Changes in Gloss Alteration, Surface Roughness, and Color of Direct Dental Restorative Materials after Professional Dental Prophylaxis.

In the context of optimizing dental care for patients who are elderly, the purpose of this in vitro study was to evaluate the surface gloss (with a micro-area gloss meter) of, surface roughness (with a compact surface roughness measuring instrument) of, and color change (with a dental colorimeter) in two commercially available injectable resin-based composites (Estelite Universal Flow (EUF) and Beautifil Flow Plus F00 (BFP)) as well as two glass-ionomer cements (GC Fuji II LC CAPSULE (FLC) and GC Fuji IX GP EXTRA CAPSULE (FGP)), before and after dental prophylaxis. After 24 h, the surfaces of each specimen were polished at 2500 rpm with a prophy brush (Mersage Brush, Shofu) and one-step prophylaxis paste (Prophy Paste Pro, Directa): under 100 or 300 gf load, and for 10 or 30 s, 4× cycles of cleaning. After mechanical cleaning, conditions were found for a significant reduction in the gloss level (EUF, BFP, or FLC; p < 0.05) and a significant increase in surface roughness (BFP; 300 gf load, 10 s × four cycles of cleaning). Overall, the longer time or higher prophylaxis load tended to decrease the surface gloss. However, the observed change in surface roughness varied between the restorative materials. There was no color change post-prophylaxis.

Lewis Adduct-Dissociating Hydrolysis of Boratrane for Water-Triggered Dehydration of Copolymers with a Hydrophobic Moiety.

As a new example of intrinsically water-triggered phenomena, we report underwater dehydration of the statistical copolymers synthesized from triethanolamine borate (TEAB) methacrylate and styrene (St) induced by the hydrolysis of the pendant TEAB group. TEAB possesses high polarity owing to its internal Lewis adduct structure, which is lost by hydrolysis to triethanolamine (TEA) with a lower dipole moment. Therefore, the hydration of the copolymers became unfavorable through the hydrolysis of the pendant TEAB to TEA, despite polyol formation, and through a hydrophobic interaction based on St moieties becoming alternatively dominant. The dehydration behavior of the copolymers, along with the hydrolysis of the pendant TEAB group, was systematically investigated. The water solubility of the copolymers was found to be dependent on the gradient of the hydrolysis equilibrium of TEAB on the side chains and was the lowest for the TEA state. These findings offer a novel concept toward designing water-responsive materials.

Combined use of baking soda and electric toothbrushing for removal of artificial extrinsic stain on enamel surface: An in vitro study.

BACKGROUND: This study aimed to investigate the combined effect of baking soda and electric toothbrushing on the removal of artificial extrinsic stain in vitro. MATERIAL AND METHODS: Flat enamel surfaces of 15 bovine incisors were artificially stained with 10% citric acid / 3% ferric chloride solution followed by 1% tannic acid solution. These specimens were randomly divided into three groups (n = 5) - Group S+B: brushing with an electric toothbrush and baking soda, Group S+C: brushing with an electric toothbrush and fluoride dentifrice, Group S: brushing only with an electric toothbrush. Color values (L*, a*, and b*) and surface roughness were measured before and after brushing (after 1, 2, 3, and 5 min). The data were statistically analyzed using two-way analysis of variance and Tukey's honest significant difference test as a post hoc test (p< 0.05). RESULTS: The L* value of Group S+B increased over time, and was significantly different between before brushing and at 5 min (p< 0.05). A significant difference in the ΔE* value of Group S+B was found at 5 min (p< 0.05). However, no significant difference was found in the ΔE* values of Group S+C and Group S. No significant differences in Ra were found in any of the groups. CONCLUSIONS: The results of this study suggest that the combined use of baking soda and electric toothbrushing has an excellent stain-removing effect compared with electric toothbrushing with a fluoride dentifrice. Additionally, the changes in surface roughness were similar to the changes caused by the use of general dentifrices. Key words:Baking soda, dentifrice, extrinsic stain removal, color change, surface roughness.

Marginal Leakage of Endodontic Temporary Restorative Materials around Access Cavities Prepared with Pre-Endodontic Composite Build-Up: An In Vitro Study.

