Gum xanthan-psyllium-cl-poly(acrylic acid-co-itaconic acid) based adsorbent for effective removal of cationic and anionic dyes: Adsorption isotherms, kinetics and thermodynamic studies.

The present work highlights the synthesis of the adsorbent based on Gum xanthan-psyllium hybrid backbone graft co-polymerized with polyacrylic acid-co-polyitaconic acid chains for the rapid sequestration of auramine-O (Aur-O) and eriochrome black-T (EBT) dyes from the aqueous fluid. The excellent dye removal efficiency of 90.53% for EBT and 95.63% for Aur-O was found at initial dye concentration of 30mgL-1 (EBT) and 15 mgL-1 (Aur-O) 40mL-1 with an adsorbent dose of 600mg within time duration of 5h and 323K temp. The adsorption isotherm data fitted well with Langmuir isotherm and Freundlich isotherm for Aur-O and EBT dyes (R2 ≥ 0.90), respectively. The adsorption kinetics depicted that pseudo-second order kinetics was followed simultaneously with intra-particle diffusion for both the dyes. Thermodynamic parameters such as ΔG°, ΔH° and ΔS° were also calculated and confirmed the spontaneity, randomness and endothermic nature of the adsorption process. Further, the adsorbent exhibited good recyclability efficiency for the capture of Aur-O and EBT from aqueous solution with minimal activity decline after six and three cycles, respectively. So, the synthesized adsorbent could be used successfully by the textile industries for the treatment of dye contaminated water with excellent competency.

Biodegradable and conducting hydrogels based on Guar gum polysaccharide for antibacterial and dye removal applications.

Conducting hydrogels possessing antibacterial activity were developed using a two-step free-radical aqueous polymerization method to incorporate polyaniline chains into an adsorbent Guar gum/acrylic acid hydrogel network. The material properties of the synthesized samples were characterized using FTIR spectroscopy, thermal analysis and scanning electron microscopy techniques. Conducting hydrogels were tested for antibacterial activities against gram-positive Staphylococcus aureus and gram-negative Escherichia coli bacteria and demonstrated antibacterial activity. Synthesized hydrogel samples can be potential adsorbent materials for dye removal applications.

Guar gum based biodegradable, antibacterial and electrically conductive hydrogels.

Guar gum-polyacrylic acid-polyaniline based biodegradable electrically conductive interpenetrating network (IPN) structures were prepared through a two-step aqueous polymerization. Hexamine and ammonium persulfate (APS) were used as a cross linker-initiator system to crosslink the poly(AA) chains on Guar gum (Ggum) backbone. Optimum reaction conditions for maximum percentage swelling (7470.23%) were time (min) = 60; vacuum (mmHg) = 450; pH = 7.0; solvent (mL) = 27.5; [APS] (mol L(-1)) = 0.306 × 10(-1); [AA] (mol L(-1)) = 0.291 × 10(-3) and [hexamine] (mol L(-1))=0.356 × 10(-1). The semi-interpenetrating networks (semi-IPNs) were converted into IPNs through impregnation of polyaniline chains under acidic and neutral conditions. Fourier transform infra-red spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) techniques were used to characterize the semi-IPNs and IPNs. Synthesized semi-IPNs and IPNs were further evaluated for moisture retention in different soils, antibacterial and biodegradation behavior.