RESUMO
Present work reports the synthesis of semi-Interpenetrating Network Polymer (semi-IPN) using Gelatin-Gum xanthan hybrid backbone and polyvinyl alcohol in presence of l-tartaric acid and ammonium persulphate as the crosslinker-initiator system. Reaction parameters were optimized with Response Surface Methodology (RSM) in order to maximize the percent gel fraction of the synthesized sample. Polyvinyl alcohol, l-Tartaric acid, ammonium persulphate, reaction temperature, time and pH of the reaction medium were found to make an impact on the percentage gel fraction obtained. Incorporation of polyvinyl alcohol chains onto hybrid backbone and crosslinking between the different polymer chains were confirmed through techniques like FTIR, SEM-EDX and XRD. Semi-IPN was found to be very efficient in the removal of cationic dyes rhodamine-B (70%) and auramine-O (63%) from a mixture with an adsorbent dose of 700 mg, initial concentration of rhodamine-B 6 mgL-1 and auramine-O 26 mgL-1, at an time interval of 22-25 h and 30 °C temp. Further to determine the nature of adsorption Langmuir and Freundlich adsorption isotherm models were studied and it was found that Langmuir adsorption isotherm was the best fit model for the removal of mixture of dyes. Kinetic studies for the sorption of dyes favored the reaction mechanism to occur via a pseudo second order pathway with R2 value about 0.99.
Assuntos
Corantes/isolamento & purificação , Polímeros/química , Indústria Têxtil , Eliminação de Resíduos Líquidos/métodos , Adsorção , Benzofenoneídio/química , Benzofenoneídio/isolamento & purificação , Corantes/química , Gelatina/química , Concentração de Íons de Hidrogênio , Cinética , Polímeros/síntese química , Polissacarídeos Bacterianos/química , Álcool de Polivinil/química , Rodaminas/química , Rodaminas/isolamento & purificação , Espectroscopia de Infravermelho com Transformada de Fourier , Tartaratos/química , Temperatura , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Difração de Raios XRESUMO
Prussian blue analogue potassium metal hexacyanoferrate (KMHCF) nanoparticles Fe4[Fe(CN)6]3 (FeHCF), K2Cu3[Fe(CN)6]2 (KCuHCF), K2Ni[Fe(CN)6]·3H2O (KNiHCF), and K2Co[Fe(CN)6] (KCoHCF) have been synthesized using plant based biosurfactant Aegle marmelos (Bael) and water as a green solvent. It must be emphasized here that no harmful reagent or solvent was used throughout the study. Plant extracts are easily biodegradable and therefore do not cause any harm to the environment. Hence, the proposed method of synthesis of various KMHCF nanoparticles followed a green path. The synthesized nanoparticles were characterized by powder X-ray diffraction (PXRD), Field-Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM), and Fourier Transform Infrared Spectroscopy (FT-IR). MHCF nanoparticles were used for the photocatalytic degradation of toxic dyes like Malachite Green (MG), Eriochrome Black T (EBT), Methyl Orange (MO), and Methylene Blue (MB). Under optimized reaction conditions, maximum photocatalytic degradation was achieved in case of KCuHCF nanoparticles mediated degradation process (MG: 96.06%, EBT: 83.03%, MB: 94.72%, and MO: 63.71%) followed by KNiHCF (MG: 95%, EBT: 80.32%, MB: 91.35%, and MO: 59.42%), KCoHCF (MG: 91.45%, EBT: 78.84%, MB: 89.28%, and MO: 58.20%).
