Migration of Quaternary Ammonium Cations from Exfoliated Clay/Low-Density Polyethylene Nanocomposites into Food Simulants.

Clay/polymer nanocomposites (CPNs) are polymers incorporating refined clay particles that are frequently functionalized with quaternary ammonium cations (QACs) as dispersion aids. There is interest in commercializing CPNs for food contact applications because they have improved strength and barrier properties, but there are few studies on the potential for QACs in CPNs to transfer to foods under conditions of intended use. In this study, we manufactured low-density poly(ethylene) (LDPE)-based CPNs and assessed whether QACs can migrate into several food simulants under accelerated storage conditions. QACs were found to migrate to a fatty food simulant (ethanol) at levels of ∼1.1 µg mg-1 CPN mass after 10 days at 40 °C, constituting about 4% total migration (proportion of the initial QAC content in the CPN that migrated to the simulant). QAC migration into ethanol was ∼16× higher from LDPE containing approximately the same concentration of QACs but no clay, suggesting that most QACs in the CPN are tightly bound to clay particles and are immobile. Negligible QACs were found to migrate into aqueous, alcoholic, or acidic simulants from CPNs, and the amount of migrated QACs was also found to scale with the temperature and the initial clay concentration. The migration data were compared to a theoretical diffusion model, and it was found that the diffusion constant for QACs in the CPN was several orders of magnitude slower than predicted, which we attributed to the potential for QACs to migrate as dimers or other aggregates rather than as individual ions. Nevertheless, the use of the migration model resulted in a conservative estimate of the mass transfer of QAC from the CPN test specimens.

Factors Affecting Transfer of the Heavy Metals Arsenic, Lead, and Cadmium from Diatomaceous-Earth Filter Aids to Alcoholic Beverages during Laboratory-Scale Filtration.

Filtration methods for alcoholic fermented beverages often use filter aids such as diatomaceous earth (DE), which may contain elevated amounts of the heavy metals arsenic (As), lead (Pb), and cadmium (Cd). Here, we evaluated factors affecting transfer of these heavy metals from DE to beer and wine. A laboratory-scale filtration system was used to process unfiltered ale, lager, red wine, and white wine with three types of food-grade DE. Filtrate and DE were analyzed for heavy metals using ICP-MS, in addition to LC-ICP-MS for As-speciation analysis. Use of 2 g/L DE containing 5.4 mg/kg soluble inorganic As (iAs) for filtering beer and wine resulted in significant ( p < 0.05) increases of 11.2-13.7 µg/L iAs in the filtered beverage. There was a significant ( p < 0.05) effect from the DE quantity used in filtration on the transfer of iAs in all beverage types, whereas no alterations were observed for Pb and Cd levels. Methods to wash DE using water, citric acid, or EDTA all significantly ( p < 0.05) reduced iAs concentrations, whereas only EDTA significantly reduced Pb levels. Cd concentrations were not affected by any wash method. These data indicate that specific steps can be taken to limit heavy-metal transfer from DE filter aids to beer and wine.

High Throughput Quantification of Quaternary Ammonium Cations in Food Simulants by Flow-Injection Mass Spectrometry.

Background: A flow-injection MS (FI/MS) method was evaluated for the quantitation of quaternary ammonium cations (QACs) in simple food simulants. Methods: The calibration standard was dimethyldioctadecyl ammonium ion (C18-C18), and the internal standard was benzyldimethylhexadecyl (BDMHD) ammonium ion. Calibration standards based on the C18-C18 ion were prepared in ethanol with a range of 5 to 500 ppb and contained 100 ppb BDMHD. The mobile phase was 90 + 10 (v/v) acetonitrile-5 mM aqueous ammonium acetate and flowed directly into an electrospray source of the mass spectrometer. Detection was accomplished by single ion recording (SIR) in positive mode. Results: Calibration curves were linear with coefficients of determination above 0.995, and the LOQ was 5 ppb. Recoveries of four QACs derived from Arquad 2HT-75, a commercially available surfactant, were measured in common food simulants: ethanol, water, 10% (v/v) ethanol in water, and 3% (v/v) aqueous acetic acid. A solvent exchange procedure was employed for the three aqueous solvents, which included complete evaporation of the sample followed by reconstitution in ethanol prior to injection. The solvent exchange method minimized losses because of QAC adsorption on glass surfaces. Recoveries ranged from 74.4 ± 4.0 to 106.7 ± 6.6% for the two most abundant Arquad 2HT-75 component cations, dimethyldioctadecyl ammonium and dimethyloctadecyl-hexadecyl ammonium. Conclusions: This method is suitable to quantify trace levels of QACs in food simulants as part of exposure evaluations related to their use in emerging food contact materials.

