RESUMO
Implant-associated infections and excessive immune responses are two major postsurgical issues for successful implantation. However, conventional strategies including antibiotic treatment and inflammatory regulation are always compromised due to the comodification of various biochemical agents and instances of functional interference. It is imperative to provide implant surfaces with satisfactory antibacterial and anti-inflammatory properties. Here, a dual-effect nanostructured polyetheretherketone (PEEK) surface (NP@PDA/Zn) with bionic mechano-bactericidal nanopillars and immobilized immunomodulatory Zn2+ is designed. The constructed hybrid nanopillars display remarkable antibacterial performance against Gram-negative and Gram-positive strains through the synergy of physical and chemical bactericidal effects imposed by nanopillars and Zn2+. Meanwhile, the immunoregulatory property is evaluated through the investigation of macrophage polarization both in vitro and in vivo, and the results reveal that NP@PDA/Zn could downregulate the expression of M1-related cytokines and decrease the M1 macrophage recruitment to lower the inflammatory response. Notably, the surface exhibited exceptional biocompatibility with discerning biocidal activity between bacterial and mammalian cells and antioxidant performance that effectively scavenges ROS, minimizing potential cytotoxicity. Taken together, NP@PDA/Zn presents a convenient and promising strategy of combining synergistic bactericidal activity and inflammatory regulation without any mutual interference, which can support the development of multifunctional implant-associated materials.
Assuntos
Antibacterianos , Anti-Inflamatórios , Benzofenonas , Nanopartículas Metálicas , Nanoestruturas , Polímeros , Benzofenonas/química , Benzofenonas/farmacologia , Polímeros/química , Polímeros/farmacologia , Nanoestruturas/química , Nanopartículas Metálicas/química , Sinergismo Farmacológico , Antibacterianos/química , Antibacterianos/farmacologia , Anti-Inflamatórios/química , Anti-Inflamatórios/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Animais , Camundongos , Células RAW 264.7 , Feminino , Camundongos Endogâmicos BALB C , Propriedades de Superfície , Zinco/química , Zinco/farmacologia , Implantação de Prótese , Sobrevivência Celular/efeitos dos fármacosRESUMO
The incidence of chronic wound healing is promoted by the growing trend of elderly population, obesity, and type II diabetes. Although numerous wound dressings have been studied over the years, it is still challenging for many wound dressings to perfectly adapt to the healing process due to the dynamic and complicated wound microenvironment. Aiming at an optimal reproduction of the physiological environment, multifunctional electrospinning nanofibrous membranes (ENMs) have emerged as a promising platform for the wound treatment owing to their resemblance to extracellular matrix (ECM), adjustable preparation processes, porousness, and good conformability to the wound site. Moreover, profiting from the booming development of human-machine interaction and artificial intelligence, a next generation of intelligent electrospinning nanofibrous membranes (iENMs) based wound dressing substrates that could realize the real-time monitoring of wound proceeding and individual-based wound therapy has evoked a surge of interest. In this regard, general wound-related biomarkers and process are overviewed firstly and representative iENMs stimuli-responsive materials are briefly summarized. Subsequently, the emergent applications of iENMs for the wound healing are highlighted. Finally, the opportunities and challenges for the development of next-generation iENMs as well as translating iENMs into clinical practice are evaluated.
RESUMO
The generally nonpolar SrTiO3 has attracted more attention recently because of its possibly induced novel polar states and related paraelectric-ferroelectric phase transitions. By using controlled pulsed laser deposition, high-quality, ultrathin, and strained SrTiO3 layers were obtained. Here, transmission electron microscopy and theoretical simulations have unveiled highly polar states in SrTiO3 films even down to one unit cell at room temperature, which were stabilized in the PbTiO3/SrTiO3/PbTiO3 sandwich structures by in-plane tensile strain and interfacial coupling, as evidenced by large tetragonality (â¼1.05), notable polar ion displacement (0.019 nm), and thus ultrahigh spontaneous polarization (up to â¼50 µC/cm2). These values are nearly comparable to those of the strong ferroelectrics as the PbZrxTi1-xO3 family. Our findings provide an effective and practical approach for integrating large strain states into oxide films and inducing polarization in nonpolar materials, which may broaden the functionality of nonpolar oxides and pave the way for the discovery of new electronic materials.
