Effect of Mastication Muscle Activity on Prefrontal Cortex NIRS Measurement: A Pilot Study.

Changes in NIRS signals are related to changes in local cerebral blood flow or oxy-Hb concentration. On the other hand, recent studies have revealed the effect of chewing gum on cognitive performance, stress control etc. which accompanied brain activity in the prefrontal cortex (PFC). However, these relationships are still controversial. To evaluate the chewing effect on PFC, NIRS seems to be a suitable method of imaging such results. When measuring NIRS on PFC, blood volume in superficial tissues (scalp, skin, muscle) might have some affect. The aim of the present study was to clarify the effect of the anterior temporal muscle on NIRS signals during gum chewing. Eight healthy volunteers participated. Two-channel NIRS (HOT-1000, NeU, Japan), which can distinguish total-Hb concentrations in deep tissue and superficial tissue layers, was used. In addition to a conventional optode separation distance of 3.0 cm, Hot 1000 has a short distance of 1.0 cm (NEAR channel) to measure NIRS signals that originate exclusively from surface tissues. NIRS probes were placed at Fp1 and Fp2 in the normal probe setting. The headset was displaced to the left in order to allow the left probe to be placed over the left anterior temporal muscle. In the normal setting, the superficial signal curve shows no notable change; however, the neural (calculated and defined in HOT-1000) and deep curves show an increase during the gum chewing task. At the deviated setting, all three signals show marked changes during the task. Total-Hb concentration in the deviated probe setting is significantly large (p < 0.05) than that of in the normal probe setting. When using gum chewing as a task, it would be better to consider a probe position carefully so that the influence of muscle activity on NIRS signal can be distinguished.

Masseter Muscle Activity in Track and Field Athletes: A Pilot Study.

Teeth clenching has been shown to improve remote muscle activity (by augmentation of the Hoffmann reflex), and joint fixation (by decreased reciprocal inhibition) in the entire body. Clenching could help maintain balance, improve systemic function, and enhance safety. Teeth clenching from a sports dentistry viewpoint was thought to be important and challenging. Therefore, it is quite important to investigate mastication muscles' activity and function during sports events for clarifying a physiological role of the mastication muscle itself and involvement of mastication muscle function in whole body movement. Running is a basic motion of a lot of sports; however, a mastication muscles activity during this motion was not clarified. Throwing and jumping operation were in a same situation. The purpose of this study was to investigate the presence or absence of masseter muscle activity during track and field events. In total, 28 track and field athletes took part in the study. The Multichannel Telemetry system was used to monitor muscle activity, and the electromyograms obtained were synchronized with digital video imaging. The masseter muscle activity threshold was set 15% of maximum voluntary clenching. As results, with few exceptions, masseter muscle activity were observed during all analyzed phases of the 5 activities, and that phases in which most participants showed masseter muscle activity were characterized by initial acceleration, such as in the short sprint, from the commencement of throwing to release in both the javelin throw and shot put, and at the take-off and landing phases in both jumps.

Influence of Pleasant and Unpleasant Auditory Stimuli on Cerebral Blood Flow and Physiological Changes in Normal Subjects.

The prefrontal cortex (PFC) plays an important role in emotion and emotional regulation. The valence asymmetry hypothesis, proposes that the left/right asymmetry of the PFC activity is correlated with specific emotional responses to stressors. However, this hypothesis still seems to leave room for clarifying neurophysiological mechanisms. The purpose of the present study was to investigate the effects of stimuli with positive and negative valence sounds (hereafter PS, NS) selected from the International Affective Digitized Sounds-2 on physiological and physiological responses, including PFC activity in normal participants. We studied the effect of both stimuli using 12 normal subjects (mean age 26.8 years) on cerebral blood oxygenation in the bilateral PFC by a multi-channel NIRS, alpha wave appearance rate in theta, alpha, beta by EEG, autonomic nervous function by heart rate, and emotional conditions by the State-Trait Anxiety Inventory (STAI) and the visual analogue scale (VAS). PS was selected over 7.00 and NS were fewer than 3.00 in the Pleasure values. Sounds were recorded during 3 s and reproduced at random using software. Every task session was designed in a block manner: seven rests with Brown Noise (30 s) and six tasks (30 s) blocks. All participants performed each session in random order with eyes closed. A paired Student's t-test was used for comparisons (P<0.05). PFC activity showed increases bilaterally during both stimuli with a greater activation of the left side in PS and a tendency of more activation by NS in the right PFC. Significantly greater alpha wave intensity was obtained in PS. Heart rate tended to show smaller values in PS. The STAI level tended to show smaller values in PS, and a significantly greater VAS score was obtained in PS which indicated 'pleasant'. Despite the limitations of this study such as the low numbers of the subjects, the present study indicated that PS provided pleasant psychological and physiological responses and NS unpleasant responses. The PFC was activated bilaterally, implying a valence effect with the possibility of a dominant side.