Factors Affecting the Levels of Heavy Metals in Juices Processed with Filter Aids.

This study investigated factors that may contribute to the presence of arsenic and other heavy metals in apple and grape juices processed with filter aids. Different types and grades of filter aids were analyzed for arsenic, lead, and cadmium with inductively coupled plasma-tandem mass spectrometry. Potential factors affecting the transfer of heavy metals to juices during filtration treatments were evaluated. Effects of washing treatments on removal of heavy metals from filter aids were also determined. Results showed that diatomaceous earth (DE) generally contained a higher level of arsenic than perlite, whereas perlite had a higher lead content than DE. Cellulose contained the lowest level of arsenic among the surveyed filter aids. All samples of food-grade filter aids contained arsenic and lead levels that were below the U.S. Pharmacopeia and National Formulary limits of 10 ppm of total leachable arsenic and lead for food-grade DE filter aids. Two samples of arsenic-rich (>3 ppm) food-grade filter aids raised the level of arsenic in apple and grape juices during laboratory-scale filtration treatments, whereas three samples of low-arsenic (<1 ppm) food-grade filter aids did not affect arsenic levels in filtered juices. Filtration tests with simulated juices (pH 2.9 to 4.1, Brix [°Bx] 8.2 to 18.1, total suspended solids [TSS] 0.1 to 0.5%) showed that pH or sugar content had no effect on arsenic levels of filtered juices, whereas arsenic content of filtered juice was elevated when higher amounts of filter aid were used for filtration. Authentic unfiltered apple juice (pH 3.6, °Bx 12.9, TSS 0.4%) and grape juice (pH 3.3, °Bx 16.2, TSS 0.05%) were used to verify results obtained with simulated juices. However, body feed ratio did not affect the arsenic content of filtered authentic juices. Washing treatments were effective at reducing arsenic, but not cadmium or lead, concentrations in a DE filter aid. This study identified ways to reduce the amount of arsenic transferred to juices during filtration.

Targeted and non-targeted detection of lemon juice adulteration by LC-MS and chemometrics.

Economically motivated adulteration (EMA) of lemon juice was detected by LC-MS and principal component analysis (PCA). Twenty-two batches of freshly squeezed lemon juice were adulterated by adding an aqueous solution containing 5% citric acid and 6% sucrose to pure lemon juice to obtain 30%, 60% and 100% lemon juice samples. Their total titratable acidities, °Brix and pH values were measured, and then all the lemon juice samples were subject to LC-MS analysis. Concentrations of hesperidin and eriocitrin, major phenolic components of lemon juice, were quantified. The PCA score plots for LC-MS datasets were used to preview the classification of pure and adulterated lemon juice samples. Results showed a large inherent variability in the chemical properties among 22 batches of 100% lemon juice samples. Measurement or quantitation of one or several chemical properties (targeted detection) was not effective in detecting lemon juice adulteration. However, by using the LC-MS datasets, including both chromatographic and mass spectrometric information, 100% lemon juice samples were successfully differentiated from adulterated samples containing 30% lemon juice in the PCA score plot. LC-MS coupled with chemometric analysis can be a complement to existing methods for detecting juice adulteration.

