Higher productivity in forests with mixed mycorrhizal strategies.

Decades of theory and empirical studies have demonstrated links between biodiversity and ecosystem functioning, yet the putative processes that underlie these patterns remain elusive. This is especially true for forest ecosystems, where the functional traits of plant species are challenging to quantify. We analyzed 74,563 forest inventory plots that span 35 ecoregions in the contiguous USA and found that in ~77% of the ecoregions mixed mycorrhizal plots were more productive than plots where either arbuscular or ectomycorrhizal fungal-associated tree species were dominant. Moreover, the positive effects of mixing mycorrhizal strategies on forest productivity were more pronounced at low than high tree species richness. We conclude that at low richness different mycorrhizal strategies may allow tree species to partition nutrient uptake and thus can increase community productivity, whereas at high richness other dimensions of functional diversity can enhance resource partitioning and community productivity. Our findings highlight the importance of mixed mycorrhizal strategies, in addition to that of taxonomic diversity in general, for maintaining ecosystem functioning in forests.

Woody invaders are more highly colonized by arbuscular mycorrhizal fungi than congeneric native species.

PREMISE: Invasive species tend to possess acquisitive plant traits that support fast growth and strong competitive ability. However, the relevance of symbioses with arbuscular mycorrhizal fungi (AMF) to the fast growing, acquisitive strategy of invasive species is still unclear. METHODS: We measured AMF colonization in roots of five congeneric pairs of invasive and native eastern North American woody species (10 species total; 4 lianas, 6 shrubs) that were grown in a monoculture common garden experiment in Syracuse, NY. We then examined the relationships of AMF colonization to above and belowground traits of these species. RESULTS: Total AMF colonization and arbuscule colonization were greater in invasive compared to native woody species, a pattern that was more distinct in congeneric shrubs than congeneric lianas. The level of AMF colonization was also positively correlated with traits indicative of rapid plant growth and nutrient uptake. CONCLUSIONS: The concordance of a resource-acquisitive strategy with higher AMF colonization suggests that symbioses with AMF may be part of the strategy by which invasive woody plants of eastern North America are able to maintain fast growth rates and outcompete their native counterparts.

Coupling of plant and mycorrhizal fungal diversity: its occurrence, relevance, and possible implications under global change.

First principles predict that diversity at one trophic level often begets diversity at other levels, suggesting plant and mycorrhizal fungal diversity should be coupled. Local-scale studies have shown positive coupling between the two, but the association is less consistent when extended to larger spatial and temporal scales. These inconsistencies are likely due to divergent relationships of different mycorrhizal fungal guilds to plant diversity, scale dependency, and a lack of coordinated sampling efforts. Given that mycorrhizal fungi play a central role in plant productivity and nutrient cycling, as well as ecosystem responses to global change, an improved understanding of the coupling between plant and mycorrhizal fungal diversity across scales will reduce uncertainties in predicting the ecosystem consequences of species gains and losses.

Fast but steady: An integrated leaf-stem-root trait syndrome for woody forest invaders.

Successful control and prevention of biological invasions depend on identifying traits of non-native species that promote fitness advantages in competition with native species. Here, we show that, among 76 native and non-native woody plants of deciduous forests of North America, invaders express a unique functional syndrome that combines high metabolic rate with robust leaves of longer lifespan and a greater duration of annual carbon gain, behaviours enabled by seasonally plastic xylem structure and rapid production of thin roots. This trait combination was absent in all native species examined and suggests the success of forest invaders is driven by a novel resource-use strategy. Furthermore, two traits alone-annual leaf duration and nuclear DNA content-separated native and invasive species with 93% accuracy, supporting the use of functional traits in invader risk assessments. A trait syndrome reflecting both fast growth capacity and understorey persistence may be a key driver of forest invasions.

Shifts in dominant tree mycorrhizal associations in response to anthropogenic impacts.

