Temporal characteristics and health effects related to NO2, O3, and SO2 in an urban area of Iran.

This study reports on temporal variations of NO2, O3, and SO2 pollutants and their related health effects in urban air of Khorramabad, Iran using AirQ 2.2.3 software. Based on data between 2015 and 2021, hourly NO2, O3, and SO2 concentrations increase starting at 6:00 a.m. local time until 9:00 p.m., 3:00 p.m., and 7:00 p.m. local time, respectively, before gradually decreasing. The highest monthly NO2, O3, and SO2 concentrations are observed in October, August, and September, respectively. Annual median NO2, O3, and SO2 concentrations range between 17 ppb and 38.8 ppb, 17.5 ppb-36.6 ppb, and ∼14 ppb-30.8 ppb, respectively. Two to 93 days and 17-156 days between 2015 and 2021 exhibit daily concentrations of NO2 and SO2 ≤ WHO AQGs, respectively, while 187-294 days have 8-h maximum O3 concentrations ≤ WHO AQGs. The mean excess mortality ascribed to respiratory mortality, cardiovascular mortality, hospital admissions for COPD, and acute myocardial infraction are 121, 603, 39, and 145 during 2015-2021, respectively. O3 is found to exert more significant health effects compared to SO2 and NO2, resulting in higher cardiovascular mortality. The gradual increase in NO2 and possibly O3 over the study period is suspected to be due to economic sanctions, while SO2 decreased due to regulatory activity. Sustainable control strategies such as improving fuel quality, promoting public transportation and vehicle retirement, applying subsidies for purchase of electric vehicles, and application of European emission standards on automobiles can help decrease target pollutant levels in ambient air of cities in developing countries.

A comparative study on antibacterial activity of carvacrol and glutaraldehyde on Pseudomonas aeruginosa and Staphylococcus aureus isolates: an in vitro study.

The resistance of hospital bacterial isolates against traditional germicides, which used frequently, is one of the important factors contributing to emerging nosocomial infections. Moreover, due to having the side effects of chemical substances, the development of novel low-risk natural compounds seems necessary for control the spread of resistant pathogens in hospital environments. The aim of this study was to compare the effect of carvacrol and glutaraldehyde against two common hospital acquired pathogens, including Pseudomonas aeruginosa and Staphylococcus aureus. In this study 365 samples were collected from different wards of hospitals of Khorramabad, Iran. One hundred and sixty samples were identified as P. aeruginosa and S. aureus by using standard microbiological methods. Then the antibacterial effects of four combinations including carvacrol+ethanol, carvacrol+dimethyl sulfoxide (DMSO), glutaraldehyde 2%, and pure glutaraldehyde (50%) were evaluated and determined using dilution broth and disk diffusion methods. Our results showed that the carvacrol had more antibacterial effects against selected bacteria compared to glutaraldehyde. Moreover, the optimal time and concentration of carvacrol+ethanol against hospital isolates of P. aeruginosa and S. aureus was determined after 1 h at concentration of 64 µl/ml and 8 µl/ml, respectively. In conclusion by comparing the results of carvacrol and glutaraldehyde, seem that carvacrol, as an herbal and natural agent, may be a suitable alternative to glutaraldehyde in hospital equipment's' sterilization.

Dose-response meta-analysis of arsenic exposure in drinking water and hypertension.

BACKGROUND: Based on the cross-sectional and cohort studies, exposure to As via drinking water can cause hypertension. METHODS: We searched PubMed, ISI WOS, and Scopus for relevant studies up to 1 January 2018 using related keywords. The meta-analysis was done on 10 studies (n = 28255) that report Odds Ratio for hypertension. The extracted ORs between As concentration and hypertension were pooled using random effect models. Study heterogeneity was analyzed using I 2. RESULTS: The estimated adjusted OR for association between As and hypertension was 1.44 (95% CI: 1.12, 1.84) with I 2 = 71%. Dose-Response analysis showed a linear relationship between As and hypertension (OR = 1.0008 95% CI: 1.0003, 1.001). In general, by increase of each unit in arsenic concentration, odds of the hypertension would increase as 0.08%. CONCLUSION: There was a significant relationship between As exposure and hypertension.

Qualitative and quantitative analysis of municipal solid waste in Iran for implementation of best waste management practice: a systematic review and meta-analysis.

