RESUMO
The electrochemical reduction of carbon dioxide to formic acid is a promising pathway to improve CO2 utilization and has potential applications as a hydrogen storage medium. In this work, a zero-gap membrane electrode assembly architecture is developed for the direct electrochemical synthesis of formic acid from carbon dioxide. The key technological advancement is a perforated cation exchange membrane, which, when utilized in a forward bias bipolar membrane configuration, allows formic acid generated at the membrane interface to exit through the anode flow field at concentrations up to 0.25 M. Having no additional interlayer components between the anode and cathode this concept is positioned to leverage currently available materials and stack designs ubiquitous in fuel cell and H2 electrolysis, enabling a more rapid transition to scale and commercialization. The perforated cation exchange membrane configuration can achieve >75% Faradaic efficiency to formic acid at <2 V and 300 mA/cm2 in a 25 cm2 cell. More critically, a 55-hour stability test at 200 mA/cm2 shows stable Faradaic efficiency and cell voltage. Technoeconomic analysis is utilized to illustrate a path towards achieving cost parity with current formic acid production methods.
RESUMO
Developing low platinum-group-metal (PGM) catalysts for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs) for heavy-duty vehicles (HDVs) remains a great challenge due to the highly demanded power density and long-term durability. This work explores the possible synergistic effect between single Mn site-rich carbon (MnSA-NC) and Pt nanoparticles, aiming to improve intrinsic activity and stability of PGM catalysts. Density functional theory (DFT) calculations predicted a strong coupling effect between Pt and MnN4 sites in the carbon support, strengthening their interactions to immobilize Pt nanoparticles during the ORR. The adjacent MnN4 sites weaken oxygen adsorption at Pt to enhance intrinsic activity. Well-dispersed Pt (2.1 nm) and ordered L12-Pt3Co nanoparticles (3.3 nm) were retained on the MnSA-NC support after indispensable high-temperature annealing up to 800 °C, suggesting enhanced thermal stability. Both PGM catalysts were thoroughly studied in membrane electrode assemblies (MEAs), showing compelling performance and durability. The Pt@MnSA-NC catalyst achieved a mass activity (MA) of 0.63 A mgPt-1 at 0.9 ViR-free and maintained 78% of its initial performance after a 30,000-cycle accelerated stress test (AST). The L12-Pt3Co@MnSA-NC catalyst accomplished a much higher MA of 0.91 A mgPt-1 and a current density of 1.63 A cm-2 at 0.7 V under traditional light-duty vehicle (LDV) H2-air conditions (150 kPaabs and 0.10 mgPt cm-2). Furthermore, the same catalyst in an HDV MEA (250 kPaabs and 0.20 mgPt cm-2) delivered 1.75 A cm-2 at 0.7 V, only losing 18% performance after 90,000 cycles of the AST, demonstrating great potential to meet the DOE targets.
RESUMO
Nanoparticles are an important class of materials that exhibit special properties arising from their high surface area-to-volume ratio. Scanning transmission electron microscopy (STEM) has played an important role in nanoparticle characterization, owing to its high spatial resolution, which allows direct visualization of composition and morphology with atomic precision. This typically comes at the cost of sample size, potentially limiting the accuracy and relevance of STEM results, as well as the ability to meaningfully track changes in properties that vary spatially. In this work, automated STEM data acquisition and analysis techniques are employed that enable physical and compositional properties of nanoparticles to be obtained at high resolution over length scales on the order of microns. This is demonstrated by studying the localized effects of potential cycling on electrocatalyst degradation across proton exchange membrane fuel cell cathodes. In contrast to conventional, manual STEM measurements, which produce particle size distributions representing hundreds of particles, these high-throughput automated methods capture tens of thousands of particles and enable nanoparticle size, number density, and composition to be measured as a function of position within the cathode. Comparing the properties of pristine and degraded fuel cells provides statistically robust evidence for the inhomogeneous nature of catalyst degradation across electrodes. These results demonstrate how high-throughput automated STEM techniques can be utilized to investigate local phenomena occurring in nanoparticle systems employed in practical devices.
