Intrinsic Magnetic (EuIn)As Nanowire Shells with a Unique Crystal Structure.

In the pursuit of magneto-electronic systems nonstoichiometric magnetic elements commonly introduce disorder and enhance magnetic scattering. We demonstrate the growth of (EuIn)As shells, with a unique crystal structure comprised of a dense net of Eu inversion planes, over InAs and InAs1-xSbx core nanowires. This is imaged with atomic and elemental resolution which reveal a prismatic configuration of the Eu planes. The results are supported by molecular dynamics simulations. Local magnetic and susceptibility mappings show magnetic response in all nanowires, while a subset bearing a DC signal points to ferromagnetic order. These provide a mechanism for enhancing Zeeman responses, operational at zero applied magnetic field. Such properties suggest that the obtained structures can serve as a preferred platform for time-reversal symmetry broken one-dimensional states including intrinsic topological superconductivity.

Magnetic memory and spontaneous vortices in a van der Waals superconductor.

Doped Mott insulators exhibit some of the most intriguing quantum phases of matter, including quantum spin liquids, unconventional superconductors and non-Fermi liquid metals1-3. Such phases often arise when itinerant electrons are close to a Mott insulating state, and thus experience strong spatial correlations. Proximity between different layers of van der Waals heterostructures naturally realizes a platform for experimentally studying the relationship between localized, correlated electrons and itinerant electrons. Here we explore this relationship by studying the magnetic landscape of tantalum disulfide 4Hb-TaS2, which realizes an alternating stacking of a candidate spin liquid and a superconductor4. We report on a spontaneous vortex phase whose vortex density can be trained in the normal state. We show that time-reversal symmetry is broken in the normal state, indicating the presence of a magnetic phase independent of the superconductor. Notably, this phase does not generate ferromagnetic signals that are detectable using conventional techniques. We use scanning superconducting quantum interference device microscopy to show that it is incompatible with ferromagnetic ordering. The discovery of this unusual magnetic phase illustrates how combining superconductivity with a strongly correlated system can lead to unexpected physics.

Anomalous transport in high-mobility superconducting SrTiO3 thin films.

The study of subtle effects on transport in semiconductors requires high-quality epitaxial structures with low defect density. Using hybrid molecular beam epitaxy (MBE), SrTiO3 films with a low-temperature mobility exceeding 42,000 cm2 V-1 s-1 at a low carrier density of 3 × 1017 cm-3 were achieved. A sudden and sharp decrease in residual resistivity accompanied by an enhancement in the superconducting transition temperature were observed across the second Lifshitz transition where the third band becomes occupied, revealing dominant intraband scattering. These films further revealed an anomalous behavior in the Hall carrier density as a consequence of the antiferrodistortive (AFD) transition and the temperature dependence of the Hall scattering factor. Using hybrid MBE growth, phenomenological modeling, temperature-dependent transport measurements, and scanning superconducting quantum interference device imaging, we provide critical insights into the important role of inter- versus intraband scattering and of AFD domain walls on normal-state and superconducting properties of SrTiO3.

Non-universal current flow near the metal-insulator transition in an oxide interface.

In systems near phase transitions, macroscopic properties often follow algebraic scaling laws, determined by the dimensionality and the underlying symmetries of the system. The emergence of such universal scaling implies that microscopic details are irrelevant. Here, we locally investigate the scaling properties of the metal-insulator transition at the LaAlO3/SrTiO3 interface. We show that, by changing the dimensionality and the symmetries of the electronic system, coupling between structural and electronic properties prevents the universal behavior near the transition. By imaging the current flow in the system, we reveal that structural domain boundaries modify the filamentary flow close to the transition point, preventing a fractal with the expected universal dimension from forming.

Ferroelectric Exchange Bias Affects Interfacial Electronic States.

