Duration and frequency of betel quid chewing affects periodontitis severity and life quality of people in Tanini Village, Kupang, Indonesia.

BACKGROUND: Chewing betel nuts can increase the risk of periodontal disease severity and potentially become malignant in the oral cavity. OBJECTIVE: This study aimed to investigate the effect of the duration and frequency of betel quid chewing behaviour on periodontitis severity and the life quality of people in Tanini Village, Kupang Regency, Indonesia. METHODS: The type of this study was an analytic observational study with a cross-sectional design. We used a questionnaire to obtain sociodemographic data. Oral Health Survey Basic Methods were used to measure debris index, plaque index, bleeding on probing, loss of attachment, and pocket depth. Behaviour and quality of life were measured by questionnaire and WHOQOL-BREF method as well. RESULTS: The largest number of respondents were male. Duration of chewing had a significant relationship with the frequency of chewing and periodontal status. Periodontitis was higher compared to all categories. The lifestyle of the community greatly influenced their behaviour in betel nut chewing and also affected the severity of their periodontitis and OHIs significantly. CONCLUSION: The lifestyle of betel nut chewing of the people in Tanini Village, greatly influences their behaviour. Prolonged and excessive use of betel nut induced significant adverse effects on human health. The longer and more often chew betel or areca nut, the higher the incidence of periodontitis, which significantly affects the quality of life as there is a possibility of the development of carcinogenesis, particularly in the oral cavity.

Impact of maternal and child dental anxiety on oral health-related quality of life of 5-6-year-old preschool children.

BACKGROUND: There is a lack of evidence with regards to the association between both maternal and child dental anxiety and the mother's perception of her child's oral health-related quality of life (COHRQoL). The aim of this study was to investigate the association of maternal and child dental anxiety with COHRQoL and the effect of demographic factors as moderators in this relationship. In addition, the association between child's dental caries experience and the COHRQoL was also assessed. METHODS: A cross-sectional study was conducted involving 1150, 5-6 year-old preschool children in Selangor, Malaysia. Mothers answered a questionnaire on socio-economic status, the Malay-Modified Dental Anxiety Scale to assess maternal dental anxiety, and the Malay-Early Childhood Oral Health Impact Scale to assess COHRQoL. Child's dental anxiety was assessed using the Malay-Modified Child Dental Anxiety Scale via a face-to-face interview prior to oral examination to assess dental caries. Data were analysed using structural equation modelling to assess the relationship between maternal and child dental anxiety and COHRQoL. RESULTS: Overall, complete data on 842 mother-child dyads were analysed. The mean scores of total ECOHIS, the child impacts section (CIS), and the family impacts section (FIS) were 17.7 (SD = 4.9), 12.6 (SD = 3.7), and 5.1 (SD = 1.9), respectively. The mean dental anxiety scores for mothers and children were 11.8 (SD = 4.5) and 16.9 (SD = 4.3), respectively. Maternal dental anxiety was associated with the CIS (b = 0.08, p < 0.001), the FIS (b = 0.01, p = 0.001), and the total ECOHIS (b = 0.14, p < 0.001). Maternal education level, income, urban/rural location, and kindergarten type were moderators to the relationship. In addition, there was also a significant relationship between child's dental caries experience and COHRQoL (p < 0.001). CONCLUSIONS: Maternal dental anxiety and child's dental caries experience have significantly impacted the COHRQoL, the CIS, and the FIS domains. Demographic factors such as maternal education, income, urban/rural location, and kindergarten type acted as moderators that can strengthen or weaken the relationship between maternal dental anxiety and COHRQoL of 5-6-year-old preschool children.

Cone beam computed tomography assessment of the maxillary incisive canal and foramen: considerations of anatomical variations when placing immediate implants.

INTRODUCTION: The maxillary incisive canal connects the roof of the oral cavity with the floor of nasal cavity and has the incisive and nasal foramina respectively at its two opposite ends. Its close proximity with the anterior incisors affects one's ability to place immediate implants in ideal position. OBJECTIVE: To avoid causing complication, variations in their dimensions were studied. MATERIAL AND METHODS: Images of ninety Mongoloids patients examined with i-CAT Cone Beam Computed Tomography were included. The sizes of the nasopalatine foramen, the incisive canal and foramen, and anterior maxillary bone thickness were measured. The direction and course of the canals were assessed. RESULTS: The mean labiopalatal and mesiodistal measurements of the incisive foramen were 2.80 mm and 3.49 mm respectively, while the labiopalatal width of the nasal foramen was 6.06 mm. The incisive canal was 16.33 mm long and 3.85 mm wide. The anterior maxillary bone has an average thickness of 7.63 mm. The dimensions of the incisive foramen and incisive canal, and anterior maxillary bone thickness demonstrated gender differences with males showing greater values. The anterior maxillary bone thickness was affected by age but this difference was not observed in canal dimensions. The majority of subjects have a funnel shape-like incisive canal with the broader opening located at its superior. They seem to have a longer slanted-curve canal with one channel at its middle portion and a narrower incisive foramen opening than those reported elsewhere. CONCLUSIONS: This study found that gender is an important factor that affected the characteristics of the IC and the amount of bone anterior to it. Male generally had bigger IC and thicker anterior bone. In addition, the anterior maxillary bone thickness was affected by aging, where it becomes thinner with increased age even though the subjects were fully dentate.

