Amplified seasonality in western Europe in a warmer world.

Documenting the seasonal temperature cycle constitutes an essential step toward mitigating risks associated with extreme weather events in a future warmer world. The mid-Piacenzian Warm Period (mPWP), 3.3 to 3.0 million years ago, featured global temperatures approximately 3°C above preindustrial levels. It represents an ideal period for directed paleoclimate reconstructions equivalent to model projections for 2100 under moderate Shared Socioeconomic Pathway SSP2-4.5. Here, seasonal clumped isotope analyses of fossil mollusk shells from the North Sea are presented to test Pliocene Model Intercomparison Project 2 outcomes. Joint data and model evidence reveals enhanced summer warming (+4.3° ± 1.0°C) compared to winter (+2.5° ± 1.5°C) during the mPWP, equivalent to SSP2-4.5 outcomes for future climate. We show that Arctic amplification of global warming weakens mid-latitude summer circulation while intensifying seasonal contrast in temperature and precipitation, leading to an increased risk of summer heat waves and other extreme weather events in Europe's future.

From alkaline earth to coinage metal carboranyls.

The ß-diketiminato calcium and magnesium complexes, [(BDI)MgnBu] and [(BDI)CaH]2 (BDI = HC{C(Me)NDipp}2; Dipp = 2,6-di-isopropylphenyl), react with ortho-carborane (o-C2B10H12) to provide the respective [(BDI)Ae(o-C2B10H11)] (Ae = Mg or Ca) complexes. While the lighter group 2 species is a monomer with magnesium in a distorted trigonal planar environment, the heavier analogue displays a puckered geometry at calcium in the solid state due to Ca⋯H-B intermolecular interactions. These secondary contacts are, however, readily disrupted upon addition of THF to provide the 4-coordinate monomer, [(BDI)Ca(THF)(o-C2B10H11)]. [(BDI)Mg(o-C2B10H11)] was reacted with [NHCIPrMCl] (NHCIPr = 1,3-bis(isopropyl)imidazol-2-ylidene; M = Cu, Ag, Au) to provide [NHCIPrM(o-C2B10H11)], rare C-bonded examples of coinage metal derivatives of unsubstituted (o-C2B10H11)- and confirming the alkaline earth compounds as viable reagents for the transmetalation of the carboranyl anion.

Green Alternatives to Zinc Dialkyldithiophosphates: Vanadium Oxide-Based Additives.

A functionalized vanadyl(IV) acetylacetonate (acac) complex has been found to be a superior and highly effective antiwear agent, affording remarkable wear protection, compared to the current industry standard, zinc dialkyldithiophosphates (ZDDPs). Analysis of vanadium speciation and the depth profile of the active tribofilms by a combination of X-ray absorption near-edge structure (XANES), X-ray photoelectron spectroscopy (XPS), and near-edge X-ray absorption fine structure (NEXAFS) analyses indicated a mixed-valence oxide composite, comprising V(III), V(IV), and V(V) species. A marked difference in composition between the bulk and the surfaces of the tribofilms was found. The vanadyl(VI) acac precursor has the potential to reduce or even replace ZDDP, which would represent a paradigm shift in the antiwear agent design. A major benefit relative to ZDDPs is the absence of S and P moieties, eliminating the potential for forming noxious and environmentally harmful byproducts of these elements.

Exploration of Solid-State vs Solution-State Structure in Contact Ion Pair Systems: Synthesis, Characterization, and Solution-State Dynamics of Zinc Diphenyl Phosphate, [Zn{O2P(OPh)2}2], Donor-Base-Supported Complexes.

