RESUMO
BACKGROUND AND AIM: 3D fusion model of cone-beam computed tomography (CBCT) and oral scanned data can be used for the accurate design of root canal access and guide plates in root canal therapy (RCT). However, the pose accuracy of the dental pulp and crown in data registration has not been investigated, which affects the precise implementation of clinical planning goals. We aimed to establish a novel registration method based on pulp horn mapping surface (PHMSR), to evaluate the accuracy of PHMSR versus traditional methods for crown-pulp registration of CBCT and oral scan data. MATERIALS AND METHODS: This vitro study collected 8 groups of oral scanned and CBCT data in which the left mandibular teeth were not missing, No. 35 and No. 36 teeth were selected as the target teeth. The CBCT and scanned model were processed to generate equivalent point clouds. For the PHMSR method, the similarity between the feature directions of the pulp horn and the surface normal vectors of the crown were used to determine the mapping points in the CBCT point cloud that have a great influence on the pulp pose. The small surface with adjustable parameters is reconstructed near the mapping point of the crown, and the new matching point pairs between the point and the mapping surface are searched. The sparse iterative closest point (ICP) algorithm is used to solve the new matching point pairs. Then, in the C + + programming environment with a point cloud library (PCL), the PHMSR, the traditional sparse ICP, ICP, and coherent point drift (CPD) algorithms are used to register the point clouds under two different initial deviations. The root square mean error (RSME) of the crown, crown-pulp orientation deviation (CPOD), and position deviation (CPPD) were calculated to evaluate the registration accuracy. The significance between the groups was tested by a two-tailed paired t-test (p < 0.05). RESULTS: The crown RSME values of the sparse ICP method (0.257), the ICP method (0.217), and the CPD method (0.209) were not significantly different from the PHMSR method (0.250). The CPOD and CPPD values of the sparse ICP method (4.089 and 0.133), the ICP method (1.787 and 0.700), and the CPD method (1.665 and 0.718) than for the PHMSR method, which suggests that the accuracy of crown-pulp registration is higher with the PHMSR method. CONCLUSION: Compared with the traditional method, the PHMSR method has a smaller crown-pulp registration accuracy and a clinically acceptable deviation range, these results support the use of PHMSR method instead of the traditional method for clinical planning of root canal therapy.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Polpa Dentária , Imageamento Tridimensional , Tomografia Computadorizada de Feixe Cônico/métodos , Humanos , Polpa Dentária/diagnóstico por imagem , Técnicas In Vitro , Imageamento Tridimensional/métodos , Coroa do Dente/diagnóstico por imagem , Coroa do Dente/anatomia & histologia , Modelos Dentários , Tratamento do Canal Radicular/métodos , Estudo de Prova de ConceitoRESUMO
Zeolite nanosheets with an extremely thin thickness featuring both unique pore systems and low diffusion resistance have the potential to achieve enhanced catalytic performance in the conversion of bulky molecular biomass. The preparation of unit-cell level nanosheets generally requires complex and costly multifunctional surfactants or an organic structure-directing agent (OSDA). Commercially available and environmentally friendly ionic liquids can also direct the structure of zeolite nanosheets by π-π stacking when these kinds of OSDA are used in large amount. Herein, we first report unit-cell-sized silicogermanate nanosheets of NS-IM-20 (UWY topology), 5 nm in thickness, which were synthesized at a relatively low ionic liquid concentration with the assistance of halide ion (Cl-). The Pd-loaded NS-IM-20 nanosheets with a hierarchical porosity and moderate acidity act as promising bifunctional catalysts for selective biomass conversion.
RESUMO
Layered zeolitic silicates and corresponding interlayer-expanded porous materials exhibit attractive application potential in wide fields. Nonetheless, designable synthesis and structure analysis of layered silicates remain challenging. Herein, two kinds of layered silicates are synthesized using different di-quaternary ammonium-type organic structure-directing agents (OSDAs). Their crystal structures are analyzed and verified by 3D electron diffraction (3D ED) and high-resolution TEM imaging. The suitable configurations of OSDA can lead to desirable interlayer states. Additionally, two new zeolite structures both with 12-membered ring (MR) channels intersected by 8 MR channels and larger interlayer spaces are constructed from layered silicate precursors by interlayer silylation. The new zeolitic material exhibits potential application in adsorption of organic pollution and catalytic reaction. This study is expected to develop versatile ways for the design and synthesis of layered silicates even zeolites and provide references in characterizing layered materials and zeolites as well.