Plant-fungal symbioses play critical roles in vegetation dynamics and nutrient cycling, modulating the impacts of global changes on ecosystem functioning. Here, we used forest inventory data consisting of more than 3 million trees to develop a spatially resolved "mycorrhizal tree map" of the contiguous United States. We show that abundances of the two dominant mycorrhizal tree groups-arbuscular mycorrhizal (AM) and ectomycorrhizal trees-are associated primarily with climate. Further, we show that anthropogenic influences, primarily nitrogen (N) deposition and fire suppression, in concert with climate change, have increased AM tree dominance during the past three decades in the eastern United States. Given that most AM-dominated forests in this region are underlain by soils with high N availability, our results suggest that the increasing abundance of AM trees has the potential to induce nutrient acceleration, with critical consequences for forest productivity, ecosystem carbon and nutrient retention, and feedbacks to climate change.

Microbial mechanisms and ecosystem flux estimation for aerobic NOy emissions from deciduous forest soils.

Reactive nitrogen oxides (NOy; NOy = NO + NO2 + HONO) decrease air quality and impact radiative forcing, yet the factors responsible for their emission from nonpoint sources (i.e., soils) remain poorly understood. We investigated the factors that control the production of aerobic NOy in forest soils using molecular techniques, process-based assays, and inhibitor experiments. We subsequently used these data to identify hotspots for gas emissions across forests of the eastern United States. Here, we show that nitrogen oxide soil emissions are mediated by microbial community structure (e.g., ammonium oxidizer abundances), soil chemical characteristics (pH and C:N), and nitrogen (N) transformation rates (net nitrification). We find that, while nitrification rates are controlled primarily by chemoautotrophic ammonia-oxidizing archaea (AOA), the production of NOy is mediated in large part by chemoautotrophic ammonia-oxidizing bacteria (AOB). Variation in nitrification rates and nitrogen oxide emissions tracked variation in forest communities, as stands dominated by arbuscular mycorrhizal (AM) trees had greater N transformation rates and NOy fluxes than stands dominated by ectomycorrhizal (ECM) trees. Given mapped distributions of AM and ECM trees from 78,000 forest inventory plots, we estimate that broadleaf forests of the Midwest and the eastern United States as well as the Mississippi River corridor may be considered hotspots of biogenic NOy emissions. Together, our results greatly improve our understanding of NOy fluxes from forests, which should lead to improved predictions about the atmospheric consequences of tree species shifts owing to land management and climate change.

Impacts of climate on the biodiversity-productivity relationship in natural forests.

Understanding biodiversity-productivity relationships (BPRs) is of theoretical importance, and has important management implications. Most work on BPRs has focused on simple and/or experimentally assembled communities, and it is unclear how these observed BPRs can be extended to complex natural forest ecosystems. Using data from over 115,000 forest plots across the contiguous United States, we show that the bivariate BPRs are positive in dry climates and hump-shaped in mesic climates. When considering other site characteristics, BPRs change to neutral in dry climates and remain hump-shaped in humid sites. Our results indicate that climatic variation is an underlying determinant of contrasting BPRs observed across a large spatial extent, while both biotic factors (e.g., stand age and density) and abiotic factors (e.g., soil properties) can impact BPRs within a given climate unit. These findings suggest that tradeoffs need be made when considering whether to maximize productivity vs. conserve biodiversity, especially in mesic climates.

Dominant forest tree mycorrhizal type mediates understory plant invasions.

Forest mycorrhizal type mediates nutrient dynamics, which in turn can influence forest community structure and processes. Using forest inventory data, we explored how dominant forest tree mycorrhizal type affects understory plant invasions with consideration of forest structure and soil properties. We found that arbuscular mycorrhizal (AM) dominant forests, which are characterised by thin forest floors and low soil C : N ratio, were invaded to a greater extent by non-native invasive species than ectomycorrhizal (ECM) dominant forests. Understory native species cover and richness had no strong associations with AM tree dominance. We also found no difference in the mycorrhizal type composition of understory invaders between AM and ECM dominant forests. Our results indicate that dominant forest tree mycorrhizal type is closely linked with understory invasions. The increased invader abundance in AM dominant forests can further facilitate nutrient cycling, leading to the alteration of ecosystem structure and functions.

Divergence of species responses to climate change.

