Antiviral and Antibacterial 3D-Printed Products Functionalised with Poly(hexamethylene biguanide).

Infection prevention and public health are a vital concern worldwide, especially during pandemics such as COVID-19 and seasonal influenza. Frequent manual disinfection and use of chemical spray coatings at public facilities are the typical measures taken to protect people from coronaviruses and other pathogens. However, limitations of human resources and coating durability, as well as the safety of disinfectants used are the major concerns in society during a pandemic. Non-leachable antimicrobial agent poly(hexamethylene biguanide) (PHMB) was mixed into photocurable liquid resins to produce novel and tailor-made covers for public facilities via digital light processing, which is a popular 3D printing technique for satisfactory printing resolution. Potent efficacies of the 3D-printed plastics were achieved in standard antibacterial assessments against S. aureus, E. coli and K. pneumoniae. A total of 99.9% of Human coronavirus 229E was killed after being in contact with the 3D-printed samples (containing the promising PHMB formulation) for two hours. In an eight-week field test in Hong Kong Wetland Park, antibacterial performances of the specially designed 3D-printed covers analysed by environmental swabbing were also found to be satisfactory. With these remarkable outcomes, antimicrobial products prepared by digital light processing 3D printing can be regarded as a reliable solution to long-term infection prevention and control.

Influence of Electrospinning Parameters on the Morphology of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibrous Membranes and Their Application as Potential Air Filtration Materials.

A large number of non-degradable materials have severely damaged the ecological environment. Now, people are increasingly pursuing the use of environmentally friendly materials to replace traditional chemical materials. Polyhydroxyalkonates (PHAs) are receiving increasing attention because of the unique biodegradability and biocompatibility they offer. However, the applications of PHAs are still limited due to high production costs and insufficient study. This project examines the optimal electrospinning parameters for the production of PHA-based fibrous membranes for air filtration. A common biodegradable polyester, Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), was electrospun into a nanofibrous membrane with a well-controlled surface microstructure. In order to produce smooth, bead-free fibers with micron-scale diameters, the effect of the process parameters (applied electric field, solution flow rate, inner diameter of hollow needle, and polymer concentration) on the electrospun fiber microstructure was optimized. The well-defined fibrous structure was optimized at an applied electric field of 20 kV, flow rate of 0.5 mL/h, solution concentration of 12 wt.%, and needle inner diameter of 0.21 mm. The morphology of the electrospun PHBV fibrous membrane was observed by scanning electron microscopy (SEM). Fourier transform infrared (FTIR) and Raman spectroscopy were used to explore the chemical signatures and phases of the electrospun PHBV nanofiber. The ball burst strength (BBS) was measured to assess the mechanical strength of the membrane. The small pore size of the nanofiber membranes ensured they had good application prospects in the field of air filtration. The particle filtration efficiency (PFE) of the optimized electrospun PHBV fibrous membrane was above 98% at standard atmospheric pressure.

Facile and Widely Applicable Route to Self-Adaptive Emissivity Modulation: Energy-Saving Demonstration with Transparent Wood.

The cooling power provided by radiative cooling is unwanted during cold hours. Therefore, self-adaptive regulation is desired for radiative cooling, especially in all-weather applications. However, current routes for radiative cooling regulation are constrained by substrates and complicated processing. Here, self-adaptive radiative cooling regulation on various potential substrates (transparent wood, PET, normal glass, and cement) was achieved by a Fabry-Perot structure consisting of a silver nanowires (AgNWs) bottom layer, PMMA spacer, and W-VO2 top layer. The emissivity-modulated transparent wood (EMTW) exhibits an emissivity contrast of 0.44 (ε8-13-L = ∼0.19 and ε8-13-H = ∼0.63), which thereby yields considerable energy savings across different climate zones. The emissivity contrast can be adjusted by varying the spinning parameters during the deposition process. Positive emissivity contrast was also achieved on three other industrially relevant substrates via this facile and widely applicable route. This proves the great significance of the approach to the promotion and wide adoption of radiative cooling regulation concept in the built environment.

