Enhanced Efficiency and Stability of Sky Blue Perovskite Light-Emitting Diodes via Introducing Lead Acetate.

All-inorganic metal halide perovskite is promising for highly efficient and thermally stable perovskite light-emitting diodes (PeLEDs). However, there is still great room for improvement in the film quality, including low coverage and high trap density, which play a vital role in achieving high-efficiency PeLEDs. In this work, lead acetate (Pb(Ac)2) was introduced into the perovskite precursor solution as an additive. Experimental results show that perovskite films deposited from a one-step anti-solvent free solution process with increased surface coverage and reduced trap density were obtained, leading to enhanced photoluminescence (PL) intensity. More than that, the valence band maximum (VBM) of perovskite films was reduced, bringing about a better energy level matching the work function of the hole-injection layer (HIL) poly (3,4-ethylenedioxythiophene)-poly (styrene sulfonate) (PEDOT: PSS), which is facilitated for the hole injection, leading to a decrease in the turn-on voltage (Vth) of PeLEDs from 3.4 V for the control device to 2.6 V. Finally, the external quantum efficiency (EQE) of the sky blue PeLEDs (at 484 nm) increased from 0.09% to 0.66%. The principles of Pb(Ac)2 were thoroughly investigated by using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). This work provides a simple and effective strategy for improving the morphology of perovskite and therefore the performance of PeLEDs.

Interferon gamma (IFN-γ)-sensitive TB aptasensor based on novel chitosan-indium nano-kesterite (χtCITS)-labeled DNA aptamer hairpin technology.

There has been increasing interest in the use of biosensors for diagnosis of infectious diseases such as tuberculosis (TB) due to their simplicity, affordability, and potential for point-of-care application. The incorporation of aptamer molecules and nanomaterials in biosensor fabrication explores the advantages of high-binding affinity and low immunogenicity of aptamers as well as the high surface-to-volume ratio of nanomaterials, for increased aptasensor performance. In this work, we employed a novel microwave-synthesized copper indium tin sulfide (CITS) substituted-kesterite nanomaterial, together with a natural biopolymer (chitosan), for signal amplification and increased loading of aptamer molecules. Study of the optical properties of CITS nanomaterials showed strong absorption in the UV region characteristic of kesterite semiconductor nanomaterials. X-ray diffraction analysis confirmed the presence of the kesterite phase with average crystallite size of 6.188 nm. Fabrication of interferon-gamma (IFN-γ) TB aptasensor with a chitosan-CITS nanocomposite (χtCITS) increased the aptasensor's electrochemical properties by 77.5 % and improved aptamer loading by 73.7 %. The aptasensor showed excellent sensitivity to IFN-γ concentrations with limit of detection of 6885 fg/mL (405 fM) and linear range of 850-17000 fg/mL (50 - 1000 fM). The aptasensor also exhibited excellent storage and electrochemical stability, with good selectivity towards IFN-γ and possible real sample application.

Carbon Nanostructured Immunosensing of Anti-SARS-CoV-2 S-Protein Antibodies.

