Effects of silica fume powder modified by oleic acid on the settleability of bulking sludge.

Modified silica fume powder with oleic acid through coupling agent was prepared based on the in situ utilizing long-chain fatty acids (LCFA) properties of Microthrix parvicella (M. parvicella) in the activated sludge system. The modification was confirmed by XRD and infrared spectrum. The contact angle analysis showed that the modification gave the silica fume powder a hydrophobic surface. The modified silica fume powder had a good combination with M. parvicella from the SEM and Gram staining measurements. The addition of modified silica powder has a certain effect on the settling capacity of sludge, but has little effect on the sludge treatment capacity, while the SVI dropped from 400.1 to 100.0 mL/g. These suggested that the modified silica fume powder could be used as an excellent weight-increasing agent to inhibit sludge bulking.

Simulation and experimental study of fluorescence labeled polyphosphate in microthrix parvicella.

To study the binding mechanism of 4',6-diamidino-2-phenylindole (DAPI) and polyphosphate (Poly-P) and find fluorescent dyes which can dye Poly-P better, the interaction model of DAPI and Poly-P was calculated by the self-consistent-charge, density functional tight-binding (SCC-DFTB-D) method, and the binding sites of DAPI and Poly-P were analyzed. Further, Cy3, Rhodamine 6G and Fluorescein, which are structurally similar to DAPI, were selected to analyze their interactions with Poly-P. The binding energies and frontier orbital properties of the complexes were analyzed. These four fluorescent dyes were further used to dye the activated sludge smear and observe the fluorescence property. The Simulation results show that the N-containing indole ring structures in DAPI plays an important role in the interaction with Poly-P; the binding energies for DAPI, Cy3, Rhodamine 6G and Fluorescein with Poly-P are -42.6, -165.4, -34.7 and -28.9 kcal/mol, respectively. The frontier orbital properties for the complexes were studied, which further indicates that the interactions between Cy3, Rhodamine 6G and Poly-P are stronger than that of Fluorescein and Poly-P. The experimental results showed that Cy3 had excellent dyeing effect on Poly-P and could recognize them, while Fluorescein could not dye Poly-P. The experimental results were in good agreement with those predicted by simulation, which verified the correctness of our calculation method and provided a new strategy for finding more reliable, more sensitive and more economical fluorescent dyes capable of dyeing Poly-P.

Design Mechanism and Property of the Novel Fluorescent Probes for the Identification of Microthrix Parvicella In Situ.

In this study, two novel fluorescent probes, probe A and probe B were designed, synthesized and characterized, based on Microthrix parvicella (M. parvicella) preferring to utilize long-chain fatty acid (LCFA), for the labeling of M. parvicella in activated sludge. The molecular structure of probe A and probe B include long-chain alkane and LCFA, respectively. The results indicated that probe A and probe B had a large stokes shift of 118 nm and 120 nm and high quantum yield of 0.1043 and 0.1058, respectively, which were significantly helpful for the fluorescent labeling. As probe A was more stable than probe B in activated sludge, and the fluorescence intensity keep stable during 24 h, probe A was more suitable for labeling M. parvicella in situ. In addition, through the Image Pro Plus 6 (IPP 6) analysis, a quantitative relationship was established between sludge volume index (SVI) and integral optical density (IOD) of the labeled M. parvicella in activated sludge samples. The relationship between IOD and SVI conforms to Logistic curve (R² = 0.94).

Synthesis and characterization of the fluorescent probes for the labeling of Microthrix parvicella.

Although the fluorescent in situ hybridization (FISH) has been widely used to identify the Microthrix parvicella (M. parvicella), there are a few disadvantages and difficulties, such as complicated process, time consuming, etc. In this work, a series of fluorescent probes, which were modified by long-chain alkane with hydrophobic property and based on the property of M. parvicella utilizing long-chain fatty acids (LCFA), for the labeling of M. parvicella in bulking sludge were designed, synthesized, and characterized. The probes were characterized by ultraviolet-visible (UV-Vis) absorption spectra, fluorescence spectra, (1)H NMR spectra, and mass spectra, and the photostability and hydrophobic property of probes were investigated. All the results showed that the probes were quite stable and suitable for the fluorescent labeling. The probes had a large stoke shift of 98-137 nm, which was benefit for the fluorescent labeling. In the fluorescent labeling of M. parvicella by the synthesized probes, the probes had excellent labeling effects. By comparison of the images and the Image Pro Plus 6.0 analysis, the optimal concentration of the probes in the activated sludge sample for labeling was 0.010 mmol/L and the probe 3d had the best labeling. In addition, the effect of the duration time of probes was also investigated, and the results showed that the fluorescent intensity of probes hardly changed in a long period of time and it was suitable for labeling.

Design and preparation of quantum dots fluorescent probes for in situ identification of Microthrix parvicella in bulking sludge.

A series of quantum dots (QDs) fluorescent probes for the in situ identification of Microthrix parvicella (M. parvicella) in bulking sludge were designed and prepared. In the preparation of CdTe/CdS QDs, the 11-mercaptoundecanoic acid (11-acid) and 16-mercaptohexadecanoic acid (16-acid) were used as the stabilizer. The prepared QDs probes were characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and transmission electron microscopy (TEM), and the results showed that the CdTe/CdS QDs formed a core-shell structure and the long carbon chain was successfully grafted onto its surface. And the three QDs probes had different crystallinity and particle size, which was due to the inhibition effect of long carbon chain. The optical properties test results showed that although the formed core-shell structure and long carbon chain affected the fluorescent intensity, adsorption, and emission spectra of the QDs probes, the probes B and C had a large stokes-shift of 82 and 101 nm, which was a benefit for their fluorescent labeling property. In the fluorescent identification of M. parvicella, the probes B and C effectively adsorbed onto the surface of M. parvicella through a hydrophobic bond, and then identified M. parvicella by their unique fluorescence. In addition, it was found that a better hydrophobic property resulted in better identification efficiency.