Connexin 30 locally controls actin cytoskeleton and mechanical remodeling in motile astrocytes.

During brain maturation, astrocytes establish complex morphologies unveiling intense structural plasticity. Connexin 30 (Cx30), a gap-junction channel-forming protein expressed postnatally, dynamically regulates during development astrocyte morphological properties by controlling ramification and extension of fine processes. However, the underlying mechanisms remain unexplored. Here, we found in vitro that Cx30 interacts with the actin cytoskeleton in astrocytes and inhibits its structural reorganization and dynamics during cell migration. This translates into an alteration of local physical surface properties, as assessed by correlative imaging using stimulated emission depletion (STED) super resolution imaging and atomic force microscopy (AFM). Specifically, Cx30 impaired astrocyte cell surface topology and cortical stiffness in motile astrocytes. As Cx30 alters actin organization, dynamics, and membrane physical properties, we assessed whether it controls astrocyte migration. We found that Cx30 reduced persistence and directionality of migrating astrocytes. Altogether, these data reveal Cx30 as a brake for astrocyte structural and mechanical plasticity.

Reliable, standardized measurements for cell mechanical properties.

Atomic force microscopy (AFM) has become indispensable for studying biological and medical samples. More than two decades of experiments have revealed that cancer cells are softer than healthy cells (for measured cells cultured on stiff substrates). The softness or, more precisely, the larger deformability of cancer cells, primarily independent of cancer types, could be used as a sensitive marker of pathological changes. The wide application of biomechanics in clinics would require designing instruments with specific calibration, data collection, and analysis procedures. For these reasons, such development is, at present, still very limited, hampering the clinical exploitation of mechanical measurements. Here, we propose a standardized operational protocol (SOP), developed within the EU ITN network Phys2BioMed, which allows the detection of the biomechanical properties of living cancer cells regardless of the nanoindentation instruments used (AFMs and other indenters) and the laboratory involved in the research. We standardized the cell cultures, AFM calibration, measurements, and data analysis. This effort resulted in a step-by-step SOP for cell cultures, instrument calibration, measurements, and data analysis, leading to the concordance of the results (Young's modulus) measured among the six EU laboratories involved. Our results highlight the importance of the SOP in obtaining a reproducible mechanical characterization of cancer cells and paving the way toward exploiting biomechanics for diagnostic purposes in clinics.

Electropolymerization processing of side-chain engineered EDOT for high performance microelectrode arrays.

Microelectrode Arrays (MEAs) are popular tools for in vitro extracellular recording. They are often optimized by surface engineering to improve affinity with neurons and guarantee higher recording quality and stability. Recently, PEDOT:PSS has been used to coat microelectrodes due to its good biocompatibility and low impedance, which enhances neural coupling. Herein, we investigate on electro-co-polymerization of EDOT with its triglymated derivative to control valence between monomer units and hydrophilic functions on a conducting polymer. Molecular packing, cation complexation, dopant stoichiometry are governed by the glycolation degree of the electro-active coating of the microelectrodes. Optimal monomer ratio allows fine-tuning the material hydrophilicity and biocompatibility without compromising the electrochemical impedance of microelectrodes nor their stability while interfaced with a neural cell culture. After incubation, sensing readout on the modified electrodes shows higher performances with respect to unmodified electropolymerized PEDOT, with higher signal-to-noise ratio (SNR) and higher spike counts on the same neural culture. Reported SNR values are superior to that of state-of-the-art PEDOT microelectrodes and close to that of state-of-the-art 3D microelectrodes, with a reduced fabrication complexity. Thanks to this versatile technique and its impact on the surface chemistry of the microelectrode, we show that electro-co-polymerization trades with many-compound properties to easily gather them into single macromolecular structures. Applied on sensor arrays, it holds great potential for the customization of neurosensors to adapt to environmental boundaries and to optimize extracted sensing features.

Precision of neuronal localization in 2D cell cultures by using high-performance electropolymerized microelectrode arrays correlated with optical imaging.

