RESUMO
The physicochemical properties of van der Waals (vdW) heterostructures are driven by the delicate interactions between the individual layers in a multilayer stack. While addressing the monolayers of different compositions in the multilayer is feasible, exploring the intrinsic properties of the monolayers of the same composition within a multilayer is extremely challenging. This becomes of utmost importance in energy conversion and storage concepts based on layered vdW materials. For example, the charge distribution on the individual layers can be determined, and the behavior can be disentangled. We introduce sulfur isotope labeling as a powerful tool for separately addressing monolayers in vdW heterostructures composed of transition metal disulfides. Using chemical vapor deposition (CVD), we prepared monolayers of MoS2 using natural sulfur (NatS) and 34sulfur (34S) as precursors. Artificial bilayers were then prepared by transferring Mo34S2 onto MoNatS2. Thanks to the different masses of NatS and 34S, we were able to disentangle the spectral fingerprints of phonons and excitons in the two layers using Raman and photoluminescence microspectroscopy. Also, the charge distribution on the individual layers was revealed through Raman spectra analysis. Our work thus provides a different perspective for understanding the functionalities and optical properties of smart architecture based on transition metal chalcogenides.
RESUMO
Ultrafast high-capacity lithium-ion batteries are extremely desirable for portable electronic devices, where Si is the most promising alternative to the conventional graphite anode due to its very high theoretical capacity. However, the low electronic conductivity and poor Li-diffusivity limit its rate capability. Moreover, high volume expansion/contraction upon Li-intake/uptake causes severe pulverization of the electrode, leading to drastic capacity fading. Here, interface and morphology-engineered amorphous Si matrix is being reported utilizing a few-layer vertical graphene (VG) buffer layer to retain high capacity at both slow and fast (dis)charging rates. The flexible mechanical support of VG due to the van-der-Waals interaction between the graphene layers, the weak adhesion between Si and graphene, and the highly porous geometry mitigated stress, while the three-dimensional mass loading enhanced specific capacity. Additionally, the high electronic conductivity of VG boosted rate-capability, resulting in a reversible gravimetric capacity of ≈1270 mAh g-1 (areal capacity of ≈37 µAh cm-2) even after 100 cycles at an ultrafast cycling rate of 20C, which provides a fascinating way for conductivity and stress management to obtain high-performance storage devices.
RESUMO
Recent progress in polarization-resolved photodetection based on low-symmetry 2D materials has formed the basis of cutting-edge optoelectronic devices, including quantum optical communication, 3D image processing, and sensing applications. Here, we report an optical polarization-resolving photodetector (PD) fabricated from multilayer semiconducting CrSBr single crystals with high structural anisotropy. We have demonstrated self-powered photodetection due to the formation of Schottky junctions at the Au-CrSBr interfaces, which also caused the photocurrent to display a position-sensitive and binary nature. The self-biased CrSBr PD showed a photoresponsivity of â¼0.26 mA/W with a detectivity of 3.4 × 108 Jones at 514 nm excitation of fluency (0.42 mW/cm2) under ambient conditions. The optical polarization-induced photoresponse exhibits a large dichroic ratio of 3.4, while the polarization is set along the a- and the b-axes of single-crystalline CrSBr. The PD also showed excellent stability, retaining >95% of the initial photoresponsivity in ambient conditions for more than five months without encapsulation. Thus, we demonstrate CrSBr as a fascinating material for ultralow-powered optical polarization-resolving optoelectronic devices for cutting-edge technology.
RESUMO
Two-dimensional transition metal nitrides offer intriguing possibilities for achieving novel electronic and mechanical functionality owing to their distinctive and tunable bonding characteristics compared to other 2D materials. We demonstrate here the enabling effects of strong bonding on the morphology and functionality of 2D tungsten nitrides. The employed bottom-up synthesis experienced a unique substrate stabilization effect beyond van-der-Waals epitaxy that favored W5N6 over lower metal nitrides. Comprehensive structural and electronic characterization reveals that monolayer W5N6 can be synthesized at large scale and shows semimetallic behavior with an intriguing indirect band structure. Moreover, the material exhibits exceptional resilience against mechanical damage and chemical reactions. Leveraging these electronic properties and robustness, we demonstrate the application of W5N6 as atomic-scale dry etch stops that allow the integration of high-performance 2D materials contacts. These findings highlight the potential of 2D transition metal nitrides for realizing advanced electronic devices and functional interfaces.