A family of zinc phosphate complexes supported by nitrogen donor-base ligands have been synthesized, and their molecular structures were identified in both the solid (X-ray crystallography) and solution state (DOSY NMR spectroscopy). [Zn{O2P(OPh)2}2]∞ (1), formed from the reaction of Zn[N(SiMe3)2]2 with HO(O)P(OPh)2 coordinates to donor-base ligands, i.e., pyridine (Py), 4-methylpyridine (4-MePy), 2,2-bipyridine (bipy), tetramethylethylenediamine (TMEDA), pentamethyldiethylenetriamine (PMDETA), and 1,3,5-trimethyl-1,3,5-triazacyclohexane (Me3-TAC), to produce polymeric 1D structures, [(Py)2Zn{O2P(OPh)2}2]∞ (2) and [(4-MePy)2Zn{O2P(OPh)2}2]∞ (3), the bimetalic systems, [(Bipy)Zn{O2P(OPh)2}2]2 (4), [(TMEDA)Zn{O2P(OPh)2}2]2 (5), and [(Me3-TAC)Zn{O2P(OPh)2}2]2 (7), as well as a mono-nuclear zinc bis-diphenylphosphate complex, [(PMDETA)Zn{O2P(OPh)2}2] (6). 1H NMR DOSY has been used to calculate averaged molecular weights of the species. Studies are consistent with the disassembly of polymeric 3 into the bimetallic species [(Me-Py)2·Zn2{O2P(OPh)2}4], where the Me-Py ligand is in rapid exchange with free Me-Py in solution. Further 1H DOSY NMR studies of 4 and 5 reveal that dissolution of the complex results in a monomer dimer equilibrium, i.e., [(Bipy)Zn{O2P(OPh)2}2]2 ⇆ 2[(Bipy)Zn{O2P(OPh)2}2] and [(TMEDA)Zn{O2P(OPh)2}2]2 ⇆ 2[(TMEDA)Zn{O2P(OPh)2}2], respectively, in which the equilibria lie toward formation of the monomer. As part of our studies, variable temperature 1H DOSY experiments (223 to 313 K) were performed upon 5 in d8-tol, which allowed us to approximate the enthalpy [ΔH = -43.2 kJ mol-1 (±3.79)], entropy [ΔS = 109 J mol-1 K-1 (±13.9)], and approximate Gibbs free energy [ΔG = 75.6 kJ mol-1 (±5.62) at 293 K)] of monomer-dimer equilibria. While complex 6 is shown to maintain its monomeric solid-state structure, 1H DOSY experiments of 7 at 298 K reveal two separate normalized diffusion coefficients consistent with the presence of the bimetallic species [(TAC)2-xZn2{O2P(OPh)2}4], (x = 1 or 0) and free TAC ligand.

Lithium, Tin(II), and Zinc Amino-Boryloxy Complexes: Synthesis and Characterization.

Analogous to the ubiquitous alkoxide ligand, metal boroxide and boryloxy complexes are an underexplored class of hard anionic O- ligand. A new series of amine-stabilized Li, Sn(II), and Zn boryloxy complexes, comprising electron-rich tetrahedral boron centers have been synthesized and characterized. All complexes have been characterized by one-dimensional (1D), two-dimensional (2D), and DOSY NMR, which are consistent with the solid-state structures unambiguously determined via single-crystal X-ray diffraction. Electron-rich µ2- (Sn and Zn) and µ3- (Li) boryloxy binding modes are observed. Compounds 6-9 are the first complexes of this class, with the chelating bis- and tris-phenol ligands providing a scaffold that can be easily functionalized and provides access to the boronic acid pro-ligand, hence allowing facile direct synthesis of the resulting compounds. Computational quantum chemical studies suggest a significant enhancement of the π-donor ability of the amine-stabilized boryloxy ligand because of electron donation from the amine functionality into the p-orbital of the boron atom.

Tin(II) Ureide Complexes: Synthesis, Structural Chemistry, and Evaluation as SnO Precursors.

In an attempt to tailor precursors for application in the deposition of phase pure SnO, we have evaluated a series of tin (1-6) ureide complexes. The complexes were successfully synthesized by employing N,N'-trialkyl-functionalized ureide ligands, in which features such as stability, volatility, and decomposition could be modified with variation of the substituents on the ureide ligand in an attempt to find the complex with the ideal electronic, steric, or coordinative properties, which determine the fate of the final products. The tin(II) ureide complexes 1-6 were synthesized by direct reaction [Sn{NMe2}2] with aryl and alkyl isocyanates in a 1:2 molar ratio. All the complexes were characterized by NMR spectroscopy as well as elemental analysis and, where applicable, thermogravimetric (TG) analysis. The single-crystal X-ray diffraction studies of 2, 3, 4, and 6 revealed that the complexes crystallize in the monoclinic space group P2(1)/n (2 and 4) or in the triclinic space group P-1 (3 and 6) as monomers. Reaction with phenyl isocyanate results in the formation of the bimetallic species 5, which crystallizes in the triclinic space group P-1, a consequence of incomplete insertion into the Sn-NMe2 bonds, versus mesityl isocyanate, which produces a monomeric double insertion product, 6, under the same conditions, indicating a difference in reactivity between phenyl isocyanate and mesityl isocyanate with respect to insertion into Sn-NMe2 bonds. The metal centers in these complexes are all four-coordinate, displaying either distorted trigonal bipyramidal or trigonal bipyramidal geometries. The steric influence of the imido-ligand substituent has a clear effect on the coordination mode of the ureide ligands, with complexes 2 and 6, which contain the cyclohexyl and mesityl ligands, displaying κ2-O,N coordination modes, whereas κ2-N,N' coordination modes are observed for the sterically bulkier tert-butyl and adamantyl derivatives, 3 and 4. The thermogravimetric analysis of the complexes 3 and 4 exhibited excellent physicochemical properties with clean single-step curves and low residual masses in their TG analyses suggesting their potential utility of these systems as MOCVD and ALD precursors.