Recently, the development of electronic devices to extracellularly record the simultaneous electrical activities of numerous neurons has been blooming, opening new possibilities to interface and decode neuronal activity. In this work, we tested how the use of EDOT electropolymerization to tune post-fabrication materials could optimize the cell/electrode interface of such devices. Our results showed an improved signal-to-noise ratio, better biocompatibility, and a higher number of neurons detected in comparison with gold electrodes. Then, using such enhanced recordings with 2D neuronal cultures combined with fluorescent optical imaging, we checked the extent to which the positions of the recorded neurons could be estimated solely via their extracellular signatures. Our results showed that assuming neurons behave as monopoles, positions could be estimated with a precision of approximately tens of micrometers.

PyFMLab: Open-source software for atomic force microscopy microrheology data analysis.

Background: Atomic force microscopy (AFM) is one of the main techniques used to characterize the mechanical properties of soft biological samples and biomaterials at the nanoscale. Despite efforts made by the AFM community to promote open-source data analysis tools, standardization continues to be a significant concern in a field that requires common analysis procedures. AFM-based mechanical measurements involve applying a controlled force to the sample and measure the resulting deformation in the so-called force-distance curves. These may include simple approach and retract or oscillatory cycles at various frequencies (microrheology). To extract quantitative parameters, such as the elastic modulus, from these measurements, AFM measurements are processed using data analysis software. Although open tools exist and allow obtaining the mechanical properties of the sample, most of them only include standard elastic models and do not allow the processing of microrheology data. In this work, we have developed an open-source software package (called PyFMLab, as of python force microscopy laboratory) capable of determining the viscoelastic properties of samples from both conventional force-distance curves and microrheology measurements. Methods: PyFMLab has been written in Python, which provides an accessible syntax and sufficient computational efficiency. The software features were divided into separate, self-contained libraries to enhance code organization and modularity and to improve readability, maintainability, testability, and reusability. To validate PyFMLab, two AFM datasets, one composed of simple force curves and another including oscillatory measurements, were collected on HeLa cells. Results: The viscoelastic parameters obtained on the two datasets analysed using PyFMLab were validated against data processing proprietary software and against validated MATLAB routines developed before obtaining equivalent results. Conclusions: Its open-source nature and versatility makes PyFMLab an open-source solution that paves the way for standardized viscoelastic characterization of biological samples from both force-distance curves and microrheology measurements.

Optineurin links Hace1-dependent Rac ubiquitylation to integrin-mediated mechanotransduction to control bacterial invasion and cell division.

Extracellular matrix (ECM) elasticity is perceived by cells via focal adhesion structures, which transduce mechanical cues into chemical signalling to conform cell behavior. Although the contribution of ECM compliance to the control of cell migration or division is extensively studied, little is reported regarding infectious processes. We study this phenomenon with the extraintestinal Escherichia coli pathogen UTI89. We show that UTI89 takes advantage, via its CNF1 toxin, of integrin mechanoactivation to trigger its invasion into cells. We identify the HACE1 E3 ligase-interacting protein Optineurin (OPTN) as a protein regulated by ECM stiffness. Functional analysis establishes a role of OPTN in bacterial invasion and integrin mechanical coupling and for stimulation of HACE1 E3 ligase activity towards the Rac1 GTPase. Consistent with a role of OPTN in cell mechanics, OPTN knockdown cells display defective integrin-mediated traction force buildup, associated with limited cellular invasion by UTI89. Nevertheless, OPTN knockdown cells display strong mechanochemical adhesion signalling, enhanced Rac1 activation and increased cyclin D1 translation, together with enhanced cell proliferation independent of ECM stiffness. Together, our data ascribe a new function to OPTN in mechanobiology.

Surface tension of model tissues during malignant transformation and epithelial-mesenchymal transition.