The rampant spread and death rate of the recent coronavirus pandemic related to the SARS-CoV-2 respiratory virus have underscored the critical need for affordable, portable virus diagnostics, particularly in resource-limited settings. Moreover, efficient and timely monitoring of vaccine efficacy is needed to prevent future widespread infections. Electrochemical immunosensing poses an effective alternative to conventional molecular spectroscopic approaches, offering rapid, cost-effective, sensitive, and portable electroanalysis of disease biomarkers and antibodies; however, efforts to improve binding efficiency and sensitivity are still being investigated. Graphene quantum dots (GQDs) in particular have shown promise in improving device sensitivity. This study reports the development of a GQD-functionalized point-of-contamination device leveraging the selective interactions between SARS-CoV-2-specific Spike (S) Protein receptor binding domain (RBD) antigens and IgG anti-SARS-CoV-2-specific S-protein antibodies at screen-printed carbon electrode (SPCE) surfaces. The immunocomplexes formed at the GQD surfaces result in the interruption of the redox reactions that take place in the presence of a redox probe, decreasing the current response. Increased active surface area, conductivity, and binding via EDC/NHS chemistry were achieved due to the nanomaterial inclusion, with 5 nm, blue luminescent GQDs offering the best results. GQD concentration, EDC/NHS ratio, and RBD S-protein incubation time and concentration were optimized for the biosensor, and inter- and intra-screen-printed carbon electrode detection was investigated by calibration studies on multiple and single electrodes. The single electrode used for the entire calibration provided the best results. The label-free immunosensor was able to selectively detect anti-SARS-CoV-2 IgG antibodies between 0.5 and 100 ng/mL in the presence of IgM and other coronavirus antibodies with an excellent regression of 0.9599. A LOD of 2.028 ng/mL was found, offering comparable findings to the literature-reported values. The detection sensitivity of the sensor is further compared to non-specific IgM antibodies. The developed GQD immunosensor was compared to other low-oxygen content carbon nanomaterials, namely (i) carbon quantum dot (CQD), (ii) electrochemically reduced graphene oxide, and (iii) carbon black-functionalized devices. The findings suggest that improved electron transfer kinetics and increased active surface area of the CNs, along with surface oxygen content, aid in the detection of anti-SARS-CoV-2 IgG antibodies. The novel immunosensor suggests a possible application toward monitoring of IgG antibody production in SARS-CoV-2-vaccinated patients to study immune responses, vaccine efficacy, and lifetime to meet the demands for POC analysis in resource-limited settings.

Bode Phase Angle Signaling of a TB Disease Biomarker.

Tuberculosis (TB) is a worldwide burden whose total control and eradication remains a challenge due to factors including false positive/negative diagnoses associated with the poor sensitivity of the current diagnostics in immune-compromised and post-vaccinated individuals. As these factors complicate both diagnosis and treatment, the early diagnosis of TB is of pivotal importance towards reaching the universal vision of a TB-free world. Here, an aptasensor for signaling an interferon gamma (IFN-γ) TB biomarker at low levels is reported. The aptasensor was assembled through gold-thiol interactions between poly(3,4-propylenedioxythiophene), gold nanoparticles, and a thiol-modified DNA aptamer specific to IFN-γ. The aptasensor sensitively detected IFN-γ in spiked pleural fluid samples with a detection limit of 0.09 pg/mL within a linear range from 0.2 pg/mL to 1.2 pg/mL. The good performance of the reported aptasensor indicates that it holds the potential for application in the early diagnosis of, in addition to TB, various diseases associated with IFN-γ release in clinical samples.

Advances in paper-based electrochemical immunosensors: review of fabrication strategies and biomedical applications.

Cellulose paper-based sensing devices have shown promise in addressing the accuracy, sensitivity, selectivity, analysis time and cost of current disease diagnostic tools owing to their excellent physical and physiochemical properties, high surface-area-to-volume ratio, strong adsorption capabilities, ease of chemical functionalization for immobilization, biodegradability, biocompatibility and liquid transport by simple capillary action. This review provides a comprehensive overview of recent advancements in the field of electrochemical immunosensing for various diseases, particularly in underdeveloped regions and globally. It highlights the significant progress in fabrication techniques, fluid control, signal transduction and paper substrates, shedding light on their respective advantages and disadvantages. The primary objective of this review article is to compile recent advances in the field of electrochemical immunosensing for the early detection of diseases prevalent in underdeveloped regions and globally, including cancer biomarkers, bacteria, proteins and viruses. Herein, the critical need for new, simplistic early detection strategies to combat future disease outbreaks and prevent global pandemics is addressed. Moreover, recent advancements in fabrication techniques, including lithography, printing and electrodeposition as well as device orientation, substrate type and electrode modification, have highlighted their potential for enhancing sensitivity and accuracy.

