Evaluation of treatment and restoration preferences in deep carious teeth with various pulp exposure sizes: A questionnaire-based survey.

This study evaluated the management preferences in a deep carious vital tooth. A questionnaire was e-mailed to members of the Turkish Dental Association. The questionnaire included a photograph and radiographs of an extremely deep carious molar (#16) of a 30-year-old man suffering from cold and chewing sensitivity. The dentists were asked to choose treatments for pulp exposure of <1, 1-2, and ≥2 mm and a permanent restoration. Chi-squared test was used to analyse data (p < 0.05). 504 (4.84%) of 10 411 dentists responded. When the pulp exposure was <1 mm: direct pulp capping (84.9%); 1-2 mm: root canal treatment (49.6%); ≥2 mm: root canal treatment (85.7%) were the most preferred treatments. 69.6% of the respondents chose direct composite restorations. If the tooth would be an abutment, most respondents preferred root canal treatment, regardless of the perforation size. The extent of pulp exposure and the type of permanent restoration influenced the treatment decision-making process.

Different Dentin Conditioning Protocols on Bond Strength of a Bioceramic Root Canal Filling.

Objective: Bioceramic-based sealers, in combination with bioceramic-coated gutta-perchas, have become more commonly used in root canal obturation. The present study aimed to assess the influence of laser-assisted dentin conditioning compared with conventional conditioning protocols on the push-out bond strength (PBS) of a bioceramic-based root canal filling. Material and Methods: Sixty extracted mandibular premolars with one root canal were instrumented with EndoSequence rotary files up to size 40/0.04. Four types of dentin conditioning protocols were used: 1) 5.25% NaOCl (control), 2) 17% EDTA+5.25% NaOCl, 3) Diode laser-agitated 17% EDTA+5.25% NaOCl, 4) Er,Cr:YSGG laser irradiation+5.25% NaOCl. Teeth were obturated using the single-cone technique with EndoSequence BC sealer+BC points (EBCF). After having obtained 1-mm-thick horizontal slices from the apical, middle and coronal root thirds, push-out test was carried out, and failure modes were determined. The data were analyzed by two-way analysis of variance and Tukey's test with a significance level of p<0.05. Results: The apical segments showed the highest PBS in all groups (p<0.05). In the apical segments, EDTA+NaOCl and diode laser agitated EDTA increased the PBS compared to the control (p=0.0001) and Er, Cr: YSGG laser (p=0.011 and p=0.027, respectively) groups. Both laser-used groups revealed significantly higher PBS values in the middle and coronal segments than EDTA+NaOCl (p<0.05). The bond failure was predominantly cohesive without any significant difference among the groups (p>0.05). Conclusions: Laser-assisted dentin conditioning had distinct effects on the PBS of the EBCF at different root segments. Although Er, Cr: YSGG was ineffective in the apical segments, generally, laser-assisted dentin conditioning affected PBS more favorably than conventional irrigation groups, with a more pronounced effect in the diode laser-agitated EDTA group.

Push-out bond strength of fiber posts to irradiated and non-irradiated intraradicular dentin.

OBJECTIVES: The aim of this study is to evaluate the influence of ionizing radiotherapy on the resin-dentin interface in endodontically treated teeth restored with fiber posts using a dual-cure resin cement performed with the etch-and-rinse (ER) and self-etch (SE) approaches in terms of push-out bond strength (MPa), and to analyze the post/cement/dentin interface using scanning electron microscopy (SEM). MATERIALS AND METHODS: Seventy-six single-rooted human teeth were used and randomly assigned into two main groups (n = 38): one non-irradiated group (NoRad) and one group subjected to a cumulative radiation dose of 60 Gy (Rad). All root canals were instrumented and were further subdivided into two subgroups (n = 19) following the adhesive approach: ER (RadER; NoRadER) and SE (RadSE; NoRadSE) used for fiber post luting with the universal adhesive and dual cure resin cement. Each root was sectioned perpendicularly to its long axis and sections from the middle third of the roots were chosen for SEM analysis and push-out bond strength test. Two-way ANOVA with post hoc Tukey tests and a dummy variable linear regression analysis were used for data analysis. RESULTS: Regardless of the adhesive approach, push-out bond strength in irradiated teeth resulted in significantly lower values than non-irradiated teeth (p = 0.0001). There were no significant differences between the ER and SE approaches in non-irradiated teeth (p = 0.955), whereas the ER approach showed significantly higher bond strengths than the SE approach in irradiated teeth (p = 0.0001). CONCLUSIONS: Ionizing radiotherapy resulted in dentin structure disruption and negatively affected the push-out bond strength of fiber posts to intraradicular dentin. The reduction in bond strength was also more significant with the SE approach than with the ER approach. CLINICAL RELEVANCE: The alterations resulting from root dentin irradiation seem to influence adhesive systems bond strength to dentin, as these changes contribute to lower push-out bond strength in irradiated groups before fiber post luting. Thus, clinicians should prepare patients with a reasonable restorative treatment plan prior to radiotherapy and simultaneously initiate a preventive program during radiotherapy.