Nontargeted detection of adulteration of skim milk powder with foreign proteins using UHPLC-UV.

Chromatographic profiles of skim milk powder (SMP) and mixtures of SMP with soy (SPI), pea (PPI), brown rice (BRP), and hydrolyzed wheat protein (HWPI) isolates were obtained by ultrahigh-performance liquid chromatography (UHPLC) with 215 nm detection. Two data analysis approaches were compared for their utility to classify samples as authentic or adulterated. The t test approach evaluated data points exceeding the 99% confidence limit of the mean authentic SMP chromatogram and used data points from the entire chromatogram. The other approach used the multivariate Q statistic from a SIMCA model of authentic samples to determine adulteration and used a selected retention window to obtain best classifications. Q-Statistic and t test correctly classified adulteration of SMP with SPI at the 1% and 3% levels, respectively, while minimizing false classifications of authentic SMP. Detection of SMP adulterated with PPI, BRP, and HWPI was possible at higher adulteration levels.

Phenolic composition, antioxidant properties, and endothelial cell function of red and white cranberry fruits.

The effects of phenolic constituents in red cranberry extracts (RCE) and white cranberry extracts (WCE) on the endothelial cell function were investigated. Peonidin-3-O-galactoside, cyanidin-3-O-arabinoside, and cyanidin-3-O-galactoside were the predominant anthocyanins characterized, whereas a procyanidin tetramer was the predominant proanthocyanidin identified. The antioxidant properties of RCE and WCE were not significantly different regardless of antioxidant assays (DPPH, FRAP, and TEAC) used. Both RCE and WCE induced the phosphorylation of Akt in vitro in human umbilical endothelial cells (HUVEC), resulting in the phosphorylation of endothelial nitric oxide synthase, cell migration, and tube formation. The enhanced phosphorylation of PI3/Akt kinase in HUVEC, endothelial cell wound healing, and tube formation elicited by RCE and WCE suggest that overall phenolic constituents rather than individual phenolic compounds within the cranberry matrix may be responsible for these biological effects.

Berry fruits modulated endothelial cell migration and angiogenesis via phosphoinositide-3 kinase/protein kinase B pathway in vitro in endothelial cells.

Polyphenolic-rich berry fruits are known to activate redox-sensitive cellular signaling molecules such as phosphatidylinositol-3-kinase (PI3 kinase)/kinase B (Akt), resulting in a cascade of downstream signaling pathways. This study investigated the ability of strawberry (SB), wild blueberry (WBB), and cranberry (CB) extracts to induce the activation of PI3 kinase/Akt signaling in vitro in human umbilical endothelial cells (HUVECs) and whether this activation would enhance cell migration and angiogenesis. Anthocyanin profiles of the extracts were characterized using HPLC-ESI/MS, and Akt activation was investigated using the Alpha Screen SureFire assay. The total anthocyanin contents of SB, WBB, and CB extracts were 81.7, 82.5, and 83.0 mg/100 g fresh weight, respectively. SB, WBB, and CB extracts activated Akt in a dose-dependent manner via PI3 kinase and induced cell migration and angiogenesis in vitro in HUVECs. The results from this study suggest that polyphenolics in berry fruits may play a role in promoting vascular health.

Extrusion cooking with glucose supplementation of fumonisin-contaminated corn grits protects against nephrotoxicity and disrupted sphingolipid metabolism in rats.