Evaluation of Sn(II) aminoalkoxide precursors for atomic layer deposition of SnO thin films.

We have successfully prepared and structurally characterized a family of eight tin(II) heteroleptic complexes, [Sn(NR2)(ON)]x (NR2 = NMe2 (1a-d) or N(SiMe3)2 (2a-d); x = 1 or 2) and four homoleptic systems, [Sn(κ2-ON)2] (3a-d) from a series of aminoalcohols and fluorinated aminoalcohols (H{ON}) having a different number of methyl/trifluoromethyl substituents at the α-carbon atom, [HOC(R1)(R2)CH2NMe2] (R1 = R2 = H (H{dmae}) (a); R1 = H, R2 = Me (H{dmap}) (b); R1 = R2 = Me (H{dmamp}) (c); R1 = R2 = CF3 (H{Fdmamp}) (d)). The synthetic route used reactions of either [Sn{N(SiMe3)2}2] or [Sn(NMe2)2] with one or two equivalents of the aminoalcohols (a-d) in dry aprotic solvents leading to elimination of amines and formation of the Sn(II) species 1a-d, 2a-d and 3a-d respectively. All complexes were thoroughly characterized by NMR spectroscopy (1H, 13C, 19F, and 119Sn) as well as single-crystal X-ray diffraction studies. In all case the solid state molecular structures of the complexes have been unambiguously established: the solid state structures 1a-b and 1c are dimeric with central {Sn2N2} cores resulting from bridging {µ2-NMe2} units, in which the Sn(II) atoms are four-coordinate. In contrast, the solid state structures of complexes 1c and 2a-c possess similarly dimeric structures, with four-coordinate Sn(II) atoms, in which the oxygen atoms of the {ON} ligand bridge two Sn(II) centres to form dimers with a central {Sn2O2} core. Uniquely in this study, 2d, [Sn(κ2-O,N-OCMe2CH2NMe2){N(SiMe3)2}] is monomeric with a three coordinate Sn(II) centre. The homoleptic complexes 3a-d are all isostructural with monomeric four-coordinate structures with disphenoidal geometries. Solution state NMR studies reveal complicated ligand exchange processes in the case of the heteroleptic complexes 1a-d and 2a-d. Contrastingly, the homoleptic systems 3a-d show no such behaviour. While complexes 1a-d and 2a-d displayed either poor thermal stability or multistep thermal decomposition processes, the thermal behaviour of the homoleptic complexes, 3a-d, was investigated in order to determine the effects, if any, of the degree of fluorination and asymmetry of the aminoalkoxide ligands on the suitability of these complexes as ALD precursors for the deposition of SnO thin films.

Synthetic, Structural, and Computational Studies on Heavier Tetragen and Chalcogen Triazenide Complexes.

The syntheses of the triazenide complexes [{N(NDipp)2}2M] (Dipp = 2,6-di-isopropylphenyl; M = Ge(II) (1), Sn(II) (2), Pb(II) (3), and Te(II) (5)) are described for the first time. These compounds have been characterized by single-crystal X-ray diffraction and heteronuclear NMR spectroscopy. Density functional theory calculations were employed to confirm the presence and nature of the stereochemically active lone pairs in 1-5, alongside the Gibbs energy changes for their general synthesis, which enable the rationalization of observed reactivities.

Aerosol-Assisted Chemical Vapor Deposition of ZnS from Thioureide Single Source Precursors.