RESUMO
A multidimensional extra-large pore zeolite with highly hydrothermal stability, denoted as -IRT-HS, has been developed successfully, starting from Ge-rich germanosilicate precursor hydrothermally directed by a small and commercially available piperidinium-type organic structure-directing agent (OSDA). -IRT-HS, with the supermicropores, is structurally analogues to 28-membered ring -IRT topology as confirmed by various spectroscopic techniques. And it is the high-silica (Si/Ge=58) zeolite with the largest pore size as well. Notably, using acid-washed as-made Ge-rich -IRT precursor as the silicon source is crucial to restore partially collapsed structure into a stable framework by OSDA-assisted recrystallization. The calcined -IRT-HS maintains a high crystallinity, even when stored in a humid environment for extended periods or directly exposed to water. Additionally, high silica Al-containing analogue is also readily synthesized, serving as an active solid-acid catalyst in 1,3,5-triisopropylbenzene cracking reaction, yielding an impressive initial conversion up to 76.1 % much higher than conventional large-pore Beta zeolite (30.4 %). This work will pave the way for the designed synthesis of targeted high-silica zeolites with stable and extra-large pore frameworks, mimicking the structures of existing Ge-rich counterparts.
RESUMO
The incidence of oral malocclusion is increasing and is seriously damaging the oral health of human beings. The Kitchon root-controlled auxiliary archwire is an individualized orthodontic arch. It is used clinically for the treatment of tooth-lingual tilt/root-lip tilt phenomenon of the central incisors. However, the bending parameters of the Kitchon root-controlled auxiliary archwire used in different patients are based on the clinical experience of the dentists. Therefore, this orthodontic treatment has a high risk and unpredictability. In this paper, the loading performance and orthodontic process of Kitchon root-controlled auxiliary archwire are analyzed. And the prediction model of support resistance and correction torque are established. The bending parameters of the Kitchon root-controlled auxiliary archwire, as well as the effect of the bending parameters on the support resistance and the correction torque, are all quantified. And the prediction models for the support resistance and the correction torque are calculated separately. The correlation coefficients of calculated data and experimental data are ξT1 > .97 and ξA1 > .96, respectively; the correlation coefficients of simulated data and experimental data are ξT2 > .96 and ξA2 > .96, respectively. The accuracy and reliability of the established prediction models are verified. It provides an effective theoretical guide for dentists to safely and efficiently perform root-controlled rotation orthodontic treatment on patients' central incisors.
Assuntos
Fios Ortodônticos , Dente , Humanos , Torque , Reprodutibilidade dos Testes , Fenômenos MecânicosRESUMO
In zeolite frameworks, double four-ring (d4r) configurations are among the most frequent composite building units. The composition variations in d4r units greatly influence the energy and structural modifiability of the zeolitic framework. The introduction of germanium, with a larger ionic radius than silicon or aluminum, not only reduces the energy constraints of d4r in the nucleation and crystal growth of zeolites, but also opens a new window for constructing novel crystalline structures, especially with large or extra-large pores and channels. Ge-enriched d4r units endow germanosilicates with structure diversity readily for post treatments. Promising catalytic materials have been gradually developed and increasingly studied by direct synthesis or post-synthetic isomorphous substitution for Ge. This review focuses on the recent progress in the synthesis, modification, and catalytic application of d4r-containing zeolites, including germanosilicates, aluminosilicates, and silicates.
