Application of antimicrobial chitosan-Furcellaran-hydrolysate gelatin edible coatings enriched with bioactive peptides in shelf-life extension of pork loin stored at 4 and -20 °C.

In this study, the authors investigate the preservative capabilities of edible coatings comprising a blend of chitosan, furcellaran and gelatin hydrolysate enhanced with the bioactive peptides RW4 and LL37. The preservative effects on pork samples stored for 21 days at 4 °C and 6 months at -20 °C were studied, while examining changes in microbiological contamination, pH levels, water activity and sensory attributes. Microbiological analyses reveal the coatings' antimicrobial efficacy against aerobic bacteria, microscopic fungi and yeasts, particularly during the initial storage period, when coated samples exhibit microbial reductions of 0.5-2 log CFU/g compared to the controls. The coatings have no discernible impact on water activity during storage in refrigerated or freezer conditions. Notably, differences in pH development can be observed between the coated and control samples, potentially attributable to the antimicrobial action of the coatings. Sensory analysis allows to highlight the inhibition of deterioration related to sensory attributes through the use of edible coatings. In conclusion, employing bioactive peptide-enriched edible coatings holds promise for extending the shelf-life of perishable foods.

The Preparation of Silver and Gold Nanoparticles in Hyaluronic Acid and the Influence of Low-Pressure Plasma Treatment on Their Physicochemical and Microbiological Properties.

Nanometals constitute a rapidly growing area of research within nanotechnology. Nanosilver and nanogold exhibit significant antimicrobial, antifungal, antiviral, anti-inflammatory, anti-angiogenic, and anticancer properties. The size and shape of nanoparticles are critical for determining their antimicrobial activity. In this study, silver and gold nanoparticles were synthesized within a hyaluronic acid matrix utilizing distilled water and distilled water treated with low-pressure, low-temperature glow plasma in an environment of air and argon. Electron microscopy, UV-Vis and FTIR spectra, water, and mechanical measurements were conducted to investigate the properties of nanometallic composites. This study also examined their microbiological properties. This study demonstrated that the properties of the composites differed depending on the preparation conditions, encompassing physicochemical and microbiological properties. The application of plasma-treated water under both air and argon had a significant effect on the size and distribution of nanometals. Silver nanoparticles were obtained between the range of 5 to 25 nm, while gold nanoparticles varied between 10 to 35 nm. The results indicate that the conditions under which silver and gold nanoparticles are produced have a significant effect on their mechanical and antibacterial properties.

Preparation and Characterisation of Acid-Base-Change-Sensitive Binary Biopolymer Films with Olive Oil and Ozonated Olive Oil Nano/Microcapsules and Added Hibiscus Extract.

The purpose of this study was to develop and characterise bionanocomposites based on chitosan (CHIT) and alginate (ALG) in two series, which were subsequently functionalised with emulsions based on a combination of water, oil, ozonated oil and hibiscus flower extracts. The structure and morphology of the materials produced were characterised by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and ultraviolet and visible light (UV-Vis) absorption spectroscopy, along with a surface colour analysis and the determination of the mechanical and thermal properties of the resulting composites. Functionalisation did affect the analysed composite parameters. The FTIR spectra indicated that the polysaccharide matrix components were compatible. The SEM images also confirmed the presence of nano/microcapsules in the polysaccharide matrix. The obtained results indicate that the order of adding polysaccharides has a significant impact on the encapsulation capacity. The encapsulation resulted in the improved thermal stability of the composites. The emissions analysis showed that the composites containing nano/microcapsules are characterised by a higher emission intensity and are sensitive to acid or base changes. Significant differences in emission intensity were observed even at low concentrations of acids and bases. A drop in the mechanical properties was observed following functionalisation. The results of this study suggest that these bionanocomposites can be used as active and/or smart packaging materials.

The influence of aqueous butterfly pea (Clitoria ternatea) flower extract on active and intelligent properties of furcellaran Double-Layered films - in vitro and in vivo research.

Innovative, intelligent and active double-layer films, based on furcellaran and with the addition of gelatin hydrolysates, have been obtained for the first time. An aqueous extract of clitoria flower in 3 concentrations was included in the 1st FUR layer. The films demonstrated strong antimicrobial effects, but did not exhibit fungicidal properties. The antioxidant properties of the films were within the range of 2.27-3.92 mM Trolox/mg (FRAP method) and 36.67-61.24 % (DPPH method). The films were used as active packaging materials in salmon fillets, which were stored for a period of 12 days in 4 °C. Analysis concerning microbiological properties of the stored fillets showed the possibility of extending their shelf-life by 6 days. Lipid oxidation, determined by TBARS has delayed. The obtained films are a promising material for the packaging industry. This is an important aspect within the context of global food waste and also the need to reduce synthetic materials.

Comparison of Physicochemical Properties of Silver and Gold Nanocomposites Based on Potato Starch in Distilled and Cold Plasma-Treated Water.

