Rigid Phase Formation and Sb3+ Doping of Tin (IV) Halide Hybrids toward Photoluminescence Enhancement and Tuning for Anti-Counterfeiting and Information Encryption.

Multi-excitonic emitting materials in luminescent metal halides are emerging candidates for anti-counterfeiting and information encryption applications. Herein, ATPP2SnCl6 (ATPP = acetonyltriphenylphosphonium) phase was designed and synthesized by rationally choosing emissive organic reagent of ATPPCl and non-toxic stable metal ions of Sn4+, and Sb3+ was further doped into ATPP2SnCl6 to tune the photoluminescence with external self-trapped excitons emission. The derived non-toxic ATPP2SnCl6 shows multi-excitonic luminescent centers verified by optical study and differential charge-density from density functional theory calculations. Incorporation of Sb3+ dopants and the increasing concentrations induce the efficient energy transfer therein, thus enhancing photoluminescence quantum yield from 5.1% to 73.8%. The multi-excitonic emission inspires the creation of information encryption and decryption by leveraging the photoluminescence from ATPPCl to ATPP2SnCl6 host and ATPP2SnCl6:Sb3+. This study facilitates the anti-counterfeiting application by employing solution-processable luminescent metal halides materials with excitation-dependent PL properties.

Multisite Fine-Tuning in Hybrid Cadmium Halides Enables Wide Range Emissions for Anti-Counterfeiting.

Achieving tunable emissions spanning the spectrum, from blue to near-infrared (NIR) light, within a single component is a formidable challenge with significant implication, particularly in tailoring multicolor luminescence for anti-counterfeiting purposes. In this study, we demonstrate a broad spectrum of emissions, covering blue to red and extending into NIR light in [BPy]2CdX4 : xSb3+ (BPy=Butylpyridinium; X=Cl, Br; x=0 to 0.08) through precise multisite structural fine-tuning. Notably, the multicolor emissions from [BPy]2CdBr4 : Sb3+ manifest a distinctive pattern, transitioning from blue to yellow in tandem with the host [BPy]2CdBr4 and further extending from yellow to NIR with its homologous [BPy]2CdCl4 : Sb3+, resulting in the simultaneous presence of intersecting and independent emission colors. Detailed modulation of chemical composition enables partial luminescence switching, facilitating the creation of diverse patterns with multicolor luminescence by employing [BPy]2CdX4 : xSb3+ as phosphors. This study for the first time successfully implements several groups of tunable emission colors in a single matrix via multisite fine-tuning. Such an effective strategy not only develops the specific relationships between tunable emissions and adjustable compositions, but also introduces a cost-effective and straightforward approach to achieving unique, high-level, plentiful-color and multiple-information-storage labels for advanced anti-counterfeiting applications.

Narrow-Band Green-Emitting Hybrid Organic-Inorganic Eu (II)-Iodides for Next-Generation Micro-LED Displays.

Low-dimensional metal halide perovskites are an emerging class of light-emitting materials for LED-based displays; however, their B-site cations are confined to ns2, d5, and d10 metals. Here, the design of divalent rare earth ions at B-site is presented and a novel Eu(II)-based iodide hybrid is reported with efficient (PLQY ≈98%) narrow-band (FWHM ≈43 nm) green emission and high thermal stability (97%@150 °C). Owing to reduced lattice vibrations and shrunken average distance of Eu(II)-iodide bonds in the face-sharing 1D-structure, photoluminescence from Eu(II) 4f-5d transition appears along with elevated crystal-field splitting of 5d energy level. The Eu(II)-based iodide hybrid is further demonstrated for color-pure green phosphor-converted LEDs with a maximum brightness of ≈396 000 cd m-2 and photoelectric efficiency of 29.2%. High-resolution micrometer-scale light-emitting diode (micro-LED) displays (2540 PPI) via the solution-processed screen is also presented. This work thus showcases a compelling narrow-band green emitter for commercial micro-LED displays.