RESUMO
Selective conversion of syngas to value-added olefins has attracted considerable research interest. Regulating product distribution remains challenging, such as achieving higher olefin selectivity, propylene/ethylene (P/E) and olefin/paraffin (O/P) ratios. A new pentasil zeolite Al-IDM-1 with recently approved -ION structure, composed of 17-membered-ring (MR) extra-large lobed pores and intersected 10-MR medium pores, shows a C2-6 = selectivity up to 85 % and a high O/P value of 14 in the conversion of syngas when being combined with Zna Alb Ox oxide. Moreover, for the high-silica Al-IDM-1 with Si/Al ratio of 400, the selectivity of propylene and butene accounts for 88 % in C2-4 = , resulting in high P/E (>4) and butene/ethylene (B/E >3) ratios. The high C3-4 = selectivity is contributed by two main reasons, that is, the relatively weak acidity of Al-IDM-1 zeolite enhances the olefin-based cycle revealed by the probe reactions of methanol-to-propylene (MTP) and 1-hexene cracking, and the rich isolated internal SiOH groups in Al-IDM-1 promote the desorption of C3-4 = , once they are formed inside zeolite pores.
RESUMO
Resuspension is a crucial process for releasing endogenous pollution from shallow lakes into the overlying water. Fine particle sediment, which has a higher contamination risk and longer residence time, is the primary target for controlling endogenous pollution. To this end, a study coupling aqueous biogeochemistry, electrochemistry, and DNA sequencing was conducted to investigate the remediation effect and microbial mechanism of sediment elution in shallow eutrophic water. The results indicated that sediment elution can effectively remove some fine particles in situ. Furthermore, sediment elution can inhibit the release of ammonium nitrogen and total dissolved phosphorous into the overlying water from sediment resuspension in the early stage, resulting in reductions of 41.44 %-50.45 % and 67.81 %-72.41 %, respectively. Additionally, sediment elution greatly decreased the concentration of nitrogen and phosphorus pollutants in pore water. The microbial community structure was also substantially altered, with an increase in the relative abundance of aerobic and facultative aerobic microorganisms. Redundancy analysis, PICRUSt function prediction, and the correlation analysis revealed that loss on ignition was the primary factor responsible for driving changes in microbial community structure and function in sediment. Overall, the findings provide novel insights into treating endogenous pollution in shallow eutrophication water.
Assuntos
Microbiota , Poluentes Químicos da Água , Lagos/química , Sedimentos Geológicos , Fósforo/análise , Eutrofização , Poluentes Químicos da Água/análise , Nitrogênio/análise , ChinaRESUMO
OBJECTIVE: This work analyzed and compared the mechanical properties of identical cracked tooth models treated with different materials and crown parameters. Thus, to provide dentists with a more structured way to select materials and geometric parameters and determine the strongest restoration model for cracked teeth. METHODS: This work used finite element analysis (FEA). We applied 25 restorative models, including five restorative materials, and three preparation parameters. Seven mechanical properties of the cracked tooth preparation were analyzed using correlation analysis. RESULTS: The highest lifetime of the cracked preparation was obtained for crowns with a 5° of polymerization, width = 0.8 mm, and a length offset of 0.2 mm. The highest lifetime was obtained with ZC crown material, but the least deformation of the cracked tip was obtained with LU material. SIGNIFICANCE: The results showed that the larger MOE material for the crown and a reasonable increase in the thickness and length of the crown is a favorable method to prevent further cracks to extend. This FEA study, thereby forming a novel basis for clinical guidance as to preparation of dental crowns applicable to cracked teeth.
Assuntos
Síndrome de Dente Quebrado , Coroas , Humanos , Síndrome de Dente Quebrado/terapia , Análise de Elementos Finitos , Cabeça , Resinas Compostas , Materiais DentáriosRESUMO
OBJECTIVE: In this study, a preclinical approach was used to analyze and directly compare the fatigue performance (fatigue life and damage percentage) and maximum principal stresses (Max. Ps) of prepared models treated with different materials and geometric parameters. METHODS: Four groups of preparative parameters (crown width, crown length, degree of polymerization and material) were selected, each with five variables. An alternating cyclic occlusal load with an amplitude of 300 N was applied to the ball part along the longitudinal axis. The fatigue properties of the preparations and Max.Ps were analyzed. RESULTS: A shoulder width of 0.8 mm, a shoulder height offset of 0.2 mm, a degree of polymerization of 5°, and a crown material of ZC resulted in the smallest percentage of damage. In contrast, the effect of different modulus of elasticity (MOE) on Max.Ps was not significant (p = 0.609). CONCLUSION: The results suggest that the selection of larger modulus of elasticity MOE and larger Poisson's ratio material's, preparation of larger shoulder widths within safety, reasonable increase in crown length, and selection of larger degree of polymerization are favorable methods to protect the preparation.