Nanometal-containing biocomposites find wide use in many industries and fields of science. The physicochemical properties of these materials depend on the character of the polymer, the size and shape of the metallic nanoparticles, and the interactions between the biopolymer and the nanoparticles. The aim of the work was to synthesise and study the effect of plasma-treated water on the properties of the obtained metallic nanoparticles as well as the physicochemical and functional properties of nanocomposites based on potato starch. The metallic nanoparticles were synthesised within a starch paste made in distilled water and in distilled water exposed to low-temperature, low-pressure plasma. The materials produced were characterised in terms of their physicochemical properties. Studies have shown that gold and silver nanoparticles were successfully obtained in a matrix of potato starch in distilled water and plasma water. SEM (Scanning Electron Microscopy) images and UV-Vis spectra confirmed the presence of nanosilver and nanosilver in the obtained composites. On the basis of microscopic images, the size of nanoparticles was estimated in the range from 5 to 20 nm for nanoAg and from 15 to 40 nm for nanoAu. The analysis of FTIR-ATR spectra showed that the type of water used and the synthesis of gold and silver nanoparticles did not lead to changes in the chemical structure of potato starch. DLS analysis showed that the nanoAg obtained in the plasma water-based starch matrix were smaller than the Ag particles obtained using distilled water. Colour analysis showed that the nanocomposites without nanometals were colourless, while those containing nanoAg were yellow, while those with nanoAu were dark purple. This work shows the possibility of using plasma water in the synthesis of nanometals using potato starch, which is a very promising polysaccharide in terms of many potential applications.

Double-Layered Films Based on Furcellaran, Chitosan, and Gelatin Hydrolysates Enriched with AgNPs in Yerba Mate Extract, Montmorillonite, and Curcumin with Rosemary Essential Oil.

Double-layered active films based on furcellaran (1st layer-FUR), chitosan, and gelatin hydrolysates (2nd layer-CHIT+HGEL) were successfully prepared. Bioactive ingredients were added to the 1st film layer: AgNPs, which were synthesized in situ with yerba mate extract; montmorillonite clay (MMT); and different loads of ethanolic curcumin (CUR) extract enriched with rosemary essential oil (REO). SEM images confirmed the presence of AgNPs with a size distribution of 94.96 ± 3.33 nm throughout the films, and AFM and SEM photos indicated that the higher substance concentrations had rougher and more porous film microstructures. However, the water vapor transmission rate was reduced only at the lowest load of this ingredient. Despite the tensile strength of the films having decreased, the incorporation of the compounds showed a tendency towards reducing the modulus of elasticity, resulting in a lower stiffness of the composites. The addition of CUR and AgNPs improved the UV light barrier properties of the materials. The presented films showed quick reactions to changes in the pH value (from orange to red along with an increase in pH from 2 to 10), which indicates their potential use as indicators for monitoring the freshness of food products. Composite No. 2 showed the highest antimicrobial potential, while none of the presented films showed an antifungal effect. Finally, the antioxidant activities of the films increased dramatically at higher AgNP and CUR loads, suggesting an outstanding potential for active food packaging applications.

Utilisation of Carp Skin Post-Production Waste in Binary Films Based on Furcellaran and Chitosan to Obtain Packaging Materials for Storing Blueberries.

The aim of the study was to develop and characterise an innovative three-component biopolymer film based on chitosan (CHIT), furcellaran (FUR) and a gelatin hydrolysate from carp skins (Cyprinus carpio) (HGEL). The structure and morphology were characterised using the Fourier transform infrared spectroscopy (FT-IR) and atomic force microscopy (AFM). The FT-IR test showed no changes in the matrix after the addition of HGEL, which indicates that the film components were compatible. Based on the obtained AFM results, it was found that the addition of HGEL caused the formation of grooves and cracks on the surface of the film (reduction by ~21%). The addition of HGEL improved the antioxidant activity of the film (improvement by up to 2.318% and 444% of DPPH and FRAP power, respectively). Due to their properties, the tested films were used as active materials in the preservation of American blueberries. In the active films, the blueberries lost mass quickly compared to the synthetic film and were characterised by higher phenol content. The results obtained in this study create the opportunity to use the designed CHIT-FUR films in developing biodegradable packaging materials for food protection, but it is necessary to test their effectiveness on other food products.

Composite biopolymer films based on a polyelectrolyte complex of furcellaran and chitosan.

The aim of research was to develop biopolymer films based on natural polysaccharides. For the first time, biodegradable films were obtained on the basis of a furcellaran-chitosan polyelectrolyte complex. The conditions for its formation were determined by measuring the zeta potential as a function of colloid pH, the size of pure components and their mixtures. The structure and morphology of the prepared films were characterised by FT-IR and AFM analysis. The lowest WVTR values were observed for the FUR and the CHIT-FUR films at the ratio of 9:1. The mechanical, water and rheological properties depend on the weight ratio of furcellaran to chitosan in the mixture. The thermal stability has been improved in CHIT-FUR films at the 9:1 ratio. The results obtained create the possibility of successfully using CHIT-FUR films in the development of biodegradable packaging materials.

[Candidiasis in the experimental model of ulcerative colitis]. / Kandydiaza w doswiadczalnym modelu zapalenia jelita grubego.

In the present study on animal model of ulcerative colitis the influence of fungal colonization on the severity of inflammatory lesions in the colon and the course of their healing was evaluated. The results of our studies revealed, that significant fungal colonization (over 10(4) CFU/ml) delayed ulcer healing in the colon. It corresponded with the decrease of colonic blood flow (CBF) in the region of lesions and increase of interleukin (IL)-1beta, tumor necrosis factor(TNF)-alpha level in the serum. Introduction of antifungal therapy (fluconazole) or probiotic in rats inoculated with Candida accelerated the process of ulcer healing in the colon, expressed through the reduction of macro- and microscopic lesions in the colon and decrease of MPO, IL-beta TNF-alpha serum level.