Epithelial-mesenchymal transition is associated with migration, invasion, and metastasis. The translation at the tissue scale of these changes has not yet been enlightened while being essential in the understanding of tumor progression. Thus, biophysical tools dedicated to measurements on model tumor systems are needed to reveal the impact of epithelial-mesenchymal transition at the collective cell scale. Herein, using an original biophysical approach based on magnetic nanoparticle insertion inside cells, we formed and flattened multicellular aggregates to explore the consequences of the loss of the metastasis suppressor NME1 on the mechanical properties at the tissue scale. Multicellular spheroids behave as viscoelastic fluids, and their equilibrium shape is driven by surface tension as measured by their deformation upon magnetic field application. In a model of breast tumor cells genetically modified for NME1, we correlated tumor invasion, migration, and adhesion modifications with shape maintenance properties by measuring surface tension and exploring both invasive and migratory potential as well as adhesion characteristics.

The emergence of spontaneous coordinated epithelial rotation on cylindrical curved surfaces.

Three-dimensional collective epithelial rotation around a given axis represents a coordinated cellular movement driving tissue morphogenesis and transformation. Questions regarding these behaviors and their relationship with substrate curvatures are intimately linked to spontaneous active matter processes and to vital morphogenetic and embryonic processes. Here, using interdisciplinary approaches, we study the dynamics of epithelial layers lining different cylindrical surfaces. We observe large-scale, persistent, and circumferential rotation in both concavely and convexly curved cylindrical tissues. While epithelia of inverse curvature show an orthogonal switch in actomyosin network orientation and opposite apicobasal polarities, their rotational movements emerge and vary similarly within a common curvature window. We further reveal that this persisting rotation requires stable cell-cell adhesion and Rac-1-dependent cell polarity. Using an active polar gel model, we unveil the different relationships of collective cell polarity and actin alignment with curvatures, which lead to coordinated rotational behavior despite the inverted curvature and cytoskeleton order.

Modulation of designer biomimetic matrices for optimized differentiated intestinal epithelial cultures.

The field of intestinal biology is thirstily searching for different culture methods that complement the limitations of organoids, particularly the lack of a differentiated intestinal compartment. While being recognized as an important milestone for basic and translational biological studies, many primary cultures of intestinal epithelium (IE) rely on empirical trials using hydrogels of various stiffness, whose mechanical impact on epithelial organization remains vague until now. Here, we report the development of hydrogel scaffolds with a range of elasticities and their influence on IE expansion, organization, and differentiation. On stiff substrates (>5 kPa), mouse IE cells adopt a flat cell shape and detach in the short-term. In contrast, on soft substrates (80-500 Pa), they sustain for a long-term, pack into high density, develop columnar shape with improved apical-basal polarity and differentiation marker expression, a phenotype reminiscent of features in vivo mouse IE. We then developed a soft gel molding process to produce 3D Matrigel scaffolds of close-to-nature stiffness, which support and maintain a culture of mouse IE into crypt-villus architecture. Thus, the present work is up-to-date informative for the design of biomaterials for ex vivo intestinal models, offering self-renewal in vitro culture that emulates the mouse IE.

DHA-containing phospholipids control membrane fusion and transcellular tunnel dynamics.

Metabolic studies and animal knockout models point to the critical role of polyunsaturated docosahexaenoic acid (22:6, DHA)-containing phospholipids (DHA-PLs) in physiology. Here, we investigated the impact of DHA-PLs on the dynamics of transendothelial cell macroapertures (TEMs) triggered by RhoA inhibition-associated cell spreading. Lipidomic analyses showed that human umbilical vein endothelial cells (HUVECs) subjected to a DHA diet undergo a 6-fold enrichment in DHA-PLs at the plasma membrane (PM) at the expense of monounsaturated oleic acid-containing PLs (OA-PLs). Consequently, DHA-PL enrichment at the PM induces a reduction in cell thickness and shifts cellular membranes towards a permissive mode of membrane fusion for transcellular tunnel initiation. We provide evidence that a global homeostatic control of membrane tension and cell cortex rigidity minimizes overall changes of TEM area through a decrease of TEM size and lifetime. Conversely, low DHA-PL levels at the PM lead to the opening of unstable and wider TEMs. Together, this provides evidence that variations of DHA-PL levels in membranes affect cell biomechanical properties.