Climate change can have profound impacts on biodiversity and the sustainability of many ecosystems. Various studies have investigated the impacts of climate change, but large-scale, trait-specific impacts are less understood. We analyze abundance data over time for 86 tree species/groups across the eastern United States spanning the last three decades. We show that more tree species have experienced a westward shift (73%) than a poleward shift (62%) in their abundance, a trend that is stronger for saplings than adult trees. The observed shifts are primarily due to the changes of subpopulation abundances in the leading edges and are significantly associated with changes in moisture availability and successional processes. These spatial shifts are associated with species that have similar traits (drought tolerance, wood density, and seed weight) and evolutionary histories (most angiosperms shifted westward and most gymnosperms shifted poleward). Our results indicate that changes in moisture availability have stronger near-term impacts on vegetation dynamics than changes in temperature. The divergent responses to climate change by trait- and phylogenetic-specific groups could lead to changes in composition of forest ecosystems, putting the resilience and sustainability of various forest ecosystems in question.

Multiscale Modulation of Nanocrystalline Cellulose Hydrogel via Nanocarbon Hybridization for 3D Neuronal Bilayer Formation.

Bacterial biopolymers have drawn much attention owing to their unconventional three-dimensional structures and interesting functions, which are closely integrated with bacterial physiology. The nongenetic modulation of bacterial (Acetobacter xylinum) cellulose synthesis via nanocarbon hybridization, and its application to the emulation of layered neuronal tissue, is reported. The controlled dispersion of graphene oxide (GO) nanoflakes into bacterial cellulose (BC) culture media not only induces structural changes within a crystalline cellulose nanofibril, but also modulates their 3D collective association, leading to substantial reduction in Young's modulus (≈50%) and clear definition of water-hydrogel interfaces. Furthermore, real-time investigation of 3D neuronal networks constructed in this GO-incorporated BC hydrogel with broken chiral nematic ordering revealed the vertical locomotion of growth cones, the accelerated neurite outgrowth (≈100 µm per day) with reduced backward travel length, and the efficient formation of synaptic connectivity with distinct axonal bifurcation abundancy at the ≈750 µm outgrowth from a cell body. In comparison with the pristine BC, GO-BC supports the formation of well-defined neuronal bilayer networks with flattened interfacial profiles and vertical axonal outgrowth, apparently emulating the neuronal development in vivo. We envisioned that our findings may contribute to various applications of engineered BC hydrogel to fundamental neurobiology studies and neural engineering.

Smart Contact Lenses with Graphene Coating for Electromagnetic Interference Shielding and Dehydration Protection.

Recently, smart contact lenses with electronic circuits have been proposed for various sensor and display applications where the use of flexible and biologically stable electrode materials is essential. Graphene is an atomically thin carbon material with a two-dimensional hexagonal lattice that shows outstanding electrical and mechanical properties as well as excellent biocompatibility. In addition, graphene is capable of protecting eyes from electromagnectic (EM) waves that may cause eye diseases such as cataracts. Here, we report a graphene-based highly conducting contact lens platform that reduces the exposure to EM waves and dehydration. The sheet resistance of the graphene on the contact lens is as low as 593 Ω/sq (±9.3%), which persists in an wet environment. The EM wave shielding function of the graphene-coated contact lens was tested on egg whites exposed to strong EM waves inside a microwave oven. The results show that the EM energy is absorbed by graphene and dissipated in the form of thermal radiation so that the damage on the egg whites can be minimized. We also demonstrated the enhanced dehydration protection effect of the graphene-coated lens by monitoring the change in water evaporation rate from the vial capped with the contact lens. Thus, we believe that the graphene-coated contact lens would provide a healthcare and bionic platform for wearable technologies in the future.

Double-Layer Graphene Outperforming Monolayer as Catalyst on Silicon Photocathode for Hydrogen Production.

