Macrophage Extracellular Traps Suppress Particulate Matter-Induced Airway Inflammation.

Accumulating evidence has substantiated the potential of ambient particulate matter (PM) to elicit detrimental health consequences in the respiratory system, notably airway inflammation. Macrophages, a pivotal component of the innate immune system, assume a crucial function in responding to exogenous agents. However, the roles and detailed mechanisms in regulating PM-induced airway inflammation remain unclear. Our study revealed that PM had the ability to stimulate the formation of macrophage extracellular traps (METs) both in vitro and in vivo. This effect was found to be dependent on peptidylarginine deiminase type 4 (PAD4)-mediated histone citrullination. Additionally, reactive oxygen species were also found to be involved in the formation of PM-induced METs, in parallel with PAD4. Genetic deletion of PAD4 in macrophages resulted in an up-regulation of inflammatory cytokine expression. Moreover, mice with PAD4-specific knockout in myeloid cells exhibited exacerbated PM-induced airway inflammation. Mechanistically, inhibition of METs suppressed the phagocytic ability in macrophages, leading to airway epithelial injuries and an aggravated PM-induced airway inflammation. The present study demonstrates that METs play a crucial role in promoting the phagocytosis and clearance of PM by macrophages, thereby suppressing airway inflammation. Furthermore, it suggests that activation of METs may represent a novel therapeutic strategy for PM-related airway disorders.

Facile synthesis of a carbon supported lithium iron phosphate nanocomposite cathode material from metal-organic framework for lithium-ion batteries.

Lithium iron phosphate (LiFePO4, LFP) has become one of the most widely used cathode materials for lithium-ion batteries. The inferior lithium-ion diffusion rate of LFP crystals always incurs poor rate capability and unsatisfactory low-temperature performances. To meet with the requirements from the ever-growing market, it is of great significance to synthesize carbon supported LFP nanocomposite (LFP/C) cathode materials using cost effective and environmentally friendly methods. In this work, an LFP/C cathode material is straightforwardly prepared from a metal-organic framework (MOF) precursor ferric gallate (Fe-GA) using its self-template effect. The Fe-GA precursor is firstly fabricated from the redox coprecipitation reaction between Fe foils and gallic acid (GA) molecules in mild aqueous phase. Then the Fe-GA is directly converted to the LFP/C sample after a following solid-state reaction. In half-cells, the LFP/C composite exhibits a reversible capacity of 109.7 mAh·g-1 after 500 cycles under the current rate of 100 mA·g-1 at 25 °C as well as good rate capabilities. In the LFP/C//graphite full-cells, the LFP/C composite can deliver a reversible capacity of 71.4 mAh·g-1 after 50 cycles in the same condition as the half-cells. The electrochemical performances of the LFP/C cathode in half-cells at lower temperature of -10 °C are also examined. Particularly, the evolution of samples has been explored and the lithium-ion storage mechanism of the LFP/C cathode has been unveiled. The sample synthesis protocol is straightforward, eco-friendly and atomic efficient, which can be considered to have good potential for scaling-up.

Triphenylamine-Based Polythioacetal for Selective Sensing of Mercury(II) with High Specificity and Sensitivity.

Utilizing the mercury (Hg2+)-triggered deprotection of thioacetals to aldehyde groups, we constructed a water-soluble triphenylamine (TPA)-based polythioacetal PTA-TPA with thioacetal groups in the backbones for efficient sensing of Hg2+ in aqueous solutions. PTA-TPA is conveniently prepared by polycondensation of 3, 6-dioxa-1,8-octanedithiol (DODT) with 4-(N,N-diphenylamino) benzaldehyde (TPA-CHO) using thiol-terminated mPEG2k-SH as a capping agent. The interaction of Hg2+ with PTA-TPA activates the aggregation-induced emission (AIE) process of TPA-CHO molecules, which makes the emission enhanced, and the emission color changes to sky blue, while other metal ions do not interfere with the sensing process. PTA-TPA can be used as a highly selective and ultrafast detection system for Hg2+ with a low detection limit (LOD) of 9.88 nM and a fast response of less than 1 min. In addition, the prepared test strips report the presence of Hg2+ with an LOD as low as 1 × 10-5 M. Intracellular imaging applications have demonstrated that PTA-TPA acts as a biocompatible fluorescent probe for efficient Hg2+ sensing in HeLa cells. Overall, the PTA-TPA fluorescence probes have the characteristics of easy synthesis, cost-effective, ultrafast detection speed, high selectivity, and high sensitivity, which can be used in practical applications.