In polar oxide interfaces phenomena such as superconductivity, magnetism, 1D conductivity, and quantum Hall states can emerge at the polar discontinuity. Combining controllable ferroelectricity at such interfaces can affect the superconducting properties and sheds light on the mutual effects between the polar oxide and the ferroelectric oxide. Here, the interface between the polar oxide LaAlO3 and the ferroelectric Ca-doped SrTiO3 is studied by means of electrical transport combined with local imaging of the current flow with the use of scanning a superconducting quantum interference device (SQUID). Anomalous behavior of the interface resistivity is observed at low temperatures. The scanning SQUID maps of the current flow suggest that this behavior originates from an intrinsic bias induced by the polar LaAlO3 layer. Such intrinsic bias combined with ferroelectricity can constrain the possible structural domain tiling near the interface. The use of this intrinsic bias is recommended as a method of controlling and tuning the initial state of ferroelectric materials by the design of the polar structure. The hysteretic dependence of the normal and the superconducting state properties on gate voltage can be utilized in multifaceted controllable memory devices.

Sensitive Readout for Microfluidic High-Throughput Applications using Scanning SQUID Microscopy.

Microfluidic chips provide a powerful platform for high-throughput screening of diverse biophysical systems. The most prevalent detection methods are fluorescence based. Developing new readout techniques for microfluidics focusing on quantitative information in the low signal regime is desirable. In this work, we combine the well-established immunoassay approach, with magnetic nanoparticles, with a highly sensitive magnetic imaging technique. We offer to integrate a microfluidic array into a scanning superconducting quantum interference device (SQUID) microscope, to image nanoparticles that were moved through the microfluidic device. We demonstrate the technique on protein-protein interactions (PPI). We compare sensitivity to that of a conventional readout, quantify the amount of interactions, and demonstrate 0.1 atto-mole sensitivity. Our work serves as a proof of concept that will promote the development of a new set of eyes, a stable usable microfluidic-scanning SQUID microscopy.

Scanning SQUID microscopy in a cryogen-free cooler.

Scanning superconducting quantum interference device (SQUID) microscopy is a powerful tool for investigating electronic states at surfaces and interfaces by mapping their magnetic signal. SQUID operation requires cryogenic temperatures, which are typically achieved by immersing the cryostat in liquid helium. Making a transition to cryogen free systems is desirable, but has been challenging, as electric noise and vibrations are increased in such systems. We report on the successful operation of a scanning SQUID microscope in a modified Montana Instruments cryogen-free cooler with a base temperature of 4.3 K. We demonstrate scanning SQUID measurements with flux noise performance comparable to a wet system and correlate the sensor-sample vibrations to the cryocooler operation frequencies. In addition, we demonstrate successful operation in a variety of SQUID operation modes, including mapping static magnetic fields, measurement of local susceptibility, and spatial mapping of current flow distribution.

Scanning SQUID View of Oxide Interfaces.

The emergence of states of matter in low-dimensional systems is one of the most intriguing topics in condensed matter physics. Interfaces between nonmagnetic, insulating oxides are found to give rise to surprising behaviors, such as metallic conductivity, superconductivity, and magnetism. Sensitive, noninvasive local characterization tools are essential for understanding the electronic and magnetic behavior of these systems. Here, the scanning superconducting quantum interference device (SQUID) technique for local magnetic imaging is described and its contribution to the field of oxide interfaces is reviewed.

Imaging and tuning polarity at SrTiO3 domain walls.

Electrostatic fields tune the ground state of interfaces between complex oxide materials. Electronic properties, such as conductivity and superconductivity, can be tuned and then used to create and control circuit elements and gate-defined devices. Here we show that naturally occurring twin boundaries, with properties that are different from their surrounding bulk, can tune the LaAlO3/SrTiO3 interface 2DEG at the nanoscale. In particular, SrTiO3 domain boundaries have the unusual distinction of remaining highly mobile down to low temperatures, and were recently suggested to be polar. Here we apply localized pressure to an individual SrTiO3 twin boundary and detect a change in LaAlO3/SrTiO3 interface current distribution. Our data directly confirm the existence of polarity at the twin boundaries, and demonstrate that they can serve as effective tunable gates. As the location of SrTiO3 domain walls can be controlled using external field stimuli, our findings suggest a novel approach to manipulate SrTiO3-based devices on the nanoscale.

Scanning SQUID Study of Vortex Manipulation by Local Contact.