SCOPE: Fumonisin B1 (FB1) is a mycotoxin found in maize and maize-based foods. It causes animal diseases and is a suspected risk factor for cancer and birth defects in humans. Extrusion cooking reduces FB1 concentrations in maize however toxicity caused by unknown degradation or FB1-matrix reaction products might persist. METHODS AND RESULTS: To test the efficacy of extrusion to reduce FB1 toxicity, Fusarium verticillioides fermented corn (= maize) grits (Batch-1= 9.7 ppm FB1; Batch-2= 50 ppm FB1) were extruded without (Batch-1E; Batch-2E) or with 10% glucose supplementation (Batch-1EG; Batch-2EG). FB1 concentrations were reduced 64% (Batch-2E) to 94% (Batch-1EG) after cooking. When the uncooked and processed grits were fed (50% w/w in rodent chow) to rats for up to 8 weeks, FB1 intakes averaged 354, 103, and 25.1 çg/kg body weight/day for Batch-1, Batch-1E and Batch-1EG and 1804, 698, and 222 çg/kg body weight/day for the Batch-2, Batch-2E and Batch-2EG, respectively. Nephrotoxicity including apoptotic lesions and elevated sphingoid base concentrations decreased in a dose-dependent manner in groups fed Batch-1, Batch-1E, Batch-2, Batch-2E, or Batch-2EG and was absent in the Batch-1EG group. CONCLUSION: Extrusion cooking, especially with glucose supplementation, is potentially useful to reduce FB1 concentrations and toxicity of FB1-contaminated maize.

Determination of protein levels in soy and peanut oils by colorimetric assay and ELISA.

Analytical methods are needed for measuring the levels of protein from allergenic food transferred into cooking oil. A simple method for determination of total protein in cooking oils was developed. Oil was extracted with phosphate-buffered saline with 0.05% Tween (PBST) and the extracts were partitioned with hexane to remove residual oil. Total protein in the PBST extracts was assayed with bicinchoninic acid (BCA), micro-BCA, reducing-agent compatible BCA and CB-XT kits. These methods were used to measure recovery of protein from peanut butter spikes of soy and peanut oil in the range of 50-1000 ppm. Recoveries were generally above 70%. However, the BCA and micro-BCA assays were subject to interference and enhanced color formation which were probably due to co-extracted antioxidants present in oil. The reducing agent-compatible BCA and CB-X protein assays reduced interference and gave lower protein values in crude, cold-pressed, and refined peanut oils. Heating oil to 180 degrees C before extraction also reduced interference-induced color enhancement. A commercial ELISA test kit was also used to measure peanut protein in oil spiked with peanut butter. Recovery of peanut residues measured by ELISA was significantly decreased when the peanut butter-spiked oil was heated to 180 degrees C compared to unheated oil. Recovery of spiked peanut butter protein measured by the buffer extraction-colorimetric method was not decreased in heated oil. The method developed here could be used to determine protein levels in crude and refined oil, and to assess the potential for allergen cross-contact from reused cooking oil.

HPLC-UV method for nicotine, strychnine, and aconitine in dairy products.

The toxic nitrogen alkaloids nicotine, strychnine, and aconitine were quantitated in whole milk, skim milk, and cream using solid-phase extraction cleanup and HPLC-UV with dual wavelength detection. Samples were extracted in McIlvaine's buffer with EDTA and then partitioned with aqueous acetonitrile and hexane. The aqueous phase was concentrated and passed through an OASIS HLB column. The column was eluted with methylene chloride/ammonium hydroxide, 1 mL/1 microL, v/v. The eluent was acidified with hydrochloric acid and evaporated. The sample was diluted for HPLC with acetonitrile/phosphate buffer pH 7.4. Chromatography was performed on an Xterra RP-18 column using a gradient of acetonitrile and ammonium bicarbonate buffer at pH 9.8. Nicotine and strychnine were monitored at 260 nm; aconitine was monitored at 232 nm. Calibration curves were generated from external standards in the range 0.2-10 microg/mL using 1/x weighting. Mean recoveries in whole milk spiked between 0.1 and 10 ppm were the following: nicotine 89.2%, strychnine 75.7%, and aconitine 85.1%. Mean recoveries in skim milk spiked between 0.1 and 10 ppm were the following: nicotine 72.1%, strychnine 78.2%, and aconitine 82.9%. Mean recoveries in cream spiked between 0.2 and 20 ppm were the following: nicotine 87.9%, strychnine 76.9%, and aconitine 82.0%. Relative standard deviations of recovery were less than 20% in each case.