RESUMO
A novel interpenetrating polymer network (IPN) has been synthesized through enzymatic initiation using lipase as initiator, glutaraldehyde as cross-linker, acrylic acid as primary monomer and acrylamide as secondary monomer. Biodegradability of synthesized interpenetrating polymer network was studied through soil burial and composting methods. Synthesized hydrogel was completely degraded within 70 days using composting method, while it was 86.03% degraded within 77 days using soil burial method. This was confirmed by Fourier transform Infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM) techniques. Synthesized interpenetrating polymer network hydrogel was used as a device for controlled release of urea and also act as water releasing device. Their impact on soil fertility and plant growth was also studied. The initial diffusion coefficient has a greater value than the later diffusion coefficient indicating a higher fertilizer release rate during the early stage. Fertilizer release kinetic was also studied which showed Non-Fickian diffusion behavior, as the rate of fertilizer release was comparable to the relaxation time of the synthesized matrix. Synthesized IPN enhance the water uptake capacity up to 6.2% and 7.2% in sandy loam and clay soil, respectively.
RESUMO
This study reports the microwave-assisted synthesis of gum-ghatti (Gg)-grafted poly(acrylamide-co-methacrylic acid) (AAm-co-MAA) hydrogels for the development of biodegradable flocculants and adsorbents. The synthesized hydrogels were characterized using TGA, FTIR and SEM. TGA studies revealed that the synthesized hydrogels were thermally more stable than pristine Gg and exhibited maximum swelling capacity of 1959% at 60°C in neutral pH. The optimal Gg-cl-P(AAm-co-MAA) hydrogel was successfully employed for the removal of saline water from various petroleum fraction-saline emulsions. The maximum flocculation efficiency was achieved in an acidic clay suspension with a 15 mg polymer dose at 40°C. Moreover, the synthesized hydrogel adsorbed 94% and 75% of Pb(2+) and Cu(2+), respectively, from aqueous solutions. Finally, the Gg-cl-P(AAm-co-MAA) hydrogel could be degraded completely within 50 days. In summary, the Gg-cl-P(AAm-co-MAA) hydrogel was demonstrated to have potential for use as flocculants and heavy metal absorbents for industrial waste water treatment.
Assuntos
Hidrogéis/química , Gomas Vegetais/química , Ácidos Polimetacrílicos/química , Adsorção , Bactérias/metabolismo , Cobre/química , Floculação , Hidrogéis/metabolismo , Concentração de Íons de Hidrogênio , Caulim/química , Chumbo/química , Microscopia Eletrônica de Varredura , Petróleo , Gomas Vegetais/metabolismo , Ácidos Polimetacrílicos/metabolismo , Microbiologia do Solo , Espectroscopia de Infravermelho com Transformada de Fourier , TemperaturaRESUMO
Polyaniline/ZnO nanocomposites were prepared by in situ oxidative polymerization of aniline monomer in the presence of different weight percentages of ZnO nanostructures. The steric stabilizer added to prevent the agglomeration of nanostructures in the polymer matrix was found to affect the final properties of the nanocomposite. ZnO nanostructures of various morphologies and sizes were prepared in the absence and presence of sodium lauryl sulphate (SLS) surfactant under different reaction conditions like in the presence of microwave radiation (microwave oven), under pressure (autoclave), under vacuum (vacuum oven), and at room temperature (ambient condition). The conductivity of these synthesized nanocomposites was evaluated using two-probe method and the effect of concentration of ZnO nanostructures on conductivity was observed. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and UV-visible (UV-VIS) spectroscopy techniques were used to characterize nanocomposites. The optical energy band gap of the nanocomposites was calculated from absorption spectra and ranged between 1.5 and 3.21 eV. The reported values depicted the blue shift in nanocomposites as compared to the band gap energies of synthesized ZnO nanostructures. The present work focuses on the one-step synthesis and potential use of PANI/ZnO nanocomposite in molecular electronics as well as in optical devices.