In situ recrystallization of zero-dimensional hybrid metal halide glass-ceramics toward improved scintillation performance.

Zero-dimensional (0D) hybrid metal halide (HMH) glasses are emerging luminescent materials and have gained attention due to their transparent character and ease of processing. However, the weakening of photoluminescence quantum efficiency from crystal to glass phases poses limitations for photonics applications. Here we develop high-performance glass-ceramic (G-C) scintillators via in situ recrystallization from 0D HMH glass counterparts composed of distinct organic cations and inorganic anions. The G-C scintillators maintain excellent transparency and exhibit nearly 10-fold higher light yields and lower detection limits than those of glassy phases. The general in situ recrystallization within the glass component by a facile heat treatment is analyzed via combined experimental elaboration and structural/spectral characterization. Our results on the development of G-Cs can initiate more exploration on the phase transformation engineering in 0D HMHs, and therefore make them highly promising for large-area scintillation screen applications.

Reversible Luminescent Switching Induced by Heat/Water Treatment in a Zero-Dimensional Hybrid Antimony(â ¢) Chloride.

Recently zero-dimensional (0-D) inorganic-organic metal halides (IOMHs) have become a promising class of optoelectronic materials. Herein, we report a new photoluminescent (PL) 0-D antimony(III)-based IOMH single crystal, namely [H2BPZ][SbCl5]·H2O (BPZ = benzylpiperazine). Photophysical characterizations indicate that [H2BPZ][SbCl5]·H2O exhibits singlet/triplet dual-band emission. Density functional theory (DFT) calculations suggest that [H2BPZ][SbCl5]·H2O has the large energy difference between singlet and triplet states, which might induce the dual emission in this compound. Temperature-dependent PL spectra analyses suggest the soft lattice and strong electron-phonon coupling in this compound. Thermogravimetric analysis shows that the water molecules in the lattice of the title crystal could be removed by thermal treatment, giving rise to a dehydrated phase of [H2BPZ][SbCl5]. Interestingly, such structural transformation is accompanied by a reversible PL emission transition between red light (630 nm, dehydrated phase) and yellow light (595 nm, water-containing phase). When being exposed to an environment with 77% relative humidity, the emission color of the dehydrated phase was able to change from red to yellow within 20 s, and the red emission could be restored after reheating. The red to yellow emission switching could be achieved in acetone with water concentration as low as 0.2 vol%. The reversible PL transition phenomenon makes [H2BPZ][SbCl5]·H2O a potential material for luminescent water-sensing.

Energy-Trapping Management in X-Ray Storage Phosphors for Flexible 3D Imaging.

X-ray imaging has received sustained attention for healthcare diagnostics and nondestructive inspection. To develop photonic materials with tunable photophysical properties in principle accelerates radiation detection technologies. Here the rational design and synthesis of doped halide perovskite CsCdCl3 :Mn2+ , R4+ (R = Ti, Zr, Hf, and Sn) are reported as next generation X-ray storage phosphors, and the capability is greatly improved by trap management via Mn2+ site occupation manipulation and heterovalent substitution. Specially, CsCdCl3 :Mn2+ , Zr4+ displays zero-thermal-quenching (TQ) radioluminescence and anti-TQ X-ray-activated persistent luminescence even up to 448 K, further revealing the charge-carrier compensation and redeployment mechanisms. X-ray imaging with the resolution of 12.5 lp mm-1 is demonstrated, and convenient 3D X-ray imaging for the curved objects is realized in a time-lapse manner. This work demonstrates efficient modulation of energy traps to achieve high storage capacities and promote future research into flexible X-ray detectors.

Multiexciton Generation from a 2D Organic-Inorganic Hybrid Perovskite with Nearly 200% Quantum Yield of Red Phosphorescence.

