RESUMO
This study aimed to optimize an alternative frozen dessert formulation using the response surface method (RSM). The formulation utilized oat-based milk substitute (OBMS) due to its desirable texture, sensory appeal, and nutritional benefits for vegans and lactose intolerant individuals. Xanthan gum (XG) was also incorporated to enhance the rheological properties of the dessert. With a coefficient of consistency of 192.58 Pa.s and a hysteresis field of 10,999 Pa/s, the ice cream formulation with the greatest rheological structure was discovered to be the combination of 20% oats, 0.5% xanthan gum (XG), and pasteurized at 65 °C. It also showed <10% melting in the first 10 min, confirming that it has a very stable structure. At the same pasteurization conditions and XG ratios, it was observed that rheological stability decreased with increasing oat milk addition. However, the shear thinning behavior of frozen dessert was improved by creating a more complex network structure with increasing XG concentration. The overrun values of the frozen desserts ranged from 21.55% to 34.63%, with the majority being statistically similar. The vegan frozen dessert formulation obtained with 40% oats, 0.37% XG and pasteurization at 60 °C showed a high level of sensory acceptance. This research contributes to the field of vegan food product development by providing innovative rheological and sensory alternatives to traditional frozen desserts using oats and XG.
RESUMO
The current study investigated the potential of utilizing wine lees extract (WLE) from red wine to enhance the sustainability and cost-effectiveness of xanthan gum (XG). A novel hydrogel system was successfully generated by cross-linking WLE and XG. Response surface methodology (RSM) was used to thoroughly analyze the characteristics of this novel hydrogel to understand its behavior and possible applications. Consistency index (K), flow behavior index (n), water holding capacity (%), and oil binding capacity (%) of the cross-linked hydrogels were optimized, and the best formulation was determined to be 0.81 % XG + 0.67 % WLE and crosslink temperature of 47 °C. The addition of WLE (0-1 % w/v) to different concentrations of XG (0-1 % w/v) was found to have a notable impact on the rheological properties, but changes in cross-link temperature (45-65 °C) did not have a significant effect. The activation energy was increased by incorporating WLE at XG concentration above 0.5 %, indicating a more robust and stable structure. FTIR and SEM analyses confirmed the chemical bonding structure of the optimum hydrogel. Incorporating WLE could significantly improve the functional properties of XG hydrogels, allowing the development of healthier product formulations.
Assuntos
Hidrogéis , Vinho , Hidrogéis/química , Polissacarídeos Bacterianos/química , Temperatura , ReologiaRESUMO
BACKGROUND: The purpose of this study was to evaluate the potential of incorporating wine lees (WL), an inexpensive and widely available high-value winery waste product, into gelatin-based jellies to improve their technological and functional properties. We also aimed to evaluate the suitability of WL as a jelly colorant by comparing it with a commercial colorant. RESULTS: Wine lees were characterized for their anthocyanin, phenolic, antioxidant, and mineral content. Subsequently, physicochemical, functional, textural, rheological, and thermal analyses were conducted on soft candies containing 21, 14, and 7 g kg-1 WL (labeled as WL30, WL20, and WL10, respectively). The total phenolic, anthocyanin, antioxidant, and cupric-reducing antioxidant capacity (CUPRAC) values of WL30 were determined as 57.80 ± 6.12 mg gallic acid equivalent per kilogram (GAE kg-1 ), 17.58 ± 0.36 mg malvidin-3-glucoside equivalent kg-1 , 0.04 ± 0.01 µg mL-1 , and 45.55 ± 1.00 mmol L-1 Trolox equivalent (TE), respectively. The control sample had the best rheological characteristics, including K', G', and n*, as well as the greatest hardness value, followed by WL30. However, during the storage period, WL30 exhibited superior color stability and retained higher levels of phenolic and anthocyanin components in comparison with the control sample. CONCLUSION: Wine lees have the potential to be utilized as a natural colorant and alternative flavoring agent in jelly production. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Assuntos
Vinho , Vinho/análise , Antioxidantes/química , Antocianinas/análise , Alimentos , Fenóis/análiseRESUMO
This study aimed to optimize the formulation of olive oil-in-water (O/W) emulsion gels by incorporating Pea Protein (PP) and Guar Gum (GG) as alternative options for solid fats. The optimum rheological (consistency index, apparent viscosity, recovery) and texture (firmness) properties of the emulsion gels were obtained using a mixture of 2 % PP, 1 % GG, 60 % Olive Oil (OO), and 37 % Water (W). The blend of PP2/GG1 showed the highest results for recovery and firmness, 111.27 % and 33.89 g, respectively. PP/GG blend emulsion gels exhibited higher absolute ζ-potential values, ranging between -72.3 and -77.4 mV. The polydispersity index (PDI) ranged from 0.185 to 0.535, with the most uniform distributions found in the PP/GG blend emulsion gels. Strong phase separation resistance indicated strong stability of PP-GG complex emulsion gels. Higher PP concentrations decreased emulsion oxidation. FTIR and XRD research showed that PP and GG interact strongly, indicating good compatibility. The free binding energy of the most stable configuration of the molecules was -6.8 kcal mol-1, indicating a high affinity. PP interacted with GG through 9 amino acid residues, with notable residues being Asp 224, Thr 235, Ala 332, Ile 334, and Arg 336, and their respective interaction distances ranged between 2.69 Å and 3.87 Å.