Consecutive engineering of anodic graphene supported cobalt monoxide composite and cathodic nanosized lithium cobalt oxide materials with improved lithium-ion storage performances.

Downsizing the electrochemically active materials in both cathodic and anodic electrodes commonly brings about enhanced lithium-ion storage performances. It is particularly meaningful to explore simplified and effective strategies for exploiting nanosized electrode materials in the advanced lithium-ion batteries. In this work, the spontaneous reaction between few-layered graphene oxide (GO) and metallic cobalt (Co) foils in mild hydrothermal condition is for the first time employed to synthesize a reduced graphene oxide (RGO) supported nanosized cobalt monoxide (CoO) anode material (CoO@RGO). Furthermore, the CoO@RGO sample is converted to nanosized lithium cobalt oxide cathode material (LiCoO2, LCO) by taking the advantages of the self-templated effect. As a result, both the CoO@RGO anode and the LCO cathode exhibit inspiring lithium-ion storage properties. In half-cells, the CoO@RGO sample maintains a reversible capacity of 740.6 mAh·g-1 after 300 cycles at the current density of 1000 mA·g-1 while the LCO sample delivers a reversible capacity of 109.1 mAh·g-1 after 100 cycles at the current density of 100 mA·g-1. In the CoO@RGO//LCO full-cells, the CoO@RGO sample delivers a reversible capacity of 553.9 mAh·g-1 after 50 cycles at the current density of 200 mA·g-1. The reasons for superior electrochemical behaviors of the samples have been revealed, and the strategy in this work can be considered to be straightforward and effective for engineering both anode and cathode materials for lithium-ion batteries.

Engineering a hierarchical reduced graphene oxide and lignosulfonate derived carbon framework supported tin dioxide nanocomposite for lithium-ion storage.

Tin dioxide (SnO2) is widely recognized as a high-performance anode material for lithium-ion batteries. To simultaneously achieve satisfactory electrochemical performances and lower manufacturing costs, engineering nano-sized SnO2 and further immobilizing SnO2 with supportive carbon frameworks via eco-friendly and cost-effective approaches are challenging tasks. In this work, biomass sodium lignosulfonate (LS-Na), stannous chloride (SnCl2) and a small amount of few-layered graphene oxide (GO) are employed as raw materials to engineer a hierarchical carbon framework supported SnO2 nanocomposite. The spontaneous chelation reaction between LS-Na and SnCl2 under mild hydrothermal condition generates the corresponding SnCl2@LS sample with a uniform distribution of Sn2+ in the LS domains, and the SnCl2@LS sample is further dispersed by GO sheets via a redox coprecipitation reaction. After a thermal treatment, the SnCl2@LS@GO sample is converted to the final SnO2/LSC/RGO sample with an improved microstructure. The SnO2/LSC/RGO nanocomposite exhibits excellent lithium-ion storage performances with a high specific capacity of 938.3 mAh/g after 600 cycles at 1000 mA g-1 in half-cells and 517.1 mAh/g after 50 cycles at 200 mA g-1 in full-cells. This work provides a potential strategy of engineering biomass derived high-performance electrode materials for rechargeable batteries.

Preparation and characterization of diacylglycerol via ultrasound-assisted enzyme-catalyzed transesterification of lard with glycerol monolaurate.