RESUMO
In this work, we investigated cyclohexane oxidative dehydrogenation (ODH) catalyzed by cobalt ferrite nanoparticles supported on reduced graphene oxide (RGO). We aim to identify the active sites that are specifically responsible for full and partial dehydrogenation using advanced spectroscopic techniques such as X-ray photoelectron emission microscopy (XPEEM) and X-ray photoelectron spectroscopy (XPS) along with kinetic analysis. Spectroscopically, we propose that Fe3+/Td sites could exclusively produce benzene through full cyclohexane dehydrogenation, while kinetic analysis shows that oxygen-derived species (O*) are responsible for partial dehydrogenation to form cyclohexene in a single catalytic sojourn. We unravel the dynamic cooperativity between octahedral and tetrahedral sites and the unique role of the support in masking undesired active (Fe3+/Td) sites. This phenomenon was strategically used to control the abundance of these species on the catalyst surface by varying the particle size and the wt % content of the nanoparticles on the RGO support in order to control the reaction selectivity without compromising reaction rates which are otherwise extremely challenging due to the much favorable thermodynamics for complete dehydrogenation and complete combustion under oxidative conditions.
RESUMO
Electrostatic gating using electrolytes is a powerful approach for controlling the electronic properties of atomically thin two-dimensional materials such as graphene. However, the role of the ionic type, size, and concentration and the resulting gating efficiency is unclear due to the complex interplay of electrochemical processes and charge doping. Understanding these relationships facilitates the successful design of electrolyte gates and supercapacitors. To that end, we employ in situ Raman microspectroscopy combined with electrostatic gating using various concentrated aqueous electrolytes. We show that while the ionic type and concentration alter the initial doping state of graphene, they have no measurable influence over the rate of the doping of graphene with applied voltage in the high ionic strength limit of 3-15 M. Crucially, unlike for conventional dielectric gates, a large proportion of the applied voltage contributes to the Fermi level shift of graphene in concentrated electrolytes. We provide a practical overview of the doping efficiency for different gating systems.
RESUMO
We investigate the intrinsic strain associated with the coupling of twisted MoS2/MoSe2 heterobilayers by combining experiments and molecular dynamics simulations. Our study reveals that small twist angles (between 0 and 2°) give rise to considerable atomic reconstructions, large moiré periodicities, and high levels of local strain (with an average value of â¼1%). Moreover, the formation of moiré superlattices is assisted by specific reconstructions of stacking domains. This process leads to a complex strain distribution characterized by a combined deformation state of uniaxial, biaxial, and shear components. Lattice reconstruction is hindered with larger twist angles (>10°) that produce moiré patterns of small periodicity and negligible strains. Polarization-dependent Raman experiments also evidence the presence of an intricate strain distribution in heterobilayers with near-0° twist angles through the splitting of the E2g1 mode of the top (MoS2) layer due to atomic reconstruction. Detailed analyses of moiré patterns measured by AFM unveil varying degrees of anisotropy in the moiré superlattices due to the heterostrain induced during the stacking of monolayers.
RESUMO
Hybrid layered materials assembled from atomically thin crystals and small molecules bring great promises in pushing the current information and quantum technologies beyond the frontiers. We demonstrate here a class of layered valley-spin hybrid (VSH) materials composed of a monolayer two-dimensional (2D) semiconductor and double-decker single molecule magnets (SMMs). We have materialized a VSH prototype by thermal evaporation of terbium bis-phthalocyanine onto a MoS2 monolayer and revealed its composition and stability by both microscopic and spectroscopic probes. The interaction of the VSH components gives rise to the intersystem crossing of the photogenerated carriers and moderate p-doping of the MoS2 monolayer, as corroborated by the density functional theory calculations. We further explored the valley contrast by helicity-resolved photoluminescence (PL) microspectroscopy carried out down to liquid helium temperatures and in the presence of the external magnetic field. The most striking feature of the VSH is the enhanced A exciton-related valley emission observed at the out-of-resonance condition at room temperature, which we elucidated by the proposed nonradiative energy drain transfer mechanism. Our study thus demonstrates the experimental feasibility and great promises of the ultrathin VSH materials with chiral light emission, operable by physical fields for emerging opto-spintronic, valleytronic, and quantum information concepts.
