RESUMO
Calcium carbide residue (CCR) is a waste obtained from the production of acetylene gas by the hydration reaction of calcium carbide. This residue is generated in large quantities annually and requires appropriate disposal. The main composition of the residue is calcium hydroxide (Ca(OH)2). Ca(OH)2 can react with CO2 gas and form CaCO3 particles. This process is well known but not very attractive since Ca(OH)2 is obtained from limestone using an energy-intensive thermal conversion process. This paper examined the synthesis of CaCO3 from CCR solutions by capturing CO2 with the aid of triethanolamine (TEA) solutions at doses of 0, 5, 10 and 20% w/w. The precipitated CaCO3 was characterized, and the application of CaCO3 as a filler in epoxy resin was tested. The results showed that the precipitated CaCO3 was mainly calcite, with a 76.6% yield. Cubic calcite was primarily obtained in TEA solutions, whereas small and agglomerated spherical vaterite and cubic calcite particles were formed in non-TEA solutions. The CaCO3-filled epoxy composites showed higher compressive strength than the neat resin. However, the transparency of specimen plates was reduced. These results can serve as guidelines for the application of CCR slurry filtrate obtained from the sedimentation ponds of acetylene plants and help to reduce the amount of wastewater that needs to be treated. CO2 gas from industrial flue gas combined with TEA solution could be applied to precipitate CaCO3 for carbon-neutral manufacturing.
Assuntos
Carbonato de Cálcio , Dióxido de Carbono , Carbonato de Cálcio/química , Dióxido de Carbono/química , Resinas Epóxi , AcetilenoRESUMO
Building materials with hydrophobic surfaces can exhibit increased service life by preventing moisture absorption or diffusion through their surfaces. For concrete used in construction, this hydrophobicity can prevent the corrosion of reinforcing steel bars. Geopolymers are a new cement-free binding material that have been extensively studied to replace Portland cement. However, similar to normal concrete, geopolymers are susceptible to the intake of moisture. This paper presents the fabrication of a superhydrophobic and self-cleaning surface on a fly ash geopolymer as a method to prevent moisture intake. A composite coating of polydimethylsiloxane (PDMS) solution containing dispersed polytetrafluoroethylene (PTFE) or calcium stearate (CS) microparticles was applied by dip-coating to form the hydrophobic surface. Additionally, fly ash was incorporated with the PTFE and CS microparticles to increase surface roughness and reduce material cost. The experimental results showed that the coating containing CS microparticles yielded a hydrophobic surface with a contact angle of 140°, while those containing PTFE microparticles provided a superhydrophobic surface with a contact angle of 159°. The incorporation of fly ash resulted in increased surface roughness, leading to a larger contact angle and a smaller sliding angle. A contact angle of 153° with a sliding angle of 8.7° was observed on the PTFE/fly ash-coated surface. The cleaning process was demonstrated with a test whereby dust was removed by water droplets rolling off the surface. The tested coating exhibited self-cleaning and waterproofing properties and could thus improve the sustainability of materials in building construction.
Assuntos
Cinza de Carvão , Politetrafluoretileno , Cinza de Carvão/química , Interações Hidrofóbicas e HidrofílicasRESUMO
Geopolymer (GP) was invented to replace concrete, but its heat curing requirement hinders extensive use in real-world construction. Past studies have tested several methods of heat curing. However, the conventional heat curing process (using an oven) is still required for GP to develop good strength on the laboratory scale. This study introduces a new heat curing method for GP based on an electromagnetic field (EMF)generator and a ferromagnetic material. Waste iron powder (WIP) was used as the ferromagnetic material mixed with the fly ash-based GP to generate heat through induction. The sample was cured at 1.18 kW with 150-200 kHz of EMF generator for 15 min. The results showed that 5% of the WIP mixed sample gained compressive and flexural strength at 28 days more than the control (oven-cured). Compressive and flexural strengths of 76.8 MPa and 11.3 MPa were obtained, respectively. In addition, heat induction enhanced the densification and geopolymerization in the GP matrix following SEM and XRD results. This alternative method of heat curing accelerated the formation of the GP matrix, reduced curing time, and increased strength. Moreover, this EMF curing method can save 99.70% of the energy consumed compared to the conventional heat curing method.