This study aimed to examine the marginal seal between various commercial temporary restorative materials and exposed dentin/built-up composite. Sixty bovine incisors were cut above the cemento-enamel junction, and half of the dentin was removed to form a step, which was built up using flowable resin composite. The root canals were irrigated, filled with calcium hydroxide, and sealed using one of six temporary sealing materials (hydraulic temporary restorative material, temporary stopping material, zinc oxide eugenol cement, glass-ionomer cement, auto-cured resin-based temporary restorative material, and light-cured resin-based temporary restorative material) (n = 10 for each material). The samples were thermocycled 500 times and immersed in an aqueous solution of methylene blue. After 2 days, they were cut along the long axis of the tooth and the depth of dye penetration was measured at the dentin side and the built-up composite side. For the margins of the pre-endodontic resin composite build-up, the two resin-based temporary restorative materials showed excellent sealing. Hydraulic temporary restorative material had a moderate sealing effect, but the sealing effect of both zinc oxide eugenol cement and glass-ionomer cement was poorer.

Combined effects of electric toothbrushing and dentifrice on artificial stain removal: An in vitro study.

BACKGROUND: This in vitro study aimed to clarify the combined effect of electric toothbrushing and dentifrice on the removal of artificial stain. MATERIAL AND METHODS: Twenty-five bovine incisors were cut at the cervix and the crown was embedded in auto-cured acrylic resin. Specimens were abraded using #240 SiC paper to obtain a flat enamel surface, and 20 specimens were treated with 10% citric acid / 3% ferric chloride solution followed by 1% tannic acid solution to produce surface staining. They were divided into four groups: 1) brushing with an electric toothbrush and whitening dentifrice (group S+B); 2) brushing with an electric toothbrush and fluoride dentifrice (group S+C); 3) brushing with an electric toothbrush and no dentifrice (group S); and 4) no brushing (control group). The remaining five specimens were used as a baseline. Color values (L*, a*, and b* were measured before brushing (0 min), and at 1 min, 5 min, 10 min, and 20 min using a microscopic area spectrophotometer. The color change (ΔE) was calculated by subtracting the baseline values from the final color values obtained at each time point. The data were statistically analyzed using two-way repeated-measures analysis of variance and Tukey's honest significant difference test as a post hoc test (p<0.05). RESULTS: The L* values of groups S+B and S+C increased over time (p<0.05), but no significant differences were observed in group S and the control group at any of the time points (p>0.05). Groups S+B and S+C demonstrated greater ΔE values than group S. CONCLUSIONS: The combination of electric toothbrushing and dentifrice removed the artificial stain more effectively than brushing without dentifrice. However, the stain removal was limited. The two dentifrices evaluated in this study exhibited similar stain removal effects. Key words:Color change, stain removal, dentifrice, electric toothbrush, whitening effect.

GPDM- and 10-MDP-based Self-etch Adhesives Bonded to Bur-cut and Uncut Enamel - "Immediate" and "Aged" µTBS.

PURPOSE: To determine the microtensile bond strength (µTBS) of two 2-step self-etch adhesives (SEAs) to bur-cut and uncut enamel. MATERIALS AND METHODS: The buccal and lingual enamel surfaces of 15 teeth were ground flat ("bur-cut" enamel), while the enamel surface of another set of 15 teeth was solely prophylactically cleaned ("uncut" enamel). Resin composite was bonded to the surfaces using the GPDM-based SEA OptiBond XTR (Kerr), the 10-MDP-based SEA Clearfil SE Bond (Kuraray Noritake), or the 3-step etch-and-rinse adhesive (E&RA) OptiBond FL (Kerr) that served as the gold-standard control. After 1-week water storage at 37°C, specimens were serially cut into 1-mm2 stick-shaped microspecimens, of which half per tooth were further subjected to 20,000 thermocycles (TC) prior to µTBS testing. Data were statistically analyzed using ANOVA and the post-hoc Tukey test. The interfacial ultrastructure of the GPDM-based SEA OptiBond XTR with uncut and bur-cut enamel was additionally characterized with transmission electron microscopy (TEM). RESULTS: After 1-week water storage and upon TC aging, both SEAs bonded significantly (p < 0.05) less effectively to both bur-cut and uncut enamel than did the control OptiBond FL, except when OptiBond XTR was bonded to bur-cut enamel; then a similarly high µTBS was recorded (p > 0.05). TEM interfacial characterization revealed a tight interaction of Optibond XTR with both bur-cut and uncut enamel. CONCLUSION: The best bonding efficacy to enamel is still achieved by etching with phosphoric acid, following an E&R approach, while the higher etching efficacy of the GPDM-based SEA may result in equally effective bonding, provided that the enamel is bur-roughened first.

Effect of professional dental prophylaxis on the surface gloss and roughness of CAD/CAM restorative materials.