Apoptotic effects of triterpenoids isolated from Pleiocarpa pycnantha leaves in cancer cells and molecular docking study of the interactions of camptothecin and ursolic acid with human caspase 3, caspase 9 and topoisomerase I.

The aim of this study was to examine the effects of triterpenes from Pleiocarpa pycnantha leaves on the induction of apoptotic signalling in human cells. The molecular mechanisms of triterpenes isolated from P. pycnantha leaves were investigated in vitro on HeLa, MCF-7, HT-29, and KMST-6 cells. The compounds activated several markers associated with apoptosis, viz., phosphatidylserine translocation, caspase activation, oxidative stress, and topoisomerase I inhibition. Compounds 1 and 5 were non-selective, whereas compounds 2, 3, and 4 showed potential as cancer-specific agents by selectively inducing apoptosis only on cancer cells. Theoretical studies on the interactions of compound 1 with caspases -3 and -9 and topoisomerase I were carried out through a molecular docking study and illustrated that compound 1 had an equal binding affinity with the caspases and topoisomerase I comparable to that of camptothecin. The cellular pathway activated by these compounds was dependent on the compound and the cell type.

Tb- and Eu-doped yttrium oxyselenides as novel absorber layers for superstrate thin-film photovoltaics: improved spectral optical absorption and green-red phosphor activation.

To generate and deliver alternative sustainable energy in the face of the current energy crisis, new materials that can capture solar energy and transform it into other useful energies are required. Rare-earth (RE) oxychalcogenides are now being used more frequently as up/down-conversion materials in established photovoltaic (PV) devices to boost their PV performance. Here, through an efficient microwave assisted synthesis procedure, novel nanoplate/sheet shaped nanomaterials of yttrium oxyselenide (YOSe) and its analogues doped with Tb and Eu (YOSe:Tb and YOSe:Eu) were successfully synthesized. Analyses of the structure, stability, morphology, light absorption, and electrochemistry were performed. This work showed that the parent YOSe exhibited green (543 nm) and red (615 nm) emission luminescence when doped with Tb and Eu with a luminescence quantum yield (LQY) of 0.56 and 0.53 for YOSe:Tb and YOSe:Eu nanomaterials, respectively. The surface and material conductivity of YOSe improved with the addition of the dopant elements, with the best outcome shown in YOSe:Eu, according to electrokinetic research evidenced by the enhanced current peaks, reduced charge-transfer resistance (Rct) and low impedance magnitude (Zmag) through electrochemical experiments. These improvements were induced by the distinctive properties of the dopant elements. PCEs of 0.25%, 0.67%, and 1.20% were obtained for YOSe, YOSe:Tb, and YOSe:Eu-based PV devices, respectively, using the nanomaterials as novel absorber layers in a superstrate device design. Our results can initiate further exploitation of the doped host structure for effective down-conversion NIR luminescence for applications in PV devices and to boost the PV performance of existing solar cells.

Microwave synthesis of antimony oxide graphene nanoparticles - a new electrode material for supercapacitors.

For the first time, antimony oxide nanoparticles were produced using a microwave technique and evaluated as a supercapacitor electrode. The specific capacitance derived from the material's galvanostatic charge-discharge curve was 98 F g-1 in 1 M Li2SO4 electrolyte at 0.1 A g-1 current density. The charge storage mechanism visible in the CV curve is nearly rectangular and identical to the EDLC charge storage mechanism. Additionally, antimony species were chemically attached to graphene oxide using an antimony(iii) chloride precursor and subsequently microwave aided procedures were used to convert the antimony species to SbO-G nanocomposites. The results of energy-dispersive X-ray spectroscopy demonstrated the pure character of the produced material. In a three-electrode cell arrangement, the resulting composite was electrochemically characterized. The cyclic voltammogram results showed that among the pristine SbO, graphene, and SbO-G materials, SbO-G had a higher specific capacitance value of 37.58 F g-1, at a scan rate of 10 mV s-1. The material has also demonstrated good conductivity characteristics based on electrochemical impedance spectroscopy research. After 3500 galvanostatic charge-discharge cycles, the material had excellent cycling stability of ∼100%. All the remarkable capacitive properties demonstrated by this material indicate that it can be a viable choice in the field of energy storage devices.