Assuntos
Substitutos da Gordura , Galactanos , Mananas , Olea , Proteínas de Ervilha , Gomas Vegetais , Substitutos da Gordura/química , Azeite de Oliva/química , Emulsões/química , Géis/química , Água/químicaRESUMO
The study aimed to use response surface methodology (RSM) to create and understand a novel edible film made from fish gelatin (FG). This film includes wine lees (WL) and carrageenan (CAR). The concentrations of WL (0, 1, 2, and 3 %) and CAR (0, 1, and 3 %) were considered independent variables. The process variable combinations for the optimal response functions were 1.926 % WL and 3 % CAR, forming soft and rigid films with low tensile strength (TS) and high elongation at break (EAB%). Based on the evaluation of each response, FG film had the highest TS value, FG/CAR(3 %) film had the maximum EAB, and FG/WL (3 %)/CAR (3 %) film had the lowest vapor permeability (WVP) and the highest opacity (OP). The incorporation of WL considerably improved the functional properties of these films, enabling strong antioxidant activity and high phenolic content. Characterization of the films with analytical techniques: Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis demonstrated a considerable interaction between WL and FG, indicating a high level of compatibility between the two substances. Our data suggest that the formulation of edible films can be adjusted to fit the specific requirements of the design.
Assuntos
Filmes Comestíveis , Vinho , Animais , Gelatina/química , Carragenina/química , Resistência à Tração , Permeabilidade , PeixesRESUMO
Aims: To evaluate the effect of the combination of irradiation and AZD0156 on apoptosis, cell cycle progression, and clonogenic survival in human breast cancer and fibroblast cells. Methods and Material: Estrogen receptor-positive breast cancer cell line MCF-7 and healthy lung fibroblast cell line WI-38 were obtained. Following employing proliferation analysis, cytotoxicity analysis was done to calculate the IC50 values of AZD0156 in MCF-7 and WI-38 cell lines. Following the application of AZD0156 and irradiation, flow cytometry analysis was performed for evaluating cell cycle distribution and the extent of apoptosis. Plating efficiency and surviving fraction were calculated for the clonogenic assay. Statistical Analysis Used: SPSS Statistics for Windows, Version 17.0. (SPSS Inc. Chicago) and GraphPad Prism Version 6.0 for Windows (GraphPad Software, San Diego, California USA) softwares were used to analyze data. Results: AZD0156 and irradiation dose of 2-10 Gy had no effect on apoptosis on MCF-7 cells. The combination treatment of AZD0156 and 2 Gy, 4 Gy, 6 Gy, 8 Gy, and 10 Gy irradiation induced G0/G1 phase arrest by 1.79, 1.79, 1.50, 1.25, and 1.52-fold compared to the control group, respectively on MCF-7 cell lines. Combination treatment of AZD0156 and each different irradiation dose affected clonogenic survival owing to increased radiosensitivity (p: 0.02). AZD0156 and irradiation dose of 2 Gy, 4 Gy, 6 Gy, 8 Gy, and 10 Gy decreased the cell viability rate of WI-38 cells by 1.05, 1.18, 1.22, 1.04, and 1.05-fold compared to the control group, respectively. No efficacy was detected on cell cycle analysis, and clonogenic survival was not significantly decreased in WI-38 cells. Conclusion: The combination use of irradiation and AZD0156 has improved efficacy of tumor cell-specific cell cycle arrest and decreasing clonogenic survival.