A family of 12 zinc(II) thoureide complexes, of the general form [{L}ZnMe], [{L}Zn{N(SiMe3)2}], and [{L}2Zn], have been synthesized by direct reaction of the thiourea pro-ligands iPrN(H)CS(NMe2) H[L1], CyN(H)CS(NMe2) H[L3], tBuN(H)CS(NMe2) H[L2], and MesN(H)CS(NMe2) H[L4] with either ZnMe2 (1:1) or Zn{N(SiMe3)2}2 (1:1 and 2:1) and characterized by elemental analysis, NMR spectroscopy, and thermogravimetric analysis (TGA). The molecular structures of complexes [{L1}ZnMe]2 (1), [{L2}ZnMe]2] (2), [{L3}ZnMe]∞ (3), [{L4}ZnMe]2] (4), [{L1}Zn{N(SiMe3)2}]2 (5), [{L2}Zn{N(SiMe3)2}]2 (6), [{L3}Zn{N(SiMe3)2}]2] (7), [{L4}Zn{N(SiMe3)2}]2] (8), [{L1}2Zn]2 (9), and [{L4}2Zn]2 (12) have been unambiguously determined using single crystal X-ray diffraction studies. Thermogravimetric analysis has been used to assess the viability of complexes 1-12 as single source precursors for the formation of ZnS. On the basis of TGA data compound 9 was investigated for its utility as a single source precursor to deposit ZnS films on silica-coated glass and crystalline silicon substrates at 150, 200, 250, and 300 °C using an aerosol assisted chemical vapor deposition (AACVD) method. The resultant films were confirmed to be hexagonal-ZnS by Raman spectroscopy and PXRD, and the surface morphologies were examined by SEM and AFM analysis. Thin films deposited from (9) at 250 and 300 °C were found to be comprised of more densely packed and more highly crystalline ZnS than films deposited at lower temperatures. The electronic properties of the ZnS thin films were deduced by UV-Vis spectroscopy to be very similar and displayed absorption behavior and band gap (Eg = 3.711-3.772 eV) values between those expected for bulk cubic-ZnS (Eg = 3.54 eV) and hexagonal-ZnS (Eg = 3.91 eV).

Evaluation of AA-CVD deposited phase pure polymorphs of SnS for thin films solar cells.

Six different thin film solar cells consisting of either orthorhombic (α-SnS) or cubic (π-SnS) tin(ii) sulfide absorber layers have been fabricated, characterized and evaluated. Absorber layers of either π-SnS or α-SnS were selectively deposited by temperature controlled Aerosol Assisted Chemical Vapor Deposition (AA-CVD) from a single source precursor. α-SnS and π-SnS layers were grown on molybdenum (Mo), Fluorine-doped Tin Oxide (FTO), and FTO coated with a thin amorphous-TiO x layer (am-TiO x -FTO), which were shown to have significant impact on the growth rate and morphology of the as deposited thin films. Phase pure α-SnS and π-SnS thin films were characterized by X-ray diffraction analysis (XRD) and Raman spectroscopy (514.5 nm). Furthermore, a series of PV devices with an active area of 0.1 cm2 were subsequently fabricated using a CdS buffer layer, intrinsic ZnO (i-ZnO) as an insulator and Indium Tin Oxide (ITO) as a top contact. The highest solar conversion efficiency for the devices consisting of the α-SnS polymorph was achieved with Mo (η = 0.82%) or FTO (η = 0.88%) as the back contacts, with respective open-circuit voltages (V oc) of 0.135 and 0.144 V, and short-circuit current densities (J sc) of 12.96 and 12.78 mA cm-2. For the devices containing the π-SnS polymorph, the highest efficiencies were obtained with the am-TiO x -FTO (η = 0.41%) back contact, with a V oc of 0.135 V, and J sc of 5.40 mA cm-2. We show that mild post-fabrication hot plate annealing can improve the J sc, but can in most cases compromise the V oc. The effect of sequential annealing was monitored by solar conversion efficiency and external quantum efficiency (EQE) measurements.

Synthesis, characterisation and thermal properties of Sn(ii) pyrrolide complexes.

