Systems and Methods for Transformation and Degradation Analysis.

Modern concepts in irreversible thermodynamics are applied to system transformation and degradation analyses. Phenomenological entropy generation (PEG) theorem is combined with the Degradation-Entropy Generation (DEG) theorem for instantaneous multi-disciplinary, multi-scale, multi-component system characterization. A transformation-PEG theorem and space materialize with system and process defining elements and dimensions. The near-100% accurate, consistent results and features in recent publications demonstrating and applying the new TPEG methods to frictional wear, grease aging, electrochemical power system cycling-including lithium-ion battery thermal runaway-metal fatigue loading and pump flow are collated herein, demonstrating the practicality of the new and universal PEG theorem and the predictive power of models that combine and utilize both theorems. The methodology is useful for design, analysis, prognostics, diagnostics, maintenance and optimization.

Potential Large-Scale CO2 Utilisation for Salicylic Acid Production via a Suspension-Based Kolbe-Schmitt Reaction in Toluene.

Conversion of CO2 into organic chemicals offers a promising route for advancing the circularity of carbon capture, utilisation, and storage in line with the international 2050 Net Zero agenda. The widely known commercialised chemical fixation of CO2 into organic chemicals is the century-old Kolbe-Schmitt reaction, which carboxylates phenol (via sodium phenoxide) into salicylic acid. The carboxylation reaction is normally carried out between the gas-solid phases in a batch reactor. The mass and heat transfer limitations of such systems require rather long reaction times and a high pressure of CO2 and are often characterised by the low formation of undesirable side products. To address these drawbacks, a novel suspension-based carboxylation method has been designed and carried out in this present study, where sodium phenoxide is dispersed in toluene to react with CO2. Importantly, the addition of phenol played a critical role in promoting the stoichiometric conversion of phenoxide to salicylic acid. Under the optimal conditions of a phenol/phenoxide molar ratio of 2:1 in toluene, a reaction temperature of 225 °C, a CO2 pressure of 30 bar, a reaction time of 2 h, and stirring at 1000 rpm, an impressive salicylic acid molar yield of 92.68% has been achieved. The reaction mechanism behind this has been discussed. This development provides us with the potential to achieve a carboxylation reaction of phenoxide with CO2 more effectively in a continuous reactor. It can also facilitate the large-scale fixing of CO2 into hydroxy aromatic carboxylic acids, which can be used as green organic chemical feedstocks for making various products, including long-lived polymeric materials.

Machine Learning Application in Horticulture and Prospects for Predicting Fresh Produce Losses and Waste: A Review.

The current review examines the state of knowledge and research on machine learning (ML) applications in horticultural production and the potential for predicting fresh produce losses and waste. Recently, ML has been increasingly applied in horticulture for efficient and accurate operations. Given the health benefits of fresh produce and the need for food and nutrition security, efficient horticultural production and postharvest management are important. This review aims to assess the application of ML in preharvest and postharvest horticulture and the potential of ML in reducing postharvest losses and waste by predicting their magnitude, which is crucial for management practices and policymaking in loss and waste reduction. The review starts by assessing the application of ML in preharvest horticulture. It then presents the application of ML in postharvest handling and processing, and lastly, the prospects for its application in postharvest loss and waste quantification. The findings revealed that several ML algorithms perform satisfactorily in classification and prediction tasks. Based on that, there is a need to further investigate the suitability of more models or a combination of models with a higher potential for classification and prediction. Overall, the review suggested possible future directions for research related to the application of ML in postharvest losses and waste quantification.

A comprehensive review of recent advances in the applications and biosynthesis of oxalic acid from bio-derived substrates.

Organic acids are important compounds with numerous applications in different industries. This work presents a comprehensive review of the biological synthesis of oxalic acid, an important organic acid with many industrial applications. Due to its important applications in pharmaceuticals, textiles, metal recovery, and chemical and metallurgical industries, the global demand for oxalic acid has increased. As a result, there is an increasing need to develop more environmentally friendly and economically attractive alternatives to chemical synthesis methods, which has led to an increased focus on microbial fermentation processes. This review discusses the specific strategies for microbial production of oxalic acid, focusing on the benefits of using bio-derived substrates to improve the economics of the process and promote a circular economy in comparison with chemical synthesis. This review provides a comprehensive analysis of the various fermentation methods, fermenting microorganisms, and the biochemistry of oxalic acid production. It also highlights key sustainability challenges and considerations related to oxalic acid biosynthesis, providing important direction for further research. By providing and critically analyzing the most recent information in the literature, this review serves as a comprehensive resource for understanding the biosynthesis of oxalic acid, addressing critical research gaps, and future advances in the field.