Reverse Micellar Dyeing of Cotton Fabric with Reactive Dye Using Biodegradable Non-Ionic Surfactant as Nanoscale Carrier: An Optimisation Study by One-Factor-at-One-Time Approach.

This study investigates the feasibility of using biodegradable secondary alcohol ethoxylate (SAE) non-ionic surfactant as a building block for the formation of reverse micelles, functioning as reactive dye carriers for the dyeing of cotton fabric in non-aqueous octane medium. Ten dyeing parameters were optimised, by a one-factor-at-a-time approach, namely: (i) effect of colour fixation agent; (ii) surfactant-to-water mole ratio; (iii) surfactant-to-co-surfactant mole ratio; (iv) volume of soda ash; (v) volume of dye; (vi) solvent-to-cotton ratio; (vii) dyeing temperature; (viii) dyeing time; (ix) fixation time; (x) soda-ash-to-cotton ratio. The colour properties, fastness properties and physical properties of SAE-dyed samples were experimentally compared with the conventional water-dyed samples. The optimised condition was found when SAE samples were dyed as follows: (a) 1:20 surfactant-to-water ratio; (b) 1:8 surfactant-to-co-surfactant ratio; (c) 10:1 solvent ratio; (d) 40 min dyeing time; (e) 60 min fixation time; and (f) 70 °C dyeing and fixation temperature. The results showed that SAE-dyed samples have better colour strength, lower reflectance percentage and comparable levelness, fastness and physical properties than that of water-dyed samples. SEM images revealed that the dyed cotton fibres had no severe surface damage caused by an SAE-based reverse micellar dyeing system. The TEM image depicts that the reverse micelle was of nanoscale, spherical-shaped and had a core-shell structure, validating the presence of reverse micelle as a reactive dye carrier and the potential of an SAE-based reverse micellar system for dyeing of cotton fabrics.

Longitudinal Study on the Antimicrobial Performance of a Polyhexamethylene Biguanide (PHMB)-Treated Textile Fabric in a Hospital Environment.

Healthcare workers in the hospital environment are at risk of infection and body fluids such as saliva, bacterial contamination, oral bacteria, etc. directly or indirectly exacerbate this issue. These bio-contaminants, when adhered to hospital linens and clothing, grow substantially, as conventional textile products provide a favorable medium for bacterial and viral growth, adding to the risk of transmitting infectious diseases in the hospital environment. Textiles with durable antimicrobial properties prevent microbial colonization on their surfaces and help contain the spread of pathogens. This longitudinal study aimed to investigate the antimicrobial performance of PHMB-treated healthcare uniforms during prolonged usage and repetitive laundry cycles in a hospital environment. The PHMB-treated healthcare uniforms displayed non-specific antimicrobial properties and remained efficient (>99% against S. aureus and K. pneumoniae) after use for 5 months. With the fact that no antimicrobial resistance was reported towards PHMB, the presented PHMB-treated uniform may reduce infection in hospital settings by minimizing the acquisition, retention, and transmission of infectious diseases on textile products.

Radiative Cooling Nanofabric for Personal Thermal Management.

A wearable textile that is engineered to reflect incoming sunlight and allow the transmission of mid-infrared radiation simultaneously would have a great impact on the human body's thermal regulation in an outdoor environment. However, developing such a textile is a tough challenge. Using nanoparticle-doped polymer (zinc oxide and polyethylene) materials and electrospinning technology, we have developed a nanofabric with the desired optical properties and good applicability. The nanofabric offers a cool fibrous structure with outstanding solar reflectivity (91%) and mid-infrared transmissivity (81%). In an outdoor field test under exposure of direct sunlight, the nanofabric was demonstrated to reduce the simulated skin temperature by 9 °C when compared to skin covered by a cotton textile. A heat-transfer model is also established to numerically assess the cooling performance of the nanofabric as a function of various climate factors, including solar intensity, ambient air temperature, atmospheric emission, wind speed, and parasitic heat loss rate. The results indicate that the nanofabric can completely release the human body from unwanted heat stress in most conditions, providing an additional cooling effect as well as demonstrating worldwide feasibility. Even in some extreme conditions, the nanofabric can also reduce the human body's cooling demand compared with traditional cotton textile, proving this material as a feasible solution for better thermoregulation of the human body. The facile fabrication of such textiles paves the way for the mass adoption of energy-free personal cooling technology in daily life, which meets the growing demand for healthcare, climate change, and sustainability.