BACKGROUND: This study aimed to evaluate the effect of dental prophylaxis on the surface gloss and roughness of different indirect restorative materials for computer-aided design/computer-aided manufacturing (CAD/CAM): two types of CAD/CAM composite resin blocks (Shofu Block HC and Estelite Block) and two types of CAD/CAM ceramic blocks (IPS Empress CAD and Celtra DUO). MATERIAL AND METHODS: After polishing the CAD/CAM blocks and applying prophylaxis pastes, professional dental prophylaxis was performed using four different experimental protocols (n = 5 each): mechanical cleaning with Merssage Regular for 10 s four times (Group 1); four cycles of mechanical cleaning with Merssage Regular for 10 s and Merssage Fine for 10 s (Group 2); four cycles of mechanical cleaning with Merssage Regular for 10 s and Merssage Fine for 30 s (Group 3); and mechanical cleaning with Merssage Fine for 10 s four times (Group 4). A glossmeter was used to measure surface gloss before and after mechanical cleaning, and a contact stylus profilometer was used to measure surface roughness (Ra). RESULTS: Polishing with prophylactic paste led to a significant reduction in surface gloss and increase in surface roughness among resin composite blocks, whereas the polishing-related change in surface gloss or roughness was smaller in Celtra DUO, a zirconia-reinforced lithium silicate block. CONCLUSIONS: Changes in surface gloss and roughness due to polishing with a prophylactic paste containing large particles were not improved by subsequent polishing with a prophylactic paste containing fine particles. Key words:CAD/CAM, professional dental prophylaxis, prophylactic paste, surface gloss, surface roughness.

SURVEY OF DENTAL STUDENTS' ATTITUDE REGARDING ORIENTAL MEDICINE/COMPLEMENTARY AND ALTERNATIVE MEDICINE: COMPARISON BETWEEN TWO JAPANESE DENTAL SCHOOLS.

BACKGROUND: The present study aimed to examine the impact of "curricula for undergraduate education in oriental medicine (OM)/complementary and alternative medicine (CAM)" on student awareness of OM. A questionnaire survey was conducted involving the Nagasaki University School of Dentistry (NUSD), a university that implements education in OM as part of its undergraduate curriculum, and Tokyo Dental College (TDC), which does not teach OM. MATERIALS AND METHODS: The third- and fifth-year students of both NUSD and TDC underwent the anonymous questionnaire survey, which included questions regarding their knowledge of OM and CAM, interests in these subjects, and their opinions on the necessity of teaching OM in the undergraduate dental education, and the results were collected for analysis. RESULTS: Whereas 33% of 5th year NUSD students had knowledge of OM/CAM was 33%, only 10% of 5th year TDC students reported knowledge on the subject. 69% of 5th year NUSD students interested in OM/CAM, while 5th year TDC students who interest them were only 45%. Although 77% of 5th year NUSD students were in favor of OM education implemented in the Faculty of Dentistry, the percentages of TDC students of that were smaller (46% in 3rd year and 48% in 5th year). Whereas 26% of 5th year TDC students did not recognize the necessity of oriental medicine education, only one 5th year NUSD student (2%) did not so. CONCLUSION: Introduction of education in OM in the undergraduate dental education program helps students to increase their interests in dental clinical applications.

Resin Bonding of Self-Etch Adhesives to Bovine Dentin Bleached from Pulp Chamber.

This study evaluated the microtensile bond strength (µTBS) of 1-step self-etch adhesives (1-SEAs) and 2-step self-etch adhesives (2-SEAs) to pulp chamber dentin immediately after bleaching with 2 types of common bleaching techniques. Pulp chamber dentin of bovine teeth was bleached using 30% hydrogen peroxide (H2O2) solution with quartz-tungsten-halogen light-curing unit (Group 1) and 3.5% H2O2-containing titanium dioxide (TiO2) (Pyrenees®) activated with 405-nm violet diode laser for 15 min (Group 2). Unbleached specimens were placed in distilled water for 15 min and used as controls. After treatment, dentin was bonded with resin composite using 1-SEA or 2-SEA and stored in water at 37°C for 24 h. Each specimen was sectioned and trimmed to an hourglass-shape and µTBS was measured. Fractured specimens were examined under a scanning electron microscope to determine fracture modes. All specimens in Group 1 failed before proper bonding tests. In Group 2, the µTBS of 2-SEA was significantly greater (with no failed specimens) than 1-SEA (where 21 out of 36 failed). These results indicate that 2-SEA is a better adhesive system than 1-SEA on bleached dentin. Our results also demonstrated that application of H2O2 significantly decreases bond strength of resin to dentin; however, in the case of nonvital tooth bleaching, Pyrenees® is a better alternative to the conventional 30% H2O2 bleaching.