Relationships Between Gum-Chewing and Stress.

Studies have shown that chewing is thought to affect stress modification in humans. Also, studies in animals have demonstrated that active chewing of a wooden stick during immobilization stress ameliorates the stress-impaired synaptic plasticity and prevents stress-induced noradrenaline release in the amygdala. On the other hand, studies have suggested that the right prefrontal cortex (PFC) dominates the regulation of the stress response system, including the hypothalamic-pituitary-adrenal (HPA) axis. The International Affective Digitized Sounds-2 (IADS) is widely used in the study of emotions and neuropsychological research. Therefore, in this study, the effects of gum-chewing on physiological and psychological (including PFC activity measured by NIRS) responses to a negative stimulus selected from the IADS were measured and analyzed. The study design was approved by the Ethics Committee of Tokyo Dental College (No. 436). We studied 11 normal adults using: cerebral blood oxygenation in the right medial PFC by multi-channel NIRS; alpha wave intensity by EEG; autonomic nervous function by heart rate; and emotional conditions by the State-Trait Anxiety Inventory (STAI) test and the 100-mm visual analogue scale (VAS). Auditory stimuli selected were fewer than 3.00 in Pleasure value. Sounds were recorded in 3 s and reproduced at random using software. Every task session was designed in a block manner; seven rests: Brown Noise (30 s) and six task blocks: auditory stimuli or auditory stimuli with gum-chewing (30 s). During the test, the participants' eyes were closed. Paired Student's t-test was used for the comparison (P<0.05). Gum-chewing showed a significantly greater activation in the PFC, alpha wave appearance rate and HR. Gum-chewing also showed a significantly higher VAS score and a smaller STAI level indicating 'pleasant'. Gum-chewing affected physiological and psychological responses including PFC activity. This PFC activation change might influence the HPA axis and ANS activities. In summary, within the limitations of this study, the findings suggest that gum-chewing reduced stress-related responses. Gum-chewing might have a possible effect on stress coping.

Effect of clenching with a mouthguard on head acceleration during heading of a soccer ball.

Concussions are acceleration-deceleration injuries that occur when biomechanical forces are transmitted to the cerebral tissues. By limiting acceleration of the head, enhanced cervical muscle activity derived from clenching with a mouthguard (MG) may reduce the incidence or severity of concussions following impact. The purpose of this study was to investigate the effect of voluntary clenching with a proper MG on acceleration of the head during "heading" of a soccer ball. Eleven male high school soccer players (mean age, 16.8 years) participated in the study. Each player was given a customized MG. An automated soccer machine was used to project the ball at the participants at a constant speed. The participants headed the ball under 3 different oral conditions: drill 1, heading freely performed without instruction and without the MG; drill 2, heading performed as the subject was instructed to clench the masseter muscles tightly while not wearing the MG; drill 3, heading performed as the subject was instructed to clench tightly while wearing the MG. Each participant repeated each drill 5 times. Linear acceleration of the head was measured with a 3-axis accelerometer. Activity of the masseter and sternocleidomastoid muscles was measured by wireless electromyography. Weak masseter and sternocleidomastoid muscle activity was observed during drill 1. After the soccer players had been instructed to clench their masseter muscles (drills 2 and 3), statistically significant decreases in head acceleration and increases in masseter and sternocleidomastoid muscle activity were observed (P < 0.05; paired t test). The effect was stronger when the players wore the MG. Dentists should encourage soccer players to habitually clench while wearing a proper mouthguard to strengthen cervical muscle resistance as a way to mitigate the damage caused by heading.

Thinning factors influence on custom-made mouthguards thermoforming.