SnO is a rare example of a stable p-type semiconductor material. Here, we describe the synthesis and characterisation of a family of Sn(ii) pyrrolide complexes for future application in the MOCVD and ALD of tin containing thin films. Reaction of the Sn(ii) amide complex, [{(Me3Si)2N}2Sn], with the N,N-bidentate pyrrole pro-ligand, L1H, forms the hetero- and homoleptic complexes [{L1}Sn{N(SiMe3)2}] (1) and [{L1}2Sn] (2), respectively, bearing the 2-dimethylaminomethyl-pyrrolide ligand (L1). Reaction of [{(Me3Si)2N)}2Sn] with the pyrrole-aldimine pro-ligands, L2H-L7H, results in the exclusive formation of the homoleptic bis-pyrrolide complexes [{L2-7}2Sn] (3-8). All complexes have been characterised by elemental analysis and NMR spectroscopy, and the molecular structures of complexes 1-5 and 8 are determined by single crystal X-ray diffraction. TG analysis and isothermal TG analysis have been used to evaluate the potential utility of these systems as MOCVD and ALD precursors.

Tin guanidinato complexes: oxidative control of Sn, SnS, SnSe and SnTe thin film deposition.

A family of tin(ii) guanidinate complexes of the general form [{RNC(NMe2)NR}2Sn] (R = iPr (6), Cy (7), Tol (9) and Dipp (10)) and [{tBuNC(NMe2)NtBu}Sn{NMe2}] (8) have been synthesised and isolated from the reaction of tin(ii) bis-dimethylamide and a series of carbodiimides (1-5). The cyclic poly-chalcogenide compounds [{CyNC(NMe2)NCy}2Sn{Chx}] (Ch = S, x = 4 (11); Ch = Se, x = 4 (12), and Ch = S, x = 6 (13)) with {SnChx} rings were prepared by the oxidative addition of elemental sulfur and selenium to the heteroleptic stannylene complex [{CyNC(NMe2)NCy}2Sn] (7) in THF at room temperature. Similarly, reaction of compounds 6 and 7 with an equimolar amount of the chalcogen transfer reagents (SC3H6 and Se[double bond, length as m-dash]PEt3, respectively) led to the formation of the chalcogenide tin(iv) complexes [{RNC(NMe2)NR}Sn(Ch)] (R = Cy: Ch = S (14); R = iPr, Ch = Se (15); R = Cy, Ch = Se (16)) with terminal Sn[double bond, length as m-dash]Ch (14 and 16) and dimeric bridged seleno-tin {Sn2Se2} rings (15), respectively. The mono telluro-compounds [{RNC(NMe2)NR}Sn(Te)] (R = iPr (17); R = Cy (18)) were similarly prepared by the oxidative addition of elemental tellurium to 7 and 8, respectively. All of the tin containing compounds have been investigated by multinuclear NMR (1H, 13C 119Sn and 77Se/125Te, where possible), elemental analysis and single crystal X-ray structural analysis (7, 8, 10-13, 15-18). Thermogravimetric analysis (TGA) was used to probe the possible utility of complexes 6-8, 11-12 and 14-18 as single source Sn and SnCh precursors. The Sn(ii) compounds 6 and 7 have been utilised in the growth of thin films by aerosol-assisted chemical vapor deposition (AACVD) at both 300 and 400 °C. The thin films have been analysed by pXRD, EDS, SEM and AFM and shown to be Sn metal. Subsequent studies provided film growth at temperatures as low as 200 °C. Similarly, the mono-chalcogenide systems 14, 16 and 18 have been utilised in the AACVD of thin films. These latter studies provided films, grown at 300 and 400 °C, which have also been analysed by pXRD, Raman spectroscopy, AFM, and SEM and are shown to comprise phase pure SnS, SnSe and SnTe, respectively. These preliminary results demonstrate the potential of such simple guanidinate complexes to act as single source precursors with a high degree of oxidative control over the deposited thin films.

Aerosol-assisted CVD of SnO from stannous alkoxide precursors.

The stannous alkoxides [Sn(OR)2] [R = i-Pr, t-Bu, C(Et)Me2, CHPh2, CPh3] have been synthesised by reaction of Sn(NR'2)2 with two equivalents of HOR [R' = Me, R = i-Pr; R' = SiMe3, R = t-Bu, C(Et)Me2, CHPh2, CPh3]. Single crystal X-ray diffraction analysis of the bis(diphenylmethoxide) (4) and bis(triphenylmethoxide) (5) species have shown them to comprise three-coordinate Sn(ii) centres through dimerisation in the solid state with the alkoxide units adopting transoid and cisoid configurations across the {Sn2O2} cores respectively. Thermogravimetric analysis indicates clean decomposition and some evidence of volatility at temperatures >200 °C for all three aliphatic alkoxides, whereas both the diphenyl- and triphenylmethoxide compounds provide higher decomposition temperatures and, for the triphenylmethoxide derivative, a residual mass consistent with the formation of a carbon-containing residue. The previously reported iso-propoxide (1) and tert-butoxide (2) derivatives have been utilised in toluene solution to deposit SnO thin films by aerosol-assisted chemical vapour deposition (AACVD) on glass at temperatures between 300 and 450 °C. While SnO is deposited under hot wall conditions as the only identifiable phase by p-XRD and Raman spectroscopy for both precursors, morphological analysis by SEM reveals inferior substrate coverage in comparison to previously reported ureide-based precursor systems.

