. Effects of the curvature parameter, stretching/shrinking parameter and Schmidt number on the flow and mass transfer characteristics are examined. The study indicates that dual solutions exist for the shrinking cylinder but for the stretching cylinder, the solution is unique. It is observed that the surface shear stress and the mass transfer rate at the surface increase as the curvature parameter increases.

Mixed convection boundary layer flow over a moving vertical flat plate in an external fluid flow with viscous dissipation effect.

The steady boundary layer flow of a viscous and incompressible fluid over a moving vertical flat plate in an external moving fluid with viscous dissipation is theoretically investigated. Using appropriate similarity variables, the governing system of partial differential equations is transformed into a system of ordinary (similarity) differential equations, which is then solved numerically using a Maple software. Results for the skin friction or shear stress coefficient, local Nusselt number, velocity and temperature profiles are presented for different values of the governing parameters. It is found that the set of the similarity equations has unique solutions, dual solutions or no solutions, depending on the values of the mixed convection parameter, the velocity ratio parameter and the Eckert number. The Eckert number significantly affects the surface shear stress as well as the heat transfer rate at the surface.