RESUMO
The worldwide demand for roads to serve global economic growth has led to the increasing popularity of road improvement using cement. This, in turn, has led to increased demand for cement and the associated problem of CO2 emissions. Alkaline-activated materials (AAMs) could be an alternative binder for relatively low strength construction and rehabilitation as a cement replacement material. Compared to other applications, the lower strength requirements of road construction materials could ease any difficulties with AAM production. In this study, crushed rock (CR) was used as a prime raw material. The mechanisms and microstructures of the hardened AAM were investigated along with its mechanical properties. The results showed that CR-based AAM with an optimum mixture of 5 M of NaOH concentration, an SS/SH ratio of 1.00, and a liquid alkaline-to-binder (L/B) ratio of 0.5 could be used for roadway applications. At this ratio, the paste samples cured at room temperature (26 ± 3 °C) had an early compressive strength (3 days-age) of 3.82 MPa, while the paste samples cured at 60 °C had an early compressive strength of 6.45 MPa. The targeted strength results were able to be applied to a cement-treated base (CTB) for pavement and roadway applications (2.1 to 5.5 MPa).
RESUMO
Raw water is a significant resource for industrial water usage, but this water is not directly suitable for use due to the presence of contaminants. Therefore, pre-treatment is essential. The treatment generates water treatment residue (WTR) which consists of silt, clay and undesirable components. Most WTR is conventionally disposed of in landfill. In addition, the presence of iron (Fe) and manganese (Mn) in groundwater can result in a reddish-brown color and undesirable taste and odour. A number of expensive and complex technologies are being used for the removal of such iron and manganese. Due to the high Al2O3 and SiO2 content in WTR, therefore, this research proposes the use of WTR as the source material for geopolymer production for Fe/Mn removal. With the availability of free alkali in the geopolymer framework, the OH--releasing behavior of the WTR-based geopolymer was investigated by the precipitation of Fe(II) ion. The WTR-based geopolymer was calcined at 400 °C and 600 °C to obtain a strong geopolymer matrix with the ability to remove Fe/Mn ions. The results show that the WTR-based geopolymer has the potential to remove Fe from Fe-contaminated water. Hydroxide ions are released from the geopolymer and form an Fe(OH)3 precipitate. Geopolymer with a calcination temperature of 400 °C provides total removal of the Fe after 24 h of immersion. In addition, the existence of Fe(OH)3 helps to coprecipitate the Mn(OH)2 in the Fe/Mn solution leading to a significant reduction of Mn from the solution. The pH value and retention time play an important role in the final metal concentration. The final pH of the solution is close to 8.5, which is the recommended value for boiler water. This method offers an alternative use of WTR in making a porous geopolymer for groundwater Fe/Mn removal using a simple method.
Assuntos
Água Subterrânea , Purificação da Água , Íons , Ferro/análise , Manganês/análise , Porosidade , Dióxido de SilícioRESUMO
Supplementary cementitious materials have been widely used to reduce the greenhouse gas emissions caused by ordinary Portland cement (OPC), including in the construction of road bases. In addition, the use of OPC in road base stabilization is inefficient due to its moisture sensitivity and lack of flexibility. Therefore, this study investigates the effect of hybrid alkali-activated materials (H-AAM) on flexibility and water prevention when used as binders while proposing a new and sustainable material. A cationic asphalt emulsion (CAE) was applied to increase this cementless material's resistance to moisture damage and flexibility. The physical properties and structural formation of this H-AAM, consisting of fly ash, hydrated lime, and sodium hydroxide, were examined. The results revealed that the addition of CAE decreased the material's mechanical strength due to its hindrance of pozzolanic reactions and alkali activations. This study revealed decreases in the cementitious product's peak in the x-ray diffraction analysis (XRD) tests and the number of tetrahedrons detected in the Fourier transform infrared spectroscopy analysis (FTIR) tests. The scanning electron microscope (SEM) images showed some signs of asphalt films surrounding hybrid alkali-activated particles and even some unreacted FA particles, indicating incomplete chemical reactions in the study material's matrix. However, the H-AAM was still able to meet the minimum road base strength requirement of 1.72 MPa. Furthermore, the toughness and flexibility of the H-AAM were enhanced by CAE. Notably, adding 10% and 20% CAE by weight to the hybrid alkali-activated binder produced a significant advantage in terms of water absorption, which can be explained by its influence on the material's consolidation of its matrices, resulting in significant void reductions. Hence, the outcomes of this study might reveal an opportunity for developing a new stabilizing agent for road bases with water-prevention properties and flexibility that remains faithful to the green construction material concept.