RESUMO
Tailoring the physicochemical properties of graphene through functionalization remains a major interest for next-generation technological applications. However, defect formation due to functionalization greatly endangers the intrinsic properties of graphene, which remains a serious concern. Despite numerous attempts to address this issue, a comprehensive analysis has not been conducted. This work reports a two-step fluorination process to stabilize the fluorinated graphene and obtain control over the fluorination-induced defects in graphene layers. The structural, electronic and isotope-mass-sensitive spectroscopic characterization unveils several not-yet-resolved facts, such as fluorination sites and CF bond stability in partially-fluorinated graphene (F-SLG). The stability of fluorine has been correlated to fluorine co-shared between two graphene layers in fluorinated-bilayer-graphene (F-BLG). The desorption energy of co-shared fluorine is an order of magnitude higher than the CF bond energy in F-SLG due to the electrostatic interaction and the inhibition of defluorination in the F-BLG. Additionally, F-BLG exhibits enhanced light-matter interaction, which has been utilized to design a proof-of-concept field-effect phototransistor that produces high photocurrent response at a time <200 µs. Thus, the study paves a new avenue for the in-depth understanding and practical utilization of fluorinated graphenic carbon.
RESUMO
TiO2 is the most studied photocatalyst because of its non-toxicity, chemical stability, and low cost. However, the problem of TiO2 is its low activity in the visible region of the spectrum. In this study, we focused on the preparation of composite photocatalytic materials with altered light absorption properties. TiO2 P25 and various metal oxides were mechanically joined by ball-milling and immobilized on glass plates. The prepared samples were evaluated based on their ability to degrade NO in gas phase. The formation of undesirable byproducts was also investigated. Four best performing composites were later chosen, characterized, and further evaluated under various conditions. According to their performance, the metal oxide additives can be divided into three groups. P25/Fe2O3 showed the most promising results-an increase in overall deNOx activity under modified ISO conditions and altered selectivity (less NO2 is formed) under both simulated outdoor and simulated indoor conditions. On the other hand, P25/V2O5 composite showed negligible photocatalytic activity. The intermediate group includes P25/WO3 and P25/ZnO photocatalysts, whose performances are similar to those of pristine P25.
Assuntos
Óxidos , Titânio , Titânio/química , CatáliseRESUMO
Contact resistance between electrically connected parts of electronic elements can negatively affect their resulting properties and parameters. The contact resistance is influenced by the physicochemical properties of the connected elements and, in most cases, the lowest possible value is required. The issue of contact resistance is also addressed in connection with the increasingly frequently used carbon allotropes. This work aimed to determine the factors that influence contact resistance between graphene prepared by chemical vapour deposition and pre-patterned Cu and Au electrodes onto which graphene is subsequently transferred. It was found that electrode surface treatment methods affect the resistance between Cu and graphene, where contact resistance varied greatly, with an average of 1.25 ± 1.54 kΩ, whereas for the Au electrodes, the deposition techniques did not influence the resulting contact resistance, which decreased by almost two orders of magnitude compared with the Cu electrodes, to 0.03 ± 0.01 kΩ.
RESUMO
Low cycling stability is one of the most crucial issues in rechargeable batteries. Herein, we study the effects of a simple ultrasound treatment of graphite for the reversible (de)intercalation of a ClO4- anion from a 2.4 M Al(ClO4)3 aqueous solution. We demonstrate that the ultrasound-treated graphite offers the improved reversibility of the ClO4- anion (de)intercalation compared with the untreated samples. The ex situ and in situ Raman spectroelectrochemistry and X-ray diffraction analysis of the ultrasound-treated materials shows no change in the interlayer spacing, a mild increase in the stacking order, and a large increase in the amount of defects in the lattice accompanied by a decrease in the lateral crystallite size. The smaller flakes of the ultrasonicated natural graphite facilitate the improved reversibility of the ClO4- anion electrochemical (de)intercalation and a more stable electrochemical performance with a cycle life of over 300 cycles.