Luting of CAD/CAM ceramic inlays: direct composite versus dual-cure luting cement.

The aim of this study was to investigate bonding effectiveness in direct restorations. A two-step self-etch adhesive and a light-cure resin composite was compared with luting with a conventional dual-cure resin cement and a two-step etch and rinse adhesive. Class-I box-type cavities were prepared. Identical ceramic inlays were designed and fabricated with a computer-aided design/computer-aided manufacturing (CAD/CAM) device. The inlays were seated with Clearfil SE Bond/Clearfil AP-X (Kuraray Medical) or ExciTE F DSC/Variolink II (Ivoclar Vivadent), each by two operators (five teeth per group). The inlays were stored in water for one week at 37°C, whereafter micro-tensile bond strength testing was conducted. The micro-tensile bond strength of the direct composite was significantly higher than that from conventional luting, and was independent of the operator (P<0.0001). Pre-testing failures were only observed with the conventional method. High-power light-curing of a direct composite may be a viable alternative to luting lithium disilicate glass-ceramic CAD/CAM restorations.

Correlations between Perceived Oral Malodor Levels and Self-Reported Oral Complaints.

Objectives. Even though objective data indicating the absence of oral malodor are presented to patients, they may be skeptical about the results, possibly due to the presence of some discomfort in the oral cavity. The objective of this study was to investigate whether there is an association among self-perceptions of oral malodor, oral complaints, and the actual oral malodor test result. Materials and Methods. Questions concerning self-perceptions of oral malodor and subjective intraoral symptoms were extracted from a questionnaire on oral malodor completed by 363 subjects who visited the clinic for oral malodor of Tokyo Dental College Chiba Hospital and gave consent to this study. In addition, the association of self-perception of oral malodor with values obtained after organoleptic and OralChroma measurement was analyzed. Results. No correlation between 195 subjects (54%) who were judged "with oral malodor" (organoleptic score of ≥1) and 294 subjects (81.6%) who had a self-perceptions of oral malodor was observed. Self-perception of oral malodor was significantly correlated with tongue coating (p = 0.002) and a strange intraoral taste (p = 0.016). Conclusions. Subjects with a self-perception of oral malodor were not necessarily consistent with those actually having an oral malodor. In addition, it was suggested that patients became aware of oral malodor when they felt oral complaints.

Influence of hydrophilic pre-treatment on resin bonding to zirconia ceramics.

Atmospheric plasma or ultraviolet (UV) treatment alters the surface characteristics of tetragonal zirconia polycrystal (TZP), increasing its hydrophilicity by reducing the contact angle against water to zero. This suggests that such treatment would increase the wettability of bonding resin. The purpose of this study was to determine how increasing the hydrophilicity of TZP through plasma irradiation, UV treatment, or application of ceramic primer affected initial bonding with resin composites. Here, the effect of each pre-treatment on the hydrophilicity of TZP surfaces was determined by evaluating change in shear bond strength. Plasma irradiation, UV, or ceramic primer pre-treatment showed no significant effect on bonding strength between TZP surfaces and resin composites. In addition, alumina blasting yielded no significant increase in bond strength. Plasma irradiation, UV treatment, or ceramic primer pre-treatment did not lead to significant increase in bond strength between TZP and resin composites.

Personality traits in patients with oral malodor.

Many patients presenting at oral malodor clinics have psychological halitosis, which is characterized as being obsessive about having oral malodor or being distressed from a keen awareness of oral odor. We used the Tokyo University Egogram (TEG) to evaluate personality traits in patients presenting at the oral malodor clinic of this institute. The incidence of each TEG personality type was compared between a total of 600 patients presenting at the clinic and a cohort of healthy individuals. Differences were found between the malodor patient and healthy groups. Nurturing Parent (NP)-dominant, Adult (A)-dominant, inverse N (NP low, Free Child high), showed a significant decrease of 6.7, 11.3, and 3.6%, respectively; whereas N (A low) and N (NP high, Free Child low) showed a significant increase of 3.3 and 6.4%, respectively (p < 0.01).

Career paths and aspirations among postgraduate dental trainees on completion of clinical residency program at Tokyo Dental College.