The study aimed to evaluate the effect of ultrasonic pretreatment on the transesterification of lard with glycerol monolaurate (GML) using Lipozyme TL IM to synthesize diacylglycerol (DAG), and the physicochemical properties of lard, GML, ultrasonic-treated diacylglycerol (named U-DAG), purified ultrasonic-treated diacylglycerol obtained by molecular distillation (named P-U-DAG), and without ultrasonic-treated diacylglycerol (named N-U-DAG) were analyzed. The optimized ultrasonic pretreatment conditions were: lard to GML mole ratio 3:1, enzyme dosage 6 %, ultrasonic temperature 80 °C, time 9 min, power 315 W. After ultrasonic pretreatment, the mixtures reacted for 4 h in a water bath at 60 °C, the content of DAG reached 40.59 %. No significant variations were observed between U-DAG and N-U-DAG in fatty acids compositions and iodine value, while P-U-DAG had lower unsaturated fatty acids than U-DAG. Differential scanning calorimetry analysis showed that the melting and crystallization properties of DAGs prepared by ultrasonic pretreatment significantly differed from lard. FTIR spectra noted transesterification reaction from lard and GML with and without ultrasonic pretreatment would not change the structure of lard. However, thermogravimetric analysis proved that N-U-DAG, U-DAG, and P-U-DAG had lower oxidation stability than lard. The higher the content of DAG, the faster the oxidation speed.

Engineering a hierarchical carbon supported magnetite nanoparticles composite from metal organic framework and graphene oxide for lithium-ion storage.

Fe based metal organic framework (MOF) materials are being extensively investigated as a precursor sample for engineering carbon supported iron containing nanoparticles composites. Rational design and engineering Fe-containing MOFs with optimized structures using economic and eco-friendly methods is a challenging task. In this work, 1,3,5-benzenetricarboxylic acid (C9H6O6, trimesic acid, H3BTC) and metal Fe are employed to synthesize a MOF sample Fe-BTC in a mild hydrothermal condition. Moreover, with the addition of a small quantity of graphene oxide (GO) as dispersant, a redox coprecipitation reaction has taken place where small Fe-BTC domains well dispersed by reduced graphene oxide (RGO). The Fe-BTC/RGO intermediate sample is finally converted to the hierarchical Fe3O4@C/RGO composite, which delivers an ultrahigh specific capacity of 1262.61 mAh·g-1 at 200 mA·g-1 after 150 cycles and a superior reversible capacity of 910.65 mAh·g-1 at 1000 mA·g-1 after 300 cycles in half cells. The full cell performance for the Fe3O4@C/RGO composite have been studied. It is also revealed that the improved structural stability, high pseudocapacitive contribution and enhanced lithium-ion and electron transportation conditions jointly guarantee the outstanding lithium-ion storage performances for the Fe3O4@C/RGO composite over long-time cycling. The synthesized samples have good potential for wider application.

Controllable engineering magnetite nanoparticles dispersed in a hierarchical amylose derived carbon and reduced graphene oxide framework for lithium-ion storage.

A straightforward and eco-friendly method is demonstrated to engineer magnetite (Fe3O4) nanoparticles well dispersed by an amorphous amylose-derived carbon (AMC) and reduced graphene oxide (RGO) framework. Naturally available amylose (AM) serves as both reducing agent for few-layered graphene oxide (GO) in the first mild redox coprecipitation system and precursor for small-sized pyrolytic AMC in the following thermal treatment. In particular, the presence of the AM molecules effectively limits the crystal growth kinetics for the akaganeite (FeOOH) in the intermediate FeOOH@AM/RGO sample, which contributes to the transformation to Fe3O4 nanoparticles with significantly controlled size in the final Fe3O4@AMC/RGO composite. As a result, both Fe3O4 nanoparticles and AMC domains are adjacently anchored on the larger sized RGO sheets, and a unique hierarchical structure has been engineered in the Fe3O4@AMC/RGO sample. Compared with the controlled Fe3O4@RGO sample, the Fe3O4@AMC/RGO composite exhibits remarkably enhanced initial coulombic efficiency, superior cycling stability and rate performance for lithium-ion storage. The mechanisms of the interaction between GO sheets and AM molecules as well as the inspiring electrochemical behaviors of the Fe3O4@AMC/RGO electrode have been revealed. The Fe3O4@AMC/RGO sample possesses good potential for scaling-up and finding applications in wider fields.