Novel Cytochrome P450-3A4 Enzymatic Nanobiosensor for Lapatinib (a Breast Cancer Drug) Developed on a Poly(anilino-co-4-aminobenzoic Acid-Green-Synthesised Indium Nanoparticle) Platform.

Breast cancer (BC) is one of the most common types of cancer disease worldwide and it accounts for thousands of deaths annually. Lapatinib is among the preferred drugs for the treatment of breast cancer. Possible drug toxicity effects of lapatinib can be controlled by real-time determination of the appropriate dose for a patient at the point of care. In this study, a novel highly sensitive polymeric nanobiosensor for lapatinib is presented. A composite of poly(anilino-co-4-aminobenzoic acid) co-polymer {poly(ANI-co-4-ABA)} and coffee extract-based green-synthesized indium nanoparticles (InNPs) was used to develop the sensor platform on a screen-printed carbon electrode (SPCE), i.e., SPCE||poly(ANI-co-4-ABA-InNPs). Cytochrome P450-3A4 (CYP3A4) enzyme and polyethylene glycol (PEG) were incorporated on the modified platform to produce the SPCE||poly(ANI-co-4-ABA-InNPs)|CYP3A4|PEG lapatinib nanobiosensor. Experiments for the determination of the electrochemical response characteristics of the nanobiosensor were performed with cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The nanobiosensor calibration for 0-100 ng/mL lapatinib was linear and gave limit of detection (LOD) values of 13.21 ng/mL lapatinib and 18.6 ng/mL lapatinib in physiological buffer and human serum, respectively. The LOD values are much lower than the peak plasma concentration (Cmax) of lapatinib (2.43 µg/mL), which is attained 4 h after the administration of a daily dose of 1250 mg lapatinib. The electrochemical nanobiosensor also exhibited excellent anti-interference performance and stability.

Methoxylated Flavonols and ent-Kaurane Diterpenes from the South African Helichrysum rutilans and Their Cosmetic Potential.

Chromatographic fractionation of a methanol extract of Helichrysum rutilans afforded seven known compounds. The isolated compounds were identified as 5,7,8-trihydroxy-3,6-dimethoxyflavone-8-O-2-methyl-2-butanoate (C-1), 5,7-dihydroxy-3,6,8-trimethoxyflavone (C-2), 5-hydroxy-3,6,7,8-tetramethoxyflavone (C-3), 5-hydroxy-3,6,7-trimethoxyflavone (C-4), ent-kaurenoic acid (C-5), ent-kauran-18-al (C-6), and 15-α-hydroxy-(-)-ent-kaur-16-en-19-oic acid (C-7). Compounds C-1-C-4 demonstrated high antioxidant capacities on ORAC hydroxyl radical (2.114 ± 4.01; 2.413 ± 6.20; 1.924 ± 16.40; 1.917 ± 3.91) × 106; ORAC peroxyl radical (3.523 ± 3.22; 2.935 ± 0.13; 2.431 ± 8.63; 2.814 ± 5.20) × 103 µMTE/g; and FRAP (1251.45 ± 4.18; 1402.62 ± 5.77) µMAAE/g, respectively. Moderate inhibitory activities against Fe2+-induced lipid peroxidation were observed for C-1-C-4 as IC50 values of 13.123 ± 0.34, 16.421 ± 0.92, 11.64 ± 1.72, 14.90 ± 0.06 µg/mL, respectively, while their respective anti-tyrosinase activities with IC50 values of 25.735 ± 9.62, 24.062 ± 0.61, 39.03 ± 13.12, 37.67 ± 0.98 µg/mL were also observed. All compounds demonstrated TEAC values within the range of 1105-1424 µMTE/g. The result is an indication that a methanol extract of H. rutilans might possibly be a good source of natural antioxidants against ailments caused by cellular oxidative stress and as inhibitors against skin depigmentation, as well as possible raw materials needed for slowing down perishable agricultural products. This is the first report on the phytochemical and biological evaluation of H. rutilans.