Stiffness tomography of eukaryotic intracellular compartments by atomic force microscopy.

Precise localization and biophysical characterization of cellular structures is a key to the understanding of biological processes happening both inside the cell and at the cell surface. Atomic force microscopy is a powerful tool to study the cell surface - topography, elasticity, viscosity, interactions - and also the viscoelastic behavior of the underlying cytoplasm, cytoskeleton or the nucleus. Here, we demonstrate the ability of atomic force microscopy to also map and characterize organelles and microorganisms inside cells, at the nanoscale, by combining stiffness tomography with super-resolution fluorescence and electron microscopy. By using this correlative approach, we could both identify and characterize intracellular compartments. The validation of this approach was performed by monitoring the stiffening effect according to the metabolic status of the mitochondria in living cells in real-time.

Blocking bacterial entry at the adhesion step reveals dynamic recruitment of membrane and cytosolic probes.

BACKGROUND: Bacterial invasion covers two steps: adhesion and entry per se. The cell signalling response is triggered upon pathogen interaction at the cell surface. This response continues when the pathogen is internalised. It is likely that these two steps activate different molecular machineries. So far, it has not been possible to easily follow in physiological conditions these events separately. We thus developed an approach to uncouple adhesion from entry using atomic force microscopy (AFM)-driven force and fluorescence measurements. RESULTS: We report nanometric-scale, high-resolution, functional dynamic measurements of bacterial interaction with the host cell surface using photonic and adhesion force analyses. We describe how to achieve a precise monitoring of iterative cell-bacterium interactions to analyse host cell signalling responses to infection. By applying this method to Yersinia pseudotuberculosis, we first unveil glycosylphosphatidylinositol-anchored protein domains recruitment to the bacterium cell surface binding site and concomitant cytoskeleton rearrangements using super-resolution fluorescence microscopy. Second, we demonstrate the feasibility of monitoring post-translationally modified proteins, for example, via ubiquitylation, during the first step of infection. CONCLUSION: We provide an approach to discriminate between cellular signalling response activated at the plasma membrane during host-pathogen interaction and that is triggered during the internalisation of the pathogen within the cell. SIGNIFICANCE: This approach adds to the technological arsenal to better understand and fight against pathogens and beyond the scope of microbiology to address conceptual issues of cell surface signalling.

Fifteen years of Servitude et Grandeur to the application of a biophysical technique in medicine: The tale of AFMBioMed.

AFMBioMed is the founding name under which international conferences and summer schools are organized around the application of atomic force microscopy in life sciences and nanomedicine. From its inception at the Atomic Energy Commission in Marcoule near 2004 to its creation in 2007 and to its 10th anniversary conference in Krakow, a brief narrative history of its birth and rise will demonstrate how and what such an organization brings to laboratories and the AFM community. With the current planning of the next AFMBioMed conference in Münster in 2019, it will be 15 years of commitment to these events.

Strength of Neisseria meningitidis binding to endothelial cells requires highly-ordered CD147/ß2-adrenoceptor clusters assembled by alpha-actinin-4.

Neisseria meningitidis (meningococcus) is an invasive bacterial pathogen that colonizes human vessels, causing thrombotic lesions and meningitis. Establishment of tight interactions with endothelial cells is crucial for meningococci to resist haemodynamic forces. Two endothelial receptors, CD147 and the ß2-adrenergic receptor (ß2AR), are sequentially engaged by meningococci to adhere and promote signalling events leading to vascular colonization, but their spatiotemporal coordination is unknown. Here we report that CD147 and ß2AR form constitutive hetero-oligomeric complexes. The scaffolding protein α-actinin-4 directly binds to the cytosolic tail of CD147 and governs the assembly of CD147-ß2AR complexes in highly ordered clusters at bacterial adhesion sites. This multimolecular assembly process increases the binding strength of meningococci to endothelial cells under shear stress, and creates molecular platforms for the elongation of membrane protrusions surrounding adherent bacteria. Thus, the specific organization of cellular receptors has major impacts on host-pathogen interaction.