The aim of this study was to clarify and quantify factors influencing thinning during a thermoforming using a special simulation model that has three different flat surfaces such as 0 degree, 45 degree and 90 degree against a pressurizing force. Air pressure type samples were made by EVA and acrylic resin blank. Vacuum type samples were also made by EVA. Thickness gauge was employed to measure the thickness. As results, pressure forming showed significantly larger thinning at 45 and 90 degree surfaces and smaller thinning at 0 degree surface, 36% in thinning rate by vacuum forming and 66% by the pressure forming at 90 degree surface, and 17% and 20% at 45 degree surface, and 11% and 2% at 0 degree surfaces. Thinning was increased with the increase in distance from the centre in 0 degree surface and increased with the decrease in height in the vertical surface significantly. The air pressure, the material thickness in EVA (Drufosoft) and difference in material colour did not affect thinning rate. An acrylic resin material showed approximately 10% smaller thinning than EVA (Drufosoft). To retain enough thickness of 3 mm on 90 degree surface corresponding to an incisal labial aspect for pressure laminate type, over 55% reduction is taken into consideration and at least two 3-mm-thickness materials should be laminated. 0 degree surface showed at most 2 % reduction in pressure lamination; post thermoforming occlusal thickness became almost 6 mm with a usual 3 mm plus 3 mm lamination. Therefore, careful occlusal adjustment in an actual mouthguard fabrication to achieve an appropriate 2 mm thickness on this surface should be requested.

Shock absorption ability of mouthguard against forceful, traumatic mandibular closure.

BACKGROUND: The positive effects of wearing a mouthguard on shock absorption have been indicated in various papers. The ability of a mouthguard to protect against indirect injury, however, is not clear, and the thickness that a mouthguard would require to provide such protection remains to be determined. The primary aim of this study was to clarify the shock absorption potential of a mouthguard against forced, traumatic occlusion. The secondary objective was to compare the shock absorption ability of different thicknesses of mouthguard against this type of trauma. MATERIALS AND METHODS: An artificial skull (ZA20; 3B Scientific International, Co. Ltd, Niigata, Japan) with two-axis strain gages applied to the right buccal aspect of the mandible and the mandibular and maxillary teeth was used to measure shock absorption ability. Three different thicknesses of EVA mouthguard (1, 2, and 3 mm at the first molar) were tested. RESULTS AND CONCLUSIONS: Within the limitations of this laboratory study, the following results were obtained: the results showed that increasing the thickness of the mouthguard improved its shock absorption ability.

Paired maxillary and smaller mandibular mouthguard for rugby player with malalignment.

A rugby player who had frequently experienced soft tissue injuries while playing rugby and wearing a conventional custom-made mouthguard came to the hospital clinic. The patient had suffered traumatic soft tissue injuries such as lip lacerations and bite trauma. Severe crowding due to ectopic maxillary and mandibular canines was observed. In response to the patient's request for better protection, a set of maxillary and mandibular mouthguards was designed: one covering the entire maxillary dentition and the other the mandibular front teeth only. The mouthguards were to be worn simultaneously. In this paper, we describe how these mouthguards were fabricated and discuss the results. The patient has experienced no injury to the stomatognathic system, including the lips, for five seasons since he began wearing this set of mouthguards. This new pairing of mouthguards appears to offer sufficient protection against injury, despite severe malalignment. We believe that this new type of paired maxillary and mandibular mouthguards has the potential to reduce sports-related dental injuries.

Does clenching reduce indirect head acceleration during rugby contact?

BACKGROUND: Concussions are common among athletes, with the potential to cause memory-related, physical, cognitive, emotional, and behavioral damage. A concussion is an acceleration/deceleration injury resulting from direct and indirect biomechanical forces transmitted to the cerebral tissues. From a sports dentistry viewpoint, increased mastication muscle activity or clenching due to the presence of a mouthguard may enhance cervical muscle activity, thereby reducing damage following impact. This relationship has not been previously investigated in the context of rugby. The purpose of this study was to investigate the effect of voluntary clenching on indirect head acceleration during attack- and defense-related drills. MATERIALS AND METHODS: A total of 12 high school rugby players participated in the study. Linear acceleration of the head was measured using an accelerometer that took measurements in three axes. Masseter and sternocleidomastoid muscle activities were measured using wireless electromyography. These data were synchronized using digital video imaging software for analysis. The study protocol was approved by the Tokyo Dental College Ethics Committee. RESULTS AND CONCLUSIONS: Within the limitations of this study, the following results were obtained: the activities performed during rugby practice involved relatively small indirect head acceleration and masseter and sternocleidomastoid muscle activities. After the young male rugby players were instructed to clench their masseter muscles, a marked decrease in head acceleration was observed.

Influence of different post-core systems on impact stress: a pilot study.

