RESUMO
Nanosized zeolite particles are important materials for many applications in the field of nanotechnology. The possible adverse effects of these nanomaterials on human health have been scarcely investigated and remain largely unknown. This study reports the synthesis of nanozeolites Y and A with particle sizes of 25-100 nm and adequate colloidal stability for in vitro cytotoxicity experiments. The cytotoxic response of macrophages, epithelial and endothelial cells to these nanocrystals was assessed by determining mitochondrial activity (MTT assay) and cell membrane integrity (LDH leakage assay). After 24 h of exposure, no significant cytotoxic activity was detected for nanozeolite doses up to 500 µg/ml. The addition of fetal calf serum to the cell culture medium during exposure did not significantly change this low response. The nanozeolites showed low toxicity compared with monodisperse amorphous silica nanoparticles of similar size (60 nm). These results may contribute to the application of safe nanozeolites for purposes such as medical imaging, sensing materials, low-k films and molecular separation processes.
Assuntos
Nanopartículas/toxicidade , Zeolitas/toxicidade , Análise de Variância , Agregação Celular/efeitos dos fármacos , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Humanos , Concentração de Íons de Hidrogênio , Nanopartículas/química , Tamanho da Partícula , Zeolitas/químicaRESUMO
Hexagonally ordered mesoporous silica coined COK-12 was synthesized in a continuous process by combining streams of sodium silicate and citric acid/sodium citrate buffered solution of (ethylene oxide)(20)-(propylene oxide)(70)-(ethylene oxide)(20) triblock copolymer (Pluronic P123) from separate reservoirs. COK-12 precipitated spontaneously upon combining both streams at nearly neutral pH and ambient temperature. Stable intermediates of the COK-12 formation process could be prepared by limiting sodium silicate addition. Investigation of these intermediates using small-angle X-ray scattering revealed COK-12 formed via an assembly process departing from spherical uncharged core-shell P123-silica micelles. The sterical stabilization of these micelles decreased upon accumulation of silicate oligomers in their shell. Aggregation of the spherical micelles led to cylindrical micelles, which aligned and adopted the final hexagonal organization. This unprecedentedly fast formation of P6m ordered mesoporous silica was caused by two factors in the synthesis medium: the neutral pH favoring uncharged silicate oligomers and the high salt concentration promoting hydrophobic interactions with surfactant micelles leading to silica accumulation in the PEO shell. The easy continuous synthesis process is convenient for large-scale production. The platelet particle morphology with short and identical internal channels will be advantageous for many applications such as pore replication, nanotube or fiber growth, catalytic functionalization, drug delivery, film and sensor development, and in nano dyes as well as for investigation of pore diffusion phenomena.
Assuntos
Nanoestruturas/ultraestrutura , Dióxido de Silício/síntese química , Ácido Cítrico/química , Compostos de Epóxi/química , Óxido de Etileno/química , Nanoestruturas/química , Poloxâmero/química , Porosidade , Silicatos/química , Dióxido de Silício/químicaRESUMO
Titania/silica composites with different Ti/Si ratios are synthesized via a nonconventional synthesis route. The synthesis involves non-aqueous reaction of metal alkoxides and formic acid at 75 °C in supercritical carbon dioxide. The as-prepared composite materials contain nanometer-sized anatase crystallites and amorphous silica. Large specific surface areas are obtained. The composites are evaluated in the photocatalytic degradation of phenol in aqueous medium, and in the elimination of acetaldehyde from air. The highest photocatalytic activity in both processes is achieved with a composite containing 40â wt % TiO2.