Cobalt(I) Olefin Complexes: Precursors for Metal-Organic Chemical Vapor Deposition of High Purity Cobalt Metal Thin Films.

We report the synthesis and characterization of a family of organometallic cobalt(I) metal precursors based around cyclopentadienyl and diene ligands. The molecular structures of the complexes cyclopentadienyl-cobalt(I) diolefin complexes are described, as determined by single-crystal X-ray diffraction analysis. Thermogravimetric analysis and thermal stability studies of the complexes highlighted the isoprene, dimethyl butadiene, and cyclohexadiene derivatives [(C5H5)Co(η(4)-CH2CHC(Me)CH2)] (1), [(C5H5)Co(η(4)-CH2C(Me)C(Me)CH2)] (2), and [(C5H5)Co(η(4)-C6H8)] (4) as possible cobalt metal organic chemical vapor deposition (MOCVD) precursors. Atmospheric pressure MOCVD was employed using precursor 1, to synthesize thin films of metallic cobalt on silicon substrates under an atmosphere (760 torr) of hydrogen (H2). Analysis of the thin films deposited at substrate temperatures of 325, 350, 375, and 400 °C, respectively, by scanning electron microscopy and atomic force microscopy reveal temperature-dependent growth features. Films grown at these temperatures are continuous, pinhole-free, and can be seen to be composed of hexagonal particles clearly visible in the electron micrograph. Powder X-ray diffraction and X-ray photoelectron spectroscopy all show the films to be highly crystalline, high-purity metallic cobalt. Raman spectroscopy was unable to detect the presence of cobalt silicides at the substrate/thin film interface.

Attenuated Organomagnesium Activation of White Phosphorus.

Sequential reactions between a 2,6-diisopropylphenyl-substituted ß-diketiminato magnesium n-butyl derivative and P4 allow the highly discriminating synthesis of unusual [nBu2P4](2-) and [nBu2P8](2-) cluster dianions.

Why are the {Cu4N4} rings in copper(I) phosphinimide clusters [Cu{µ-N = PR3}]4 (R = NMe3 or Ph) planar?

The copper phosphinimide complexes [Cu{µ-N[double bond, length as m-dash]PR3}]4 (1, R = NMe2 and 2, R = Ph) were obtained in good yields from the reactions of Cu[Mes] (Mes = mesityl, C6H2Me3-2,4,6) with the corresponding iminophosphoranes, HNPR3. The molecular structures of 1 and 2 reveal the presence of planar eight-membered {Cu4N4} rings which contrasts with the saddle-shaped {M4N4} rings found in related metal phosphinimide complexes. According to computations, there is negligible aromaticity in the planar {Cu4N4} rings in 1 and 2 and the saddle shape observed in related {M4N4} rings is due to steric factors.

Solid-state interconversions: unique 100 % reversible transformations between the ground and metastable states in single-crystals of a series of nickel(II) nitro complexes.

The solid-state, low-temperature linkage isomerism in a series of five square planar group 10 phosphino nitro complexes have been investigated by a combination of photocrystallographic experiments, Raman spectroscopy and computer modelling. The factors influencing the reversible solid-state interconversion between the nitro and nitrito structural isomers have also been investigated, providing insight into the dynamics of this process. The cis-[Ni(dcpe)(NO2)2] (1) and cis-[Ni(dppe)(NO2)2] (2) complexes show reversible 100 % interconversion between the η(1)-NO2 nitro isomer and the η(1)-ONO nitrito form when single-crystals are irradiated with 400 nm light at 100 K. Variable temperature photocrystallographic studies for these complexes established that the metastable nitrito isomer reverted to the ground-state nitro isomer at temperatures above 180 K. By comparison, the related trans complex [Ni(PCy3)2(NO2)2] (3) showed 82 % conversion under the same experimental conditions at 100 K. The level of conversion to the metastable nitrito isomers is further reduced when the nickel centre is replaced by palladium or platinum. Prolonged irradiation of the trans-[Pd(PCy3)2(NO2)2] (4) and trans-[Pt(PCy3)2(NO2)2] (5) with 400 nm light gives reversible conversions of 44 and 27 %, respectively, consistent with the slower kinetics associated with the heavier members of group 10. The mechanism of the interconversion has been investigated by theoretical calculations based on the model complex [Ni(dmpe)Cl(NO2)].