Development of Antiviral CVC (Chief Value Cotton) Fabric.

The outbreak of COVID-19 has already generated a huge societal, economic and political losses worldwide. The present study aims to investigate the antiviral activity of Poly(hexamethylene biguanide) hydrochloride (PHMB) treated fabric against COVID-19 by using the surrogate Feline coronavirus. The antiviral analysis indicated that up to 94% of coronavirus was killed after contacting the CVC fabric treated with PHMB for 2 h, which suggests that PHMB treated fabric could be used for developing protective clothing and beddings with antiviral activity against coronavirus and can play a role in fighting the transmission of COVID-19 in the high-risk places.

Study on the Development of Antiviral Spandex Fabric Coated with Poly(hexamethylene biguanide) Hydrochloride (PHMB).

The spread of COVID-19 has brought about huge losses around the world. This study aims to investigate the applicability of PHMB used for developing antiviral spandex clothing against coronavirus. PHMB was qualitatively determined on the surface of spandex fabrics by using BPB. The antiviral analysis shows that the PHMB-treated spandex fabric can kill 99% of the coronavirus within 2 h of contact, which suggests that the spandex fabric treated with PHMB could be used for developing antiviral clothing against coronaviruses for containing the transmission of COVID-19 in high-risk places. Furthermore, PHMB-treated spandex fabrics were shown excellent antibacterial activity against gram-positive S. aureus and gram-negative K. pneumoniae. The hand feel properties of Spandex fabric were not significantly affected by the PHMB coating in addition to the wrinkle recovery, which was obviously improved after PHMB coating.

Moisture-Wicking and Solar-Heated Coaxial Fibers with a Bark-like Appearance for Fabric Comfort Management.

Maintaining the human body's comfort is a predominant requirement of functional textiles, but there are still considerable drawbacks to design an intelligent textile with proper moisture absorption and evaporation properties. Herein, we develop moisture-wicking and solar-heated coaxial fibers with a bark-like appearance for fabric comfort management. The cortex layer of coaxial fibers can absorb moisture via the synergistic effect of the hierarchical roughness and the hydrophilic polymeric matrix. The core layer containing zirconium carbide nanoparticles can assimilate energy from the body and sunlight, which raises the surface temperature of the material and accelerates moisture evaporation. The resulting coaxial fiber-based membrane exhibits an excellent droplet diffusion radius of 2.73 cm, an excellent wicking height of 6.97 cm, and a high surface temperature of 61.7 °C which is radiated by simulated sunlight. Moreover, the designed fabric also exhibits a significant UV protection factor of 2000. Overall, the successful synthesis of such fascinating fibrous membranes enables the rapid removal of sweat from the human body textile, providing a suitable and comfortable microenvironment for the human body.

Graphene Oxide/Reduced Graphene Oxide Enhanced Noniridescent Structural Colors Based on Silica Photonic Spray Paints with Improved Mechanical Robustness.