RESUMO
The recent surge in interest of proton exchange membrane fuel cells (PEMFCs) for heavy-duty vehicles increases the demand on the durability of oxygen reduction reaction electrocatalysts used in the fuel cell cathode. This prioritizes efforts aimed at understanding and subsequently controlling catalyst degradation. Identical-location scanning transmission electron microscopy (IL-STEM) is a powerful method that enables precise characterization of degradation processes in individual catalyst nanoparticles across various stages of cycling. Recreating the degradation processes that occur in PEMFC membrane electrode assemblies (MEAs) within the aqueous cell used for IL-STEM experiments is vital for generating an accurate understanding of these processes. In this work, we investigate the type and degree of catalyst degradation achieved by cycling in an aqueous cell compared to a PEMFC MEA. While significant degradation is observed in IL-STEM experiments performed on a traditional Pt catalyst using the standard accelerated stress test potential window (0.6-0.95 VRHE), degradation of a PtCo catalyst designed for heavy-duty vehicle use is very limited compared to that observed in MEAs. We therefore explore various experimental parameters such as temperature, acid type, acid concentration, ionomer content, and potential window to identify conditions that reproduce the degradation observed in MEAs. We find that by extending the cycling potential window to 0.4-1.0 VRHE in an electrolyte containing Pt ions, the degraded particle size distribution and alloy composition better match that observed in MEAs. In particular, these conditions increase the relative contribution of Ostwald ripening, which appears to play a more significant role in the degradation of larger alloy particles supported on high-surface-area carbons than coalescence. Results from this work highlight the potential for discrepancies between ex situ aqueous experiments and MEA tests. While different catalysts may require a unique modification to the AST protocol, strategies provided in this work enable future in situ and identical-location experiments that will play an important role in the development of robust catalysts for heavy-duty vehicle applications.
RESUMO
To increase the commercialization of fuel cell electric vehicles, it is imperative to improve the activity and performance of electrocatalysts through combined efforts focused on material characterization and device-level integration. Obtaining fundamental insights into the ongoing structural and compositional changes of electrocatalysts is crucial for not only transitioning an electrode from its as-prepared to functional state, also known as "conditioning", but also for establishing intrinsic electrochemical performances. Here, we investigated several oxygen reduction reaction (ORR) electrocatalysts via in situ and ex situ characterization techniques to provide fundamental insights into the interfacial phenomena that enable peak ORR mass activity and high current density performance. A mechanistic understanding of a fuel cell conditioning procedure is described, which encompasses voltage cycling and subsequent voltage recovery (VR) steps at low potential. In particular, ex situ membrane electrode assembly characterization using transmission electron microscopy and ultra-small angle X-ray scattering were performed to determine changes in carbon and Pt particle size and morphology, while in situ electrochemical diagnostics were performed either during or after specific points in the testing protocol to determine the electrochemical and interfacial changes occurring on the catalyst surface responsible for oxygen transport resistances through ionomer films. The results demonstrate that the voltage cycling (break-in) step aids in the removal of sulfate and fluoride and concomitantly reduces non-Fickian oxygen transport resistances, especially for catalysts where Pt is located within the pores of the carbon support. Subsequent low voltage holds at low temperature and oversaturated conditions, i.e., VR cycles, serve to improve mass activities by a factor of two to three, through a combined removal of contaminants, surface-blocking species (e.g., oxides), and rearrangement of the catalyst atomic structure (e.g., Pt-Pt and Pt-Co coordination).