Assuntos
Neoplasias da Mama , Humanos , Feminino , Neoplasias da Mama/tratamento farmacológico , Neoplasias da Mama/radioterapia , Linhagem Celular Tumoral , Tolerância a Radiação , Sobrevivência Celular , Pulmão/patologia , Fibroblastos/patologia , Apoptose , Proteínas Mutadas de Ataxia TelangiectasiaRESUMO
Anthocyanins were extracted from a winery solid by-product (Vinasse) and added to fish gelatin (FG) and polyvinyl alcohol (PVA) matrices to create freshness monitoring labels. Three different colorimetric indicator smart films [PWE = polyvinyl alcohol with wine extract (WE), FWE = fish gelatin with WE, and PFWE = polyvinyl alcohol and FG blended film with WE] were generated and examined for their suitability to monitor the freshness of shrimp. The mechanical and optical properties, ammonia sensitivity, and colorimetric analysis of smart films were determined. Fourier transform-infrared spectroscopy (FTIR) was used to evaluate the interaction of anthocyanins with FG and PVA and changes in the film's chemical composition with storage. The film surfaces were characterized with atomic force microscopy (AFM). The incorporation of WE enhanced the films' flexibility by providing plasticizer and surfactant properties. The PWE film showed the best color stability. The FWE film showed the least amount of total color change with exposure to ammonia gas and was deemed suitable for refrigerated food packaging. The color of all indicator films showed significant changes suggesting that PWE, FWE, and PFWE films can be utilized in the intelligent packaging application for protein-rich foods to detect spoilage.
Assuntos
Antocianinas , Álcool de Polivinil , Amônia , Animais , Antocianinas/química , Colorimetria , Peixes , Embalagem de Alimentos/métodos , Gelatina/química , Concentração de Íons de Hidrogênio , Extratos Vegetais/química , Plastificantes , Álcool de Polivinil/química , TensoativosRESUMO
In this study, fish skin gelatin (FG) obtained from sea bream (Sparus aurata) was evaluated as an alternative to mammalian gelatin. Improvement in rheological properties of FG was attempted with addition of grape pomace (GP), pomegranate peel (PP), and green tea (GT) extracts, all of which are agricultural wastes rich in phenolic components. These additives were added at ratios of 20%, 13.3%, 10%, and 6.7% to determine the best formulation. Melting and gelling temperatures, kgel, gel strength, and tmodel values of samples were measured. 20% GP added fish gelatin (OG) had optimum rheological properties. Melting temperatures of BG, OG, and FG were 31.64 ± 0.28, 33.80 ± 0.54, 25.78 ± 0.24 °C, respectively. The addition of GP caused a 14% increase in Tg by increasing the intermolecular interactions of FG. GP is important in that it provides functional properties and structural improvement of FG, making it an alternative to BG and facilitating its use in confectionery industry.
Assuntos
Gelatina , Dourada , Animais , Coloides , Gelatina/química , Géis/química , Mamíferos , Extratos Vegetais , ReologiaRESUMO
The potential for the use of rice bran, an agricultural waste, as a substrate in the manufacture of gellan gum was examined. Using a standard strain of Sphingomonas paucimobilis (ATCC 31461) and rice bran substrate, gellan gum was produced under optimized conditions. The optimal yield of gellan gum using rice bran substrate was found to be 11.96 g L-1 with 5% glucose, 10% inoculum, and a mixing speed of 300 rpm. Native gum was found to have a consistency index of 2.00 Pa.sn. The viscosity of the gum was found to be extremely stable when exposed to thermal stress. Concerning the rheological characteristics, the Herschel-Bulkley model offered a more realistic representation of the flow characteristics of gum solutions. The synthesized gums were mostly composed of glucose, rhamnose, and glucuronic acid. The acetic acid content of gellan gums was 2.95%, while the molecular weight was 2.88 × 105 Da. Characterization of native gellan gums by UV-Vis spectroscopy, SEM, TEM and FTIR spectroscopy is also presented.