RESUMO
It is well-known that structural defects play a decisive role in electrochemical behavior of atomically thin materials, where all the defects are directly accessible by the electrolyte. However, the vast majority of experimental techniques do not allow disentanglement of the processes at the edges/defects from those at the intact basal plane. Therefore, to address this issue, we introduce a localized spectroelectrochemical method featuring a microdroplet electrochemical cell with simultaneous Raman spectroscopy monitoring. The electrochemical and spectral responses of the basal planes of monolayer graphene samples with varying levels of disorder were compared. Two contributions, stemming from the intact and defective areas on the surface, respectively, were discovered both in the Raman G band shifts and cyclic voltammetry using the hexaammineruthenium complex. Consequently, two independent electron transfer processes of slower and faster rates coexist in one sample, but they are restricted to the defect-free and defect-rich areas, respectively.
RESUMO
Heterogeneous photocatalysis of TiO2 is one of the most efficient advanced oxidation processes for water and air purification. Here, we prepared hierarchical TiO2 layers (Spikelets) by hollow-cathode discharge sputtering and tested their photocatalytic performance in the abatement of inorganic (NO, NO2) and organic (4-chlorophenol) pollutant dispersed in air and water, respectively. The structural-textural properties of the photocatalysts were determined via variety of physico-chemical techniques (XRD, Raman spectroscopy, SEM, FE-SEM. DF-TEM, EDAX and DC measurements). The photocatalysis was carried out under conditions similar to real environment conditions. Although the abatement of NO and NO2 was comparable with that of industrial benchmark Aeroxide® TiO2 P25, the formation of harmful nitrous acid (HONO) product on the Spikelet TiO2 layers was suppressed. Similarly, in the decontamination of water by organics, the mineralization of 4-chlorophenol on Spikelet layers was interestingly the same, although their reaction rate constant was three-times lower. The possible explanation may be the more than half-magnitude order higher external quantum efficacy (EQE) compared to that of the reference TiO2 P25 layer. Therefore, such favorable kinetics and reaction selectivity, together with feasible scale-up, make the hierarchical TiO2 layers very promising photocatalyst which can be used for environmental remediation.
RESUMO
The monolayer character of two-dimensional materials predestines them for application as active layers of sensors. However, their inherent high sensitivity is always accompanied by a low selectivity. Chemical functionalization of two-dimensional materials has emerged as a promising way to overcome the selectivity issues. Here, we demonstrate efficient graphene functionalization with carbohydrate ligands-chitooligomers, which bind proteins of the lectin family with high selectivity. Successful grafting of a chitooligomer library was thoroughly characterized, and glycan binding to wheat germ agglutinin was studied by a series of methods. The results demonstrate that the protein quaternary structure remains intact after binding to the functionalized graphene, and that the lectin can be liberated from the surface by the addition of a binding competitor. The chemoenzymatic assay with a horseradish peroxidase conjugate also confirmed the intact catalytic properties of the enzyme. The present approach thus paves the way towards graphene-based sensors for carbohydrate-lectin binding.
Assuntos
Grafite/química , Lectinas/metabolismo , Polissacarídeos/química , Peroxidase do Rábano Silvestre , Lectinas/análise , Polissacarídeos/metabolismo , Ligação Proteica , Estrutura Quaternária de ProteínaRESUMO
Nanocomposites of graphene materials and conducting polymers have been extensively studied as promising materials for electrodes of supercapacitors. Here, we present a graphene/polyaniline heterostructure consisting of a CVD-graphene and polyaniline monolayer and its electrochemical operation in a supercapacitor. The synthesis employs functionalization of graphene by p-phenylene sulfonic groups and oxidative polymerization of anilinium by ammonium persulfate under reaction conditions, providing no bulk polyaniline. Scanning electron microscopy, atomic force microscopy, and Raman spectroscopy showed the selective formation of polyaniline on the graphene. In situ Raman spectroelectrochemistry and cyclic voltammetry (both in a microdroplet setup) confirm the reversibility of polyaniline redox transitions and graphene electrochemical doping. After an increase within the initial 200 cycles due to the formation of benzoquinone-hydroquinone defects in polyaniline, the specific areal capacitance remained for 2400 cycles with ±1% retention at 21.2 µF cm-2, one order of magnitude higher than the capacitance of pristine graphene.