Assuntos
Fontes de Energia Elétrica , Eletrodos , Catálise , Técnicas Eletroquímicas , Oxirredução , Oxigênio/química , Tamanho da Partícula , Platina/químicaRESUMO
We present an investigation of the structure and rheological behavior of catalyst inks for low-temperature polymer electrolyte membrane water electrolyzers. The ink consists of iridium oxide (IrO2) catalyst particles and a Nafion ionomer dispersed in a mixture of 1-propanol and water. The effects of ionomer concentration and catalyst concentration on the microstructure of the catalyst ink were studied. Studies on dilute inks (0.1 wt % IrO2) using zeta potential and dynamic light scattering measurements indicated a strong adsorption of the ionomer onto the catalyst particles which resulted in an increase in the ζ-potential and the z-average diameter. Steady-shear and dynamic-oscillatory-shear rheological measurements of concentrated IrO2 dispersions (35 wt % IrO2) indicated that the particles are strongly agglomerated in the absence of the ionomer. The addition of even a small amount of the ionomer (2.4 wt % with respect to total solids) caused the rheology to transition from shear thinning to Newtonian because of the reduction in agglomerated structure due to stabilization of the aggregates by the ionomer, consistent with the behavior of dilute inks. At intermediate ionomer loadings, between 2.4 and 9 wt %, the viscosity increased with increasing ionomer wt %, though remained Newtonian, predominantly due to the increasing ionomer volume fraction in the ink. For ionomer loadings greater than 9 wt %, the particles were found to be flocculated, likely induced by a dispersed ionomer. The flocculated inks exhibited strong shear-thinning and gel-like behaviors in steady-shear and oscillatory-shear rheology. The onset of flocculation was found to be sensitive to the catalyst concentration, where below 35 wt % of IrO2, flocculation was not observed. The rheological observations were further verified by ultra-small-angle X-ray scattering.
RESUMO
In situ electrochemical diagnostics designed to probe ionomer interactions with platinum and carbon were applied to relate ionomer coverage and conformation, gleaned from anion adsorption data, with O2 transport resistance for low-loaded (0.05 mgPt cm-2) platinum-supported Vulcan carbon (Pt/Vu)-based electrodes in a polymer electrolyte fuel cell. Coupling the in situ diagnostic data with ex situ characterization of catalyst inks and electrode structures, the effect of ink composition is explained by both ink-level interactions that dictate the electrode microstructure during fabrication and the resulting local ionomer distribution near catalyst sites. Electrochemical techniques (CO displacement and ac impedance) show that catalyst inks with higher water content increase ionomer (sulfonate) interactions with Pt sites without significantly affecting ionomer coverage on the carbon support. Surprisingly, the higher anion adsorption is shown to have a minor impact on specific activity, while exhibiting a complex relationship with oxygen transport. Ex situ characterization of ionomer suspensions and catalyst/ionomer inks indicates that the lower ionomer coverage can be correlated with the formation of large ionomer aggregates and weaker ionomer/catalyst interactions in low-water content inks. These larger ionomer aggregates resulted in increased local oxygen transport resistance, namely, through the ionomer film, and reduced performance at high current density. In the water-rich inks, the ionomer aggregate size decreases, while stronger ionomer/Pt interactions are observed. The reduced ionomer aggregation improves transport resistance through the ionomer film, while the increased adsorption leads to the emergence of resistance at the ionomer/Pt interface. Overall, the high current density performance is shown to be a nonmonotonic function of ink water content, scaling with the local gas (H2, O2) transport resistance resulting from pore, thin film, and interfacial phenomena.
RESUMO
The evolution of Pt-Ni nanoparticles supported on amorphous carbon is investigated before and after electrochemical potential cycling (0.6-1.1 V), using aberration-corrected scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS). During voltage cycling and due to the dissolution of nanoparticles, single ions/atoms and ionic/atomic clusters emerge and diffuse across the carbon support toward larger nanoparticles, where they redeposit. We observe that the preferred locations for the dissolution are the steps and corners of the nanoparticles. On the other hand, the redeposition process happens often on {111} type planes. In addition, contrary to the conventional view, where larger particles grow isotropically from smaller ones, this research work shows that anisotropic growth of smaller particles occurs during potential cycling. The reason for this behavior seems to be related to the fact that smaller particles with thicker Pt-rich shells trigger the nucleation and deposition of Pt.