Assuntos
Coroas , Dente Molar , Elasticidade , Análise do Estresse Dentário , Porcelana Dentária , Teste de Materiais , Análise de Elementos Finitos , CerâmicaRESUMO
An MFI-topology nanosheet zeolite with a highly a-axis-oriented structure has rarely been reported but with a great potential for industrial applications. Theoretical calculations on the interaction energies between the MFI skeleton and ionic liquid molecules indicated the possibility of preferential crystal growth along a specific direction, according to which highly a-oriented ZSM-5 nanosheets were synthesized from commercially available 1-(2-hydroxyethyl)-3-methylimidazolium and layered silicate sources. The imidazolium molecules directed the structure formation and meanwhile acted as zeolite growth modifiers to restrict the crystal growth perpendicular to the MFI bc plane, which induced unique a-axis-orientated thin sheets with â¼12 nm thickness. The a-oriented ZSM-5 exhibited more competitive propylene selectivity and longer lifetime than bulky crystals in methanol-to-propylene (MTP) reaction. This research would provide a versatile protocol for the rational design and synthesis of shape-selective zeolite catalysts with promising applications.
RESUMO
Soft robots have received a lot of attention because of their great human-robot interaction and environmental adaptability. Most soft robots are currently limited in their applications due to wired drives. Photoresponsive soft robotics is one of the most effective ways to promote wireless soft drives. Among the many soft robotics materials, photoresponsive hydrogels have received a lot of attention due to their good biocompatibility, ductility, and excellent photoresponse properties. This paper visualizes and analyzes the research hotspots in the field of hydrogels using the literature analysis tool Citespace, demonstrating that photoresponsive hydrogel technology is currently a key research direction. Therefore, this paper summarizes the current state of research on photoresponsive hydrogels in terms of photochemical and photothermal response mechanisms. The progress of the application of photoresponsive hydrogels in soft robots is highlighted based on bilayer, gradient, orientation, and patterned structures. Finally, the main factors influencing its application at this stage are discussed, including the development directions and insights. Advancement in photoresponsive hydrogel technology is crucial for its application in the field of soft robotics. The advantages and disadvantages of different preparation methods and structures should be considered in different application scenarios to select the best design scheme.
RESUMO
Membrane separation is an energy-efficient and environmentally friendly process. Two-dimensional (2D) molecular sieving membranes featuring unique nanopores and low transport resistance have the potential to achieve highly permeable and selective mixture separation with low energy consumption. High-aspect-ratio zeolite nanosheets with intrinsic molecular-sieving pores perpendicular to the layers are desirable building blocks for fabricating high-performance 2D zeolite membrane. However, a wider application of 2D zeolitic membranes is restricted by the limited number of recognized zeolite nanosheets. Herein, we report a swollen layered zeolite, ECNU-28, with SZR topology and eight-member ring (8-MR, 3.0â Å×4.8â Å) pores normal to the nanosheets. It can be easily exfoliated to construct 2D membrane, which shows a high hydrogen selectivity up to 130 from natural gas and is promising for hydrogen purification and greenhouse gas capture.