2D organic-inorganic hybrid perovskites (OIHPs) show obvious advantages in the field of optoelectronics due to their high luminescent stability and good solution processability. However, the thermal quenching and self-absorption of excitons caused by the strong interaction between the inorganic metal ions lead to a low luminescence efficiency of 2D perovskites. Herein, a 2D Cd-based OIHP phenylammonium cadmium chloride (PACC) with a weak red phosphorescence (ΦP  < 6%) at 620 nm and a blue afterglow is reported. Interestingly, the Mn-doped PACC exhibits very strong red emission with nearly 200% quantum yield and 15 ms lifetime, thus resulting in a red afterglow. The experimental data prove that the doping of Mn2+ not only induces the multiexciton generation (MEG) process of the perovskite, avoiding the energy loss of inorganic excitons, but also promotes the Dexter energy transfer from organic triplet excitons to inorganic excitons, thus realizing the superefficient red-light emission of Cd2+ . This work suggests that guest metal ions can induce host metal ions to realize MEG in 2D bulk OIHPs, which provides a new idea for the development of optoelectronic materials and devices with ultrahigh energy utilization.

Sequential and Reversible Phase Transformations in Zero-Dimensional Organic-Inorganic Hybrid Sb-based Halides towards Multiple Emissions.

Zero-dimensional (0D) metal halides have drawn increasing attention due to the attractive structure dependent photoluminescence (PL) properties. Here, we report two new 0D organic-inorganic hybrid Sb-based halides, (MTP)6 SbBr6 Sb2 Br9 ⋅H2 O (MTP=Methyltriphenylphosphonium, crystal 1) and (MTP)2 SbBr5 (crystal 2), featuring a reversible structural phase transformation and tunable orange and red emissions upon dehydration and rehydration of H2 O molecules. Intriguingly, a subsequent heat treatment further enables the formation of glassy state (MTP)2 SbBr5 (glass 3) with near-infrared luminescence, moreover, a sequential reverse phase transformation from glass 3 to crystal 2 and 1 is triggered by acetonitrile and water vapor stepwise. The anti-counterfeiting demo based on the tunable and reversible PL switching is finally achieved and thus the phase structure engineering in 0D metal halides expands their multiple applications in optical fields.

Seed-Crystal-Induced Cold Sintering Toward Metal Halide Transparent Ceramic Scintillators.

Scintillators with high spatial resolution at a low radiation dose rate are desirable for X-ray medical imaging. To challenge the state-of-art technology, it is necessary to design large-area wafers with high light yield, oriented light transport, and reduced light scattering. Here, a seed-crystal-induced cold sintering is adopted and a <001>-textured TPP2 MnBr4 (TPP: tetraphenylphosphonium) transparent ceramic is fabricated with a large-area wafer of 5 cm in diameter, exhibiting high optical transparency of above 68% over the 450-600 nm range. The compelling scintillation performance of the TPP2 MnBr4 wafer includes a light yield of ≈78 000 ± 2000 photons per MeV, a low detection limit 8.8 nanograys per second, about 625 times lower than the requirement of X-ray diagnostics (5500 nanograys per second), and an energy resolution of 17% for high-energy γ-rays (662 keV). X-ray imaging demonstrates a high spatial resolution of 15.7 lp mm-1 . Moreover, the designed material exhibits good retention of the radioluminescence intensity and light yield. This work presents a paradigm for achieving light-guiding properties with high transparency and large-area fabrication by grain orientation engineering, and the transparent, textured metal halide ceramic scintillator is expected to provide a route for advancement in the X-ray imaging of tomorrow.

Nearly one-fold enhancement in photoluminescence quantum yield for isostructural zero-dimensional hybrid antimony(III) bromides by supramolecular interaction adjustments.