In contrast to traditional pigment colors, structural colors have developed a great potential in practical applications, thanks to their unique nonfading and color tunable properties; especially amorphous photonic structures with noniridescent structural colors have attracted considerable attention and their applications have expanded to more fields. Herein, graphene oxide (GO) and reduced graphene oxide (RGO) enhanced noniridescent structural colors with excellent mechanical robustness were established by a time-saving approach named spray coating, which allows for rapid fabrication of angular independent structural colors by spraying different photonic spray paints (PSPs) to ensure color multiplicity that was adjusted by the silica nanoparticles (SiO2 NPs) sizes onto the substrates. The incorporation of poly(methyl methacrylate-butyl acrylate) (PMB) improved the adhesion existing among SiO2 inter-nanoparticles and between SiO2 NPs and the substrates, taking advantages of the low glass transition temperature (Tg) of butyl acrylate derivative polymer and made PMB embedded PSPs coated patterns being imparted with good mechanical robustness and abrasive resistance. The peculiar light adsorption of GO and RGO across visible light spectrum facilitate higher color saturation. The improvement in color saturation of GO and RGO doped PSPs is expected to boost the promising applications in structurally colored paintings, inks and other color-related optical fields.

A simple solution to recycle and reuse dental CAD/CAM zirconia block from its waste residuals.

Purpose To seek a simple solution that can recycle and regenerate dental CAD/CAM zirconia green blanks from its waste residuals.Methods Waste residuals (3M® Lava™ Plus HT) were pulverized after dry milling and cutting, and subsequently sieved before pickling in a 0.5 M nitric acid. These powders were then dry-pressed and pre-sintered into blocks at seven different temperatures in the range 800-1100 °C. New zirconia blocks flagged with the same batch numbers were used as control. These blocks were cut into bars before subjected them to manufacturer-recommended sintering at 1450 °C. Crystalline phases (by XRD), elemental compositions (by EDX), surface morphologies (by SEM), machinability, linear shrinkage rate, relative density, and Knoop microhardness were evaluated before and after sintering, and four-point flexural strengths were also evaluated for the sintered zirconia bars.Results Only tetragonal phases were found in both pre- and fully-sintered recycled zirconia blocks. SEM results showed that pre-sintered samples at 950 °C had smooth and flat surfaces with evenly distributed particles. Recycled and control zirconia blocks had similar elemental compositions. Results from machined surface, linear shrinkage rate, relative density, and Knoop microhardness established that 950 °C and 1000 °C were suitable pre-sintering temperatures for recycling zirconia. Pre-sintered recycled zirconia had no significant differences in flexural strengths, however, samples pre-sintered at 1000 °C exhibited the closest value (897 MPa) compared to that of the control (904 MPa).Conclusions Dental CAD/CAM zirconia can be recycled and reused from its waste residuals by adopting a simple method that requires a pre-sintering at 950 or 1000 °C.

Influence of pH-responsive compounds synthesized from chitosan and hyaluronic acid on dual-responsive (pH/temperature) hydrogel drug delivery systems of Cortex Moutan.

The polysaccharide-based pH-responsive compounds, namely, N,N,N-trimethyl chitosan (TMC), polyethylene glycolated hyaluronic acid (PEG-HA), and polysaccharide-based nano-conjugate of hyaluronic acid, chitosan oligosaccharide and alanine [HA-Ala-Chito(oligo)] were chemically synthesized using biopolymers chitosan and hyaluronic acid, and applied here to observe the changes in morphology, pH-stability, mechanical and drug-release behavior, and cytotoxicity of thermo-responsive polymer: Poloxamer 407 (PF127)-based drug delivery systems for traditional Chinese medicine Cortex Moutan (CM). The thermo-responsive hydrogel of PF127 loaded with CM (GelC) was used as control. The dual-responsive (pH/temperature) hydrogels: PF127/TMC/PEG-HA (Gel1) and PF127/HA-Ala-Chito(oligo) (Gel2) showed improved mechanical behavior as obtained by rheology and mechanical agitation study, and pH-stability under various external pH conditions, and those improvements occurred due to the addition of polysaccharide-based pH-responsive compounds in the systems. Both, Gel1 and Gel2 showed better morphology than GelC as obtained by SEM or TEM suggesting that interaction of polysaccharide-based pH-responsive compounds with PF127 in either gel or sol state gave better porous network structure in the hydrogels or more dispersed micellar arrangements in sol-state, respectively. Gel1 showed the highest cumulative drug release (86.5%) after 5 days under mild acidic condition (pH 6.4) suggesting that release behavior of a hydrogel drug carrier was dependent on morphology, mechanical behavior, and pH-stability. The transdermal release (ex-vivo) results indicated that gallic acid, the active marker of CM passed through porcine ear skin and all the formulations showed more or less similar transdermal release properties. The hydrogels loaded with CM showed no cytotoxicity (cell viability >90.0%) on human HaCaT keratinocytes within concentration range of 0.0-20.0 µg/ml as obtained by MTT assay, and cell viability was more than 100% at a concentration of 20.0 µg/ml for Gel2. The formulations without loaded drug namely, Gel1-CM and Gel2-CM exhibited strong anti-bacterial action against gram positive bacteria Staphylococcus aureus.