Assuntos
Nanoporos , Zeolitas , Cromatografia Líquida , HidrogênioRESUMO
OBJECTIVE: This work used 3D finite element analysis (FEA) to analyze and directly compare the stress intensity factor (SIF) and stress distribution at the crack tip of identical cracked tooth models restored with different materials and crown parameters. METHODS: A 3D model of the cracked tooth was generated. Then, we applied 25 restorative models, including three parameters (shoulder height, width, and degree of polymerization), five restorative materials (GC, IPS, LU, ZC, VE), and two combinations of types of cement (RMGIC and GIC). An occlusal load of 800N was applied to the spherical part along the longitudinal axis. The stress distribution of the preparation and the SIF of the crack tip was analyzed. RESULTS: The crack tip SIF was minimal for a shoulder height offset of 0.8 mm (P = 0.032), a shoulder width of 0.6 mm (P = 0.045), a crown material of ZC (P < 2e-16), and a cement material of RMGIC (P < 0.05), respectively. In contrast, the effect of different polymerization degrees on SIF was insignificant (P = 0.95). CONCLUSION: Our results suggest that the selection of a larger modulus of elasticity (MOE) material for the crown, the preparation of a smaller shoulder width within a safe range, a reasonable increase in the crown length, and the selection of adhesive materials with high fracture toughness are favorable methods to prevent further crack extension.
Assuntos
Coroas , Dente Molar , Análise de Elementos Finitos , Elasticidade , Cimentos de Ionômeros de Vidro , Análise do Estresse Dentário , Teste de MateriaisRESUMO
A high-silica zeolite ECNU-13 (Si/Al=23) with a new three-dimensional (3D) pore system and a nanosized morphology has been developed, consisting of multitudes of 10-membered ring (10-R) medium pores and one set of 8-R small pores. A phase-discrimination strategy was proposed to synthesize ECNU-13 by regulating the gel compositions and nucleation processes that were used for preparing 12-R large-pore germanosilicate IM-20 with the known UWY topology. The crystallization was directed towards forming one set of single four-ring (s4r) composite building units together with one set of double four-ring (d4r) rather than two different types of d4r units in IM-20. The electron crystallographic investigations elucidated that the ECNU-13 structure was composed of two kinds of polymorphs as a result of distinct atomic positionings in s4r units. In catalytic cracking of 1-butene, ECNU-13 exhibited high propene selectivity (55.6 %) and propene to ethylene molar ratio (>4.7) superior to well-studied conventional ZSM-5 zeolite catalyst.
RESUMO
BACKGROUND: Augmented reality (AR) is a new human-computer interaction technology that combines virtual reality, computer vision, and computer networks. With the rapid advancement of the medical field towards intelligence and data visualisation, AR systems are becoming increasingly popular in the medical field because they can provide doctors with clear enough medical images and accurate image navigation in practical applications. However, it has been discovered that different display types of AR systems have different effects on doctors' perception of the image after virtual-real fusion during the actual medical application. If doctors cannot correctly perceive the image, they may be unable to correctly match the virtual information with the real world, which will have a significant impact on their ability to recognise complex structures. METHODS: This paper uses Citespace, a literature analysis tool, to visualise and analyse the research hotspots when AR systems are used in the medical field. RESULTS: A visual analysis of the 1163 articles retrieved from the Web of Science Core Collection database reveals that display technology and visualisation technology are the key research directions of AR systems at the moment. CONCLUSION: This paper categorises AR systems based on their display principles, reviews current image perception optimisation schemes for various types of systems, and analyses and compares different display types of AR systems based on their practical applications in the field of smart medical care so that doctors can select the appropriate display types based on different application scenarios. Finally, the future development direction of AR display technology is anticipated in order for AR technology to be more effectively applied in the field of smart medical care. The advancement of display technology for AR systems is critical for their use in the medical field, and the advantages and disadvantages of various display types should be considered in different application scenarios to select the best AR system.