Zero-dimensional (0D) organic-inorganic metal halides (OIMHs) hold promise in photoluminescence properties and related applications. Thus far, the photoluminescence quantum yields (PLQYs) of the reported 0D hybrid antimony(III) bromides (HABs) are not as high as those of the chloride analogs; therefore, the improvement of PLQY is an important issue for luminescent HABs. Herein, a supramolecular interaction adjustment strategy to improve the PLQYs of HABs is proposed. Two isostructural 0D HABs that crystallize with different lattice solvent molecules, namely [EtPPh3]2[SbBr5]·EtOH (1·EtOH-Br; EtPPh3 = ethyltriphenylphosphonium; EtOH = ethanol) and [EtPPh3]2[SbBr5]·MeCN (1·MeCN-Br; MeCN = acetonitrile), have been synthesized. Both of them exhibit typical self-trapped exciton (STE) photoluminescence (PL) with broad emission, a large Stokes shift and a long lifetime. They show deviation in deep-red emission peaks (655 nm vs. 661 nm) owing to the difference in the distortion level of [SbBr5]2- anions. Most importantly, 1·EtOH-Br exhibits a nearly one-fold enhancement in PLQY compared to 1·MeCN-Br (18.26% vs. 9.29%). Density functional theory (DFT) calculations, hydrogen bonding analysis and Hirshfeld surface analysis suggest that the PLQY enhancement is due to the structural rigidity improvement brought by hydrogen bonding adjustments between the inorganic [SbBr5]2- anions and solvent molecules. This work provides a new insight into the structure-property relationship study and PLQY improvement for 0D OIMHs.

Highly selective cesium(I) capture under acidic conditions by a layered sulfide.

Radiocesium remediation is desirable for ecological protection, human health and sustainable development of nuclear energy. Effective capture of Cs+ from acidic solutions is still challenging, mainly due to the low stability of the adsorbing materials and the competitive adsorption of protons. Herein, the rapid and highly selective capture of Cs+ from strongly acidic solutions is achieved by a robust K+-directed layered metal sulfide KInSnS4 (InSnS-1) that exhibits excellent acid and radiation resistance. InSnS-1 possesses high adsorption capacity for Cs+ and can serve as the stationary phase in ion exchange columns to effectively remove Cs+ from neutral and acidic solutions. The adsorption of Cs+ and H3O+ is monitored by single-crystal structure analysis, and thus the underlying mechanism of selective Cs+ capture from acidic solutions is elucidated at the molecular level.

Unveiling White Light Emission of a One-Dimensional Cu(I)-Based Organometallic Halide toward Single-Phase Light-Emitting Diode Applications.

Luminescent organometallic halide crystals, especially with single-component white emission, are urgently needed for light-emitting diode (LED) applications. Barriers for the applications, however, lie in their lead toxicity, poor stability, and low photoluminescence quantum yield (PLQY). Here, a one-dimensional Cu(I)-based hybrid metal halide (C12H24O6)CsCu2Br3 is designed and prepared via a simple solution method. Upon 365 nm excitation, a broad-band white light emission centered at 535 nm with a full width at half maximum of 186 nm and a PLQY of 78.3% is monitored. The experimental results together with calculation data indicate that the existence of the split peaks at 486 and 570 nm at a low temperature is attributed to the decrease of energy level degeneracy by virtue of the lattice distortion. Moreover, the stability along with the good device performance of the as-fabricated white LED was also discussed. The results demonstrate that (C12H24O6)CsCu2Br3 is highly competitive in lighting application, and it can further enable breakthrough material design for new luminescent organometallic halides.

A deep-red-emission antimony(III) chloride with dual-cations: extremely large Stokes shift due to high [SbCl6] distortion.

Compound [C5mim][Mim]2[SbCl6] (1; [C5mim]+ = 1-pentyl-3-methylimidazolium; [Mim]+ = N-methylimidazolium) with dual cations exhibits the first case of deep-red emission in [SbCl6]3--based 0D OIMHs. Anion distortion due to high disequilibrium of supramolecular interactions is revealed to be responsible for the extremely large Stokes shift of 335 nm and FWHM of 210 nm in the emission.

Ionic indium(III) chloride hybrids incorporating a 2,2'-bipyrimidine ligand: studies on photoluminescence and structural transformation.