One-Step Engineering Carbon Supported Magnetite Nanoparticles Composite in a Submicron Pomegranate Configuration for Superior Lithium-Ion Storage.

In this work, magnetite nanoparticles (Fe3O4) that are well dispersed by a submicron sized carbon framework in a pomegranate shape are engineered using a flexible one-step spray pyrolysis strategy. Under inert gas atmosphere, the homogeneously mixed Fe3+ ions and chitosan (CS) molecules are in situ transformed to Fe3O4 nanoparticles and spherical nitrogen-doped carbon coating domains, respectively. Moreover, the obtained Fe3O4@C composite exhibits a unique submicron sized pomegranate configuration, in which favorable electric/ionic pathways have been constructed and the Fe3O4 nanoparticles have been effectively dispersed. When used as an anode electrochemical active material, the Fe3O4@C composite exhibits impressive lithium-ion storage capabilities, and maintains a reversible capacity of 500.2 mAh·g-1 after 500 cycles at a high current density of 1000 mA·g-1 as well as good rate capability. The strategy in this work is straightforward and effective, and the synthesized Fe3O4@C material has good potential in wider applications.

Advances in Multiple Stimuli-Responsive Drug-Delivery Systems for Cancer Therapy.

Nanomedicines afford unique advantages in therapeutic intervention against tumors. However, conventional nanomedicines have failed to achieve the desired effect against cancers because of the presence of complicated physiological fluids and the tumor microenvironment. Stimuli-responsive drug-delivery systems have emerged as potential tools for advanced treatment of cancers. Versatile nano-carriers co-triggered by multiple stimuli in different levels of organisms (eg, extracorporeal, tumor tissue, cell, subcellular organelles) have aroused widespread interest because they can overcome sequential physiological and pathological barriers to deliver diverse therapeutic "payloads" to the desired targets. Furthermore, multiple stimuli-responsive drug-delivery systems (MSR-DDSs) offer a good platform for co-delivery of agents and reversing multidrug resistance. This review affords a comprehensive overview on the "landscape" of MSR-DDSs against tumors, highlights the design strategies of MSR-DDSs in recent years, discusses the putative advantage of oncotherapy or the obstacles that so far have hindered the clinical translation of MSR-DDSs.

Preparation of ROS-responsive core crosslinked polycarbonate micelles with thioketal linkage.

Herein, we prepared novel reactive oxygen species (ROS) responsive core crosslinked (CCL/TK) polycarbonate micelles conveniently by click reaction between amphiphilic diblock copolymer poly(ethylene glycol)-poly(5-methyl-5-propargylxycar-bonyl-1,3-dioxane-2-one) (PEG-PMPC) with pendant alkynyl group and thioketal containing azide derivative bis (2-azidoethyl) 3, 3'- (propane-2, 2-diylbis (sulfanediyl)) dipropanoate (TK-N3). The CCL/TK micelles were obtained with small size of 146.4 nm, showing excellent stability against dilution and high doxorubicin (DOX) loading. In vitro toxicity tests demonstrated that the obtained CCL/TK micelles have good biocompatibility and low toxicity with cell viability above 95 %. Furthermore, DOX-loaded CCL/TK micelles showed significantly superior toxicity with IC50 values for HeLa and MCF-7 cells about 3.74 µg/mL and 3.91 µg/mL, respectively. Confocal laser scanning microscope (CLSM) and flow cytometry showed excellent internalization efficiency and intracellular drug release of DOX-loaded CCL/TK micelles. The obtained ROS-responsive CCL/TK micelles showed great potential for anticancer drug delivery.