Seed Priming with MeJa Prevents Salt-Induced Growth Inhibition and Oxidative Damage in Sorghum bicolor by Inducing the Expression of Jasmonic Acid Biosynthesis Genes.

Salinity is one of the major detrimental abiotic stresses at the forefront of deterring crop productivity globally. Although the exogenous application of phytohormones has formerly proven efficacious to plants, their effect on the moderately stress-tolerant crop "Sorghum bicolor" remains elusive. To investigate this, S. bicolor seeds primed with methyl jasmonate (0; 10 and 15 µM MeJa) were exposed to salt (200 mM NaCl) stress, and their morpho-physiological, biochemical, and molecular attributes were measured. Salt stress significantly decreased shoot length and fresh weight by 50%, whereas dry weight and chlorophyll content were decreased by more than 40%. Furthermore, salt-stress-induced oxidative damage was evident by the formation of brown formazan spots (indicative of H2O2 production) on sorghum leaves and a more than 30% increase in MDA content. However, priming with MeJa improved growth, increased chlorophyll content, and prevented oxidative damage under salt stress. While 15 µM MeJa maintained proline content to the same level as the salt-stressed samples, total soluble sugars were maintained under 10 µM MeJa, indicating a high degree of osmotic adjustment. Shriveling and thinning of the epidermis and xylem tissues due to salt stress was prevented by MeJa, followed by a more than 70% decrease in the Na+/K+ ratio. MeJa also reversed the FTIR spectral shifts observed for salt-stressed plants. Furthermore, salt stress induced the expression of the jasmonic acid biosynthesis genes; linoleate 92-lipoxygenase 3, allene oxide synthase 1, allene oxide cyclase, and 12-oxophytodienoate reductase 1. In MeJa-primed plants, their expression was reduced, except for the 12-oxophytodienoate reductase 1 transcript, which further increased by 67%. These findings suggest that MeJa conferred salt-stress tolerance to S. bicolor through osmoregulation and synthesis of JA-related metabolites.

A Liquid Metal Microdroplets Initialized Hemicellulose Composite for 3D Printing Anode Host in Zn-Ion Battery.

Maintaining a steady affinity between gallium-based liquid metals (LM) and polymer binders, particularly under continuous mechanical deformation, such as extrusion-based 3D printing or plating/stripping of Zinc ion (Zn2+ ), is very challenging. Here, an LM-initialized polyacrylamide-hemicellulose/EGaIn microdroplets hydrogel is used as a multifunctional ink to 3D-print self-standing scaffolds and anode hosts for Zn-ion batteries. The LM microdroplets initiate acrylamide polymerization without additional initiators and cross-linkers, forming a double-covalent hydrogen-bonded network. The hydrogel acts as a framework for stress dissipation, enabling recovery from structural damage due to the cyclic plating/stripping of Zn2+ . The LM-microdroplet-initialized polymerization with hemicelluloses can facilitate the production of 3D printable inks for energy storage devices.

Quantum Dot-Sensitised Estrogen Receptor-α-Based Biosensor for 17ß-Estradiol.

