Antimicrobial activity and chemical profile of wood vinegar from eucalyptus (Eucalyptus urophylla x Eucalyptus grandis - clone I144) and bamboo (Bambusa vulgaris).

Microbial resistance to drugs is a public health problem; therefore, there is a search for alternatives to replace conventional products with natural agents. One of the potential antimicrobial agents is wood vinegar derived from the carbonization of lignocellulosic raw materials. The objectives of the present work were to evaluate the antibacterial and antifungal action of two kinds of wood vinegar (WV), one of Eucalyptus urograndis wood and another of Bambusa vulgaris biomass, and determine their chemical profile. The antimicrobial effect was assessed against Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella enteritidis, Escherichia coli, Streptococcus agalactiae, and Candida albicans. The minimum inhibitory concentration and the minimum bactericidal and fungicidal concentrations were determined. Micrographs of the microorganisms before and after exposure to both kinds of wood vinegar were obtained by scanning electron microscopy. The chemical profile of the eucalyptus and bamboo vinegar was carried out by gas chromatography and mass spectrometry (GC/MS). Both types of WV presented significant antimicrobial activity, with the bamboo one having a higher efficiency. Both studied pyroligneous extracts seem promising for developing natural antimicrobials due to their efficiency against pathogens. GC/MS analyses demonstrated that the chemical profiles of both kinds of WV were similar but with some significant differences. The major component of the eucalyptus vinegar was furfural (17.2%), while the bamboo WV was phenol (15.3%). Several compounds in both WVs have proven antimicrobial activity, such as acetic acid, furfural, phenol, cresols, guaiacol, and xylenols. Together, they are the major in the chemical composition of the organic fraction of both WVs. Bamboo vinegar had a more expressive content of organic acids. Micrographs of microorganisms taken after exposure to both kinds of wood vinegar displayed several cell modifications. The potential of both types of wood vinegar as a basis for natural antimicrobial products seems feasible due to their proven effect on inhibiting the microorganisms' growth assessed in this experiment.

A Novel Approach to Charcoal Fine Waste: Sustainable Use as Filling of Polymeric Matrices.

Most composites produced come from fossil fuel sources. Renewable strategies are needed for the production of composites. Charcoal fines are considered waste and an alternative for the production of biocomposites. The charcoal fines resulting from the pyrolysis of any biomass are an efficient alternative for the production of green composites. Studies to understand how the pyrolysis parameters influence the properties of this material for the production of biocomposites are necessary. Charcoal has a high carbon content and surface area, depending on final production temperatures. This study aims to evaluate charcoal fines as potential reinforcing agents in biocomposites. This study investigated for the first time charcoal fines from three pyrolysis temperatures (400, 600, and 800 °C) to identify the most suitable charcoal for use as a raw material in the production of carbon biocomposites with 30% by weight incorporated into a polyester matrix composite. Apparent density, porosity, morphology, and immediate chemical composition and Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) of charcoal fines were evaluated. The charcoal fines produced at 800 °C showed interesting potential as polymeric matrix fillers due to their higher porosity (81.08%), fixed carbon content (96.77%), and hydrophobicity. The biocomposites were analyzed for flexural and tensile strength and scanning electron microscopy. The results revealed an improvement in resistance at elevated temperatures, especially at 800 °C, with higher breaking strength (84.11 MPa), modulus of elasticity (4064.70 MPa), and traction (23.53 MPa). Scanning electron microscopy revealed an improvement in morphology, with a decrease in roughness at 800 °C, which caused greater adhesion to the polyester matrix. These results revealed a promising new biocomposite compared to other natural lignocellulosic polymeric composites (NLFs) in engineering applications.