Photoelectrochemical cells are used to split hydrogen and oxygen from water molecules to generate chemical fuels to satisfy our ever-increasing energy demands. However, it is a major challenge to design efficient catalysts to use in the photoelectochemical process. Recently, research has focused on carbon-based catalysts, as they are nonprecious and environmentally benign. Interesting advances have also been made in controlling nanostructure interfaces and in introducing new materials as catalysts in the photoelectrochemical cell. However, these catalysts have as yet unresolved issues involving kinetics and light-transmittance. In this work, we introduce high-transmittance graphene onto a planar p-Si photocathode to produce a hydrogen evolution reaction to dramatically enhance photon-to-current efficiency. Interestingly, double-layer graphene/Si exhibits noticeably improved photon-to-current efficiency and modifies the band structure of the graphene/Si photocathode. On the basis of in-depth electrochemical and electrical analyses, the band structure of graphene/Si was shown to result in a much lower work function than Si, accelerating the electron-to-hydrogen production potential. Specifically, plasma-treated double-layer graphene exhibited the best performance and the lowest work function. We electrochemically analyzed the mechanism at work in the graphene-assisted photoelectrode. Atomistic calculations based on the density functional theory were also carried out to more fully understand our experimental observations. We believe that investigation of the underlying mechanism in this high-performance electrode is an important contribution to efforts to develop high-efficiency metal-free carbon-based catalysts for photoelectrochemical cell hydrogen production.

Strain Relaxation of Graphene Layers by Cu Surface Roughening.

The surface morphology of copper (Cu) often changes after the synthesis of graphene by chemical vapor deposition (CVD) on a Cu foil, which affects the electrical properties of graphene, as the Cu step bunches induce the periodic ripples on graphene that significantly disturb electrical conduction. However, the origin of the Cu surface reconstruction has not been completely understood yet. Here, we show that the compressive strain on graphene induced by the mismatch of thermal expansion coefficient with Cu surface can be released by forming periodic Cu step bunching that depends on graphene layers. Atomic force microscopy (AFM) images and the Raman analysis show the noticeably longer and higher step bunching of Cu surface under multilayer graphene and the weaker biaxial compressive strain on multilayer graphene compared to monolayer. We found that the surface areas of Cu step bunches under multilayer and monolayer graphene are increased by ∼1.41% and ∼0.77% compared to a flat surface, respectively, indicating that the compressive strain on multilayer graphene can be more effectively released by forming the Cu step bunching with larger area and longer periodicity. We believe that our finding on the strain relaxation of graphene layers by Cu step bunching formation would provide a crucial idea to enhance the electrical performance of graphene electrodes by controlling the ripple density of graphene.

Controlling the ripple density and heights: a new way to improve the electrical performance of CVD-grown graphene.

We report a new way to enhance the electrical performances of large area CVD-grown graphene through controlling the ripple density and heights after transfer onto SiO2/Si substrates by employing different cooling rates during fabrication. We find that graphene films prepared with a high cooling rate have reduced ripple density and heights and improved electrical characteristics such as higher electron/hole mobilities as well as reduced sheet resistance. The corresponding Raman analysis also shows a significant decrease of the defects when a higher cooling rate is employed. We suggest a model that explains the improved morphology of the graphene film obtained with higher cooling rates. From these points of view, we can suggest a new pathway toward a relatively lower density and heights of ripples in order to reduce the flexural phonon-electron scattering effect, leading to higher lateral carrier mobilities.

Correction: Graphene-catalyzed photoreduction of dye molecules revealed by graphene enhanced Raman spectroscopy.

Correction for 'Graphene-catalyzed photoreduction of dye molecules revealed by graphene enhanced Raman spectroscopy' by Bora Lee et al., Phys. Chem. Chem. Phys., 2016, 18, 3413-3415.

Graphene-catalyzed photoreduction of dye molecules revealed by graphene enhanced Raman spectroscopy.

The unique electrical and optical properties of graphene have enabled its application in various photocatalysis reactions. However, graphene needs to be combined with photosensitizing co-catalysts such as TiO2 due to its negligible visible light absorption. Here, we report that the single layer graphene by itself is capable of catalyzing the photoreduction of dye molecules, which has been revealed by graphene-enhanced Raman spectroscopy studies. The proposed mechanism involves the electron transfer from graphene to temporarily empty HOMO states of photoexcited dye molecules, which can be interpreted as ultrafast hole transfer from dyes to graphene. We also confirm that graphene-encapsulated nitrobenzene dyes show less photoreduction, implying that the ambient hydrogen molecules are the important source of photoreduction into aniline dyes. The photocatalytic reactivity of graphene would find numerous energy and environmental applications in the future.

More of the same? In situ leaf and root decomposition rates do not vary between 80 native and nonnative deciduous forest species.