Synthesis and materials chemistry of bismuth tris-(di-i-propylcarbamate): deposition of photoactive Bi2O3 thin films.

The bismuth carbamate Bi(O2CNPr(i)2)3, a tetramer in the solid-state, has been synthesized and used to deposit mixtures of bismuth oxides by aerosol-assisted chemical vapor deposition (AACVD). The nature of the deposited oxide is a function of both temperature and run-time. Initially, δ-Bi2O3 is deposited, over which grows a thick layer of ß-Bi2O3 nanowires, the latter having an increasing degree of preferred orientation at higher deposition temperatures. The photocatalytic activity of a thin film of δ-Bi2O3 for the degradation of methylene blue dye was found to be similar to that of a commercial TiO2 film on glass, while the film overcoated with ß-Bi2O3 nanowires was less active. Exposure of Bi(O2CNPr(i)2)3 to controlled amounts of moist air affords the novel oxo-cluster Bi8(O)6(O2CNPr(i)2)12, whose structure has also been determined.

New organo- and amidozinc derivatives of primary amines.

Five new zinc derivatives of primary amines [R'ZnN(H)R]2 [R = SiPh3, R' = Me (1), N(SiMe3)2 (4); R = Si(NMe2)3, R' = Me (2), Et (3), N(SiMe3)2 (5)] have been synthesised by reaction of R'2Zn and H2NR. All five species are dimers in which the N-H groups are disposed in a trans manner about a central Zn2N2 ring. In 1 and 4 the coordination at zinc is trigonal planar, while in 2, 3, 5 the zinc is in a distorted tetrahedral environment due to additional Me2N: → Zn coordination from one SiNMe2 group. 5 was found to be generally resistant to NH deprotonation by bases such as MN(SiMe3)2 (M = Li, K) or Zn[N(SiMe3)2]2, but reacts with Sn[N(SiMe3)2]2 to give the tin-free, tetrameric mixed zinc-imido/amido species, [{(Me3Si)2N}{(Me2N)3SiN(H)}{(Me2N)3SiN}Zn2]2 (6) which can be viewed as part of a hexameric Zn6N6 drum which has lost a Zn2N2 ring.

Cobalt(III) diazabutadiene precursors for metal deposition: nanoparticle and thin film growth.

We report the synthesis and characterization of a family of cobalt(III) metal precursors, based around cyclopentadienyl and diazabutadiene ligands. The molecular structure of the complexes cyclopentadienyl-Cobalt(III)(N,N'-dicyclohexyl-diazabutadiene) (2c) and cyclopentadienyl-Cobalt(III)(N,N'-dimesityl-diazabutadiene) (2d) are described, as determined by single crystal X-ray diffraction analysis. Thermogravimetric analysis of the complexes highlighted the isopropyl derivative CpCo((i)Pr2-dab) (2a) as a possible cobalt metal chemical vapor deposition (CVD) precursor. Atmospheric pressure CVD (AP-CVD) was employed using precursor 2a to synthesize thin films of metallic cobalt on silicon substrates under an atmosphere of hydrogen (H2). Analysis of the thin films deposited at substrate temperatures of 250 °C, 275 °C, 300 °C, 325 °C, and 350 °C, respectively, by scanning electron microscopy (SEM) and atomic force microscopy (AFM) reveal temperature dependent growth features: films grown at 325 and 350 °C are continuous and pinhole free, whereas those films grown at substrate temperatures of 250 °C, 275 °C, and 300 °C consist of crystalline nanoparticles. Powder X-ray diffraction (PXRD) and X-ray photoelectron spectroscopy (XPS) all show the films to be high purity metallic cobalt. Raman spectroscopy has also been used to prove the absence of cobalt silicides at the substrate/thin film interface.