RESUMO
Polymeric materials that have been extensively applied in medical devices, wearable electronics, and food packaging are readily contaminated by bothersome pathogenic bacteria. Bioinspired mechano-bactericidal surfaces can deliver lethal rupture for contacted bacterial cells through mechanical stress. However, the mechano-bactericidal activity based only on polymeric nanostructures is not satisfactory, especially for the Gram-positive strain which is generally more resistant to mechanical lysis. Here, we show that the mechanical bactericidal performance of polymeric nanopillars can be significantly enhanced by the combination of photothermal therapy. We fabricated the nanopillars through the combination of low-cost anodized aluminum oxide (AAO) template-assisted method with an environment-friendly Layer-by-Layer (LbL) assembly technique of tannic acid (TA) and iron ion (Fe3+). The fabricated hybrid nanopillar exhibited remarkable bactericidal performances (more than 99%) toward both Gram-negative Pseudomonas aeruginosa (P. aeruginosa) and stubborn Gram-positive Staphylococcus aureus (S. aureus) bacteria. Notably, this hybrid nanostructured surface displayed excellent biocompatibility for murine L929 fibroblast cells, indicating a selective biocidal activity between bacterial cells and mammalian cells. Thus, the concept and antibacterial system described here present a low-cost, scalable, and highly repeatable strategy for the construction of physical bactericidal nanopillars on polymeric films with high performance and biosafety, but without any risks of causing antibacterial resistance.
Assuntos
Nanoestruturas , Staphylococcus aureus , Animais , Camundongos , Terapia Fototérmica , Propriedades de Superfície , Nanoestruturas/química , Antibacterianos/farmacologia , Antibacterianos/química , Pseudomonas aeruginosa , Polímeros , MamíferosRESUMO
Pathogenic bacteria contamination ubiquitously occurs on high-contact surfaces in hospitals and has long been a threat to public health, inducing severe nosocomial infections that cause multiple organ dysfunction and increased hospital mortality. Recently, nanostructured surfaces with mechano-bactericidal properties have shown potential for modifying material surfaces to fight against the spread of pathogenic microorganisms without the risk of triggering antibacterial resistance. Nevertheless, these surfaces are readily contaminated by bacterial attachment or inanimate pollutants like solid dust or common fluids, which has greatly weakened their antibacterial capabilities. In this work, we discovered that the nonwetting Amorpha fruticosa leaf surfaces are equipped with mechano-bactericidal capacity by means of their randomly-arranged nanoflakes. Inspired by this discovery, we reported an artificial superhydrophobic surface with similar nanofeatures and superior antibacterial abilities. Compared to conventional bactericidal surfaces, this bioinspired antibacterial surface was synergistically accompanied by antifouling performances, which significantly prevent either initial bacterial attachment or inanimate pollutants like dust covering and fluid contaminants. Overall, the bioinspired antifouling nanoflakes surface holds promise as the design of next-generation high-touch surface modification that effectively reduces the transmission of nosocomial infections.
Assuntos
Incrustação Biológica , Infecção Hospitalar , Nanoestruturas , Humanos , Propriedades de Superfície , Incrustação Biológica/prevenção & controle , Nanoestruturas/química , Antibacterianos/farmacologia , Antibacterianos/química , Bactérias , Infecção Hospitalar/prevenção & controleRESUMO
Antiferroelectrics characterized by voltage-driven reversible transitions between antiparallel and parallel polarity are promising for cutting-edge electronic and electrical power applications. Wide-ranging explorations revealing the macroscopic performances and microstructural characteristics of typical antiferroelectric systems have been conducted. However, the underlying mechanism has not yet been fully unraveled, which depends largely on the atomistic processes. Herein, based on atomic-resolution transmission electron microscopy, the deterministic phase transition pathway along with the underlying lattice-by-lattice details in lead zirconate thin films was elucidated. Specifically, we identified a new type of ferrielectric-like dipole configuration with both angular and amplitude modulations, which plays the role of a precursor for a subsequent antiferroelectric to ferroelectric transformation. With the participation of the ferrielectric-like phase, the phase transition pathways driven by the phase boundary have been revealed. We provide new insights into the consecutive phase transformation in low-dimensional lead zirconate, which thus would promote potential antiferroelectric-based multifunctional devices.
RESUMO
Microstructured surfaces with stimuli-responsive performances have aroused great attention in recent years, but it still remains a significant challenge to endow surfaces with precisely controlled morphological changes in microstructures, so as to get the precise control of regional properties (e.g., friction, adhesion). Herein, a kind of carbonyl iron particle-doped shape memory polyurethane micropillar with precisely controllable morphological changes is realized, upon remote near-infrared light (NIR) irradiation. Owing to the reversible transition of micropillars between bent and upright states, the micro-structured surface exhibits precisely controllable low-to-high friction transitions, together with the changes of friction coefficient ranging from â¼0.8 to â¼1.2. Hence, the changes of the surface friction even within an extremely small area can be precisely targeted, under local NIR laser irradiation. Moreover, the water droplet adhesion force of the surface can be reversibly switched between â¼160 and â¼760 µN, demonstrating the application potential in precisely controllable wettability. These features indicate that the smart stimuli-responsive micropillar arrays would be amenable to a variety of applications that require remote, selective, and on-demand responses, such as a refreshable Braille display system, micro-particle motion control, lab-on-a-chip, and microfluidics.