Assuntos
Compostos de Anilina/química , Nanocompostos/química , Óxido de Zinco/química , Condutividade Elétrica , Nanocompostos/ultraestrutura , PolimerizaçãoRESUMO
Biodegradation studies of Gum ghatti (Gg) and acrylamide-co-acrylic acid based flocculants [Gg-cl-poly(AAm-co-AA)] have been reported using the soil composting method. Gg-cl-poly(AAm-co-AA) was found to degrade 89.76% within 60 days. The progress of biodegradation at each stage was monitored through FT-IR and SEM. Polymer was synthesized under pressure using potassium persulphate-ascorbic acid as a redox initiator and N,N'-methylene-bis-acrylamide as a crosslinker. Synthesized polymer was found to show pH, temperature and ionic strength of the cations dependent swelling behavior. Gg-cl-poly(AAm-co-AA) was utilized for the selective absorption of saline from different petroleum fraction-saline emulsions. The flocculation efficiency of the polymer was studied as a function of polymer dose, temperature and pH of the solution. Gg-cl-poly(AAm-co-AA) showed maximum flocculation efficiency with 20 mol L(-1) polymer dose in acidic medium at 50 °C.
Assuntos
Acrilamidas/química , Acrilamidas/metabolismo , Gomas Vegetais/metabolismo , Absorção , Floculação , Concentração de Íons de Hidrogênio , Concentração Osmolar , Petróleo/análise , TemperaturaRESUMO
Biodegradable flocculants of Gum ghatti (Gg) with acrylamide (AAm) were prepared through graft co-polymerization technique using potassium persulphate (KPS)-ascorbic acid (ABC) redox pair as initiator and N,N'-methylene-bis-acrylamide (MBA) as a crosslinker. Gg-cl-poly(AAm) was found to exhibit pH and temperature responsive swelling behavior. Maximum flocculation efficiency of Gg-cl-poly(AAm) was observed with 15 mg L(-1) polymer dose in acidic medium at 50°C. Biodegradation studies of Gg and Gg-cl-poly(AAm) were done using composting method. Gg was found to degrade within 20 days, whereas, Gg-cl-poly(AAm) was found to degrade 88.18% within 60 days. Different stages of bio-degradation were characterized through FT-IR and SEM techniques.
Assuntos
Hidrogéis/química , Gomas Vegetais/química , Acrilamida/química , Ácido Ascórbico/química , Biodegradação Ambiental , Floculação , Concentração de Íons de Hidrogênio , Microscopia Eletrônica de Varredura , Concentração Osmolar , Polimerização , Compostos de Potássio/química , Espectroscopia de Infravermelho com Transformada de Fourier , Sulfatos/química , Propriedades de Superfície , TermogravimetriaRESUMO
In this paper, corn starch based green composites reinforced with graft copolymers of Saccharum spontaneum L. (Ss) fiber and methyl methacrylates (MMA) and its mixture with acrylamide (AAm), acrylonitrile (AN), acrylic acid (AA) were prepared. Resorcinol-formaldehyde (Rf) was used as the cross-linking agent in corn starch matrix and different physico-chemical, thermal and mechanical properties were evaluated. The matrix and composites were found to be thermally more stable than the natural corn starch backbone. Further the matrix and composites were subjected for biodegradation studies through soil composting method. Different stages of biodegradation were evaluated through FT-IR and scanning electron microscopic (SEM) techniques. S. spontaneum L fiber-reinforced composites were found to exhibit better tensile strength. On the other hand Ss-g-poly (MMA) reinforced composites showed maximum compressive strength and wear resistance than other graft copolymers reinforced composite and the basic matrix.
Assuntos
Polímeros/química , Saccharum/química , Amido/química , Zea mays/química , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de Fourier , Resistência à TraçãoRESUMO
The petroleum ether, chloroform, alcoholic and aqueous extracts of Arnebia euchroma roots (500 mg/kg, orally each) were found to exhibit maximal edema inhibition (61.2%, 45%, 27.5% and 60%, respectively) against carrageenin-induced rat-paw edema at 300 min interval. The activity shown by different extracts was comparable to that shown by the reference drug, ibuprofen (50 mg/kg, p.o., 61.6% inhibition, 200 min).