UNLABELLED: This pilot study compared impact strain at the core and root surfaces between two different post-core systems. MATERIALS AND METHODS: The form of a bovine mandibular front tooth was modified to resemble that of a human maxillary incisor as a test specimen. A cast post and core (Metal PC) and composite resin and glass fiber-reinforced epoxy resin post (Fiber-Resin PC) system were tested. Four gauges were affixed to the buccal and lingual surfaces of the core and root. The specimens were then embedded in a metal mold using dental stone. A pendulum-type device with a pyramid-shaped metal impact object with a titanium alloy head was used to provide 2 different shock forces. Maximum distortion was measured and analyzed. RESULTS: Distortion at the core at each measurement point and total amount of distortion with Fiber-Resin PC was significantly greater (p<0.05) than that with Metal PC against both impact forces. On the other hand, distortion at the root at the buccal measurement point with Fiber-Resin PC was significantly less than that with Metal PC against both impact forces. Total distortion was significantly less with Fiber-Resin PC than that with Metal PC against the greater impact shock. Acceleration with Fiber-Resin PC was significantly less than that with Metal PC against both impact forces. CONCLUSION: Fiber-Resin PC has the potential to protect remaining root against traumatic force. This suggests that a Fiber-Resin PC is more suitable for non-vital teeth against not only occlusal but also traumatic impact force.

Effects of experimentally deviated mandibular position on stress response.

The purpose of this study was to investigate the effects of stress on -prefrontal cortex (PFC), emotion (using visual analogue scale, VAS, and State-Trait Anxiety Inventory, STAI), and the autonomic nervous system (ANS). Two types of stress were applied: (1) malocclusion-induced physical stress and (2) mental stress induced by an arithmetic task. Malocclusion was induced using an experimentally deviated mandibular device (EDMD) to obtain an experimentally deviated mandibular position (EDMP). A total of 11 healthy volunteers participated in the study. On day 1 they performed a pretrial arithmetic task followed by a 10-min rest, after which they performed a posttrial EDMD + arithmetic task or rest device + arithmetic task. These two tasks were selected at random and assigned at the rate of one per day. Activity in the PFC tended to show an increase in the pretrial arithmetic tasks and rest device + arithmetic task, but a decrease in the EDMD + arithmetic task compared with the rest device + arithmetic task. Heart rate significantly increased during the rest device + arithmetic task, whereas no significant difference was observed during the EDMD + arithmetic task. The EDMD + arithmetic task significantly increased STAI scores (p = 0.0047), and the significant decrease in VAS indicated "unpleasant" (p = 0.035). These findings suggest that EDMP-induced reduction in the level of PFC activity was a response to discomfort, indicating that EDMP affects systemic function such as that of the ANS as an unpleasant stressor.

Effects of occlusal disharmony on working memory performance and prefrontal cortex activity induced by working memory tasks measured by NIRS.

The effects of artificial occlusal disharmony (AOD) on working memory function and prefrontal cortex (PFC) activity in the elderly were examined. We evaluated working memory function using the modified Sternberg test (ST). We measured activity in the bilateral PFC during ST using near-infrared spectroscopy (NIRS) before and after AOD: the mandibular position was displaced by a splint for 10 min. AOD caused a gradual increase of oxyhemoglobin (oxy-Hb) in the bilateral PFC. The response time of ST (six digits) after AOD was longer than that before AOD. The oxy-Hb increase during ST after AOD was smaller than that before AOD. These results indicate that short-term physical stress caused by AOD decreased working memory function in elderly subjects, associated with a decrease of the evoked PFC activity during working memory function.

Easy fabrication of a new type of mouthguard incorporating a hard insert and space and offering improved shock absorption ability.

The positive effects of wearing a mouthguard have been indicated in various epidemiological surveys and experiments, and their usage appears to be increasing in many sports. However, many preventable sports-related dental injuries still occur even with the use of a conventional mouthguard. We have developed a mouthguard (the Hard & Space mouthguard) with sufficient injury prevention ability (more than 95% shock absorption ability against impact with a steel ball carrying 15.2 kg m(2) S(-2) potential energy) and ease of clinical application. This mouthguard consists of an outer and an inner EVA layer and a middle layer of acrylic resin (hard insert), with a space to prevent contact between the inner surface of the mouthguard and the buccal surfaces of the maxillary front teeth or teeth already weakened through prior damage or treatment. The purpose of this article is to describe the method by which the Hard & Space mouthguard may easily be fabricated. We believe that this new type of mouthguard has the potential to reduce sports-related dental injuries.