Methods to Calculate Entropy Generation.

Entropy generation, formulated by combining the first and second laws of thermodynamics with an appropriate thermodynamic potential, emerges as the difference between a phenomenological entropy function and a reversible entropy function. The phenomenological entropy function is evaluated over an irreversible path through thermodynamic state space via real-time measurements of thermodynamic states. The reversible entropy function is calculated along an ideal reversible path through the same state space. Entropy generation models for various classes of systems-thermal, externally loaded, internally reactive, open and closed-are developed via selection of suitable thermodynamic potentials. Here we simplify thermodynamic principles to specify convenient and consistently accurate system governing equations and characterization models. The formulations introduce a new and universal Phenomenological Entropy Generation (PEG) theorem. The systems and methods presented-and demonstrated on frictional wear, grease degradation, battery charging and discharging, metal fatigue and pump flow-can be used for design, analysis, and support of diagnostic monitoring and optimization.

Factors influencing JUUL e-cigarette nicotine vapour-induced reward, withdrawal, pharmacokinetics and brain connectivity in rats: sex matters.

Though vaping likely represents a safer alternative to smoking, it is not without risks, many of which are not well understood, especially for vulnerable populations. Here we evaluate the sex- and age-dependent effects of JUUL nicotine vapour in rats. Following passive nicotine vapour exposures (from 59 mg/ml JUUL nicotine pods), rats were evaluated for reward-like behaviour, locomotion, and precipitated withdrawal. Pharmacokinetics of nicotine and its metabolites in brain and plasma and the long-term impact of nicotine vapour exposure on functional magnetic resonance imaging-based brain connectivity were assessed. Adult female rats acquired conditioned place preference (CPP) at a high dose (600 s of exposure) of nicotine vapour while female adolescents, as well as male adults and adolescents did not. Adult and adolescent male rats displayed nicotine vapour-induced precipitated withdrawal and hyperlocomotion, while both adult and adolescent female rats did not. Adult females showed higher venous and arterial plasma and brain nicotine and nicotine metabolite concentrations compared to adult males and adolescent females. Adolescent females showed higher brain nicotine concentration compared to adolescent males. Both network-based statistics and between-component group connectivity analyses uncovered reduced connectivity in nicotine-exposed rats, with a significant group by sex interaction observed in both analyses. The short- and long-term effects of nicotine vapour are affected by sex and age, with distinct behavioural, pharmacokinetic, and altered network connectivity outcomes dependent on these variables.

Comprehensive Characterization of Some Selected Biomass for Bioenergy Production.

There is a lack of information about the detailed characterization of biomass of Nigerian origin. This study presents a comprehensive characterization of six biomass, groundnut shells, corncob, cashew leaves, Ixora coccinea (flame of the woods), sawdust, and lemongrass, to aid appropriate selection for bio-oil production. The proximate, ultimate, calorific value and compositional analyses were carried out following the American Standard for Testing and Materials (ASTM) standards. Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy with energy-dispersive X-ray spectroscopy, and X-ray fluorescence were employed in this study for functional group analyses, thermal stability, and structural analyses. The H/C and O/C atomic ratios, fuel ratio, ignitability index, and combustibility index of the biomass samples were evaluated. Groundnut shells, cashew leaves, and lemongrass were identified as promising feedstocks for bio-oil production based on their calorific values (>20 MJ/kg). Sawdust exhibited favorable characteristics for bio-oil production as indicated by its higher volatile matter (79.28%), low ash content (1.53%), low moisture content (6.18%), and high fixed carbon content (13.01%). Also, all samples showed favorable ignition and flammability properties. The low nitrogen (<0.12%) and sulfur (<0.04%) contents in the samples make them environmentally benign fuels as a lower percentage of NOx and SOx will be released during the production of the bio-oil. These results are contributions to the advancement of a sustainable and efficient carbon-neutral energy mix, promoting biomass resource utilization for the generation of energy.

CD8+ T cells maintain killing of MHC-I-negative tumor cells through the NKG2D-NKG2DL axis.