17ß-estradiol (E2) is an important natural female hormone that is also classified as an estrogenic endocrine-disrupting compound (e-EDC). It is, however, known to cause more damaging health effects compared to other e-EDCs. Environmental water systems are commonly contaminated with E2 that originates from domestic effluents. The determination of the level of E2 is thus very crucial in both wastewater treatment and in the aspect of environmental pollution management. In this work, an inherent and strong affinity of the estrogen receptor-α (ER-α) for E2 was used as a basis for the development of a biosensor that was highly selective towards E2 determination. A gold disk electrode (AuE) was functionalised with a 3-mercaptopropionic acid-capped tin selenide (SnSe-3MPA) quantum dot to produce a SnSe-3MPA/AuE electroactive sensor platform. The ER-α-based biosensor (ER-α/SnSe-3MPA/AuE) for E2 was produced by the amide chemistry of carboxyl functional groups of SnSe-3MPA quantum dots and the primary amines of ER-α. The ER-α/SnSe-3MPA/AuE receptor-based biosensor exhibited a formal potential (E0') value of 217 ± 12 mV, assigned as the redox potential for monitoring the E2 response using square-wave voltammetry (SWV). The response parameters of the receptor-based biosensor for E2 include a dynamic linear range (DLR) value of 1.0-8.0 nM (R2 = 0.99), a limit of detection (LOD) value of 1.69 nM (S/N = 3), and a sensitivity of 0.04 µA/nM. The biosensor exhibited high selectivity for E2 and good recoveries for E2 determination in milk samples.

Bioanalytical methods encompassing label-free and labeled tuberculosis aptasensors: A review.

The high incidence of tuberculosis (TB) infection is of great concern world-wide. The traditional TB diagnostic techniques are not ideal for TB diagnosis in resource-poor countries. This is due to their high complexity, expensive nature, long time duration, poor sensitivity and specificity, as well as their requirement for sophisticated laboratories with special biosafety conditions. These limitations are major factors contributing to late diagnosis of TB and its continuous persistence. Biosensors offer several advantages as diagnostic tool due to their independence on Mycobacterium tuberculosis, simplicity, low-cost, high sensitivity and specificity. Likewise, the increasing interest on aptamers as biorecognition elements in biosensor application lies in their ease of synthesis and modification, chemical and thermal stability, low-cost, and high sensitivity and specificity towards their targets. Several research works have been done and many more are still on-going on fabrication and application of aptasensors for TB diagnosis. This review summarizes the label-free and label-based electrochemical, piezoelectric and optical aptasensors for TB diagnosis published in the last decade. It focuses on their various aptamer sequence modifications, assay formats, sensitivities, nanomaterial and enzyme-based signal amplification strategies, and the possibility of miniaturization and automation using microfluidic devices.

Pseudocapacitive Effects of Multi-Walled Carbon Nanotubes-Functionalised Spinel Copper Manganese Oxide.

Spinel copper manganese oxide nanoparticles combined with acid-treated multi-walled carbon nanotubes (CuMn2O4/MWCNTs) were used in the development of electrodes for pseudocapacitor applications. The CuMn2O4/MWCNTs preparation involved initial synthesis of Mn3O4 and CuMn2O4 precursors followed by an energy efficient reflux growth method for the CuMn2O4/MWCNTs. The CuMn2O4/MWCNTs in a three-electrode cell assembly and in 3 M LiOH aqueous electrolyte exhibited a specific capacitance of 1652.91 F g-1 at 0.5 A g-1 current load. Similar investigation in 3 M KOH aqueous electrolyte delivered a specific capacitance of 653.41 F g-1 at 0.5 A g-1 current load. Stability studies showed that after 6000 cycles, the CuMn2O4/MWCNTs electrode exhibited a higher capacitance retention (88%) in LiOH than in KOH (64%). The higher capacitance retention and cycling stability with a Coulombic efficiency of 99.6% observed in the LiOH is an indication of a better charge storage behaviour in this electrolyte than in the KOH electrolyte with a Coulombic efficiency of 97.3%. This superior performance in the LiOH electrolyte than in the KOH electrolyte is attributed to an intercalation/de-intercalation mechanism which occurs more easily in the LiOH electrolyte than in the KOH electrolyte.

Microscopic, Spectroscopic, and Electrochemical Characterization of Novel Semicrystalline Poly(3-hexylthiophene)-Based Dendritic Star Copolymer.