With the rapid growth of population, development of different industries, and production of several ranges of products, the generation of municipal solid waste (MSW) has been growing significantly in the recent years. However, if MSW is not managed properly, it can greatly contribute to an environmental crisis. In the present study, we aimed to examine the characteristics and quantity of MSW generated in Iran through a meta-analysis and systematic review. The major international and Iranian national databases including Science direct, Scopus, PubMed, Google scholar, and SID and Magiran were searched completely using appropriate keywords to identify the articles that have been published from 2003 up to November 2019 on the topic on interest. Based on the inclusion criteria, a number of 13 papers were found eligible to be reviewed in this study. The results showed that the amount of generated waste per capita in Iran is 839 g/capita/day. Moreover, organic matters, paper and cardboard, plastics, glasses, textiles, rubber, polyethylene terephthalate (PET), metals (ferrous and non-ferrous), wood materials, and other wastes were found to be contributed to 65.85%, 8.79%, 8.39%, 2.73%, 2.74%, 1.18%, 1.07%, 2.83%, 1.20%, and 5.22% of total MSW in Iran, respectively. Due to the high level of organic waste in MSW stream in Iran, composting program is recommended as a practical and beneficial approach. Of note, the recyclable materials include plastic, PET, glass, metals, and paper and cardboard have accounted for 24.05% of total MSW in Iran.

Non-Carcinogenic Health Risk Assessment due to Fluoride Exposure from Tea Consumption in Iran Using Monte Carlo Simulation.

Excessive intake of fluoride can cause adverse health effects. Consumption of tea as a popular drink could be a potential source of fluoride exposure to humans. This research aimed to evaluate the fluoride concentration in tea among the Iranian people using the available data in the literature and to assess the health risk related to the consumption of tea in men, women, and children. The health risk assessment was conducted using the chronic daily intake and hazard quotient according to the approach suggested by the Environmental Protection Agency. The fluoride content in published studies varied noticeably, ranging from 0.13 to 3.27 mg/L. The results revealed that the hazard quotient (HQ) in age groups of women (21-72 years) and children (0-11 years) was within the safe zone (HQ < 1) which showed that there was no potential of non-carcinogenic risk associated with drinking tea in these groups. However, in one case of the men (21-72 years), the HQ > 1 which shows a probable risk of fluorosis. The order of non-carcinogenic health risks in the studied groups was in the order of men > women > children. The results of this can be useful for organizations with the responsibility of human health promotion.

Data on the bisphenol A adsorption from aqueous solutions on PAC and MgO~PAC crystals.

The compounds of endocrine disrupting are one of the important pollutants in the environment. These pollutants, even at extremely low concentrations, have significant effects on humans, animals and the environment. The main goal of this work was to study the performance activated carbon coated with MgO in the bisphenol A adsorption from aqueous solutions. The leading variables investigated were initial concentration of bisphenol A (20-100 mg/L), PAC and MgO~PAC (2-6 g), contact time (10-60 min), and pH (3-11). The residue concentration of bisphenol A was measured by temperature High-Performance Liquid Chromatography. The maximum adsorption of bisphenol A over PAC and MgO~PAC crystals was 9.2 mg/g and 22.28 mg/g, respectively. Based on BET, the surface area of PAC and MgO~PAC crystals were found to be 450.3 m2/g and 378.21 m2/g, respectively. By increasing initial concentration of bisphenol A, the adsorption decreased. The study findings showed that the Langmuir model and the pseudo-second-order model were a fit model to the experimental data, respectively.

Data on the fluoride adsorption from aqueous solutions by metal-organic frameworks (ZIF-8 and Uio-66).

The variables examined were initial fluoride concentration, ZIF-8 and Uio-66 dosage, pH, and contact time. The residual concentration of fluoride was measured by a spectrophotometer. According to BET, the specific surface area of the ZIF-8 and Uio-66 was 1050 m2/g and 800 m2/g, respectively. Total pore volume and average pore diameter of the ZIF-8 and Uio-66 were 0.57 cm3/g, 0.45 cm3/g and 4.5 nm, 3.2 nm, respectively. The best pH for fluoride adsorption was neutral conditions. By increasing the ZIF-8 and Uio-66 dose, the fluoride uptake increased at first, but then decreased. Also, the maximum adsorption for ZIF-8 and Uio-66 was observed in adsorbent dose 0.2 and 0.6 g/L, respectively. The best model for describing kinetic and isotherms of fluoride adsorption were the pseudo-second-order model and Langmuir isotherm model, respectively. Based on the Langmuir model, the adsorption capacity of fluoride by ZIF-8 and Uio-66 was reported to be 25 mg/g and 20 mg/g, respectively.

Data on biosurfactant assisted removal of TNT from contaminated soil.

Contamination of environment, especially soil, is in great concern and can cause health problems. Thus, remediation of these pollutants through environmentally friendly methods should be considered. The aim of this data was bioremediation of TNT from contaminated soil. Two plastic pans were used as bioreactor. In each pan, 3 kg of soil was used. Concentration of TNT in contaminated soil was 1000 mg/kg. Rhamnolipid in concentration of 60 mg/l was added to intended pan. Sampling was done in each two weeks. In order to assessment of TNT degradation, samples were analyzed with HPLC. The data showed that after 154 days of experiment, TNT removal in soil that amended with rhamnolipid was 73% and in experiment with no addition of rhamnolipid was 58%. Based on the obtained data rhamnolipid was effective in remediation of TNT contaminated soil.