Reusable Face Masks as Alternative for Disposable Medical Masks: Factors that Affect their Wear-Comfort.

The coronavirus outbreak that commenced at the end of 2019 has led to a dramatic increase in the demand for face masks. In countries that are experiencing a shortage of face masks as a result of panic buying or inadequate supply, reusable fabric masks have become a popular option, because they are often considered more cost-effective and environmentally friendly than disposable medical masks. Nevertheless, there remains a significant variation in the quality and performance of existing face masks; not all are simultaneously able to provide protection against the extremely contagious virus and be comfortable to wear. This study aims to examine the influential factors that affect the comfort of reusable face masks, but not to assess the antimicrobial or antiviral potential. Seven types of masks were selected in this study and subjected to air and water vapor permeability testing, thermal conductivity testing and a wear trial. The results indicate that washable face masks made of thin layers of knitted fabric with low density and a permeable filter are more breathable. Additionally, masks that contain sufficient highly thermally conductive materials and have good water vapor permeability are often more comfortable to wear as they can transfer heat and moisture from the body quickly, and thus do not easily dampen and deteriorate.

Fabrication of Structural-Coloured Carbon Fabrics by Thermal Assisted Gravity Sedimentation Method.

Structural-coloured poly(styrene-methyl methacrylate-acrylic acid) (Poly(St-MMA-AA)) deposited carbon fabrics (Poly(St-MMA-AA)/PCFs) with fascinating colours (salmon, chartreuse, springgreen, skyblue, mediumpurple) changing with the (Poly(St-MMA-AA) nanoparticle sizes can be facilely fabricated by the thermal-assisted gravity sedimentation method that facilitates the self-assembly of Poly(St-MMA-AA) colloidal nanoparticles to generate photonic crystals. The particle sizes of Poly(St-MMA-AA) copolymer with core/shell structure varying from 308.3 nm to 213.1 nm were controlled by adjusting the amount of emulsifier during emulsion polymerisation. The presence of the intrinsic chemical information of Poly(St-MMA-AA) copolymer has been ascertained by Raman and Fourier Transform Infrared (FT-IR) Spectroscopy analysis. Colour variation of the as-prepared structural-coloured carbon fabrics (Poly(St-MMA-AA)/PCFs) before and after dipping treatment were captured while using an optical microscope. The structural colours of Poly(St-MMA-AA)/PCFs were assessed by calculating the diffraction bandgap according to Bragg's and Snell's laws. The Poly(St-MMA-AA) photonic crystal films altered the electrical properties of carbon fabrics with the resistivity growing by five orders of magnitude. The differential electrical resistivity between Poly(St-MMA-AA)/PCFs and wet Poly(St-MMA-AA)/PCFs combined with the corresponding tunable colours can be potentially applied in several promising areas, such as smart displays, especially signal warning displays for traffic safety.

Drug delivery system of dual-responsive PF127 hydrogel with polysaccharide-based nano-conjugate for textile-based transdermal therapy.