RESUMO
We present a rheological investigation of fuel cell catalyst inks. The effects of ink parameters, which include carbon black-support structure, Pt presence on carbon support (Pt-carbon), and ionomer (Nafion) concentration, on the ink microstructure of catalyst inks were studied using rheometry in combination with ultrasmall-angle X-ray scattering (USAXS) and dynamic light scattering (DLS). Dispersions of a high-surface-area carbon (HSC), or Ketjen black type, demonstrated a higher viscosity than Vulcan XC-72 carbon due to both a higher internal porosity and a more agglomerated structure that increased the effective particle volume fraction of the inks. The presence of Pt catalyst on both the carbon supports reduced the viscosity through electrostatic stabilization. For carbon-only dispersions (without Pt), the addition of ionomer up to a critical concentration decreased the viscosity due to electrosteric stabilization of carbon agglomerates. However, with Pt-carbon dispersions, the addition of ionomer showed contrasting behavior between Vulcan and HSC supports. In the Pt-Vulcan dispersions, the effect of ionomer addition on the rheology was qualitatively similar to Vulcan dispersions without Pt. The Pt-HSC dispersions showed an increased viscosity with ionomer addition and a strong shear-thinning nature, indicating that Nafion likely flocculated the Pt-HSC aggregates. These results were verified using DLS and USAXS. Further, the observations of the effect of ionomer:carbon ratio and a comparison between carbons of different surface areas provided insights on the microstructure of the catalyst ink corresponding to the optimized I/ C ratio for fuel cell performance reported in the literature.
RESUMO
Polymer electrolyte fuel cells (PEFCs) are a promising high-efficiency energy conversion technology, but their cost-effective implementation, especially for automotive power, has been hindered by degradation of the electrochemically active surface area (ECA) of the Pt nanoparticle electrocatalysts. While numerous studies using ex situ post-mortem techniques have provided insight into the effect of operating conditions on ECA loss, the governing mechanisms and underlying processes are not fully understood. Toward the goal of elucidating the electrocatalyst degradation mechanisms, we have followed Pt nanoparticle growth during potential cycling of the electrocatalyst in an aqueous acidic environment using in situ anomalous small-angle X-ray scattering (ASAXS). ASAXS patterns were analyzed to obtain particle size distributions (PSDs) of the Pt nanoparticle electrocatalysts at periodic intervals during the potential cycling. Oxide coverages reached under the applied potential cycling protocols were both calculated and determined experimentally. Changes in the PSD, mean diameter, and geometric surface area identify the mechanism behind Pt nanoparticle coarsening in an aqueous environment. Over the first 80 potential cycles, the dominant Pt surface area loss mechanism when cycling to 1.0-1.1 V was found to be preferential dissolution or loss of the smallest particles with varying extents of reprecipitation of the dissolved species onto existing particles, resulting in particle growth, depending on potential profile. Correlation of ASAXS-determined particle growth with both calculated and voltammetrically determined oxide coverages demonstrates that the oxide coverage is playing a key role in the dissolution process and in the corresponding growth of the mean Pt nanoparticle size and loss of ECA. This understanding potentially reduces the complex changes in PSD and ECA resulting from various voltage profiles to a response dependent on oxide coverage.
Assuntos
Técnicas Eletroquímicas , Nanopartículas/química , Platina/química , Catálise , Fontes de Energia Elétrica , Eletrólitos/química , Tamanho da Partícula , Espalhamento a Baixo Ângulo , Propriedades de Superfície , Difração de Raios XRESUMO
The electrocatalytic site FeN4, which is active towards the oxygen reduction reaction, is incorporated into the graphene layer of aligned carbon nanotubes prepared through a chemical vapour deposition process, as is confirmed by X-ray absorption spectroscopy and other characterization techniques.