Although luminescent indium(III) based halide perovskites have been widely investigated, the study of emissive indium(III) halide hybrids is limited. Three indium(III) chloride hybrids based on a bpym ligand were synthesized, namely [EPy]2[InCl4(bpym)InCl4]·DMF (1), [EPy]2[InCl4(bpym)InCl4] (2), and [BPy]2[InCl4(bpym)InCl4] (3) (EPy = N-ethylpyridinium; BPy = N-butylpyridinium; bpym = 2,2'-bipyrimidine). They all exhibit a zero-dimensional structure, in which the ligand bpym interconnects two [InCl4]- to form a [InCl4(bpym)InCl4]2- anion that is further charge-compensated by the corresponding pyridinium cations. This is the first time using bpym to coordinate with an In atom. At 298 K, 1 exhibits a weak emission at 600 nm while 2 and 3 exhibit emissions peaking at 500 nm and 540 nm, respectively. Interestingly, the DMF solvent molecule in 1 can be removed by heating, thus resulting in the structural transformation of 1 into 2 together with a photoluminescence (PL) change. Density functional theory (DFT) calculations confirm that halogen-to-ligand charge-transfer (HLCT) occurs in the emission process. To the best of our knowledge, this is the first report on PL of ionic indium(III) halide hybrids incorporating organic ligands.

Selective Luminescence Response of a Zero-Dimensional Hybrid Antimony(III) Halide to Solvent Molecules: Size-Effect and Supramolecular Interactions.

Zero-dimensional (0D) metal halides with solid-state luminescence switching (SSLS) have attracted attention as sensors and luminescent anticounterfeiting. Herein, selective solvent molecule response and accordingly luminescence switching were discovered in 0D [EtPPh3]2[SbCl5] (1, EtPPh3 = ethyltriphenylphosphonium). More than a dozen kinds of solvent molecules have been tested to find out the selection rule for molecule absorption in 1, which is demonstrated to be the size effect of guest molecules. Confirmed by crystal structural analysis, only the solvents with molecular volume less than 22.3 Å3 could be accommodated in 1 leading to the solvatochromic photoluminescence (PL). The mechanism of solvatochromic PL was also deeply studied, which was found to be closely related to the supramolecular interactions between solvent molecules and the host material. Different functional groups of the solvent molecule can affect its strength of hydrogen bonding with [SbCl5]2-, which is crucial for the distortion level of [SbCl5]2- unit and thus results in not only distinct solvatochromic PL but also distinct thermochromic PL. In addition, they all show typical self-trapped exciton triplet emissions. The additional supramolecular interactions from guest molecules can enhance the photoluminescence quantum yield to be as high as 95%.

Crystalline-Phase-Recognition-Induced Domino Phase Transition and Luminescence Switching for Advanced Information Encryption.

Herein, a new mechanism, namely, crystalline phase recognition (CPR), is proposed for the single-crystal-to-single-crystal (SCSC) transition of metal halides. Chiral ß-[Bmmim]2 SbCl5 (Bmmim=1-butyl-2,3-methylimidazolium) can recognize achiral α-[Bmmim]2 SbCl5 on the basis of a key-lock feature through intercontact of their single crystals, resulting in a domino phase transition (DPT). The concomitant photoluminescence (PL) switching enables observation of the DPT in situ. The liquid eutectic interface, stress-strain transfer, and feasible thermodynamics are key issues for the CPR. DFT calculations and PL measurements revealed that the optical absorption and emission of the isomers mainly originate from [SbCl5 ]2- anions. The structural effects (e.g., supramolecular interactions and [SbCl5 ]2- distortion) on the optical emission are clarified. As a novel type of stimuli response, the CPR-induced DPT and luminescence switching exhibit potential for application in advanced time-resolved information encryption.

Efficient Removal of Cs+ and Sr2+ Ions by Granulous (Me2NH2)4/3(Me3NH)2/3Sn3S7·1.25H2O/Polyacrylonitrile Composite.