In this study, electron-donating semicrystalline generation 1 poly(propylene thiophenoimine)-co-poly(3-hexylthiophene) star copolymer, G1PPT-co-P3HT was chemically prepared for the first time. Copolymerization was achieved with high molecular weight via facile green oxidative reaction. 1H NMR analyses of the star copolymer demonstrated the presence of 84% regioregular (rr) head-to-tail (HT) P3HT, which accounts for the molecular ordering in some grain regions in the macromolecule's morphology, as revealed by the high-resolution scanning electron microscopy (HRSEM) and Selected Area Electron Diffraction (SAED) images, and X-ray diffraction spectroscopy (XRD) measurements. The star copolymer also exhibited good absorption properties in the ultraviolet-visible (UV-Vis) and the near infrared (NIR) spectral regions, which give rise to an optical energy bandgap value as low as 1.43 eV. A HOMO energy level at -5.53 eV, which is below the air-oxidation threshold, was obtained by cyclic voltammetry (CV). Electrochemical impedance spectroscopy (EIS) ascertained the semiconducting properties of the macromolecule, which is characterized by a charge transfer resistance, Rct, value of 3.57 kΩ and a Bode plot-phase angle value of 75°. The combination of the EIS properties of G1PPT-co-P3HT and its highly electron-donating capability in bulk heterojunction (BHJ) active layer containing a perylene derivative, as demonstrated by photoluminescence quenching coupled to the observed Förster Resonance charge transfer, suggests its suitability as an electron-donor material for optoelectronic and photovoltaic devices.

Chronocoulometric signalling of BNP using a novel quantum dot aptasensor.

This study is a first-time report of the development of a mercaptosuccinic acid-nickel selenide quantum dots (MSA-NiSe2 QDs)-based electrochemical aptasensor for brain natriuretic peptide (BNP) detection. Herein, novel MSA-NiSe2 QDs were synthesized by microwave irradiation. Microscopic and structural analysis revealed that the QDs are spherical with an average diameter of 2 nm. In the presence of the as-prepared QDs, an amine-modified DNA aptamer sequence was attached to a disposable sensing interface through 1-ethyl-3-(3-dimenthylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling chemistries. Electroanalytical analysis revealed that the developed QDs-based electrochemical aptasensor is highly selective towards BNP and successfully detected BNP in both physiological buffer and human plasma samples with detection limits of 5.45 pg mL-1 and 31.95 pg mL-1, respectively. Moreover, the results revealed a 3-fold enhancement in the loading capacity of the BNP aptamer in the presence of MSA-NiSe2 QDs. By taking advantage of the physical and electronic properties of the novel QDs these materials can be easily adapted to other diagnostic approaches.

Determination of Paracetamol on Electrochemically Reduced Graphene Oxide-Antimony Nanocomposite Modified Pencil Graphite Electrode Using Adsorptive Stripping Differential Pulse Voltammetry.

A simple, highly sensitive, accurate, and low-cost electrochemical sensor was developed for the determination of over-the-counter painkiller, paracetamol (PC). The enhanced sensing capabilities of the developed sensor were fabricated by the single-step modification of disposable pencil graphite electrodes (PGEs) with the simultaneous electrochemical reduction in graphene oxide and antimony (II) salts. For this purpose, an electrochemically reduced graphene oxide-antimony nanoparticle (ERGO-SbNP) nanocomposite material was prepared by trapping metallic nanoparticles between individual graphene sheets in the modification of PGEs. Structural characterization by FTIR and Raman spectroscopy was employed to confirm the presence of oxygen functional groups and defects in the conjugated carbon-based structure of GO. Morphological differences between the modified PGEs were confirmed by HRTEM and HRSEM for the presence of nanoparticles. The modified electrodes were further electrochemically characterized using CV and EIS. The electrooxidation of PC on an ERGO-SbNPs-PGE was achieved by adsorptive stripping differential pulse voltametric analysis in 0.1 mol·L-1 phosphate buffer solution at pH = 7.0. The optimum current response was used to record a detection limit of 0.057 µmol·L-1 for PC. The electrochemical sensor was further used in real sample analysis for a commercially available pharmaceutical tablet (500 mg PC), for which the percentage recovery was between 99.4% and 100.8%.