Invaders often have greater rates of production and produce more labile litter than natives. The increased litter quantity and quality of invaders should increase nutrient cycling through faster litter decomposition. However, the limited number of invasive species that have been included in decomposition studies has hindered the ability to generalize their impacts on decomposition rates. Further, previous decomposition studies have neglected roots. We measured litter traits and decomposition rates of leaves for 42 native and 36 nonnative woody species, and those of fine roots for 23 native and 25 nonnative species that occur in temperate deciduous forests throughout the Eastern USA. Among the leaf and root traits that differed between native and invasive species, only leaf nitrogen was significantly associated with decomposition rate. However, native and nonnative species did not differ systematically in leaf and root decomposition rates. We found that among the parameters measured, litter decomposer activity was driven by litter chemical quality rather than tissue density and structure. Our results indicate that litter decomposition rate per se is not a pathway by which forest woody invasive species affect North American temperate forest soil carbon and nutrient processes.

Stable n-type doping of graphene via high-molecular-weight ethylene amines.

We demonstrate a stable and strong n-type doping method to tune the electrical properties of graphene via vapor phase chemical doping with various high-molecular-weight ethylene amines. The resulting carrier concentration after doping with pentaethylenehexamine (PEHA) is as high as -1.01 × 10(13) cm(-2), which reduces the sheet resistance of graphene by up to ∼400% compared to pristine graphene. Our study suggests that the branched structure of the dopant molecules is another important factor that determines the actual doping degree of graphene.

An electrochemical approach to graphene oxide coated sulfur for long cycle life.

Owing to the possibilities of achieving high theoretical energy density and gravimetric capacity, sulfur has been considered as a promising cathode material for rechargeable lithium batteries. However, sulfur shows rapid capacity fading due to the irreversible loss of soluble polysulfides and the decrease in active sites needed for conducting agents. Furthermore, the low electrical conductivity of sulfur hampers the full utilization of active materials. Here we report that graphene oxide coated sulfur composites (GO-S/CB) exhibit improved electrochemical stability as well as enhanced rate performance, evidenced by various electrochemical analyses. The cyclic voltammetry and the galvanostatic cycling analysis revealed that the GO plays key roles in homogenizing the nanocomposite structures of the electrodes, in improving the electrochemical contact, and in minimizing the loss of soluble polysulfide intermediates. An electrochemical impedance spectroscopy analysis also confirms the enhanced structural stability of the GO-S/CB composites after battery operation. As a result, the GO-S/CB exhibited excellent cycle stability and specific capacity as high as ∼723.7 mA h g(-1) even after 100 cycles at 0.5 C.

In situ hybridization of carbon nanotubes with bacterial cellulose for three-dimensional hybrid bioscaffolds.

Carbon nanotubes (CNTs) have shown great potential in biomedical fields. However, in vivo applications of CNTs for regenerative medicine have been hampered by difficulties associated with the fabrication of three-dimensional (3D) scaffolds of CNTs due to CNTs' nano-scale nature. In this study, we devised a new method for biosynthesis of CNT-based 3D scaffold by in situ hybridizing CNTs with bacterial cellulose (BC), which has a structure ideal for tissue-engineering scaffolds. This was achieved simply by culturing Gluconacetobacter xylinus, BC-synthesizing bacteria, in medium containing CNTs. However, pristine CNTs aggregated in medium, which hampers homogeneous hybridization of CNTs with BC scaffolds, and the binding energy between hydrophobic pristine CNTs and hydrophilic BC was too small for the hybridization to occur. To overcome these problems, an amphiphilic comb-like polymer (APCLP) was adsorbed on CNTs. Unlike CNT-coated BC scaffolds (CNT-BC-Imm) formed by immersing 3D BC scaffolds in CNT solution, the APCLP-adsorbed CNT-BC hybrid scaffold (CNT-BC-Syn) showed homogeneously distributed CNTs throughout the 3D microporous structure of BC. Importantly, in contrast to CNT-BC-Imm scaffolds, CNT-BC-Syn scaffolds showed excellent osteoconductivity and osteoinductivity that led to high bone regeneration efficacy. This strategy may open a new avenue for development of 3D biofunctional scaffolds for regenerative medicine.