Local, deterministic manipulation of individual vortices in type 2 superconductors is challenging. The ability to control the position of individual vortices is necessary in order to study how vortices interact with each other, with the lattice, and with other magnetic objects. Here, we present a protocol for vortex manipulation in thin superconducting films by local contact, without applying current or magnetic field. Vortices are imaged using a scanning superconducting quantum interference device (SQUID), and vertical stress is applied to the sample by pushing the tip of a silicon chip into the sample, using a piezoelectric element. Vortices are moved by tapping the sample or sweeping it with the silicon tip. Our method allows for effective manipulation of individual vortices, without damaging the film or affecting its topography. We demonstrate how vortices were relocated to distances of up to 0.8 mm. The vortices remained stable at their new location up to five days. With this method, we can control vortices and move them to form complex configurations. This technique for vortex manipulation could also be implemented in applications such as vortex based logic devices.

Anisotropic Transport at the LaAlO3/SrTiO3 Interface Explained by Microscopic Imaging of Channel-Flow over SrTiO3 Domains.

Oxide interfaces, including the LaAlO3/SrTiO3 interface, have been a subject of intense interest for over a decade due to their rich physics and potential as low-dimensional nanoelectronic systems. The field has reached the stage where efforts are invested in developing devices. It is critical now to understand the functionalities and limitations of such devices. Recent scanning probe measurements of the LaAlO3/SrTiO3 interface have revealed locally enhanced current flow and accumulation of charge along channels related to SrTiO3 structural domains. These observations raised a key question regarding the role these modulations play in the macroscopic properties of devices. Here we show that the microscopic picture, mapped by scanning superconducting quantum interference device, accounts for a substantial part of the macroscopically measured transport anisotropy. We compared local flux data with transport values, measured simultaneously, over various SrTiO3 domain configurations. We show a clear relation between maps of local current density over specific domain configurations and the measured anisotropy for the same device. The domains divert the direction of current flow, resulting in a direction-dependent resistance. We also show that the modulation can be significant and that in some cases up to 95% of the current is modulated over the channels. The orientation and distribution of the SrTiO3 structural domains change between different cooldowns of the same device or when electric fields are applied, affecting the device behavior. Our results, highlight the importance of substrate physics, and in particular, the role of structural domains, in controlling electronic properties of LaAlO3/SrTiO3 devices. Furthermore, these results point to new research directions, exploiting the STO domains' ability to divert or even carry current.

Mechanical Control of Individual Superconducting Vortices.

Manipulating individual vortices in a deterministic way is challenging; ideally, manipulation should be effective, local, and tunable in strength and location. Here, we show that vortices respond to local mechanical stress applied in the vicinity of the vortex. We utilized this interaction to move individual vortices in thin superconducting films via local mechanical contact without magnetic field or current. We used a scanning superconducting quantum interference device to image vortices and to apply local vertical stress with the tip of our sensor. Vortices were attracted to the contact point, relocated, and were stable at their new location. We show that vortices move only after contact and that more effective manipulation is achieved with stronger force and longer contact time. Mechanical manipulation of vortices provides a local view of the interaction between strain and nanomagnetic objects as well as controllable, effective, and reproducible manipulation technique.

Defect-Free Carbon Nanotube Coils.

Carbon nanotubes are promising building blocks for various nanoelectronic components. A highly desirable geometry for such applications is a coil. However, coiled nanotube structures reported so far were inherently defective or had no free ends accessible for contacting. Here we demonstrate the spontaneous self-coiling of single-wall carbon nanotubes into defect-free coils of up to more than 70 turns with identical diameter and chirality, and free ends. We characterize the structure, formation mechanism, and electrical properties of these coils by different microscopies, molecular dynamics simulations, Raman spectroscopy, and electrical and magnetic measurements. The coils are highly conductive, as expected for defect-free carbon nanotubes, but adjacent nanotube segments in the coil are more highly coupled than in regular bundles of single-wall carbon nanotubes, owing to their perfect crystal momentum matching, which enables tunneling between the turns. Although this behavior does not yet enable the performance of these nanotube coils as inductive devices, it does point a clear path for their realization. Hence, this study represents a major step toward the production of many different nanotube coil devices, including inductors, electromagnets, transformers, and dynamos.

Direct measurement of internal magnetic fields in natural sands using scanning SQUID microscopy.