Assuntos
Dióxido de Carbono/química , Fenol/química , Dióxido de Silício/química , Titânio/química , Poluentes Químicos da Água/química , Catálise , Recuperação e Remediação Ambiental/métodos , Formiatos/química , Microscopia Eletrônica de Transmissão , Óxidos/química , Fenol/efeitos da radiação , Fotólise , Difração de Pó , Espectrometria por Raios X , Espectrofotometria Infravermelho , Raios Ultravioleta , Poluentes Químicos da Água/efeitos da radiaçãoRESUMO
The purpose of this study was to improve our understanding of the molecular organization of hydrophobic guest molecules in the presence of co-adsorbed water inside SBA-15 ordered mesoporous silica material. Understanding this adsorption competition is essential in the development of applications of controlled adsorption and desorption. The poorly water soluble drug compound itraconazole and the fluorescent probe Nile red were selected for the study. The interaction between itraconazole and SBA-15 was investigated using FT-IR, (1)H MAS NMR and (29)Si MAS NMR spectroscopy, by determination of adsorption isotherms and release kinetics in simulated gastric fluid. The distribution and migration of the hydrophobic fluorescent probe Nile red was visualized in situ using confocal fluorescence microscopy. For both molecules, there was a pronounced influence of the co-adsorbed water on adsorption, hydrophobic aggregation and migration in SBA-15 pores. These insights contribute to the development of practical methods for loading ordered mesoporous silica materials with hydrophobic molecules.
Assuntos
Interações Hidrofóbicas e Hidrofílicas , Dióxido de Silício/química , Água/química , Adsorção , Itraconazol/química , Espectroscopia de Ressonância Magnética , Oxazinas/química , Porosidade , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The ordered mesoporous silica material SBA-15 was loaded with the model drugs itraconazole and ibuprofen using three different procedures: (i) adsorption from solution, (ii) incipient wetness impregnation, and (iii) heating of a mixture of drug and SBA-15 powder. The location of the drug molecules in the SBA-15 particles and molecular interactions were investigated using nitrogen adsorption, TGA, DSC, DRS UV-vis, and XPS. The in vitro release of hydrophobic model drugs was evaluated in an aqueous environment simulating gastric fluid. The effectiveness of the loading method was found to be strongly compound dependent. Incipient wetness impregnation using a concentrated itraconazole solution in dichloromethane followed by solvent evaporation was most efficient for dispersing itraconazole in SBA-15. The itraconazole molecules were located on the mesopore walls and inside micropores of the mesopore walls. When SBA-15 was loaded by slurrying it in a diluted itraconazole solution from which the solvent was evaporated, the itraconazole molecules ended up in the mesopores that they plugged locally. At a loading of 30 wt %, itraconazole exhibited intermolecular interactions inside the mesopores revealed by UV spectroscopy and endothermic events traced with DSC. The physical mixing of itraconazole and SBA-15 powder followed by heating above the itraconazole melting temperature resulted in formulations in which glassy itraconazole particles were deposited externally on the SBA-15 particles. Loading with ibuprofen was successful with each of the three loading procedures. Ibuprofen preferably is positioned inside the micropores. In vitro release experiments showed fast release kinetics provided the drug molecules were evenly deposited over the mesoporous surface.
Assuntos
Ibuprofeno/química , Itraconazol/química , Dióxido de Silício/química , Água/química , Varredura Diferencial de Calorimetria , Simulação por Computador , Estrutura Molecular , Porosidade , SolubilidadeRESUMO
This study aims to evaluate the in vivo performance of ordered mesoporous silica (OMS) as a carrier for poorly water soluble drugs. Itraconazole was selected as model compound. Physicochemical characterization was carried out by SEM, TEM, nitrogen adsorption, DSC, TGA and in vitro dissolution. After loading itraconazole into OMS, its oral bioavailability was compared with the crystalline drug and the marketed product Sporanox in rabbits and dogs. Plasma concentrations of itraconazole and OH-itraconazole were determined by HPLC-UV. After administration of crystalline itraconazole in dogs (20mg), no systemic itraconazole could be detected. Using OMS as a carrier, the AUC0-8 was boosted to 681+/-566 nM h. In rabbits, the AUC0-24 increased significantly from 521+/-159 nM h after oral administration of crystalline itraconazole (8 mg) to 1069+/-278 nM h when this dose was loaded into OMS. Tmax decreased from 9.8+/-1.8 to 4.2+/-1.8h. No significant differences (AUC, Cmax, and Tmax) could be determined when comparing OMS with Sporanox in both species. The oral bioavailability of itraconazole formulated with OMS as a carrier compares well with the marketed product Sporanox, in rabbits as well as in dogs. OMS can therefore be considered as a promising carrier to achieve enhanced oral bioavailability for drugs with extremely low water solubility.