Nitrogen-doped diamond-like carbon as optically transparent electrode for infrared attenuated total reflection spectroelectrochemistry.

This contribution describes the development of nitrogen-doped diamond-like carbon (N-DLC) thin films for multi-reflection mid-infrared (MIR) attenuated total reflectance (IR-ATR) spectroelectrochemistry. N-DLC coatings were deposited using pulsed laser deposition (PLD) involving the ablation of a high purity graphite target. The DLC matrix was further modified by ablating the target in the presence of nitrogen gas. This technique offers the advantage of depositing thin films at room temperature, thereby enabling coating of temperature-sensitive substrates including e.g., MIR waveguides. The resulting films were analyzed with X-ray photoelectron spectroscopy (XPS), and determined to be composed of carbon, nitrogen, and adventitious oxygen. Raman spectroscopic studies indicate that the addition of nitrogen induces further clustering and ordering of the sp(2)-hybridized carbon phase. The electrochemical activity of PLD fabricated N-DLC films was verified using the Ru(NH(3))(3+/2+) redox couple, and was determined to be comparable with that of other carbon-based electrodes. In situ spectroelectrochemical studies involving N-DLC coated zinc selenide (ZnSe) MIR waveguides provided evidence concerning the oxidation of N-DLC at anodic potentials in 1 M HClO(4) solutions. Finally, the electropolymerization of polyaniline (PAni) was performed at N-DLC-modified waveguide surfaces, which enabled spectroscopic monitoring of the electropolymerization, as well as in situ studying the structural conversion of PAni at different potentials.

A systematic study on the extractability of arsenic species from algal certified reference material IAEA-140/TM (Fucus sp., Sea Plant Homogenate) using methanol/water extractant mixtures.

Using methanol/water mixtures (from pure water to pure methanol), with different desorption and solubility parameters, and varying extractant volume to algal mass (V/m) ratios, the extractability of arsenic species from CRM IAEA-140/TM was investigated. A linear sorption isotherm-based model was developed to process the data obtained with variable volume extraction, allowing the unambiguous deduction of the maximal extractable species concentrations under the specific extraction conditions, even for more stable species. The maximal extractable arsenic fraction ranged from 41 to 68% of the total arsenic concentration in CRM IAEA-140/TM, depending on the extractant composition, with pure methanol giving the lowest extraction yield and pure water giving erratic extractability (probably due to bad wettability). The main arsenic species quantified in the methanol/water extracts were arsenosugars, with arsenosugars 1 (glycerol arsenosugar), 3 (sulfonate arsenosugar) and 4 (sulfate arsenosugar) making up ca. 90% of the maximal extractable arsenic. The rest accounts for DMA (dimethylarsinate), arsenosugar 2 (phosphate arsenosugar) and As(V). There is no clear extraction pattern emerging from the data although it may be seen that extraction of more polar species (e.g. arsenosugar 1) is favoured in pure methanol and less polar more ionic species (e.g. arsenosugar 2 and As(V)) in methanol extractants with a higher water percentage. The precise and highly accurate data may be used for quality control purposes under strictly followed extraction conditions since the extraction is operationally defined. Additionally, the variable volume extraction methodology presented may be applied to other elemental species in other matrices using other extractants. Although this approach does not maximise the absolute extractability but only that which is extractant-specific, experimentators are forewarned that in most cases only a fingerprint of the extractant-specific species is produced unless a quantitative extraction of all species is obtained.

Thio arsenosugars in freshwater mussels from the Danube in Hungary.

In contrast to the large body of data on naturally-occurring arsenic compounds in marine organisms, relatively little is known about arsenic speciation in freshwater biota. We report an investigation using HPLC-ICPMS into the arsenic compounds in five species of freshwater mussels collected from five sites from the Danube in Hungary. Total arsenic concentrations in the mussels ranged from 3.8-12.8 mg As kg(-1). The arsenic speciation patterns were broadly similar for mussels representing each of the five species and five sites, but quite different from those reported for marine mussels. The major extractable arsenicals were two oxo arsenosugars (glycerol sugar and phosphate sugar), and their thio analogues (thio glycerol sugar and thio phosphate sugar). Arsenobetaine, usually the major arsenical in marine organisms, was not a significant compound in the freshwater mussels and was detected in only three of the 11 samples. This is the first report of thio arsenosugars in freshwater biota and suggests that these compounds may be common and widespread naturally-occurring arsenicals.