Effect of experimental horizontal mandibular deviation on dynamic balance.

PURPOSE: There are two aspects of human balance: static balance and dynamic balance. However, to the author's knowledge, no studies have investigated how changes in the stomatognathic system influence dynamic balance. This aim of this study was to determine the effect of horizontal mandibular deviation on stability of upright posture on an unstable platform in order to clarify the relationship between the stomatognathic system and the dynamic balance. METHODS: Fifteen healthy adult participants were selected. To determine the effect of changes in the stomatognathic system on dynamic balance, three experimental conditions were established: a resting mandibular position, a position in which experimental horizontal mandibular deviation was maintained by a splint, and a mandibular rest position maintained by a splint. Each participant was instructed to stand in a natural upright posture on an unstable board, and resulting variation in angle of the board was then measured. Measurements were taken 15 times under each condition. RESULTS: Variation in angle of inclination of the board as dynamic balance was the largest in the splint-maintained deviated mandibular position. CONCLUSION: Horizontal deviation in mandibular position interfered with stability of upright posture on an unstable platform, suggesting that changes in the stomatognathic system affect dynamic balance.

Influence of pre-laminated material on shock absorption ability in specially designed mouthguard with hard insert and space.

PURPOSE: We have developed a new type of laminated mouthguard, the Hard & Space mouthguard, which incorporates a hard material insert and a space to prevent contact between the mouthguard and the buccal surfaces of the teeth. The purpose of this study was to investigate the effect of this new design on shock absorption. METHODS: Three types of mouthguard (a conventional laminated EVA mouthguard and two 3-layer type "Hard & Space" mouthguards made of 1.8-mm or 3.0-mm thick pre-laminated material (Konbiplast) and EVA with a 1.0-mm space) were impacted. Shock absorption was measured by means of a pendulum type steel ball impact testing machine at impact distances of 10, 20, and 30 cm and a dental study model with strain gauges attached to the lingual surfaces and an accelerometer fixed to the maxilla. RESULTS: Distortion of the impacted tooth and acceleration of the model were significantly reduced by all types of mouthguard at all 3 impact distances. The effect of the mouthguard was remarkable in terms of tooth distortion: both thicknesses of Hard & Space mouthguard showed more than 90% shock absorption, compared with only approximately 55-78% with an EVA mouthguard. Furthermore, shock absorption with the thicker 3.0-mm Hard & Space mouthguard reached more than 95% at the highest impact power. CONCLUSION: Within the limitations of this laboratory study, Hard & Space mouthguards showed significantly greater buffer capacity than a conventional EVA mouthguard in terms of tooth distortion at the 3 impact powers tested.

Activity in the premotor area related to bite force control--a functional near-infrared spectroscopy study.

The purpose of this study was to elucidate the influence of bite force control on oxygenated hemoglobin (OxyHb) levels in regional cerebral blood flow as an indicator of brain activity in the premotor area. Healthy right-handed volunteers with no subjective or objective symptoms of problems of the stomatognathic system or cervicofacial region were included. Functional near-infrared spectroscopy (fNIRS) was used to determine OxyHb levels in the premotor area during bite force control. A bite block equipped with an occlusal force sensor was prepared to measure clenching at the position where the right upper and lower canine cusps come into contact. Intensity of clenching was shown on a display and feedback was provided to the subjects. Intensity was set at 20, 50 and 80% of maximum voluntary teeth clenching force. To minimize the effect of the temporal muscle on the working side of the jaw, the fNIRS probes were positioned contralaterally, in the left region. The findings of this study are: activation of the premotor area with bite force control was noted in all subjects, and in the group analysis OxyHb in the premotor cortex was significantly increased as the clenching strengthened at 20, 50 and 80% of maximum voluntary clenching force. These results suggest there is a possibility that the premotor area is involved in bite force control.

Functional near-infrared spectroscopy study on primary motor and somatosensory cortex response to biting and finger clenching.

The purpose of this study was to compare the influence of biting and finger clenching intensity on the concentration of oxygenated hemoglobin (OxyHb) in regional cerebral blood flow (rCBF) as an indicator of brain activity in the primary motor (MI) and somatosensory (SI) cortices. Functional near-infrared spectroscopy (fNIRS) was used in 8 healthy subjects. Subjects were required to do biting (bite) and finger clenching (fclench) at 20, 50 and 80% of maximum force. To minimize the effect of temporal muscle activity on the working side of the jaw, the fNIRS probes were positioned contralaterally, in the left temporal region. Activation of MI and SI cortices with bite and fclench was noted in all subjects, irrespective of the intensity of bite and fclench. A significant increase was observed in OxyHb in MI and SI between 20% and both 50 and 80% intensity. In MI cortex, OxyHb showed a significant increase between 80% and both 20 and 50% fclench intensity. The results suggest that intensity of bite and fclench influences activation levels in MI and SI. Further, an activation was more obvious with bite than fclench.