Effect of ferrule height and glass fibre post length on fracture resistance and failure mode of endodontically treated teeth.

The purpose of this study was to evaluate the combined effect of ferrule height and post length on fracture resistance and failure mode of endodontically treated teeth restored with glass fibre posts, composite resin cores and crowns. Ninety human maxillary central incisors were endodontically treated and divided into three groups (n = 30) according to the ferrule heights: 4, 2 and 0 mm, respectively. Post spaces in each group were prepared at 2/3, 1/2 and 1/3 of the root length (n = 10). The specimens were received fibre posts, composite resin core build up and cast metal crowns. After thermocycling, compressive static load was applied at an angle of 135° to the crowns. Two-way analysis of variance showed significant differences in the failure load in the ferrule height groups, no significant differences in post length groups and no significant interaction between ferrule heights and post lengths. More restorable failure modes were observed.

Reproducibility of facial soft tissue landmarks on facial images captured on a 3D camera.

OBJECTIVE: Fast and non-invasive systems of the three-dimensional (3D) technology are a recent trend in orthodontics. The reproducibility of facial landmarks is important so that 3D facial measurements are accurate and may-be applied clinically. The aim of this study is to evaluate the reproducibility of facial soft tissue landmarks using a non-invasive stereo-photogrammetry 3D camera. MATERIAL AND METHODS: Twenty-four soft tissue landmarks on 3D facial images captured using a VECTRA-3D dual module camera system for full face imaging (Canfield Scientific inc, Fairfield, NJ, USA) were viewed and analysed using Mirror software on 30 adult subjects (15 males and 15 females, in the age range of 20-25 years). The landmarks were identified, recorded and measured twice on each 3D facial image by one examiner after a 2-week interval. Intra-class correlations and paired t-test or Wilcoxon Rank test were performed for each landmark to assess intra-examiner reproducibility. RESULTS: Intra-class correlation coefficients for all 24 landmarks ranged from 0.68 to 0.97, indicating moderate to high reliability and reproducibility of all facial soft tissue landmarks. Paired t-tests and Wilcoxon Rank test also revealed that there were no significant differences in all 24 facial soft tissue landmarks measurements (p = 0. 17 - 0.99). CONCLUSION: The results indicated that the reproducibility of identification of landmarks by one operator on facial images captured using a VECTRA-3D camera was acceptable. This device may be useful in treatment planning and may provide accurate information in making clinical decisions. However, it is suggested that further studies on inter-examiner reproducibility should be undertaken.

Comparison of arch form between ethnic Malays and Malaysian Aborigines in Peninsular Malaysia.

OBJECTIVE: To determine and compare the frequency distribution of various arch shapes in ethnic Malays and Malaysian Aborigines in Peninsular Malaysia and to investigate the morphological differences of arch form between these two ethnic groups. METHODS: We examined 120 ethnic Malay study models (60 maxillary, 60 mandibular) and 129 Malaysian Aboriginal study models (66 maxillary, 63 mandibular). We marked 18 buccal tips and incisor line angles on each model, and digitized them using 2-dimensional coordinate system. Dental arches were classified as square, ovoid, or tapered by printing the scanned images and superimposing Orthoform arch templates on them. RESULTS: The most common maxillary arch shape in both ethnic groups was ovoid, as was the most common mandibular arch shape among ethnic Malay females. The rarest arch shape was square. Chi-square tests, indicated that only the distribution of the mandibular arch shape was significantly different between groups (p = 0.040). However, when compared using independent t-tests, there was no difference in the mean value of arch width between groups. Arch shape distribution was not different between genders of either ethnic group, except for the mandibular arch of ethnic Malays. CONCLUSIONS: Ethnic Malays and Malaysian Aborigines have similar dental arch dimensions and shapes.