Assuntos
Realidade Aumentada , Cirurgia Assistida por Computador , Realidade Virtual , Humanos , Cirurgia Assistida por Computador/métodos , PercepçãoRESUMO
Two dimensional zeolites have drawn a lot of attention due to their structural diversity and chemical composition, which can be used to obtain 3D zeolites, for which there is no direct synthesis. Here, a new layer silicate zeolite L was synthesized using the N, N-dimethyl-(2-methyl)-benzimidazolium as the organic structure-directing agent (OSDA) in the presence of fluoride. Structure determination by single-crystal X-ray diffraction reveals that the pure silica precursor with five-ring pores in the crystalline sheets is composed of the rth layer stacking along the (001) direction in an AAAA sequence with SDA+ cations and F- residing within the interlayer spaces. Variable temperature powder X-ray diffraction (PXRD) results showed that the new layer could transform into a 3D RTH topology structure at 350 °C via 2D-3D topotactic transformation. Furthermore, a new 3D zeolite material is obtained by treating the original layer with a diethoxydimethylsilane agent under hydrochloric acid condition (HCl-DEDMS). Based on the PXRD results and the original layer structure, the new 3D zeolite structure expanding the rth layer with another Si atom is constructed, which possesses a 10×8×6 channel system. It displays a high BET surface area of 188â cm3 /g with an external surface area of 130â cm3 /g. The structure and textural properties pave a way for potential catalytic applications. The research not only provides a new layered zeolite, broadening the 2D zeolite framework types, but also allows for the discovery of a new stable 3D zeolite expanding the RTH structure with Si atom, which hasn't been reported yet.
RESUMO
Aluminosilicate nanosheets with pure IDM-1 structure, abbreviated as Al-I1, were rapidly synthesized by adjusting the F sources. Through preliminary aging, the length along the b-axis of Al-I1 was precisely tuned in the range of 40-200 nm and meanwhile the competitive growth to the MFI phase was suppressed. With improved mass transport owing to expanded pores and shortened diffusion path along the b-axis, the Al-I1 nanosheets exhibited superior catalytic performance to conventional b-axis oriented ZSM-5 in the methanol-to-propylene (MTP) reaction. The optimal Al-I1-40 catalyst with the thinnest thickness of 40 nm showed a long catalytic lifetime of 67 h and a high propylene selectivity of up to 57.1%.
RESUMO
The goal of this review is to present a detailed and comprehensive description of the published work from the past decade regarding methods of improved material, geometric design, and additional functions in root canal files. The main improved methods of files and the most common technologies were further addressed, underlining their advantages and main limitations. Online databases (the Derwent Innovations Index) were consulted on this topic. Published work from 2010 to 2022 was collected and analyzed the relevant papers were chosen for inclusion in this review. The patent map classified the latest phase of the root canal files based on the analysis of the number of patents. The performance of the root canal files, such as materials. Directly affects the quality of the root canal therapy. We provided a thorough review of advances in the field of root canal files. In particular, three categories of improved methods were examined and compared, including material-based methods, geometry-based methods, and those based on additional functions. To understand this state of the art of different improved methods of root canal files, we conducted a literature analysis and a series of comparisons between different methods. The features and limitations of each method of root canal files were further discussed. Finally, we identified promising research directions in advancing the methods for the improved performance of root canal files. There is no perfect technology for all material/geometric design/additional functions, capable alone of fulfilling all the specificity and necessities of every patient. Although it is very promising, the material of the files remains understudied, and further work is required to make material science a pervasive technology in root canal therapy, and contribute to endodontic and periapical diseases by assisting in the subsequent development of root canal files.
Assuntos
Cavidade Pulpar , Preparo de Canal Radicular , Humanos , Preparo de Canal Radicular/métodos , Tratamento do Canal Radicular , Projetos de Pesquisa , TitânioRESUMO
The lack of efficient catalysts with a wide working temperature window and vital O2 and SO2 resistance for selective catalytic reduction of NO by CO (CO-SCR) largely hinders its implementation. Here, a novel Ir-based catalyst with only 1 wt% Ir loading is reported for efficient CO-SCR. In this catalyst, contiguous Ir atoms are isolated into single atoms, and Ir-W intermetallic nanoparticles are formed, which are supported on ordered mesoporous SiO2 (KIT-6). Notably, this catalyst enables complete NO conversion to N2 at 250 °C in the presence of 1% O2 and has a wide temperature window (250-400 °C), outperforming the comparison samples with Ir isolated-single-atomic-sites and Ir nanoparticles, respectively. Also, it possesses a high SO2 tolerance. Both experimental results and theoretical calculations reveal that single Ir atoms are negatively charged, dramatically enhancing the NO dissociation, while the Ir-W intermetallic nanoparticles accelerate the reduction of the N2 O and NO2 intermediates by CO.