Explaining how childhood physical abuse and physical neglect influence adult depression: An analysis with multiple sequential mediators.

BACKGROUND: Substantial evidence indicates that experiencing physical abuse and neglect during childhood significantly elevates the likelihood of developing depression in adulthood. Nevertheless, there remains a dearth of understanding regarding the mechanisms underpinning this correlation. OBJECTIVE: In this study, we aimed to examine the associations of childhood physical abuse and physical neglect with depression using follow-up data from UK Biobank and quantified the contribution of smoking, insomnia, and BMI in these associations. PARTICIPANTS AND SETTINGS: This study included 144,704 participants (64,168 men and 80,536 women) from UK Biobank, most of whom were white (97 %). METHODS: Physical abuse and physical neglect were measured using two items of Childhood Trauma Screener (CTS). Data on the incidence of depression were obtained from primary care, hospital inpatient records, self-reported medical conditions, and death registries. We used a sequential mediation analysis based on the "g-formula" approach to explore the individual and joint effects of potential mediators. RESULTS: The depression incidence rate was 1.85 per 1000 person-years for men and 2.83 per 1000 person-years for women, respectively. Results of Cox proportional risk regression showed that physical abuse (HRs: 1.39-1.53, P < 0.001) and physical neglect (HRs: 1.43-1.60, P < 0.001) are associated with depression. Smoking, insomnia, and BMI together mediated 3 %-26 % of the associations. CONCLUSIONS: These findings contribute to our understanding of how physical abuse and physical neglect influence depression. Furthermore, a more effective reduction in the burden of depression can be achieved by managing modifiable mediators.

Internalizing and externalizing problems mediate the relationship between maltreatment and self-harm among UK adolescents.

BACKGROUND: Maltreatment is a significant predictive factor for self-harm in adolescents. Internalizing and externalizing problems are both common psychopathological issues in adolescents. This study aimed to look into the link between maltreatment and self-harm in a large sample of adolescents in the UK, as well as the mediating effects that internalizing and externalizing problems play in this link. METHODS: Data were pulled from the UK Millennium Cohort Study, and a total of 8894 adolescents were included in this analysis. All variables were assessed by Questionnaires. Path analysis was performed to assess the mediating effects of internalizing and externalizing problems in the link between maltreatment and self-harm. RESULTS: 23.4 % of samples reported self-harm incidents during the preceding 12 months. Emotional abuse and physical abuse were significantly related to self-harm, and adolescents who had experienced multiple forms of maltreatment were more prone to self-harm. Mediation analysis revealed that internalizing problems were the primary mediator in the link between emotional abuse and self-harm, with the mediation effect size being 0.29. Internalizing and externalizing problems performed similarly in the link between physical abuse and self-harm, with mediation effect sizes of 0.23 and 0.19, respectively. LIMITATIONS: The majority of the data was gathered through self-reporting. CONCLUSIONS: Emotional abuse and physical abuse were significant predictors of self-harm, and their links with self-harm were partially mediated via internalizing and externalizing problems. Better supervision of maltreatment, and timely intervention for both internalizing and externalizing problems, are critical in preventing self-harm among adolescents.

Micromechanism in All-Solid-State Alloy-Metal Batteries: Regulating Homogeneous Lithium Precipitation and Flexible Solid Electrolyte Interphase Evolution.

Sulfide-based solid-state electrolytes (SSEs) matched with alloy anodes are considered as promising candidates for application in all-solid-state batteries (ASSBs) to overcome the bottlenecks of the lithium (Li) anode. However, an understanding of the dynamic electrochemical processes on alloy anode in SSE is still elusive. Herein, in situ atomic force microscopy gives insights into the block-formation and stack-accumulation behaviors of Li precipitation on an Li electrode, uncovering the morphological evolution of nanoscale Li deposition/dissolution in ASSBs. Furthermore, two-dimensional Li-indium (In) alloy lamellae and the homogeneous solid electrolyte interphase (SEI) shell on the In electrode reveal the precipitation mechanism microscopically regulated by the alloy anode. The flexible and wrinkle-structure SEI shell further enables the electrode protection and inner Li accommodation upon cycles, elucidating the functional influences of SEI shell on the cycling behaviors. Such on-site tracking of the morphological evolution and dynamic mechanism provide an in-depth understanding and thus benefit the optimizations of alloy-based ASSBs.

Dynamic Evolution of a Cathode Interphase Layer at the Surface of LiNi0.5Co0.2Mn0.3O2 in Quasi-Solid-State Lithium Batteries.

Intensive understanding of the surface mechanism of cathode materials, such as structural evolution and chemical and mechanical stability upon charging/discharging, is crucial to design advanced solid-state lithium batteries (SSLBs) of tomorrow. Here, via in situ atomic force microscopy monitoring, we explore the dynamic evolution process at the surface of LiNi0.5Co0.2Mn0.3O2 cathode particles inside a working SSLB. The dynamic formation process of the cathode interphase layer, with an inorganic-organic hybrid structure, was real-time imaged, as well as the evolution of its mechanical property by in situ scanning of the Derjaguin-Muller-Toporov modulus. Moreover, different components of the cathode interphase layer, such as LiF, Li2CO3, and specific organic species, were identified in detailat different stages of cycling, which can be directly correlated with the impedance buildup of the battery. In addition, the transition metal migration and the formation of new phases can further exacerbate the degradation of the SSLB. A relatively stable cathode interphase is key to improving the performance of SSLBs. Our findings provide deep insights into the dynamic evolution of surface morphology, chemical components and mechanical properties of the cathode interphase layer, which are pivotal for the performance optimization of SSLBs.