RESUMO
Constructing safe and effective antibacterial surfaces has continuously received great attention, especially in healthcare-related fields. Bioinspired mechano-bactericidal nanostructure surfaces could serve as a promising strategy to reduce surface bacterial contamination while avoiding the development of antibiotic resistance. Although effective, these nanostructure surfaces are prone to be contaminated by the accumulation of dead bacteria, inevitably compromising their long-term antibacterial activity. Herein, a bioinspired nanopillar surface with both mechano-bactericidal and releasing actions is developed, via grafting zwitterionic polymer (poly(sulfobetaine methacrylate) (PSBMA)) on ZnO nanopillars. Under dry conditions, this nanopillar surface displays remarkable mechano-bactericidal activity, because the collapsed zwitterionic polymer layer makes no essential influence on nanopillar structure. Once being incubated with aqueous solution, the surface could readily detach the killed bacteria and debris, owing to the swelling of the zwitterionic layer. Consequentially, the surface antibacterial performances can be rapidly and controllably switched between mechano-bactericidal action and bacteria-releasing activity, guaranteeing a long-lasting antibacterial performance. Notably, these collaborative antibacterial behaviors are solely based on physical actions, avoiding the risk of triggering bacteria resistance. The resultant nanopillar surface also enjoys the advantages of substrate-independency and good biocompatibility, offering potential antibacterial applications for biomedical devices and hospital surfaces.
Assuntos
Antibacterianos , Nanoestruturas , Antibacterianos/química , Antibacterianos/farmacologia , Bactérias , Nanoestruturas/química , Polímeros/química , Propriedades de SuperfícieRESUMO
Overuse of antibiotics can increase the risk of notorious antibiotic resistance in bacteria, which has become a growing public health concern worldwide. Featured with the merit of mechanical rupture of bacterial cells, the bioinspired nanopillars are promising alternatives to antibiotics for combating bacterial infections while avoiding antibacterial resistance. However, the resident dead bacterial cells on nanopillars may greatly impair their bactericidal capability and ultimately impede their translational potential toward long-term applications. Here, we show that the functions of bactericidal nanopillars can be significantly broadened by developing a hybrid thermoresponsive polymer@nanopillar-structured surface, which retains all of the attributes of pristine nanopillars and adds one more: releasing dead bacteria. We fabricate this surface through coaxially decorating mechano-bactericidal ZnO nanopillars with thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes. Combining the benefits of ZnO nanopillars and PNIPAAm chains, the antibacterial performances can be controllably regulated between ultrarobust mechano-bactericidal action (â¼99%) and remarkable bacteria-releasing efficiency (â¼98%). Notably, both the mechanical sterilization against the live bacteria and the controllable release for the pinned dead bacteria solely stem from physical actions, stimulating the exploration of intelligent structure-based bactericidal surfaces with persistent antibacterial properties without the risk of triggering drug resistance.
Assuntos
Resinas Acrílicas/farmacologia , Antibacterianos/farmacologia , Materiais Biocompatíveis/farmacologia , Nanoestruturas/química , Pseudomonas aeruginosa/efeitos dos fármacos , Óxido de Zinco/farmacologia , Resinas Acrílicas/química , Antibacterianos/química , Aderência Bacteriana/efeitos dos fármacos , Materiais Biocompatíveis/química , Teste de Materiais , Testes de Sensibilidade Microbiana , Temperatura , Óxido de Zinco/químicaRESUMO
MicroRNAs (miRNAs) can function as tumor suppressors and might provide an efficient strategy for annihilating cancer. Specific miRNAs can be reintroduced into tumor cells to elicit the tumor suppressor activities. We show that systemically delivered, synthetic miRNA mimics in complex with a novel neutral lipid emulsion are preferentially targeted to lung tumors and show therapeutic benefit in mouse models of lung cancer. The delivery was demonstrated using mimics of the tumor suppressor microRNA-495 which is found downregulated in most lung cancer. Systemic treatment of a Kras-activated autochthonous mouse model of non-small cell lung cancer (NSCLC) led to a significant decrease in tumor burden. Specifically, mice treated with microRNA-495 displayed a large reduction in tumor area compared to mice treated with a miRNA control. These findings provide direct evidence that systematically delivered synthetic miRNA mimics to the mammalian lung can inhibit tumor proliferation and support the promise of miRNAs as a targeted therapy for lung cancer in future.