The accepted paradigm for both cellular and anti-tumor immunity relies upon tumor cell killing by CD8+ T cells recognizing cognate antigens presented in the context of target cell major histocompatibility complex (MHC) class I (MHC-I) molecules. Likewise, a classically described mechanism of tumor immune escape is tumor MHC-I downregulation. Here, we report that CD8+ T cells maintain the capacity to kill tumor cells that are entirely devoid of MHC-I expression. This capacity proves to be dependent instead on interactions between T cell natural killer group 2D (NKG2D) and tumor NKG2D ligands (NKG2DLs), the latter of which are highly expressed on MHC-loss variants. Necessarily, tumor cell killing in these instances is antigen independent, although prior T cell antigen-specific activation is required and can be furnished by myeloid cells or even neighboring MHC-replete tumor cells. In this manner, adaptive priming can beget innate killing. These mechanisms are active in vivo in mice as well as in vitro in human tumor systems and are obviated by NKG2D knockout or blockade. These studies challenge the long-advanced notion that downregulation of MHC-I is a viable means of tumor immune escape and instead identify the NKG2D-NKG2DL axis as a therapeutic target for enhancing T cell-dependent anti-tumor immunity against MHC-loss variants.

Identifying opportunities for hepatic encephalopathy self-management: A mixed methods systematic review and synthesis.

Background: Hepatic encephalopathy (HE) in cirrhosis is an extremely challenging complication for patients and care partners. To identify potentially modifiable factors to enhance HE self-management strategies, we conducted a synthesis of quantitative and qualitative research about real-world HE behaviours, knowledge, and experiences. Methods: Using the EPPI-Centre's mixed methods synthesis procedure, a systematic literature search in five databases was completed; methods of selected articles underwent critical appraisal followed by descriptive analysis and coded line-by-line of content. Through refutational translation, the findings from the quantitative and qualitative syntheses were juxtaposed to highlight congruencies, incongruencies, or gaps. These findings informed generation of cross-analytical themes that were transformed into action statements. Results: The quantitative narrative review of synthesis (n = 17) generated four themes (patients had low awareness of HE and low treatment adherence rates, physicians had a non-uniform approach to non-pharmaceutical therapies). Meta-aggregation of qualitative data from six articles yielded three themes (patients and care partners had low levels of HE awareness, were unfamiliar with HE self-management, and were adherent to treatments). Comparison of findings revealed three congruencies, two gaps, and one incongruency. The combined synthesis yielded two self-management themes: universal patient-oriented cirrhosis HE education and ensuring each health care encounter systematically addresses HE to guarantee health care is continuously modified to meet their needs. Conclusions: By drawing on elements of Bloom's Taxonomy and distributed knowledge networks, deliberate patient-oriented HE messaging at all health care encounters is greatly needed to improve health outcomes and reduce care burdens related to HE.

Multi-criteria decision analysis for the evaluation and screening of sustainable aviation fuel production pathways.

The aviation sector, a significant greenhouse gas emitter, must lower its emissions to alleviate the climate change impact. Decarbonization can be achieved by converting low-carbon feedstock to sustainable aviation fuel (SAF). This study reviews SAF production pathways like hydroprocessed esters and fatty acids (HEFA), gasification and Fischer-Tropsch Process (GFT), Alcohol to Jet (ATJ), direct sugar to hydrocarbon (DSHC), and fast pyrolysis (FP). Each pathway's advantages, limitations, cost-effectiveness, and environmental impact are detailed, with reaction pathways, feedstock, and catalyst requirements. A multi-criteria decision framework (MCDS) was used to rank the most promising SAF production pathways. The results show the performance ranking order as HEFA > DSHC > FP > ATJ > GFT, assuming equal weight for all criteria.

Ozone Decontamination of Medical and Nonmedical Devices: An Assessment of Design and Implementation Considerations.

The control of infectious diseases can be improved via carefully designed decontamination equipment and systems. Research interest in ozone (a powerful antimicrobial agent) has significantly increased over the past decade. The COVID-19 pandemic has also instigated the development of new ozone-based technologies for the decontamination of personal protective equipment, surfaces, materials, and indoor environments. As this interest continues to grow, it is necessary to consider key factors affecting the applicability of lab-based findings to large-scale systems utilizing ozone. In this review, we present recent developments on the critical factors affecting the successful deployments of industrial ozone technologies. Some of these include the medium of application (air or water), material compatibility, efficient circulation and extraction, measurement and control, automation, scalability, and process economics. We also provide a comparative assessment of ozone relative to other decontamination methods/sterilization technologies and further substantiate the necessity for increased developments in gaseous and aqueous ozonation. Modeling methodologies, which can be applied for the design and implementation of ozone contacting systems, are also presented in this review. Key knowledge gaps and open research problems/opportunities are extensively covered including our recommendations for the development of novel solutions with industrial importance.

Ozone application in different industries: A review of recent developments.