Ezrin enhances line tension along transcellular tunnel edges via NMIIa driven actomyosin cable formation.

Transendothelial cell macroaperture (TEM) tunnels control endothelium barrier function and are triggered by several toxins from pathogenic bacteria that provoke vascular leakage. Cellular dewetting theory predicted that a line tension of uncharacterized origin works at TEM boundaries to limit their widening. Here, by conducting high-resolution microscopy approaches we unveil the presence of an actomyosin cable encircling TEMs. We develop a theoretical cellular dewetting framework to interpret TEM physical parameters that are quantitatively determined by laser ablation experiments. This establishes the critical role of ezrin and non-muscle myosin II (NMII) in the progressive implementation of line tension. Mechanistically, fluorescence-recovery-after-photobleaching experiments point for the upstream role of ezrin in stabilizing actin filaments at the edges of TEMs, thereby favouring their crosslinking by NMIIa. Collectively, our findings ascribe to ezrin and NMIIa a critical function of enhancing line tension at the cell boundary surrounding the TEMs by promoting the formation of an actomyosin ring.

CLAFEM: Correlative light atomic force electron microscopy.

Atomic force microscopy (AFM) is becoming increasingly used in the biology field. It can give highly accurate topography and biomechanical quantitative data, such as adhesion, elasticity, and viscosity, on living samples. Nowadays, correlative light electron microscopy is a must-have tool in the biology field that combines different microscopy techniques to spatially and temporally analyze the structure and function of a single sample. Here, we describe the combination of AFM with superresolution light microscopy and electron microscopy. We named this technique correlative light atomic force electron microscopy (CLAFEM) in which AFM can be used on fixed and living cells in association with superresolution light microscopy and further processed for transmission or scanning electron microscopy. We herein illustrate this approach to observe cellular bacterial infection and cytoskeleton. We show that CLAFEM brings complementary information at the cellular level, from on the one hand protein distribution and topography at the nanometer scale and on the other hand elasticity at the piconewton scales to fine ultrastructural details.

Adhesiveness of opportunistic Staphylococcus aureus to materials used in dental office: In vitro study.

Staphylococcus aureus (S. aureus) is one of several opportunistic microbial pathogens associated with many healthcare problems. In the present study, S. aureus was assessed for its biofilm-forming ability on materials routinely used in dental offices, including stainless steel (SS), polyethylene (PE), and polyvinyl chloride (PVC). Materials that were tested were characterized for roughness (Ra) and surface free energy (SFE). The adhesion forces exerted by S. aureus to each substratum were investigated using atomic force microscopy (AFM), and biofilm formation was quantitatively assessed by crystal violet staining assay. AFM measurements demonstrated that the strongest adhesion forces (20 nN) were exerted on the PE surfaces (P < 0.05) and depended more on Ra. In addition, the results of biofilm formation capability indicated that S. aureus exhibited more affinity to SS materials when compared to the other materials (P < 0.05). This ability of biofilm formation seems to be more correlated to SFE (R = 0.65). Hence, control of the surface properties of materials used in dental practices is of crucial importance for preventing biofilm formation on dental materials to be used for patients' dental care.

High potential of adhesion to biotic and abiotic surfaces by opportunistic Staphylococcus aureus strains isolated from orthodontic appliances.