Career paths and aspirations were investigated among postgraduate dental trainees on completion of clinical training at Tokyo Dental College between 2006, when clinical residency became mandatory, and 2011. Overall, those finding employment with independent general dental practitioners accounted for the majority (34%), followed by those entering postgraduate courses at the Chiba Hospital (20%), those embarking on a postgraduate clinical specialty course at the Chiba Hospital (16%), and those going on to other universities (7%). At the Chiba Hospital, the number selecting postgraduate courses, residency training (including further residency training or a postgraduate clinical specialty course), or employment with a general dental practitioner was almost the same; however, the number selecting postgraduate courses at the Suidobashi Hospital was low, showing a strong tendency toward becoming a general or clinical practitioner. At the Ichikawa General Hospital, most of the trainees decided to remain at the same school or hospital as postgraduate students or residents, showing an aspiration toward further specialization. The results of the Fisher's exact test showed a significant difference in career paths between the Chiba, Suidobashi, and Ichikawa General Hospitals. Trends among postgraduate dental trainees from this and other schools completing the clinical residency program here and subsequently entering postgraduate courses, further residency training, or a postgraduate clinical specialty course at this school were investigated. No major difference was observed in the percentage of trainees remaining at the same school or entering postgraduate courses between those from this and those from other schools; however, more trainees from other schools selected further residency training, while fewer selected a postgraduate clinical specialty course.

Influence of different rubber dam application on intraoral temperature and relative humidity.

The purpose of this study was to investigate the effect of type of rubber dam and application method on the moisture exclusion effect. The intraoral temperature and relative humidity were compared among various moisture exclusion appliances. Various dry field techniques were applied to 5 subjects and intraoral temperature and relative humidity measured 5 min after placing a digital hygro-thermometer in the mouth. The relative humidity was 100% in all subjects when moisture was excluded by means of cotton rolls alone. When only tooth 36 was exposed, relative humidity was significantly lower with latex, urethane, or 3-dimensional sheets than with cotton rolls alone, and was similar to the level of humidity in the room. When a local rubber dam was used, the relative humidity was significantly higher than the indoor humidity (p<0.05). No significant differences were noted in the intraoral temperature or relative humidity between exposure of 4 teeth and 1 tooth, but variation in the relative humidity was more marked in 4- than in 1-tooth exposure. The creation of an air vent did not influence the moisture exclusion effect. These results suggest that the rubber dam isolation technique excludes moisture to a level equivalent to the humidity in the room when only a single tooth is exposed, but the moisture exclusion effect may be inconsistent when several teeth are exposed.

Analysis of dental treatment performed by dental residents at General Dentistry Department of Tokyo Dental College Chiba Hospital over 6 years following introduction of mandatory dental clinical training system.

Six years have passed since the introduction of legislation mandating at least 1 year of clinical training for those who have passed the national dentist examination. To determine whether clinical training has been appropriately implemented at the General Dentistry Department of Tokyo Dental College Chiba Hospital, a managed-type clinical training facility, the number of patients treated and types of dental and dental technical work performed by dental residents trained by the department were summarized and analyzed. The number of patients treated per dental resident increased from 11 in 2006 to 15 in 2011. By treatment type, periodontic treatment was the most frequently performed throughout the study period, followed by endodontic treatment. Conservation treatment, prosthodontic treatment with crowns/bridges, and prosthodontic treatment with dentures were performed at a similar moderate frequency, while oral surgical treatment was performed least frequently throughout the study period. The frequency of periodontic treatment increased slightly, whereas that of endodontic treatment decreased slightly or remained almost unchanged after introduction of the mandatory clinical training system. When the distribution of dental treatment performed at our department was compared with that of dental treatment performed by general dentists across Japan in 2011, our department showed a slightly lower frequency of periodontic treatment and higher frequency of endodontic treatment than the national total, whereas the frequency of other types of treatment was similar between the two populations. These results demonstrated that appropriate clinical training has been provided by our department to meet the purpose of offering dentists the opportunity to acquire the basic diagnostic and treatment abilities that would enable them to provide appropriate treatment for injuries and diseases frequently encountered in daily practice. The study also revealed some problems, such as a decreasing number of residents engaging in dental technical work each year. For additional improvement in the quality of dental clinical training, more analyses are needed to further identify and address potential problems in the system.

Recent trends among dental residents at Tokyo Dental College.