Ozone - a powerful antimicrobial agent, has been extensively applied for decontamination purposes in several industries (including food, water treatment, pharmaceuticals, textiles, healthcare, and the medical sectors). The advent of the COVID-19 pandemic has led to recent developments in the deployment of different ozone-based technologies for the decontamination of surfaces, materials and indoor environments. The pandemic has also highlighted the therapeutic potential of ozone for the treatment of COVID-19 patients, with astonishing results observed. The key objective of this review is to summarize recent advances in the utilisation of ozone for decontamination applications in the above-listed industries while emphasising the impact of key parameters affecting microbial reduction efficiency and ozone stability for prolonged action. We realise that aqueous ozonation has received higher research attention, compared to the gaseous application of ozone. This can be attributed to the fact that water treatment represents one of its earliest applications. Furthermore, the application of gaseous ozone for personal protective equipment (PPE) and medical device disinfection has not received a significant number of contributions compared to other applications. This presents a challenge for which the correct application of ozonation can mitigate. In this review, a critical discussion of these challenges is presented, as well as key knowledge gaps and open research problems/opportunities.

OFFICE MANAGEMENT OF OZURDEX IMPLANT DISLOCATION INTO THE ANTERIOR CHAMBER.

PURPOSE: To describe a novel office procedure that permits the repositioning of an Ozurdex implant from the anterior chamber back into the vitreous cavity. METHODS: Description of an office technique for Ozurdex repositioning using a 30-gauge needle. RESULTS: In both cases, the Ozurdex implant was successfully returned to the vitreous cavity. In Case 1, the patient's visual acuities 1 and 2 weeks after this were 20/70 and 20/40, respectively, and had no further complications. In Case 2, the patient returned 1 week later, with the implant remaining posterior and a visual acuity of 20/40. CONCLUSION: The success of this novel technique in these cases demonstrates the potential to avoid a surgical procedure in the event of Ozurdex implant migration to the anterior chamber, while at the same time allowing the Ozurdex implant to remain effective in the eye.

Nicotine Enhances Intravenous Self-administration of Cannabinoids in Adult Rats.

INTRODUCTION: Nicotine and cannabis are commonly used together, yet few studies have investigated the effects of concurrent administration. Nicotine exhibits reinforcement enhancing effects by promoting the reinforcing properties of stimuli including other drugs. As many studies of this effect used non-contingent nicotine, we implemented a dual-self-administration model where rats have simultaneous access to two drugs and choose which to self-administer throughout a session. Here, we investigated the effect of self-administered or non-contingently delivered nicotine on cannabinoid self-administration. METHODS: Adult male rats were allowed to self-administer the synthetic cannabinoid WIN 55,212-2 (WIN) intravenously, with or without subcutaneous nicotine injections before each session. A separate group of animals were allowed to self-administer WIN, nicotine, or saline using a dual-catheter procedure, where each solution was infused independently and associated with a separate operant response. A third group of male and female rats were allowed to self-administer delta-9-tetrahydrocannabinol (THC) with or without pre-session injections of nicotine. RESULTS: Nicotine injections increased self-administration of WIN and THC. During dual self-administration, nicotine availability increased saline and WIN infusions but nicotine intake was not changed by WIN or saline availability. Rats preferred nicotine over saline, but preferred nicotine and WIN equally when both were available. The effect of nicotine on cannabinoid self-administration was acute and reversible when nicotine was no longer present. CONCLUSIONS: These results expand our understanding of the ability of nicotine to enhance reinforcement of other drugs and suggest that co-use of nicotine and cannabinoids promotes cannabinoid use beyond what would be taken alone. IMPLICATIONS: This study utilizes a dual intravenous self-administration model to investigate the ability of nicotine to enhance cannabinoid intake. Our results demonstrate that the reinforcement enhancing properties of nicotine on drug use extend to include cannabinoids, but that this effect occurs specifically when nicotine is administered alongside the cannabinoid. Interestingly, cannabinoid use did not promote nicotine intake, suggesting this mechanism of reinforcement is specific to nicotine.

A Meta-analysis on Associated Risk of Mortality in Nonalcoholic Fatty Liver Disease.

