pH buffer KH2PO4 boosts zinc ion battery performance via facilitating proton reaction of MnO2 cathode.

Zinc-ion batteries (ZIBs) are rapidly emerging as safe, cost-effective, nontoxic, and environmentally friendly energy storage systems. However, mildly acidic electrolytes with depleted protons cannot satisfy the huge demand for proton reactions in MnO2 electrodes and also cause several issues in ZIBs, such as rapidly decaying cycling stability and low reaction kinetics. Herein, we propose a pH-buffering strategy in which KH2PO4 is added to the electrolyte to overcome the problems caused by low proton concentrations. This strategy significantly improves the rate and cycle stability performance of zinc-manganese batteries, delivering a high capacity of 122.5 mAh/g at a high current density of 5 A/g and enabling 9000 cycles at this current density, with a remaining capacity of 70 mAh/g. Ex-situ X-ray diffraction and scanning electron microscopy analyses confirmed the generation/dissolution of Zn3PO4·4H2O and Zn4(OH)6(SO4)·5H2O, byproducts of buffer products and proton reactions. In-situ pH measurements and chemical titration revealed that the pH change during the electrochemical process can be adjusted to a low range of 2.2-2.8, and the phosphate distribution varies with the pH range. Those results reveal that H2PO4- provides protons to the cathode through the chemical balance of HPO42-, HPO42-, and Zn3PO4·4H2O. This study serves as a guide for studying the influences and mechanisms of buffering additives in Zn-MnO2 batteries.

Oxygen Plasma Modified Carbon Cloth with C=O Zincophilic Sites as a Stable Host for Zinc Metal Anodes.

Aqueous zinc-ion batteries (ZIBs) are currently receiving widespread attention due to their merits of environmental-friendly properties, high safety, and low cost. However, the absence of stable zinc metal anodes severely restricts their potential applications. In this work, we demonstrate a simple oxygen plasma treatment method to modify the surface state of carbon cloth to construct an ideal substrate for zinc deposition to solve the dendrite growth problem of zinc anodes. The plasma treated carbon cloth (PTCC) electrode has lower nucleation overpotential and uniformly distributed C=O zincophilic nucleation sites, facilitating the uniform nucleation and subsequent homogeneous deposition of zinc. Benefiting from the superior properties of PTCC substrate, the enhanced zinc anodes demonstrate low voltage hysteresis (about 25 mV) and stable zinc plating/stripping behaviors (over 530 h lifespan) at 0.5 mA cm-2 with 15% depth of discharge (DOD). Besides, an extended cycling lifespan of 480 h can also be achieved at very high DOD of 60%. The potential application of the enhanced zinc anode is also confirmed in Zn|V10O24·12H2O full cell. The cells with Zn@PTCC electrode demonstrate remarkable rate capability and excellent cycling stability (95.0% capacity retention after 500 cycles).

High-Performance Aqueous Zinc-Ion Batteries Realized by MOF Materials.

Rechargeable aqueous zinc-ion batteries (ZIBs) have been gaining increasing interest for large-scale energy storage applications due to their high safety, good rate capability, and low cost. However, the further development of ZIBs is impeded by two main challenges: Currently reported cathode materials usually suffer from rapid capacity fading or high toxicity, and meanwhile, unstable zinc stripping/plating on Zn anode seriously shortens the cycling life of ZIBs. In this paper, metal-organic framework (MOF) materials are proposed to simultaneously address these issues and realize high-performance ZIBs with Mn(BTC) MOF cathodes and ZIF-8-coated Zn (ZIF-8@Zn) anodes. Various MOF materials were synthesized, and Mn(BTC) MOF was found to exhibit the best Zn2+-storage ability with a capacity of 112 mAh g-1. Zn2+ storage mechanism of the Mn(BTC) was carefully studied. Besides, ZIF-8@Zn anodes were prepared by coating ZIF-8 MOF material on Zn foils. Unique porous structure of the ZIF-8 coating guided uniform Zn stripping/plating on the surface of Zn anodes. As a result, the ZIF-8@Zn anodes exhibited stable Zn stripping/plating behaviors, with 8 times longer cycle life than bare Zn foils. Based on the above, high-performance aqueous ZIBs were constructed using the Mn(BTC) cathodes and the ZIF-8@Zn anodes, which displayed an excellent long-cycling stability without obvious capacity fading after 900 charge/discharge cycles. This work provides a new opportunity for high-performance energy storage system.

Investigation of zinc ion storage of transition metal oxides, sulfides, and borides in zinc ion battery systems.

Zn-ion batteries have been widely investigated due to their low cost, high safety and eco-friendliness. We comprehensively evaluate the performance of oxides (MoO3, TiO2, and Fe3O4), sulfides (MoS2, WS2, and MnS) and borides (TiB2 and ZrB2) in zinc ion battery systems. It is found that MnS is a good alternative cathode material with a reversible capacity of 221 mA h g-1, while the other materials show different behaviours.

Simultaneous Production of High-Performance Flexible Textile Electrodes and Fiber Electrodes for Wearable Energy Storage.

High-performance flexible textile electrodes and fiber electrodes are produced simultaneously by a newly proposed effective strategy. Activated carbon fiber cloth (ACFC)/carbon nanotubes (CNTs) and ACFC/MnO2/CNTs composites are designed as high-performance flexible textile electrodes. Theses textiles can also be easily dismantled into individual fiber bundles used as high-performance flexible fiber electrodes.