Preformulation studies for generic omeprazole magnesium enteric coated tablets.

Preformulation is an important step in the rational formulation of an active pharmaceutical ingredient (API). Micromeritics properties: bulk density (BD) and tapped density (TD), compressibility index (Carr's index), Hauser's ratio (H), and sieve analysis were performed in order to determine the best excipients to be used in the formulation development of omeprazole magnesium enteric coated tablets. Results show that omeprazole magnesium has fair flow and compressibility properties (BD 0.4 g/mL, TD 0.485 g/mL, Carr's index 17.5%, Hauser's ratio 1.2, and sieve analysis time 5 minutes). There were no significant drug excipient interactions except change in colour in all three conditions in the mixture of omeprazole and aerosil 200. Moisture content loss on drying in all three conditions was not constant and the changes were attributed to surrounding environment during the test time. Changes in the absorption spectra were noted in the mixture of omeprazole and water aerosil only in the visible region of 350-2500 nm. Omeprazole magnesium alone and with all excipients showed no significant changes in omeprazole concentration for a 30-day period. Omeprazole magnesium formulation complies with USP standards with regards to the fineness, flowability, and compressibility of which other excipients can be used in the formulation.

Accuracy profiles assessing the validity for routine use of high-performance thin-layer chromatographic assays for drug formulations.

The accuracy profile, based on total error, integrates several validation parameters, such as trueness, precision and linearity, providing one statistic which enables decision on the suitability of a method for its intended purpose. Two assay methods for formulations are validated using accuracy profiles as an alternative approach to classic method validation. It concerns high-performance thin-layer chromatography (HPTLC) methods, which initially were validated using the classic approach. The first method assayed sulfamethoxazole and trimethoprim, and the second lamivudine, stavudine and nevirapine. Both formulations are fixed-dose combination tablets. The resulting accuracy profiles showed that the 95% ß-expectation tolerance limits for all compounds fell well within the bias acceptance limits set at ±5%. This means that the two analytical thin-layer chromatographic methods are capable of making accurate results at the studied concentration ranges of each compound. Measurement uncertainties of every compound at each concentration level could also be determined from the accuracy profile data.

Optimization of a reversed-phase-high-performance thin-layer chromatography method for the separation of isoniazid, ethambutol, rifampicin and pyrazinamide in fixed-dose combination antituberculosis tablets.

This paper presents the development of a new RP-HPTLC method for the separation of pyrazinamide, isoniazid, rifampicin and ethambutol in a four fixed-dose combination (4 FDC) tablet formulation. It is a single method with two steps in which after plate development pyrazinamide, isoniazid and rifampicin are detected at an UV wavelength of 280 nm. Then ethambutol is derivatized and detected at a VIS wavelength of 450 nm. Methanol, ethanol and propan-1-ol were evaluated modifiers to form alcohol-water mobile phases. Systematic optimization of the composition of each alcohol in the mobile phase was carried out using the window diagramming concept to obtain the best separation. Examination of the Rf distribution of the separated compounds showed that separation of the compounds with the mobile phase containing ethanol at the optimal fraction was almost situated within the optimal Rf-values region of 0.20-0.80. Therefore, ethanol was selected as organic modifier and the optimal mobile phase composition was found to be ethanol, water, glacial acetic acid (>99% acetic acid) and 37% ammonia solution (70/30/5/1, v/v/v/v). The method is new, quick and cheap compared to the actual method in the International Pharmacopoeia for the assay of the 4 FDC tablets, which involves the use of two separate HPLC methods.

HPTLC methods to assay active ingredients in pharmaceutical formulations: a review of the method development and validation steps.

High-performance thin-layer chromatography (HPTLC) is still increasingly finding its way in pharmaceutical analysis in some parts of the world. With the advancements in the stationary phases and the introduction of densitometers as detection equipment, the technique achieves for given applications a precision and trueness comparable to high-performance liquid chromatography (HPLC). In this review, the literature is surveyed for developed and validated HPTLC methods to assay active ingredients in pharmaceutical formulations published in the period 2005-2011. Procedures and approaches for method development, validation and quantitative assays are compared with the standard ways of conducting them. Applications of HPTLC in some other areas are also briefly highlighted.