RESUMO
We investigated the heating abilities of magnetic nanoparticles (MNPs) in a high-frequency magnetic field (MF) as a function of surface coating and size. The cobalt ferrite MNPs were obtained by a hydrothermal method in a water-oleic acid-ethanol system, yielding MNPs with mean diameter of about 5 nm, functionalized with the oleic acid. By applying another cycle of hydrothermal synthesis, we obtained MNPs with about one nm larger diameter. In the next step, the oleic acid was exchanged for 11-maleimidoundecanoic acid or 11-(furfurylureido)undecanoic acid. For the heating experiments, all samples were dispersed in the same solvent (dichloroethane) in the same concentration and the heating performance was studied in a broad interval of MF frequencies (346-782 kHz). The obtained results enabled us to disentangle the impact of the hydrodynamic, structural, and magnetic parameters on the overall heating capabilities. We also demonstrated that the specific power absorption does not show a monotonous trend within the series in the investigated interval of temperatures, pointing to temperature-dependent competition of the Brownian and Néel contributions in heat release.
RESUMO
Due to weak light-matter interaction, standard chemical vapor deposition (CVD)/exfoliated single-layer graphene-based photodetectors show low photoresponsivity (on the order of mA/W). However, epitaxial graphene (EG) offers a more viable approach for obtaining devices with good photoresponsivity. EG on 4H-SiC also hosts an interfacial buffer layer (IBL), which is the source of electron carriers applicable to quantum optoelectronic devices. We utilize these properties to demonstrate a gate-free, planar EG/4H-SiC-based device that enables us to observe the positive photoresponse for (405-532) nm and negative photoresponse for (632-980) nm laser excitation. The broadband binary photoresponse mainly originates from the energy band alignment of the IBL/EG interface and the highly sensitive work function of the EG. We find that the photoresponsivity of the device is > 10 A/W under 405 nm of power density 7.96 mW/cm2 at 1 V applied bias, which is three orders of magnitude greater than the obtained values of CVD/exfoliated graphene and higher than the required value for practical applications. These results path the way for selective light-triggered logic devices based on EG and can open a new window for broadband photodetection.
RESUMO
Monolayer and isotopically labelled bilayer graphene membranes were prepared on grids for transmission electron microscopy (TEM). In order to create defects in the graphene layers in a controlled way, we studied the sensitivity of the individual graphene layers to the oxygen plasma treatment. We tested samples with different configurations by varying the order of the transfer of layers and changing the orientation of the samples with respect to the plasma chamber. Using Raman spectroscopy, HRTEM and X-ray photoelectron spectroscopy, we demonstrated defect formation and determined the quantity and chemical composition of the defects. By keeping the sample structure and the setup of the experiment unchanged, the significant role of the sample orientation with respect to the chamber was demonstrated. The effect was accounted for by the variation of the accessibility of the sample surface for the reactive species. Therefore, this effect can be used to control the degree of damage in each layer, resulting in differing numbers of defects present on each side of the sample.
RESUMO
Porous graphene with catalytically active ceria nanometre-size particles were prepared using pulsed laser deposition (PLD) on graphene produced through chemical vapour deposition (CVD). The reported process provided porous graphene containing ceria nanoparticles as confirmed by HR TEM and XPS. Isotopically labelled 13 C graphene was employed to study desorption of the species containing carbon. Methanol adsorption was utilised to probe the nature of the catalytic activity of prepared ceria decorated graphene. The important role of graphene support for the stabilization of reduced ceria nanoparticles was finally confirmed. Increased dehydrogenation activity of graphene with ceria nanoparticles leading to CO and H2 formation was demonstrated.