Irrigant flow characteristics in the root canal with internal root resorption: a computational fluid dynamics evaluation.

Irrigation dynamics of syringe irrigation with different needle designs (side-vented, double side-vented, notched) and ultrasonic irrigation in the root canal with internal root resorption were evaluated using a computational fluid dynamics model. A micro-CT scanned mandibular premolar was used for modeling internal root resorption. The needles and the ultrasonic tip were positioned at 2, 4, and 5 mm from the working length. The insertion depth and the irrigation model were found influential on the shear stress and the irrigant extension. The extension of the irrigant increased toward 2-5 mm from the working length. Ultrasonic irrigation revealed the highest shear stress values regardless of the insertion depth. The shear stress distribution on the resorption cavity walls gradually increased when the needles were positioned coronally. The residence time of the irrigant in the canal was affected by the needle position relative to the internal root resorption cavity and the needle type.

Evaluation of the knowledge of final-year dental students on the use of antibiotics in endodontics in Turkey.

The knowledge of the final-year dental students on antibiotic use in endodontics in Turkey was assessed. The study was conducted at 20 Dentistry Faculties. A questionnaire was sent to the universities including the concerning several scenarios about endodontic cases. 1113 final-year dental students participated in the study. Respondents' significant choice was not to administrate antibiotics in endodontic treatments of symptomatic irreversible pulpitis, pulp necrosis, acute apical periodontitis, chronic apical abscess with or without sinus tract, retreatment, inadequate local anaesthesia and patient requests (P > 0.05). In acute apical abscess (AAA) with diffuse cases, choice of antibiotic administration was statistically higher (P < 0.05), while in AAA-localised cases, the ratio of antibiotic administration versus non-administration was similar. Amoxicillin was found to be the first-choice antibiotic in patients without medical allergies, whereas in allergic patients the first choice was clindamycin. Final-year dental students have fundamental knowledge on the antibiotic administration in endodontics.

Effect of Shaft Length on the Torsional Resistance of Rotary Nickel-titanium Instruments.

INTRODUCTION: This study was conducted to evaluate the effect of file length on the torsional resistance of nickel-titanium rotary files. METHODS: Forty-five new files with a #25 tip size and variable taper for ProTaper Next (PTN; Dentsply Sirona, York PA), ProTaper Gold (PTG, Dentsply Sirona), and HyFlex CM (HCM; Coltene-Whaledent, Allstetten, Switzerland) were divided into 3 subgroups (n = 15) according to the file length (21, 25, and 31 mm). Torsional tests were performed using a custom-made device (AEndoS; DMJ System, Busan, Korea). The maximum torsional load and distortion angle were measured until file fracture occurred. The toughness was calculated using these data. All data were statistically analyzed using 2-way analysis of variance at a confidence level of 95%. One-way analysis of variance and Duncan post hoc comparison were also conducted to assess the difference among the independent variables, shaft length, and file system. RESULTS: A statistically significant interaction was observed between the file system and instrument length with respect to the maximum torsional load (P < .05). The 31-mm shaft length of HCM showed higher maximum torsional load than that of the 25- and 21-mm shaft length in the HCM groups (P < .05). Among the instrument systems, PTG showed the significantly highest maximum torsional load followed by PTN and HCM (P < .05). The 31-mm shaft length of PTG showed significantly higher toughness than that of the 21- and 25-mm shaft lengths (P < .05), whereas PTN and HCM did not show any difference in relation to the shaft length. CONCLUSIONS: Within the limitations of this study, the instrument with a longer shaft may have higher maximum torsional load or toughness than that with a shorter shaft.