Development and validation of a normal-phase HPTLC method for the simultaneous analysis of lamivudine, stavudine and nevirapine in fixed-dose combination tablets.

This paper presents the development and validation of an improved method for the simultaneous analysis of lamivudine (LVD), stavudine (STV) and nevirapine (NVP) using high-performance thin-layer chromatography (HPTLC) with densitometric detection. Separation was performed on silica gel 60F(254) plates. The mobile phase is comprised of ethylacetate, methanol, toluene and concentrated ammonia (38.7:19.4:38.7:3.2, v:v:v:v). Detection wavelength was 254 nm. The R(f) values were 0.24±0.03, 0.38±0.04 and 0.69±0.04 (n=8) for LVD, STV and NVP, respectively. An F-test indicated that calibration graphs were adequately linear at the evaluated concentration ranges. The pooled %RSD for repeatability of the percentage amount recovered for LVD, STV and NVP were found to be 0.62, 0.54, and 0.79, and the pooled %RSD for time-different intermediate precision were 1.66, 1.27 and 1.21. The percentage recoveries for the trueness were 99.2%±1.5 for LVD, 98.6%±1.5 for STV and 99.3%±1.7 for NVP (n=3). Most factors evaluated in the robustness test were found to have an insignificant effect on the selected responses at 95% confidence level. This method was successfully used to analyze fixed-dose tablets samples of LVD, STV and NVP.

Development and validation of a normal-phase high-performance thin layer chromatographic method for the analysis of sulfamethoxazole and trimethoprim in co-trimoxazole tablets.

Pneumocystis carinii pneumonia (PCP) is often the ultimate mortal cause for immunocompromised individuals, such as HIV/AIDS patients. Currently, the most effective medicine for treatment and prophylaxis is co-trimoxazole, a synergistic combination of sulfamethoxazole (SMX) and trimethoprim (TMP). In order to ensure a continued availability of high quality co-trimoxazole tablets within resource-limited countries, Medicines Regulatory Authorities must perform quality control of these products. However, most pharmacopoeial methods are based on high-performance liquid chromatographic (HPLC) methods. Because of the lack of equipment, the Tanzania Food and Drugs Authority (TFDA) laboratory decided to develop and validate an alternative method of analysis based on the TLC technique with densitometric detection, for the routine quality control of co-trimoxazole tablets. SMX and TMP were separated on glass-backed silica gel 60 F(254) plates in a high-performance thin layer chromatograph (HPTLC). The mobile phase was comprised of toluene, ethylacetate and methanol (50:28.5:21.5, v:v:v). Detection wavelength was 254 nm. The R(f) values were 0.30 and 0.61 for TMP and SMX, respectively. This method was validated for linearity, precision, trueness, specificity and robustness. Cochran's criterion test indicated homoscedasticity of variances for the calibration data. The F-tests for lack-of-fit indicated that straight lines were adequate to describe the relationship between spot areas and concentrations for each compound. The percentage relative standard deviations for repeatability and time-different precisions were 0.98 and 1.32, and 0.83 and 1.64 for SMX and TMP, respectively. Percentage recovery values were 99.00%+/-1.83 and 99.66%+/-1.21 for SMX and TMP, respectively. The method was found to be robust and was then successfully applied to analyze co-trimoxazole tablet samples.

Evaluation of quality of hydrogen peroxide-based antiseptic solutions available in Dar es Salaam, Tanzania.