Data on the alizarin red S adsorption from aqueous solutions on PAC, treated PAC, and PAC/γ≈Fe2O3.

Three types of adsorbents of powdered activated carbon (PAC), treated PAC, and PAC/γ ≈ Fe2O3 nanocomposite were used. The adsorption experiments were performed in batch conditions. pHZPC of PAC/γ ≈ Fe2O3 was 6.7. As a result, at lower than pHZPC, acidic pH, the adsorption of alizarin red S on PAC/γ ≈ Fe2O3 was favourable. The maximum of alizarin red S adsorption of PAC, treated PAC, and PAC/γ ≈ Fe2O3 was 24.5 mg/g, 57.8 mg/g, and 112.56 mg/g, respectively. The models of Langmuir and pseudo-first-order were a fit model to describe the adsorption isotherm and the Kinetic, respectively. The PAC/γ ≈ Fe2O3 is a promising class of the adsorbents in the adsorption of various dyes from textile effluents.

Data on physicochemical quality of drinking water in the rural area in Divandarreh county, Kurdistan, Iran.

Good quality of drinking water is very important in the maintenance of human health. The gathered data from the present work was used to evaluate the quality of drinking water resources in the rural villages of Divandarreh, Iran. Physicochemical quality of water was determined by a collection of 35 random samples during dry and rainy seasons in 2015. The APHA approach was used to determine the physicochemical parameters of the samples. The results showed that the average concentration of Ca, Mg, Na, K, Cl, SO4, TDS and TH during dry season was 85.64 mg/l, 13.41 mg/l, 34.11 mg/l, 2.8 mg/l, 9.9 mg/l, 45.7 mg/l, 326.06 mg/l and 269.61 mg/l, respectively. Also, the average concentration of the parameters during rainy season was 77.3 mg/l, 18.27 mg/l, 30.3 mg/l, 1.9 mg/l, 12.54 mg/l, 39 mg/l, 269.1 mg/l and 316.17 mg/l, respectively.

Experimental data of electric coagulation and photo-electro-phenton process efficiency in the removal of metronidazole antibiotic from aqueous solution.

Pharmaceutical products, particularly antibiotics, due to their cumulative characteristics, undesirable effects and creating drug resistances, as inevitably pollutants, poses a major concern in environmental issues. In recent years, advanced oxidation processes (AOP) have been considerably used for degradation of new and emerging pollutants such as residual medications and resistant compounds in water and wastewater. Present investigation evaluates the removal of metronidazole from aqueous solution by electro coagulation and photoelectrophenton processes. The data will be informative for environmental agencies, pharmaceutical companies and wastewater treatment companies for choosing it as a practical oxidation advance process for treatment of water polluted by resistant material (drugs and pesticides).

Kinetic parameters and nitrate, nitrite changes in bioremediation of Toxic Pentaerythritol Tetranitrate (PETN) contaminated soil.

BACKGROUND: Cleanup of areas contaminated by explosives is a public health concern. Some explosives can be carcinogenic in humans. Pentaerythritol Tetranitrate (PETN), a powerful explosive with very low water solubility, can be easily transported to ground waters. OBJECTIVE: This study was conducted to determine the removal efficiencies of PETN from soil by bioremediation, and obtain kinetic parameters of biological process. METHODS: This experimental study was conducted at the Environmental Health Engineering Lab (Isfahan University of Medical Sciences, Isfahan, Iran) in 2015-2016. In the present work, bioremediation of the explosive-polluted soils by PETN in anaerobic-aerobic landfarming method was performed. The influence of seeding and biosurfactant addition on bioremediation was also evaluated. The data were analyzed using Microsoft Excel software. RESULTS: The results show that, as the initial concentration of PETN increased, the lag phase was increased and the specific growth rate was increased up to 0.1/day in concentration of 50 mg/kg, and then it was decreased to 0.04/day. Subsequent decreases in specific growth rate can cause substrate inhibition. Seeding causes decrease in lag phase significantly. Biosurfactant addition had little to no impact on the length of lag phase, but biosurfactant plus seeding can increase the growth rate to 0.2/day, however, inhibitory effect of the initial concentration was started in very high concentration of PETN (150 mg/kg). CONCLUSION: Biosurfactant addition and seeding together have an impressive effect on biodegradation of PETN, furthermore seeding can enhance active microbial consortium and biosurfactant can improve the poor aqueous solubility of PETN, therefore making the substrate more accessible.