Effects of quercetin on pharmacokinetics of cefprozil in Chinese-Han male volunteers.

1. The primary objective of this study was to evaluate the effects of quercetin on the pharmacokinetics of cefprozil. The secondary objective was to evaluate the safety of the combined use of cefprozil and quercetin. 2. An open-label, two-period, crossover phase I trial among 24 Han Chinese male subjects was conducted. Participants were given 500 mg of quercetin orally once daily for 15 d followed by single dose of cefprozil (500 mg) on day 15. Serum concentrations of cefprozil were then measured in all participants on day 15. A 15-d washout period was then assigned after which a 500 mg dose of cefprozil was administered and measured in the serum on day 36. 3. All subjects completed the trial, and no serious adverse events were reported. We measured mean serum concentrations of cefprozil in the presence and absence of quercetin in all participants. The maximum serum concentration of cefprozil in the presence of quercetin was 8.18 ug/ml (95% CI: 7.55-8.81) versus a maximum cefprozil concentration of 8.35 ug/ml (95% CI: 7.51-9.19) in the absence of quercetin. We conclude that the concurrent use of quercetin has no substantial effect on serum concentrations of orally administered cefprozil. 4. Co-administration of quercetin showed no statistically significant effects on the pharmacokinetics of cefprozil in healthy Chinese subjects.

Virus-induced gene silencing of PEAM4 affects floral morphology by altering the expression pattern of PsSOC1a and PsPVP in pea.

pea-MADS4 (PEAM4) regulates floral morphology in Pisum sativum L., however, its molecular mechanisms still remain unclear. Virus-induced gene silencing (VIGS) is a recently developed reverse genetic approach that facilities an easier and more rapid study of gene functions. In this study, the PEAM4 gene was effectively silenced by VIGS using a pea early browning virus (PEBV) in wild type pea JI992. The infected plants showed abnormal phenotypes, as the floral organs, especially the sepals and petals changed in both size and shape, which made the corolla less closed. The petals changed in morphology and internal symmetry with, the stamens reduced and carpel dehisced. Larger sepals and longer tendrils with small cauline leaves appeared, with some sepals turning into bracts, and secondary inflorescences with fused floral organs were formed, indicating a flower-to-inflorescence change. The infected plants also displayed a delayed and prolonged flowering time. The PEAM4-VIGS plants with altered floral morphology were similar to the pim (proliferating inflorescence meristem) mutant and also mimicked the phenotypes of ap1 mutants in Arabidopsis. The expression pattern of the homologous genes PsSOC1a and PsSVP, which were involved in flowering time and florescence morphological control downstream of PEAM4, were analyzed by real-time RT-PCR and mRNA in situ hybridization. PsSOC1a and PsSVP were ectopically expressed and enhanced in the floral meristems from PEAM4-silenced plants. Our data suggests that PEAM4 may have a similar molecular mechanism as AtAP1, which inhibits the expression of PsSOC1a and PsSVP in the floral meristem from the early stages of flower development. As such, in this way PEAM4 plays a crucial role in maintaining floral organ identity and flower development in pea.

Perovskite LaTiO3-Ag0.2 nanomaterials for nonenzymatic glucose sensor with high performance.

In this paper, a nonenzymatic glucose biosensor based on perovskite LaTiO3-Ag0.2(LTA) modified electrode was presented. The morphology and the composition of the perovskite LaTiO3-Ag0.2 nanomaterials were characterized by using scanning electron microscopy (SEM) and X-ray diffraction (XRD) respectively. The LaTiO3-Ag0.2(LTA) composite was investigated by electrochemical characterization using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under optimal conditions, CV and chronoamperometry (I-t) study revealed that, compared with the bare glassy carbon electrode (GCE), the modified electrode showed a remarkable increase in the efficiency of the electrocatalytic oxidation of glucose, starting at around +0.70 V (vs. Ag/AgCl). The prepared sensor exhibited a high sensitivity of 784.14 µAmM⁻¹ cm⁻², a low detection limit of 2.1×10⁻7 M and a wide linear range from 2.5 µM to 4 mM (R=0.9997). More importantly, the LTA modified electrode was also relatively insensitive to commonly interfering species such as ascorbic acid (AA), uric acid (UA), dopamine (DA) in high potential. Moreover, the nonenzymatic sensor was applied to the determination of glucose in human serum samples and the results were in good agreement with clinical data. Electrodes modified with perovskite nanomaterials are highly promising for nonenzymatic electrochemical detection of glucose because of their high sensitivity, fast response, excellent stability and good reproducibility.