OBJECTIVE: Nonalcoholic fatty liver disease (NAFLD) affects much of the worldwide population and poses a significant burden to the global healthcare. The rising numbers of individuals with NAFLD and instances of mortality point toward the importance of understanding the association causes of mortality in NAFLD. This meta-analysis aimed to seek the associations of NAFLD with all-cause, cardiovascular disease (CVD)-related, liver-related, and cancer-related mortality. METHODS: MEDLINE and Embase were searched for articles relating to causes of mortality between NAFLD and non-NAFLD. The DerSimonian and Laird random-effects model was used to analyze adjusted hazard ratios (HR), and a sensitivity analysis was conducted to reduce heterogeneity through a graphical display of study heterogeneity. RESULTS: Fifteen studies involving 10 286 490 patients were included. Individuals with NAFLD exhibited an increased risk of all-cause mortality (HR, 1.32; 95% CI, 1.09-1.59; P < .01; I2 = 96.00%), CVD-related mortality (HR, 1.22; 95% CI, 1.06-1.41; P < .01; I2 = 81.00%), and cancer-related mortality (HR, 1.67; 95% CI, 1.15-2.41; P < .01; I2 = 95.00%). However, no significant association was found between liver-related mortality and NAFLD (HR, 3.58; 95% CI, 0.69-18.46; P =.13; I2 = 96.00%). The sensitivity analysis conducted with graphic display of heterogeneity and only population-based studies found similar results. CONCLUSION: NAFLD was associated with an increased risk of all-cause, CVD-related, and cancer-related mortality but not liver-related mortality. The finding is likely because of low fibrosis prevalence in the community. However, the significant burden in other causes of mortality beyond the liver points to a need for multidisciplinary efforts to reduce the mortality risks.

Subcritical Water Hydrolysis of Fresh and Waste Cooking Oils to Fatty Acids Followed by Esterification to Fatty Acid Methyl Esters: Detailed Characterization of Feedstocks and Products.

In this present work, the hydrolysis of a sample of rapeseed oil (RSO) and two waste cooking oil (WCO) samples in subcritical water has been carried out in a stirred batch stainless-steel reactor to produce fatty acids. Using RSO as a model triglyceride, the effects of reaction parameters on the yields of fatty acids were investigated to determine the optimum set of hydrolysis conditions to be a temperature of 300 °C, a reaction time of 60 min, and a vegetable oil-water mass ratio of 1:2. The set of optimum conditions was applied to the hydrolysis of the WCOs. Oleic acid was the dominant fatty acid with yields of 74.4 wt % from RSO and 57.5 and 72.4 wt % from the two WCOs, respectively, while palmitic acid was the second most abundant fatty acid with yields of up to 31 wt %. The feedstocks and fatty acid products were characterized by acid-base titration and thermogravimetric analysis (TGA). Thereafter, the hydrolysis products from the optimum conditions were esterified to their fatty acid methyl esters (FAMEs), which were further characterized by gas chromatography-mass spectrometry (GC/MS) and TGA. With RSO at the optimum hydrolysis conditions, acid-base titration gave a fatty acid yield of 97.2 wt %, while TGA gave 86 wt %. Under the same conditions, the yield of FAMEs from GC/MS analysis was 88.6 wt %, while TGA gave a FAMEs' yield of 91 wt %. This study showed that the simple TGA method provided detailed and complete characterization of lipid feedstocks and their conversion products. In addition, subcritical water hydrolysis can be used to valorize WCOs to fatty acids, with little or no extensive feedstock purification, for various applications including biodiesel production.

Non-alcoholic fatty liver disease: Is surgery the best current option and can novel endoscopy play a role in the future?

Over the last decade, non-alcoholic fatty liver disease (NAFLD) has overtaken alcohol as the leading cause of cirrhosis in the Western world. There remains to be a licensed pharmacological treatment for NAFLD. Weight loss is advised for all patients with NAFLD. Many patients however, struggle to lose the recommended weight with lifestyle modification alone. Many drugs have either failed to show significant improvement of steatosis or are poorly tolerated. Bariatric surgery has been shown to reduce liver steatosis and regress liver fibrosis. The pathophysiology is not fully understood, however recent evidence has pointed towards changes in the gut microbiome following surgery. Novel endoscopic treatment options provide a minimally invasive alternative for weight loss. Randomised controlled trials are now required for further clarification.

Insights on production mechanism and industrial applications of renewable propylene glycol.

Propylene glycol is a ubiquitous sustainable chemical that have several industrial applications. It can be used as a non-toxic antifreeze, moisturizers, and in cosmetics products. Commercial production of propylene glycol uses petroleum-based propylene oxide. Therefore, there is a need to develop alternative and renewable propylene glycol production routes. Renewable propylene glycol can be produced from catalytic hydrogenolysis of glycerol. This study reviews different catalyst for glycerol hydrogenolysis, the reaction mechanism, and process challenges. Additionally, previous studies related to the economic and environmental assessment of propylene glycol production are presented in detail. The technology readiness level of different production pathways were outlined as well as the challenges and future direction of propylene glycol production from glycerol and other renewable feedstocks. Catalytic transfer hydrogenolysis, a process that uses renewable H-donors in liquid medium for hydrogenolysis reaction is also discussed and compared with conventional hydrogenolysis.