RESUMO
Spatial susceptible landslide prediction is the one of the most challenging research areas which essentially concerns the safety of inhabitants. The novel geographic information web (GIW) application is proposed for dynamically predicting landslide risk in Chiang Rai, Thailand. The automated GIW system is coordinated between machine learning technologies, web technologies, and application programming interfaces (APIs). The new bidirectional long short-term memory (Bi-LSTM) algorithm is presented to forecast landslides. The proposed algorithm consists of 3 major steps, the first of which is the construction of a landslide dataset by using Quantum GIS (QGIS). The second step is to generate the landslide-risk model based on machine learning approaches. Finally, the automated landslide-risk visualization illustrates the likelihood of landslide via Google Maps on the website. Four static factors are considered for landslide-risk prediction, namely, land cover, soil properties, elevation and slope, and a single dynamic factor i.e., precipitation. Data are collected to construct a geospatial landslide database which comprises three historical landslide locations-Phu Chifa at Thoeng District, Ban Pha Duea at Mae Salong Nai, and Mai Salong Nok in Mae Fa Luang District, Chiang Rai, Thailand. Data collection is achieved using QGIS software to interpolate contour, elevation, slope degree and land cover from the Google satellite images, aerial and site survey photographs while the physiographic and rock type are on-site surveyed by experts. The state-of-the-art machine learning models have been trained i.e., linear regression (LR), artificial neural network (ANN), LSTM, and Bi-LSTM. Ablation studies have been conducted to determine the optimal parameters setting for each model. An enhancement method based on two-stage classifications has been presented to improve the landslide prediction of LSTM and Bi-LSTM models. The landslide-risk prediction performances of these models are subsequently evaluated using real-time dataset and it is shown that Bi-LSTM with Random Forest (Bi-LSTM-RF) yields the best prediction performance. Bi-LSTM-RF model has improved the landslide-risk predicting performance over LR, ANNs, LSTM, and Bi-LSTM in terms of the area under the receiver characteristic operator (AUC) scores by 0.42, 0.27, 0.46, and 0.47, respectively. Finally, an automated web GIS has been developed and it consists of software components including the trained models, rainfall API, Google API, and geodatabase. All components have been interfaced together via JavaScript and Node.js tool.
Assuntos
Deslizamentos de Terra , Sistemas de Informação Geográfica , Aprendizado de Máquina , Redes Neurais de Computação , TailândiaRESUMO
Geopolymer (GP) has been applied as an environmentally-friendly construction material in recent years. Many pozzolanic wastes, such as fly ash (FA) and bottom ash, are commonly used as source materials for synthesizing geopolymer. Nonetheless, many non-pozzolanic wastes are often applied in the field of civil engineering, including waste iron powder (WIP). WIPs are massively produced as by-products from iron and steel industries, and the production rate increases every year. As an iron-based material, WIP has properties of heat induction and restoration, which can enhance the heat curing process of GP. Therefore, this study aimed to utilize WIP in high-calcium FA geopolymer to develop a new type of geopolymer and examine its properties compared to the conventional geopolymer. Scanning electron microscopy and X-ray diffraction were performed on the geopolymers. Mechanical properties, including compressive strength and flexural strength, were also determined. In addition, setting time and temperature monitoring during the heat curing process were carried out. The results indicated that the addition of WIP in FA geopolymer decreased the compressive strength, owing to the formation of tetrahydroxoferrate (II) sodium or Na2[Fe(OH)4]. However, a significant increase in the flexural strength of GP with WIP addition was detected. A flexural strength of 8.5 MPa was achieved by a 28-day sample with 20% of WIP addition, nearly three times higher than that of control.