Functional near-infrared spectroscopy study on primary motor and sensory cortex response to clenching.

The purpose of this study was to elucidate the influence of clenching and clenching intensity on oxygenated hemoglobin (OxyHb) levels in regional cerebral blood flow as an indicator of brain activity in the primary motor and sensory cortices. Functional near-infrared spectroscopy (fNIRS) was used to minimize the effect of clenching-associated muscle activity in eight healthy subjects. Subjects were required to clench at 20%, 50% and 80% of maximum clenching force. To minimize the effect of temporal muscle activity on the working side of the jaw, the fNIRS probes were positioned contralaterally, in the left temporal region. Activation of the primary motor and sensory cortices with clenching was noted in all subjects, irrespective of intensity of clenching. A significant increase was observed in OxyHb in the primary motor cortex between at 80% and both 20% and 50% clenching intensity. In the primary sensory cortex, OxyHb showed a significant increase between all levels of clenching intensity. The results suggest that clenching elicits activation of both the primary motor and sensory cortices, and that intensity of clenching influences activation levels in the brain.

In search of necessary mouthguard thickness. Part 1: From the viewpoint of shock absorption ability.

PURPOSE: To date, the minimum thickness required for a mouthguard has been assumed to be around 2 mm to 4 mm. However, this figure is based mostly on experience and is yet to be standardized. The purpose of this study is to determine the minimum thickness required to obtain sufficient energy absorption. METHODS: The thicknesses of the tested ethylene vinyl acetate) samples were 1, 2, 3, 4, 5, and 6 mm. The pendulum- type testing equipment used in the present study was also used in a series of earlier studies. Three types of sensors (strain gauge, accelerator, and load cell) and two different impact objects (a steel ball and baseball) were used. RESULTS: The results showed that all the above-mentioned mouthguard thicknesses reduced shocks for all the three types of sensors and both types of impact objects; little difference was observed between sensors and clear results were obtained for the steel ball. An improvement in the energy absorption was observed with an initial increase in the thickness. However, a further increase in the thickness from 4 mm to 5 mm and 6 mm tended to yield a smaller improvement in energy absorption. CONCLUSION: Within the limitations of this study, from the viewpoint of energy absorption ability, the minimum thickness required for a mouthguard is 4 mm, which is generally too large from the viewpoint of player comfort. This finding indicates the necessity of improving the impact absorption ability of mouthguards by considering new designs and developing new materials.

Are all mouthguards the same and safe to use? Part 2. The influence of anterior occlusion against a direct impact on maxillary incisors.

The purpose of this study was to clarify the influence anterior occlusion, of mouthguards, has on protecting against a direct collision to the maxillary anterior teeth. In other words, the support mandibular dentition has when wearing a mouthguard. Two types of mouthguards were used for this study, one with an appropriate anterior occlusion or a mouthguard with positive anterior occlusion (MGAO+) and another which was a single-layer mouthguard lacking the same occlusion or a mouthguard with negative anterior occlusion (MGAO-) but with the same thickness on the buccal side. The instruments used for testing were a pendulum-type impact device with two interchangeable impact objects (a steel ball and a baseball), with a plastic jaw model having artificial teeth. Four testing conditions were observed: one with the jaw open without a mouthguard (Open NoMG), the second with the jaw clenching (loaded with 30 kg weight) without a mouthguard (Clench. NoMG), the third with the jaw clenching with MGAO- (Clench. MGAO-) and the last with the jaw clenching with MGAO+ (Clench. MGAO+). The results are as follows: both types of mouthguards showed the effects in reducing the distortion of the teeth. However, the effect was significantly obvious (steel ball = about 57% shock absorption ability, baseball = about 26%) in the mouthguard with anterior occlusion or support by lower dentition through mouthguard (Clench. MGAO+) than Clench. MGAO-. Thus, the influence of anterior occlusion of mouthguards or the support of mandibular dentition through wearing a mouthguard (MGAO+) is indispensable in reducing the impact force and tooth distortion. The results of this research should further contribute to the establishment of guidelines for safer mouthguards.