RESUMO
The ability to tune interparticle spatial properties of nanoparticle assemblies is essential for the design of sensing materials toward desired sensitivity and selectivity. This paper reports findings of an investigation of molecularly mediated thin film assemblies of metal nanoparticles with controllable interparticle spatial properties as a sensing array. The interparticle spatial properties are controlled by a combination of alpha,omega-difunctional alkyl mediators (X-(CH(2))(n)-X) such as alkyl dithiols, dicarboxylate acids, and alkanethiol shells capped on nanoparticles. Alkanethiolate-capped gold and gold-silver alloy nanoparticles (2-3 nm) were studied as model building blocks toward the thin film assemblies, whereas the variation of alkyl chain length manipulates the interparticle spacing. The thin films assembled on an interdigitated microelectrode array platform are characterized for determining their responses to the sorption of volatile organic compounds (VOCs). The correlation between the response sensitivity and the interparticle spacing properties revealed not only a clear dependence of the sensitivity on alkyl chain length but also the occurrence of a dramatic change of the sensitivity in a region of chain length for the alkyl mediator comparable with that of the capping alkyl chains. This finding reflects a balance between the interparticle chain-chain cohesive interdigitation and the nanostructure-vapor interaction which determines the relative change of the electrical conductivity of the inked nanoparticle thin film in response to vapor sorption. The results, along with statistical analysis of the sensor array data in terms of sensitivity and selectivity, have provided important insights into the detailed delineation between the interparticle spacing and the nanostructured sensing properties.
Assuntos
Nanopartículas Metálicas/química , Compostos Orgânicos/análise , Ligas/química , Ácidos Carboxílicos/química , Ouro/química , Compostos Orgânicos/química , Prata/química , Compostos de Sulfidrila/química , Termodinâmica , VolatilizaçãoRESUMO
This paper describes the results of an investigation of the interparticle interactions and reactivities in the assembly of gold nanoparticles mediated by cyanine dyes. The combination of the positively charged indolenine cyanine dyes and the negatively charged gold nanoparticles is shown to form a J-aggregate bridged assembly of nanoparticles, in addition to hydrophobic interparticle and electrostatic dye-particle interactions. Such interparticle interactions and reactivities are studied by probing the absorption of J-aggregates and fluorescence from the dyes and the surface plasmon resonance absorption from the nanoparticles. The J-aggregation of the dyes adsorbed on the nanoparticles is shown to play an important role in the assembly of nanoparticles. The spectral evolution of the J-band of the dyes and the surface plasmon resonance band of the nanoparticles was found to be sensitive to the nature of the charge and the structure of the dyes. The fluorescence quenching for the dyes was shown to be quantitatively related to the surface coverage of the dyes on the nanocrystal surfaces. These findings have provided important information for assessing a two-step process involving a rapid adsorption of the dyes on the nanoparticles and a subsequent assembly of the nanoparticles involving a combination of interparticle J-aggregation and hydrophobic interactions of the adsorbed dyes. The results are discussed in terms of the structural effects of the dyes, and the interparticle molecular interactions and reactivities, which provide important physical and chemical insights into the design of dye-nanoparticle structured functional nanomaterials.
Assuntos
Carbocianinas/química , Ouro/química , Nanopartículas Metálicas/química , Adsorção , Nanopartículas Metálicas/ultraestrutura , Microscopia Eletrônica de Transmissão , Estrutura Molecular , Espectrofotometria , Eletricidade EstáticaRESUMO
This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.
Assuntos
Ouro/química , Nanoestruturas/química , Prata/química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
This paper reports novel findings of an investigation of the formation of water-soluble iron oxide nanoparticles from iron-storage protein ferritin. The strategy couples thermal removal of the protein shell on a planar substrate and subsequent sonication in aqueous solution under controlled temperature. Advantages of using ferritin as a precursor include well-defined core size, core composition, water-solubility and processibility. The formation of the nanoparticles was characterized using TEM, UV-Vis and FTIR techniques. Iron oxide nanoparticles in the size range of 5-20 nm diameters were produced. In addition to thermal treatment conditions, the sonication temperature of the nanoparticles in water was found to play an important role in determining the resulting particle size. This simple and effective route has important implications to the design of composite nanoparticles for potential magnetic, catalytic, biomedical sensing and other nanotechnological applications.