Trends among dental residents at Tokyo Dental College between 2006, at which time clinical residency became mandatory, and 2011 were analyzed and the following results obtained. Almost all the eligible students from our school participated in the orientation seminar on dental residency programs. Although the number varied slightly by year, approximately 70 to 150 students from other schools also participated in these orientation seminars. Almost all the students from our school and 60 to 80% of those from other schools participating in the orientation seminar each year applied to sit the dental residency entrance examination. The number of candidates was highest in 2006 (318) and lowest in 2010 (205) (average: 248), and the applicant-to-seat ratio for residency was 1.59. The examination pass rate was 59.02%. Approximately 10% of the students from other schools were admitted as dental residents.

Effect of emitted wavelength and light guide type on irradiance discrepancies in hand-held dental curing radiometers.

The purpose of this study was to determine any discrepancies in the outputs of five commercial dental radiometers and also to evaluate the accuracy of these devices using a laboratory-grade spectroradiometer. The power densities of 12 different curing light sources were repeatedly measured for a total of five times using each radiometer in a random order. The emission spectra of all of the curing light sources were also measured using the spectroradiometer, and the integral value of each spectrum was calculated to determine the genuine power densities, which were then compared to the displayed power densities measured by the dental radiometers. The displayed values of power density were various and were dependent on the brand of radiometer, and this may be because each radiometer has a different wavelength sensitivity. These results cast doubt upon the accuracy of commercially available dental radiometers.

Durable bonding to mechanically and/or chemically pre-treated dental zirconia.

OBJECTIVES: To evaluate the effect of mechanical and chemical surface pre-treatment on the bond durability of two composite cements to dental zirconia. METHODS: Fully sintered IPS e.max ZirCAD (Ivoclar-Vivadent) blocks were either subjected to tribochemical silica sandblasting (CoJet, 3M ESPE) or not mechanically pre-treated. Next, the zirconia samples were either additionally pre-treated using one of two silane/MDP-combined ceramic primers (Clearfil Ceramic Primer, Kuraray; Monobond Plus, Ivoclar-Vivadent), or not further chemically pre-treated. Finally, two identically pre-treated zirconia blocks were bonded together using either a conventional BisGMA-based (Clearfil Esthetic Cement, Kuraray) or an MDP-based (Panavia F2.0, Kuraray) 'self-etch' dual-cure composite cement. The specimens were trimmed at the interface to a cylindrical hour-glass shape and stored for 7 days in distilled water (37°C), after which they were randomly exposed to one of three ageing protocols: (1) immersed in 37°C water for 10 days (10d); (2) subjected to 10,000 thermo-cycles (TC); or (3) immersed in 37°C water for 6 months (6m). After storage, the micro-tensile bond strength (µTBS) was determined in MPa (n=15-21/group). Fractographic analysis was performed using SEM. RESULTS: Weibull analysis revealed the highest Weibull scale and shape parameters for the 'CoJet/Clearfil Ceramic Primer/Panavia F2.0/10d' combination. While the BisGMA-based composite cement Clearfil Esthetic Cement (Kuraray) bonded equally well to zirconia using either tribochemical silica sandblasting (CoJet, 3M ESPE) or not, sandblasting appeared indispensable for the MDP-based and more hydrophilic composite cement Panavia F2.0 (Kuraray). CONCLUSIONS: Combined mechanical and chemical pre-treatment can best be recommended to durably bond to zirconia. CLINICAL SIGNIFICANCE: As a standard procedure to durable bond zirconia to tooth tissue, both mechanical (tribochemical silica coating) and chemical (silane/MDP-combined ceramic primers) is clinically highly recommended.

Character traits of malodor patients.

Many patients visit oral malodor clinics because of malodors which are brought to their attention by friends and family, or because they note the behavior of people around them, they suspect a problem and develop a fear of having an oral malodor. However, only around 30% of such patients actually have levels of malodor high enough to bother other people. Many patients exhibit halitophobia symptoms, which present as self-perception of malodor, and thus have a strong obsession about their smell which results in distress. Here, we carried out a study on 300 outpatients who visited the Tokyo Dental College Chiba Hospital Odor Clinic. We used the Tokyo University Egogram (TEG) to elucidate character traits of affected outpatients and compared the occurrence of TEG types in these patients with those of normal individuals. We discovered that 10.4% of patients were A-dominant type, which was 10.6% lower than the 21.0% of normal individuals. On the other hand, 18.4% of patients were N-type (NP high, FC low), which was 9.9% higher than the 8.5% of normal individuals. Results revealed that very few of the malodor outpatients exhibited the trait that shows intelligence, calm judgment, and self-affirmation, and as a result enjoy their life. Instead, many of these patients tended to show high levels of kindness and appeared to be holding themselves back and exercising patience.