Orthodontic and other oral appliances act as reservoir of opportunistic pathogens that can easily become resistant to antibiotics and cause systemic infections. The aim of this study was to investigate the ability of Staphylococcus aureus strains isolated from healthy patients with orthodontic appliances, to adhere to biotic (HeLa cells) and abiotic surfaces (polystyrene and dental alloy). Adhesive ability to polystyrene was tested by crystal violet staining and quantitative biofilm production on dental alloy surfaces was evaluated by MTT reduction assay. In addition, the presence of icaA and icaD genes was achieved by polymerase chain reaction (PCR). Qualitative biofilm production revealed that 70.6% of strains were slime producers. The metabolic activity of S. aureus biofilms on dental alloy surfaces was high and did not differ between tested strains. Moreover, all the isolates were adhesive to HeLa cells and 94% of them harbor icaA and icaD genes. Considerable adhesion and internalization capacity to the epithelial HeLa cells and strong biofilm production abilities together, with a high genotypic expression of icaA/icaD genes are an important equipment of S. aureus to colonize orthodontic appliances and eventually to disseminate towards other body areas.

Interplay between troponin T phosphorylation and O-N-acetylglucosaminylation in ischaemic heart failure.

AIMS: Previous studies have reported that decreased serine 208 phosphorylation of troponin T (TnTpSer208) is associated with ischaemic heart failure (HF), but the molecular mechanisms and functional consequences of these changes are unknown. The aim of this study was to characterize the balance between serine phosphorylation and O-N-acetylglucosaminylation (O-GlcNAcylation) of TnT in HF, its mechanisms, and the consequences of modulating these post-translational modifications. METHODS AND RESULTS: Decreased TnTpSer208 levels in the left ventricles of HF male Wistar rats were associated with reduced expression of PKCε but not of other cardiac PKC isoforms. In both isolated perfused rat hearts and cultured neonatal cardiomyocytes, the PKCε inhibitor εV1-2 decreased TnTpSer208 and simultaneously decreased cardiac contraction in isolated hearts and beating amplitude in neonatal cardiomyocytes (measured by atomic force microscopy). Down-regulating PKCε by silencing RNA (siRNA) also reduced TnTpSer208 in these cardiomyocytes, and PKCε-/- mice had lower TnTpSer208 levels than the wild-type. In parallel, HF increased TnT O-GlcNAcylation via both increased O-GlcNAc transferase and decreased O-GlcNAcase activity. Increasing O-GlcNAcylation (via O-GlcNAcase inhibition with Thiamet G) decreased TnTpSer208 in isolated hearts, while reducing O-GlcNAcylation (O-GlcNAc transferase siRNA) increased TnTpSer208 in neonatal cardiomyocytes. Mass spectrometry and NMR analysis identified O-GlcNAcylation of TnT on Ser190. CONCLUSION: These data demonstrate interplay between Ser208 phosphorylation and Ser190 O-GlcNAcylation of TnT in ischaemic HF, linked to decreased activity of both PKCε and O-GlcNAcase and increased O-GlcNAc transferase activity. Modulation of these post-translational modifications of TnT may be a new therapeutic strategy in HF.

Pathogenic Neisseria meningitidis utilizes CD147 for vascular colonization.

Neisseria meningitidis is a cause of meningitis epidemics worldwide and of rapidly progressing fatal septic shock. A crucial step in the pathogenesis of invasive meningococcal infections is the adhesion of bloodborne meningococci to both peripheral and brain endothelia, leading to major vascular dysfunction. Initial adhesion of pathogenic strains to endothelial cells relies on meningococcal type IV pili, but the endothelial receptor for bacterial adhesion remains unknown. Here, we report that the immunoglobulin superfamily member CD147 (also called extracellular matrix metalloproteinase inducer (EMMPRIN) or Basigin) is a critical host receptor for the meningococcal pilus components PilE and PilV. Interfering with this interaction potently inhibited the primary attachment of meningococci to human endothelial cells in vitro and prevented colonization of vessels in human brain tissue explants ex vivo and in humanized mice in vivo. These findings establish the molecular events by which meningococci target human endothelia, and they open new perspectives for treatment and prevention of meningococcus-induced vascular dysfunctions.