Pluronic F-127 based dual-responsive (pH/temperature) hydrogel drug delivery system was developed involving polysaccharide-based nano-conjugate of hyaluronic acid and chitosan oligosaccharide lactate and applied for loading of gallic acid which is the principal component of traditional Chinese medicine Cortex Moutan recommended in the treatment of atopic dermatitis. The polysaccharide-based nano-conjugate was used as pH-responsive compound in the formulation and its amphiphilic character was determined colorimetrically. Microstructure analysis by SEM and TEM indicated highly porous hydrogel network and well-dispersed micellar structures, respectively, after modification with the nano-conjugate, and so, release property of the hydrogel for drug was significantly improved. Different pH-conditions were applied here to see pH-responsiveness of the formulation and increase in acidity of external environment gradually diminished mechanical stability of the hydrogel and that was reflected on the drug release property. Rheology was performed to observe sol-gel transition of the formulation and showed better rheological properties after modification with nano-conjugate. In this study, the cytotoxicity results of PF127 based formulations loaded with/without gallic acid showed cell viability of > 80.0 % for human HaCaT keratinocytes in the concentration range of 0.0-20.0 µg/ml.

Dual-responsive (pH/temperature) Pluronic F-127 hydrogel drug delivery system for textile-based transdermal therapy.

A dual-responsive hydrogel (pH/temperature) was developed from a thermos-responsive polymer, pluronic F-127 (PF127), and pH-responsive polymers, N,N,N-trimethyl chitosan (TMC) and polyethylene glycolated hyaluronic acid (PEG-HA). Gallic acid, the principal component of the traditional Chinese drug Cortex Moutan was loaded into the hydrogel (PF127/TMC/PEG-HA) for possible application in textile-based transdermal therapy as Cortex Moutan has been proven to be an effective drug for the treatment of atopic dermatitis (AD). TMC and PEG-HA were synthesized, characterized (1H-NMR and FTIR), and added to the formulations to enhance drug release from the hydrogels, and increase the drug targeting of the carriers. The thermo-responsive properties of the hydrogel were assessed by dynamic viscosity analysis and the tube inversion method, and the pH-responsiveness of the formulation was determined by changing the pH of the external media. Rheology study of the hydrogels showed that complex viscosity and storage/loss moduli for PF127/TMC/PEG-HA hydrogel formulation are higher than PF127 hydrogel. The microstructure analysis by reflection SAXS indicated similar type of frozen inhomogeneity of hydrogel formulations. Various characterizations such as FTIR, SEM, TEM, zeta potential, and degradation of the hydrogel formulation indicated that the PF127/TMC/PEG-HA hydrogel showed better physico-chemical properties and morphology than did the PF127 hydrogel, and drug release was also higher for the PF127/TMC/PEG-HA hydrogel than for PF127. The drug release from hydrogels followed more closely first-order rate model than other rate models.

A Computer Color-Matching Study of Reverse Micellar Dyeing of Wool with Reactive Dyes.

Computer color-matching (CCM) and the levelness of poly(ethylene glycol)-based reverse-micellar dyed wool fabrics in octane and nonane were investigated and compared with a conventional water-based dyeing system. Reflectance curves and calibration curves exhibited no chromatic change and maintained high linearity in both dyeing systems. The linearity of water-dyed calibration curves was slightly higher than that of the reverse-micellar dyed curves. The color yield, in term of K/Ssum values, of solvent-dyed samples was found to be generally higher than that of water-based dyed samples at various calibrated dye concentrations. The concentrations predicted by CCM were close to the theoretical concentrations for both dyeing methods. This indicates that octane- and nonane-assisted reverse-micellar dyeing of wool is able to generate color recipes comparable to the conventional water-based dyeing system. The solvent-dyed samples, measured by the relative unlevelness indices (RUI), exhibit good-to-excellent levelness, which is highly comparable with the water-dyed samples.

Photoactive cotton fabric for UV protection and self-cleaning.