Assuntos
Ferritinas/isolamento & purificação , Nanotecnologia/instrumentação , Nanotecnologia/métodos , Água/química , Animais , Catálise , Compostos Férricos/química , Ferritinas/química , Cavalos , Temperatura Alta , Ferro/metabolismo , Microscopia Eletrônica de Transmissão , Oxigênio/metabolismo , Sonicação , Espectroscopia de Infravermelho com Transformada de Fourier , Baço/metabolismo , Temperatura , Raios UltravioletaRESUMO
The preparation of nanocomposite materials from carbon nanotubes (CNTs) and metal or metal oxide nanoparticles has important implications to the development of advanced catalytic and sensory materials. This paper reports findings of an investigation of the preparation of nanoparticle-coated carbon nanotube composite materials. Our approach involves molecularly mediated assembly of monolayer-capped nanoparticles on multiwalled CNTs via a combination of hydrophobic and hydrogen-bonding interactions between the capping/mediating shell and the CNT surface. The advantage of this route is that it does not require tedious surface modification of CNTs. We have demonstrated its simplicity and effectiveness for assembling alkanethiolate-capped gold nanoparticles of 2-5 nm core sizes onto CNTs with controllable coverage and spatially isolated character. The loading and distribution of the nanoparticles on CNTs depend on the relative concentrations of gold nanoparticles, CNTs, and mediating or linking agents. The composite nanomaterials can be dispersed in organic solvent, and the capping/linking shells can be removed by thermal treatment to produce controllable nanocrystals on the CNT surfaces. The nanocomposite materials are characterized using transmission electron microscopy and Fourier transform infrared spectroscopy techniques. The results will be discussed in terms of developing advanced catalytic and sensory nanomaterials.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Nanotubos de Carbono/química , Ligação de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Microscopia Eletrônica de Transmissão , Tamanho da Partícula , Sensibilidade e Especificidade , Espectroscopia de Infravermelho com Transformada de Fourier , Compostos de Sulfidrila/química , Propriedades de SuperfícieRESUMO
The understanding of surface properties of core-shell type nanoparticles is important for exploiting the unique nanostructured catalytic properties. We report herein findings of a spectroscopic investigation of the thermal treatment of such nanoparticle assemblies. We have studied assemblies of gold nanocrystals of approximately 2 nm core sizes that are capped by alkanethiolate shells and are assembled by covalent or hydrogen-bonding linkages on a substrate as a model system. The structural evolution of the nanoparticle assemblies treated at different temperatures was probed by several spectroscopic techniques, including UV-visible, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The results show that the capping/linking shell molecules can be effectively removed to produce controllable surface and optical properties. The data further revealed that the thermally induced evolution of the surface plasmon resonance property of gold nanoparticles is dependent on the chemical nature of the linker molecule. The spectral evolution is discussed in terms of changes in particle size, interparticle distance, and dielectric medium properties, which has important implications for controlled preparation and thermal processing of core-shell nanostructured metal catalysts.
RESUMO
The ability to control the size and shape of nanoparticle assemblies is essential for the ultimate applications in sensors, catalysis, medical diagnostics, information storage, and quantum computation. This report demonstrates a novel mediator-template strategy toward this ability by exploring molecular driving forces exerted by a tridentate thioether as a mediator and tetraoctylammonium bromide as a templating agent. A combination of the ligand mediation, the surfactant templating, and their relative concentrations served as the driving forces. This combination leads to unprecedented spherical assemblies of gold nanoparticles in controllable sizes via manipulation of the relative concentrations of mediating and templating components.
Assuntos
Ouro/química , Nanotecnologia/métodos , Compostos de Organossilício/química , Sulfetos/química , Microscopia EletrônicaRESUMO
The ability to prepare nanostructured metal catalysts requires the ability to control size and interparticle spatial and surface access properties. In this work, we report novel findings of an atomic force microscopic investigation of a controlled thermal activation strategy of gold catalysts nanostructured via molecular wiring or linking on a substrate surface. Gold nanocrystals of approximately 2 nm diameter capped by decanethiolate and wired by 1,9-nonanedithiolate on mica substrates were studied as a model system. By manipulating the activation temperature (200-250 degrees C), the capping/wiring molecules can be removed to produce controllable particle size and interparticle spatial morphology. The electrocatalytic activity of the activated nanostructures toward methanol oxidation, which is of fundamental importance to fuel cell catalysis, has been demonstrated. The novelty of the findings is the viability of a thermal activation strategy of core-shell nanostructured catalysts based on molecularly predefined interparticle spatial properties on a substrate, which upon further investigation may form the basis for spatially controllable nanostructured catalysts.