Alpha-Glucosidase and Alpha-Amylase Inhibitory Activities, Molecular Docking, and Antioxidant Capacities of Plectranthus ecklonii Constituents.

Shortage in insulin secretion or degradation of produced insulin is the principal characteristic of the metabolic disorder of diabetes mellitus (DM). However, because the current medications for the treatment of DM have many detrimental side effects, it is necessary to develop more effective antidiabetic drugs with minimal side effects. Alpha-glucosidase and alpha-amylase inhibitors are directly implicated in the delay of carbohydrate digestion. Pharmacologically, these inhibitors could be targeted for the reduction in glucose absorption rate and, subsequently, decreasing the postprandial rise in plasma glucose and the risk for long-term diabetes complications. The main objectives of this research study were to isolate different phytochemical constituents present in the methanolic extract of Plectranthusecklonii and evaluate their alpha-glucosidase and alpha-amylase inhibitory activities and antioxidant capacity. The phytochemical investigation of the methanolic extract of P. ecklonii yielded three known compounds, viz. parvifloron D, F, and G (1-3, respectively). Parvifloron G was isolated for the first time from P. ecklonii. The in vitro bio-evaluation of the methanolic extract of P. ecklonii and its isolated compounds against alpha-glucosidase showed that 3 exhibited moderate inhibitory activity with IC50 values of 41.3 ± 1.2 µg/mL. Molecular docking analysis confirmed the alpha-glucosidase inhibitory activity demonstrated by 3. Additionally, strong antioxidant capacities were demonstrated by 3 and 1 on ORAC (28726.1 ± 8.1; 3942.9.6.6 ± 0.1 µM TE/g), respectively, which were comparable with the reference antioxidant epigallocatechingallate (EGCG). Furthermore, 3 also showed strong activity on TEAC (3526.1 ± 0.6 µM TE/g), followed by 2 (1069.3 ± 2.4 µM TE/g), as well as on FRAP (1455.4 ± 2.0 µM AAE/g). The methanolic extract of P. ecklonii is a rich source of abietane diterpenes with strong antioxidant activities. This is the first scientific report on alpha-glucosidase and alpha-amylase inhibitory activities, molecular docking, and antioxidant capacities of P. ecklonii constituents.

π-Conjugated Polymers and Their Application in Organic and Hybrid Organic-Silicon Solar Cells.

The evolution and emergence of organic solar cells and hybrid organic-silicon heterojunction solar cells have been deemed as promising sustainable future technologies, owing to the use of π-conjugated polymers. In this regard, the scope of this review article presents a comprehensive summary of the applications of π-conjugated polymers as hole transporting layers (HTLs) or emitters in both organic solar cells and organic-silicon hybrid heterojunction solar cells. The different techniques used to synthesize these polymers are discussed in detail, including their electronic band structure and doping mechanisms. The general architecture and principle of operating heterojunction solar cells is addressed. In both discussed solar cell types, incorporation of π-conjugated polymers as HTLs have seen a dramatic increase in efficiencies attained by these devices, owing to the high transmittance in the visible to near-infrared region, reduced carrier recombination, high conductivity, and high hole mobilities possessed by the p-type polymeric materials. However, these cells suffer from long-term stability due to photo-oxidation and parasitic absorptions at the anode interface that results in total degradation of the polymeric p-type materials. Although great progress has been seen in the incorporation of conjugated polymers in the various solar cell types, there is still a long way to go for cells incorporating polymeric materials to realize commercialization and large-scale industrial production due to the shortcomings in the stability of the polymers. This review therefore discusses the progress in using polymeric materials as HTLs in organic solar cells and hybrid organic-silicon heterojunction solar cells with the intention to provide insight on the quest of producing highly efficient but less expensive solar cells.