Development of textile materials with tailored properties by coating with nano-materials is an emerging field of research. The preparation and characterization of photoactive cotton fabric for UV protection and self-cleaning properties are reported herein. In this study, a photoactive sol comprising of a reactive blue dye, C.I. Reactive Blue 21 (RB-21), and TiO2 was prepared by using sol gel method. The TiO2 nano sol was mixed with RB-21 to extend its photocatalytic activity in the visible region of the solar spectrum. The cotton fabric was coated with the RB-21/TiO2 sol via dip-pad-dry-cure method. Surface characterization of the coated cotton fabric was performed by FTIR-ATR, UV-visible absorption, XRD and SEM studies. FTIR-ATR and UV-visible spectra confirmed stable attachment of the photoactive RB-21/TiO2 coating on the cotton fabric. SEM images and XRD pattern shown the presence of anatase TiO2 on the coated cotton fabric. UV-protection, photocatalytic performance and self-cleaning properties of the coated cotton fabric were evaluated by the UV transmittance spectra, degradation of Rhodamine B (RhB) dye and stain removal under visible light respectively. Degradation of RhB was observed in the presence of RB-21/TiO2 coated cotton when exposed to visible light. Moreover, the coated cotton fabrics displayed excellent UV protection properties.

Design of High-Performance Wearable Energy and Sensor Electronics from Fiber Materials.

A fiber material is composed of a group of flexible fibers that are assembled in a certain dimensionality. With its good flexibility, high porosity, and large surface area, it demonstrates a great potential in the development of flexible and wearable electronics. In this work, a kind of nickel/active material-coated flexible fiber (NMF) electrodes, such as Ni/MnO2/reduced graphene oxide (rGO) NMF electrodes, Ni/carbon nanotube (CNT) NMF electrodes, and Ni/G NMF electrodes, is developed by a new general method. In contrast with previous approaches, it is for the first time that porous and rich hydrophilic structures of fiber materials have been used as the substrate to fully absorb active materials from their suspension or slurry and then to deposit a Ni layer on active material-coated fiber materials. The proposed processes of active material dip-coating and then Ni electroless plating not only greatly enhance the electrical conductivity and functional performance of fiber materials but also can be applied to an extensive diversity of fiber materials, such as fabrics, yarns, papers, and so on, with outstanding flexibility, lightweight, high stability, and conductivity for making kinds of energy and sensor devices. As demonstration, a two-dimensional (2D) Ni/MnO2/rGO NMF electrode is obtained for supercapacitors, showing excellent electrochemical performance for energy storage. Then, Ni/CNT NMF electrodes with different dimensionalities, including one-dimensional fiber-shaped, 2D plane, and three-dimensional spatial, are fabricated as various tensile and compressive strain sensors for observation of human's movements and health. Finally, a 2D Ni/graphene NMF electrode is developed for assembling triboelectric nanogenerators for mechanical energy harvesting. Benefiting from wearable property of the textile substrates, the obtained NMF electrodes are expected to be designed into kinds of wearable devices for the future practical applications. The NMF electrode designed in this work provides a simple, stable, and effective approach for designing and fabricating wearable energy and sensor electronics from fiber materials.

Preparation and Characterization of Electrospun PAN/PSA Carbonized Nanofibers: Experiment and Simulation Study.

In this study, we simulated the electric field distribution of side-by-side electrospinning by using the finite element method (FEM), and studied the effects of spinneret wall thickness, spinning voltage and receiving distance on the distribution of the electrostatic field. The receiving distance was selected as a variable in the experimental, a series of PAN/PSA composite nanofiber membranes were prepared by using a self-made side by side electrospinning device. The membranes were tested by Fourier-transform infrared (FTIR), thermogravimetric analysis (TG), and scanning electron microscope (SEM). The prepared membranes were also treated by high-temperature treatment, and the change of fiber diameter and conductivity of the membrane before and after high-temperature treatment were studied. It was found that the PAN/PSA carbonized nanofibers could achieve a better performance in heat resistance and conductivity at 200 mm receiving distance.