BACKGROUND: Hydrogen peroxide solutions of low concentrations are important antiseptics and deodorants used in hospitals and as home-remedies. The preparations have the disadvantage of being unstable when exposed to sunlight and when stored for a long time. They decompose slowly, releasing oxygen and water thus decreasing the available hydrogen peroxide for antimicrobial action. OBJECTIVE: To assess the quality of hydrogen peroxide solution-based antiseptics available in Dar es Salaam. METHODOLOGY: One hundred and sixty-five samples were collected at random from pharmacies and medical stores, and analysed. One hundred and forty samples were hydrogen peroxide solutions intended for wound cleansing and 25 samples were eardrops. Among these samples, 116 were from manufacturer A, 24 from manufacturer B and 25 samples of eardrops were from manufacturer C. RESULTS: Eighteen (26%) of the samples from medical stores failed to meet specifications. Of the 70 samples from pharmacies, 20 (29%) failed to meet the BP 2005 specifications. All the 25 samples of eardrops failed to comply with specifications. The average hydrogen peroxide contents (+/-SD) of the samples from medical stores and pharmacies were 6.6 +/- 0.6%, 6.8 +/- 0.4% w/v respectively. The difference was statistically significant (P < 0.05). CONCLUSION: A significant proportion of hydrogen peroxide products in the Dar es Salaam market is of poor quality. There is a need for continuous monitoring of the quality of hydrogen peroxide available in the city.

Storage of antimalarials at household level and associated factors in Kiromo ward, Bagamoyo Tanzania.

BACKGROUND: Malaria is a highly debilitating and frequently fatal disease of wide distribution. Improper drug storage and rampant self-medication are some of the factors that may contribute to an increase in the development of drug resistance by malaria parasites towards antimalarials. OBJECTIVES: To determine the extent of antimalarial drugs storage, sources and associated factors at household level at Kiromo ward in Bagamoyo, Coast region, Tanzania after the introduction of SP replacing chloroquine as first line. METHODS: A total of 300 households from three villages making up Kiromo ward were included in this study. Swahili version of the questionnaire and a checklist were used in data collection. RESULTS: Of the 300 households visited 25 (8.3%) were found to store antimalarials. The most commonly stored antimalarials were amodiaquine (30.8%) and quinine (34.6%). Most of these were in tablet form (76.9%). The source of these drugs was mostly from dispensaries. Kiromo was the only dispensary in the ward and others were outside the ward. These drugs were stored in special containers for safety. Frequent episodes of illness in the family were given as the most (56%) common reasons for drug storage in the families, followed by distance (20%). There was a statistically significant (p<0.05) association between storage of antimalarial drugs and number of children in the family and presence of a family member with febrile illness. The study further showed that out of 26 different types of antimalarials stored, only 7 (26.9%) had expiry dates on the containers because these were original containers of the drugs. CONCLUSION: The study revealed that few households store antimalarial drugs with amodiaquine and quinine being the most stored. The majority of the households obtained antimalarial drugs from dispensaries. Health education should be given not only to the patients but also the entire general public on the appropriate drug use, safety, expiry dates and appropriate storage. A model dispensary like Kiromo should be implemented in other rural areas.

Determination of kanamycin in serum by solid-phase extraction, pre-capillary derivatization and capillary electrophoresis.

An effective method based on solid-phase extraction (SPE) and capillary electrophoresis (CE) for the determination of kanamycin in human serum was developed and validated. Off-line SPE was employed for the isolation of kanamycin from serum on a carboxypropyl-bonded phase (CBA) weak cation-exchange cartridge. A mixture of 0.2 M borate (pH 10.5)-methanol (50:50, v/v) was used as analyte eluting solvent. After pre-capillary derivatization with o-phthalaldehyde/mercaptoacetic acid reagent, the sample was analyzed by CE with a separation buffer of 30 mM borax, pH 10.0, containing 16% (v/v) methanol. A linear response over the concentration range 5-40 microgram/ml was obtained with a detection limit of 2 microgram/ml. Intra-day and inter-day precision were 6.2 and 10.3% RSD, respectively. Recoveries of approximately 90% were found. For the determination of lower levels of kanamycin (<5 microgram/ml), NH(4)OH (25%, w/v)-methanol (30:70, v/v) was used for analyte elution. After evaporation, reconstitution and derivatization, the sample was analyzed by on-line field-amplified sample stacking (FASS) CE. Good linearity in the concentration range 0.4-5 microgram/ml was obtained with a detection limit of 0.1 microgram/ml. Intra-day and inter-day RSD were 3.4 and 11.2%, respectively. Recoveries of approximately 60% were found. The method was successfully applied to the analysis of kanamycin in sera of tuberculosis patients at peak level and trough level concentrations.