RESUMO
The alkali-silica reaction (ASR) is an important consideration in ensuring the long-term durability of concrete materials, especially for those containing reactive aggregates. Although fly ash (FA) has proven to be useful in preventing ASR expansion, the filler effect and the effect of FA fineness on ASR expansion are not well defined in the present literature. Hence, this study aimed to examine the effects of the filler and fineness of FA on ASR mortar expansion. FAs with two different finenesses were used to substitute ordinary Portland cement (OPC) at 20% by weight of binder. River sand (RS) with the same fineness as the FA was also used to replace OPC at the same rate as FA. The replacement of OPC with RS (an inert material) was carried out to observe the filler effect of FA on ASR. The results showed that FA and RS provided lower ASR expansions compared with the control mortar. Fine and coarse fly ashes in this study had almost the same effectiveness in mitigating the ASR expansion of the mortars. For the filler effect, smaller particles of RS had more influence on the ASR reduction than RS with coarser particles. A significant mitigation of the ASR expansion was obtained by decreasing the OPC content in the mortar mixture through its partial substitution with FA and RS.
RESUMO
With a lack of standard lateritic soil for use in road construction, suitable economical and sustainable soil-stabilization techniques are in demand. This study aimed to examine flue gas desulfurization (FGD) gypsum, a by-product of coal power plants, for use in soil-cement stabilization, specifically for ability to strengthen poor high-clay, lateritic soil but with a lower cement content. A series of compaction tests and unconfined compressive strength (UCS) tests were performed in conjunction with scanning electron microscope (SEM) analyses. Therefore, the strength development and the role of FGD gypsum in the soil-cement-FGD gypsum mixtures with varying cement and FGD gypsum contents were characterized in this study. The study results showed that adding FGD gypsum can enhance the strength of the stabilized substandard lateritic soil. Extra FGD gypsum added to the cement hydration system provided more sulfate ions, leading to the formation of ettringite and monosulfate, which are the hardening cementitious products from the cement hydration reaction. Both products contributed to the strength gain of the soil-cement-FGD gypsum material. However, the strength can be reduced when too much FGD gypsum is added because the undissolved gypsum has a weak structure. Examinations of FGD gypsum in the soil-cement-FGD gypsum mixtures by SEM confirmed that adding FGD gypsum can reduce the cement content in a soil-cement mix to achieve a given UCS value.
RESUMO
This research evaluated the feasibility of using vetiver plantlets (Vetiveria zizanioides (L.) Nash) on a floating platform with aeration to degrade phenol (500 mg/L) in illegally dumped industrial wastewater (IDIWW). The IDIWW sample was from the most infamous illegal dumping site at Nong Nae subdistrict, Phanom Sarakham district, Chachoengsao province, Thailand. Laboratory results suggested that phenol degradation by vetiver involves two phases: Phase I, phytopolymerization and phyto-oxidation assisted by root-produced peroxide (H2O2) and peroxidase (POD), followed by phase II, a combination of phase I with enhanced rhizomicrobial degradation. The first 360-400 h of phenol degradation were dominated by phytopolymerization and phyto-oxidation yielding particulate polyphenols (PPP) or particulate organic matter (POM) as by-products, while phenol decreased to around 145 mg/L. In Phase II, synergistically, rhizomicrobial growth was â¼100-folds greater on the roots of the vetiver plantlets than in the IDIWW and participated in the microbial degradation of phenol at this lower phenol concentration, increasing the phenol degradation rate by more than three folds. This combination of phytochemical and rhizomicrobiological processes eliminated phenol in IDIWW in less than 766 h (32 days), while without the vetiver plantlets, phenol degradation by aerated microbial degradation alone may require 235 days. To our knowledge, this is the first that systematically reveals the complete phenol degradation mechanism by vetiver plantlets in real aerated wastewater.