NMR experiments are ideally carried out in well-controlled magnetic fields. When samples of natural porous materials are studied, the situation can be complicated if the sample itself contains magnetic components, giving rise to internal magnetic fields in the pore space that modulate the externally applied fields. If not properly accounted for, the internal fields can lead to misinterpretation of relaxation, diffusion, or imaging data. To predict the potential effect of internal fields, and develop effective mitigation strategies, it is important to develop a quantitative understanding of the magnitude and distribution of internal fields occurring in natural porous media. To develop such understanding, we employ scanning SQUID microscopy, a technique that can detect magnetic field variations very accurately at high spatial resolution (∼3µm). We prepared samples from natural unconsolidated aquifer material, and scanned areas of about 200×200µm in a very low background magnetic field of ∼2µT. We found large amplitude variations with a magnitude of about 2mT, across a relatively long spatial scale of about 200µm, that are associated with a large magnetic grain (>50µm radius) with a strong magnetic remanence. We also detected substantial variations exceeding 60µT on small spatial scales of about ∼10µm. We attribute these small-scale variations to very fine-grained magnetic material. Because we made our measurements at very low background field, the observed variations are not induced by the background field but due to magnetic remanence. Consequently, the observed internal fields will affect even low-field NMR experiments.

Locally enhanced conductivity due to the tetragonal domain structure in LaAlO3/SrTiO3 heterointerfaces.

The ability to control materials properties through interface engineering is demonstrated by the appearance of conductivity at the interface of certain insulators, most famously the {001} interface of the band insulators LaAlO3 and TiO2-terminated SrTiO3 (STO; refs 1, 2). Transport and other measurements in this system show a plethora of diverse physical phenomena. To better understand the interface conductivity, we used scanning superconducting quantum interference device microscopy to image the magnetic field locally generated by current in an interface. At low temperature, we found that the current flowed in conductive narrow paths oriented along the crystallographic axes, embedded in a less conductive background. The configuration of these paths changed on thermal cycling above the STO cubic-to-tetragonal structural transition temperature, implying that the local conductivity is strongly modified by the STO tetragonal domain structure. The interplay between substrate domains and the interface provides an additional mechanism for understanding and controlling the behaviour of heterostructures.

Imaging currents in HgTe quantum wells in the quantum spin Hall regime.

The quantum spin Hall (QSH) state is a state of matter characterized by a non-trivial topology of its band structure, and associated conducting edge channels. The QSH state was predicted and experimentally demonstrated to be realized in HgTe quantum wells. The existence of the edge channels has been inferred from local and non-local transport measurements in sufficiently small devices. Here we directly confirm the existence of the edge channels by imaging the magnetic fields produced by current flowing in large Hall bars made from HgTe quantum wells. These images distinguish between current that passes through each edge and the bulk. On tuning the bulk conductivity by gating or raising the temperature, we observe a regime in which the edge channels clearly coexist with the conducting bulk, providing input to the question of how ballistic transport may be limited in the edge channels. Our results represent a versatile method for characterization of new QSH materials systems.

Scanning probe manipulation of magnetism at the LaAlO3/SrTiO3 heterointerface.

Manipulation of magnetism is a longstanding goal of research in exotic materials. In this work, we demonstrate that the small ferromagnetic patches in LaAlO(3)/SrTiO(3) heterostructures can be dramatically changed by in situ contact of a scanning probe. Our results provide a platform for manipulation of small magnets through either a strong magneto-elastic coupling or sensitivity to surface modification. The ability to locally control magnetism is particularly interesting due to the presence of superconductivity with strong spin-orbit coupling in LaAlO(3)/SrTiO(3).

Critical thickness for ferromagnetism in LaAlO3/SrTiO3 heterostructures.

In LaAlO(3)/SrTiO(3) heterointerfaces, charge carriers migrate from the LaAlO(3) to the interface in an electronic reconstruction. Magnetism has been observed in LaAlO(3)/SrTiO(3), but its relationship to the interface conductivity is unknown. Here we show that reconstruction is necessary, but not sufficient, for the formation of magnetism. Using scanning superconducting quantum interference device microscopy we find that magnetism appears only above a critical LaAlO(3) thickness, similar to the conductivity. We observe no change in ferromagnetism with gate voltage, and detect ferromagnetism in a non-conducting p-type sample. These observations indicate that the carriers at the interface do not need to be itinerant to generate magnetism. The ferromagnetism appears in isolated patches whose density varies greatly between samples. This inhomogeneity strongly suggests that disorder or local strain generates magnetism in a population of the interface carriers.