The need to effectively and selectively remove radioactive 137Cs and 90Sr from nuclear waste solutions persists to mitigate their environmental mobility and high radiotoxicity. Because it is difficult to effectively remove them from acidic environments that degrade most sorbents, new sorbent materials are highly desirable. Here, efficient removal of Cs+ and Sr2+ is achieved by the composite of layered tin sulfide (Me2NH2)4/3(Me3NH)2/3Sn3S7·1.25H2O (FJSM-SnS) and polyacrylonitrile (PAN) (FJSM-SnS/PAN). The granulous composite possesses regular particle morphology and good mechanical strength as an engineered form. It shows excellent acid-base and γ-irradiation resistance, high maximum adsorption capacities (qm) of 296.12 and 62.88 mg/g for Cs+ and Sr2+ ions, respectively, and high selectivity even in the presence of excess Na+ ions or using lake water. Impressively, qmCs of FJSM-SnS/PAN reaches 89.29 mg/g under even acidic conditions (pH = 2.5). The column loaded with FJSM-SnS/PAN granules exhibits high removal rates (R) toward low-concentration Cs+ and Sr2+ ions under both neutral and acidic conditions. Moreover, the composite can be recycled and reused with high RCs and RSr. This work highlights the great potential of metal sulfide ion-exchangers in engineered form for the efficient removal of Cs+ or Sr2+ ions, especially under acidic conditions, for radionuclide remediation.

Co-luminescence in a zero-dimensional organic-inorganic hybrid antimony halide with multiple coordination units.

Zero-dimensional (0D) organic-inorganic hybrid metal halides (OIMHs) containing multiple halometallate species (HMSs) have received extensive attention due to their capability to achieve multifunctional photophysical characteristics. Herein we report a lead-free 0D-OIMH compound, namely [Emim]8[SbCl6]2[SbCl5] (1, Emim = 1-ethyl-3-methylimidazolium), which is the first crystal containing two distinct mononuclear [SbXn]3-n units in one single structure. The optical absorption, temperature/excitation-variable photoluminescence (PL) and PL decay were studied. 1 exhibits a broad emission centered at 577 nm, which is analyzed to be a combination of the emissions from [SbCl6]3- and [SbCl5]2-. The structural effects including SbSb distances and polyhedral distortion of [SbXn]3-n on the PL of antimony-based 0D-OIMHs are discussed in detail. This work would provide guidance for constructing Sb-based 0D OIMHs composed of multiple halometallate species.

Layered Thiostannates with Distinct Arrangements of Mixed Cations for the Selective Capture of Cs+, Sr2+, and Eu3+ Ions.

The selective capture of radioactive cesium, strontium, and lanthanides from liquid nuclear waste is of great significance to environmental remediation and human health. Herein, the rapid and selective removal of Cs+, Sr2+, and Eu3+ ions is achieved by two metal sulfides (FJSM-SnS-2 and FJSM-SnS-3). Both structures feature [Sn3S7]n2n- layers with the mixed cations of [CH3NH3]+ and [Bmmim]+ (1-butyl-2,3-dimethylimidazolium) as templates. However, the ratios and arrangements of mixed cations in the interlayered spaces are distinct. It is unprecedented that [CH3NH3]+ and [Bmmim]+ in FJSM-SnS-2 are alternatingly arranged in different interlayered spaces, whereas they in FJSM-SnS-3 are located in the same interlayered spaces. It is the first time that the ionic liquid cation and protonated organic amine have been simultaneously incorporated into metal sulfides. Both compounds show high capacities, rapid kinetics, and a wide pH active range for Cs+, Sr2+, and Eu3+. Even under excess Na+ ions, both show excellent selectivity in capturing trace Sr2+ and Eu3+ ions. FJSM-SnS-3 presents the highest KdEu to date. They still retain high removal efficiency even after intense ß and γ radiation. Moreover, it is first confirmed by the in situ tracking method of mass spectrometry that the large-sized [Bmmim]+ ions are exchangeable. It is found that the arrangement of cations between interlayered spaces is a crucial factor affecting ion exchange performance. This work will likely change the consensus that large-sized organic cations are difficult to be exchanged and thus further highlight the great potential of metal sulfide ion exchangers for radionuclide remediation.