Electrophoretically mediated microanalysis of gentamicin with in-capillary derivatization and UV detection.

This paper describes a system for integration of a one-step-microscale chemical derivatization and analysis by a methodology known as electrophoretically mediated microanalysis (EMMA). Differential electrophoretic mobility between an analyte, reagent, and their product offers EMMA a unique capability to selectively carry out electrophoretic mixing, control product formation, and separation. This system was successfully applied to perform derivatization and separation of the multicomponent aminoglycoside antibiotic gentamicin using 1,2-phthalic dicarboxaldehyde and mercaptoacetic acid as labeling reagents. A multivariate approach based on central composite experimental design was used to optimize the derivative yield. Full automation of the derivatization and analytical procedure, high derivatization efficiency, high sample throughput, and precision are the excellent features of the present method. In addition, this methodology offers short analysis time, as well as selectivity and sensitivity suitable for impurities determination. Separation of gentamicin C1, C1a, C2, C2a, C2b, sisomicin, and several minor components was achieved. For the first time separation and identification of three impurities, namely garamine, 2-deoxystreptamine, and paromamine are described.

Development and validation of a simple capillary zone electrophoresis method for the analysis of kanamycin sulfate with UV detection after pre-capillary derivatization.

Capillary zone electrophoresis was successfully applied to separate eight related substances of kanamycin and several minor unknowns from the main component. Strategies to enhance derivatization and selectivity and to optimize separation parameters involved the application of experimental designs. This chemometrical approach considers main effects as well as interactions of the influential parameters, thus conducting a more thorough investigation of the method than the common step-by-step approach. Central composite face centered designs established optimal separation conditions: 30 mM borax buffer, pH 10.0 containing 16.0% (v/v) methanol and optimal composition of derivatization reagent: 27 mg/ml 1,2-phthalic dicarboxaldehyde and 25 microl/ml mercaptoacetic acid in borate buffer, pH 10.4. The standard curves were linear over the concentration range of 0.007-1.01 mg/ml for the main component and 0.003-0.1 mg/ml for the related substances. The limit of quantitation was 0.14% (m/m) for the related substances and impurities (S/N= 10). The assay method was used to determine the composition of several commercial samples. Quantitative analysis indicates potential usefulness of capillary electrophoresis as an alternative to the assay method prescribed in the European Pharmacopoeia and the United States Pharmacopeia.

Capillary electrophoresis analysis of gentamicin sulphate with UV detection after pre-capillary derivatization with 1,2-phthalic dicarboxaldehyde and mercaptoacetic acid.

A selective, sensitive, and rapid pre-capillary derivatization method for determination of the multicomponent aminoglycoside antibiotic gentamicin is described. The derivatization reagents 1,2-phthalic dicarboxaldehyde and mercaptoacetic acid were used and the thioisoindole derivative was UV detected at 330 nm. A central composite experimental design was performed to optimize selectivity and derivatization conditions. Baseline separation of gentamicin C1, C1a, C2, C2a, C2b, sisomicin and several minor components was achieved with a background electrolyte containing 30 mM sodium tetraborate, 7.5 mM beta-cyclodextrin and 12.5% (v/v) methanol at pH 10. Quantitative analysis was performed and illustrated the potential use of capillary electrophoresis for the identification and quantitation of gentamicin as an alternative to methods prescribed in the United States Pharmacopeia and European Pharmacopoeia.